From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [PULL 04/50] block: rename bdrv_invalidate_cache_all, blk_invalidate_cache and test_sync_op_invalidate_cache
Date: Fri, 4 Mar 2022 17:46:25 +0100 [thread overview]
Message-ID: <20220304164711.474713-5-kwolf@redhat.com> (raw)
In-Reply-To: <20220304164711.474713-1-kwolf@redhat.com>
From: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Following the bdrv_activate renaming, change also the name
of the respective callers.
bdrv_invalidate_cache_all -> bdrv_activate_all
blk_invalidate_cache -> blk_activate
test_sync_op_invalidate_cache -> test_sync_op_activate
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/block/block.h | 2 +-
include/sysemu/block-backend.h | 2 +-
block.c | 2 +-
block/block-backend.c | 2 +-
hw/block/pflash_cfi01.c | 2 +-
hw/nvram/spapr_nvram.c | 2 +-
migration/block.c | 2 +-
migration/migration.c | 14 +++++++-------
migration/savevm.c | 6 +++---
monitor/qmp-cmds.c | 2 +-
tests/unit/test-block-iothread.c | 6 +++---
11 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/include/block/block.h b/include/block/block.h
index 18cd336911..d27e616d29 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -493,8 +493,8 @@ int bdrv_co_ioctl(BlockDriverState *bs, int req, void *buf);
/* Invalidate any cached metadata used by image formats */
int generated_co_wrapper bdrv_invalidate_cache(BlockDriverState *bs,
Error **errp);
-void bdrv_invalidate_cache_all(Error **errp);
int bdrv_activate(BlockDriverState *bs, Error **errp);
+void bdrv_activate_all(Error **errp);
int bdrv_inactivate_all(void);
/* Ensure contents are flushed to disk. */
diff --git a/include/sysemu/block-backend.h b/include/sysemu/block-backend.h
index e5e1524f06..6c5104cd4a 100644
--- a/include/sysemu/block-backend.h
+++ b/include/sysemu/block-backend.h
@@ -206,7 +206,7 @@ bool blk_is_writable(BlockBackend *blk);
bool blk_is_sg(BlockBackend *blk);
bool blk_enable_write_cache(BlockBackend *blk);
void blk_set_enable_write_cache(BlockBackend *blk, bool wce);
-void blk_invalidate_cache(BlockBackend *blk, Error **errp);
+void blk_activate(BlockBackend *blk, Error **errp);
bool blk_is_inserted(BlockBackend *blk);
bool blk_is_available(BlockBackend *blk);
void blk_lock_medium(BlockBackend *blk, bool locked);
diff --git a/block.c b/block.c
index 7746727a47..5e65f134f8 100644
--- a/block.c
+++ b/block.c
@@ -6473,7 +6473,7 @@ int coroutine_fn bdrv_co_invalidate_cache(BlockDriverState *bs, Error **errp)
return 0;
}
-void bdrv_invalidate_cache_all(Error **errp)
+void bdrv_activate_all(Error **errp)
{
BlockDriverState *bs;
BdrvNextIterator it;
diff --git a/block/block-backend.c b/block/block-backend.c
index c516113a36..98bfcd5cf2 100644
--- a/block/block-backend.c
+++ b/block/block-backend.c
@@ -1880,7 +1880,7 @@ void blk_set_enable_write_cache(BlockBackend *blk, bool wce)
blk->enable_write_cache = wce;
}
-void blk_invalidate_cache(BlockBackend *blk, Error **errp)
+void blk_activate(BlockBackend *blk, Error **errp)
{
BlockDriverState *bs = blk_bs(blk);
diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
index 81f9f971d8..74c7190302 100644
--- a/hw/block/pflash_cfi01.c
+++ b/hw/block/pflash_cfi01.c
@@ -1023,7 +1023,7 @@ static void postload_update_cb(void *opaque, bool running, RunState state)
{
PFlashCFI01 *pfl = opaque;
- /* This is called after bdrv_invalidate_cache_all. */
+ /* This is called after bdrv_activate_all. */
qemu_del_vm_change_state_handler(pfl->vmstate);
pfl->vmstate = NULL;
diff --git a/hw/nvram/spapr_nvram.c b/hw/nvram/spapr_nvram.c
index fbfdf47e26..18b43be7f6 100644
--- a/hw/nvram/spapr_nvram.c
+++ b/hw/nvram/spapr_nvram.c
@@ -219,7 +219,7 @@ static void postload_update_cb(void *opaque, bool running, RunState state)
{
SpaprNvram *nvram = opaque;
- /* This is called after bdrv_invalidate_cache_all. */
+ /* This is called after bdrv_activate_all. */
qemu_del_vm_change_state_handler(nvram->vmstate);
nvram->vmstate = NULL;
diff --git a/migration/block.c b/migration/block.c
index a950977855..077a413325 100644
--- a/migration/block.c
+++ b/migration/block.c
@@ -932,7 +932,7 @@ static int block_load(QEMUFile *f, void *opaque, int version_id)
return -EINVAL;
}
- blk_invalidate_cache(blk, &local_err);
+ blk_activate(blk, &local_err);
if (local_err) {
error_report_err(local_err);
return -EINVAL;
diff --git a/migration/migration.c b/migration/migration.c
index 9cc344514b..695f0f2900 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -503,9 +503,9 @@ static void process_incoming_migration_bh(void *opaque)
if (!migrate_late_block_activate() ||
(autostart && (!global_state_received() ||
global_state_get_runstate() == RUN_STATE_RUNNING))) {
- /* Make sure all file formats flush their mutable metadata.
+ /* Make sure all file formats throw away their mutable metadata.
* If we get an error here, just don't restart the VM yet. */
- bdrv_invalidate_cache_all(&local_err);
+ bdrv_activate_all(&local_err);
if (local_err) {
error_report_err(local_err);
local_err = NULL;
@@ -591,8 +591,8 @@ static void process_incoming_migration_co(void *opaque)
/* we get COLO info, and know if we are in COLO mode */
if (!ret && migration_incoming_colo_enabled()) {
- /* Make sure all file formats flush their mutable metadata */
- bdrv_invalidate_cache_all(&local_err);
+ /* Make sure all file formats throw away their mutable metadata */
+ bdrv_activate_all(&local_err);
if (local_err) {
error_report_err(local_err);
goto fail;
@@ -1932,7 +1932,7 @@ static void migrate_fd_cancel(MigrationState *s)
if (s->state == MIGRATION_STATUS_CANCELLING && s->block_inactive) {
Error *local_err = NULL;
- bdrv_invalidate_cache_all(&local_err);
+ bdrv_activate_all(&local_err);
if (local_err) {
error_report_err(local_err);
} else {
@@ -3111,7 +3111,7 @@ fail:
*/
Error *local_err = NULL;
- bdrv_invalidate_cache_all(&local_err);
+ bdrv_activate_all(&local_err);
if (local_err) {
error_report_err(local_err);
}
@@ -3256,7 +3256,7 @@ fail_invalidate:
Error *local_err = NULL;
qemu_mutex_lock_iothread();
- bdrv_invalidate_cache_all(&local_err);
+ bdrv_activate_all(&local_err);
if (local_err) {
error_report_err(local_err);
} else {
diff --git a/migration/savevm.c b/migration/savevm.c
index 967ff80547..6b79f9673a 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1438,7 +1438,7 @@ int qemu_savevm_state_complete_precopy_non_iterable(QEMUFile *f,
if (inactivate_disks) {
/* Inactivate before sending QEMU_VM_EOF so that the
- * bdrv_invalidate_cache_all() on the other end won't fail. */
+ * bdrv_activate_all() on the other end won't fail. */
ret = bdrv_inactivate_all();
if (ret) {
error_report("%s: bdrv_inactivate_all() failed (%d)",
@@ -2013,9 +2013,9 @@ static void loadvm_postcopy_handle_run_bh(void *opaque)
trace_loadvm_postcopy_handle_run_bh("after announce");
- /* Make sure all file formats flush their mutable metadata.
+ /* Make sure all file formats throw away their mutable metadata.
* If we get an error here, just don't restart the VM yet. */
- bdrv_invalidate_cache_all(&local_err);
+ bdrv_activate_all(&local_err);
if (local_err) {
error_report_err(local_err);
local_err = NULL;
diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c
index df97582dd4..ad82c275c4 100644
--- a/monitor/qmp-cmds.c
+++ b/monitor/qmp-cmds.c
@@ -144,7 +144,7 @@ void qmp_cont(Error **errp)
* If there are no inactive block nodes (e.g. because the VM was just
* paused rather than completing a migration), bdrv_inactivate_all() simply
* doesn't do anything. */
- bdrv_invalidate_cache_all(&local_err);
+ bdrv_activate_all(&local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
diff --git a/tests/unit/test-block-iothread.c b/tests/unit/test-block-iothread.c
index 378a7b7869..94718c9319 100644
--- a/tests/unit/test-block-iothread.c
+++ b/tests/unit/test-block-iothread.c
@@ -279,7 +279,7 @@ static void test_sync_op_check(BdrvChild *c)
g_assert_cmpint(ret, ==, -ENOTSUP);
}
-static void test_sync_op_invalidate_cache(BdrvChild *c)
+static void test_sync_op_activate(BdrvChild *c)
{
/* Early success: Image is not inactive */
bdrv_activate(c->bs, NULL);
@@ -325,8 +325,8 @@ const SyncOpTest sync_op_tests[] = {
.name = "/sync-op/check",
.fn = test_sync_op_check,
}, {
- .name = "/sync-op/invalidate_cache",
- .fn = test_sync_op_invalidate_cache,
+ .name = "/sync-op/activate",
+ .fn = test_sync_op_activate,
},
};
--
2.35.1
next prev parent reply other threads:[~2022-03-04 16:50 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-04 16:46 [PULL 00/50] Block layer patches Kevin Wolf
2022-03-04 16:46 ` [PULL 01/50] crypto: perform permission checks under BQL Kevin Wolf
2022-03-04 16:46 ` [PULL 02/50] crypto: distinguish between main loop and I/O in block_crypto_amend_options_generic_luks Kevin Wolf
2022-03-04 16:46 ` [PULL 03/50] block: introduce bdrv_activate Kevin Wolf
2022-03-04 16:46 ` Kevin Wolf [this message]
2022-03-04 16:46 ` [PULL 05/50] block: move BQL logic of bdrv_co_invalidate_cache in bdrv_activate Kevin Wolf
2022-03-04 16:46 ` [PULL 06/50] tls: add macros for coroutine-safe TLS variables Kevin Wolf
2022-03-04 16:46 ` [PULL 07/50] util/async: replace __thread with QEMU TLS macros Kevin Wolf
2022-03-04 16:46 ` [PULL 08/50] rcu: use coroutine " Kevin Wolf
2022-03-04 16:46 ` [PULL 09/50] cpus: use coroutine TLS macros for iothread_locked Kevin Wolf
2022-03-04 16:46 ` [PULL 10/50] os-posix: Add os_set_daemonize() Kevin Wolf
2022-03-04 16:46 ` [PULL 11/50] qsd: Add pre-init argument parsing pass Kevin Wolf
2022-03-04 16:46 ` [PULL 12/50] qsd: Add --daemonize Kevin Wolf
2022-03-04 16:46 ` [PULL 13/50] iotests/185: Add post-READY quit tests Kevin Wolf
2022-03-04 16:46 ` [PULL 14/50] main-loop.h: introduce qemu_in_main_thread() Kevin Wolf
2022-03-04 16:46 ` [PULL 15/50] main loop: macros to mark GS and I/O functions Kevin Wolf
2022-03-04 16:46 ` [PULL 16/50] include/block/block: split header into I/O and global state API Kevin Wolf
2022-03-04 16:46 ` [PULL 17/50] assertions for block " Kevin Wolf
2022-03-04 16:46 ` [PULL 18/50] IO_CODE and IO_OR_GS_CODE for block I/O API Kevin Wolf
2022-03-04 16:46 ` [PULL 19/50] block/export/fuse.c: allow writable exports to take RESIZE permission Kevin Wolf
2022-03-04 16:46 ` [PULL 20/50] include/sysemu/block-backend: split header into I/O and global state (GS) API Kevin Wolf
2022-03-04 16:46 ` [PULL 21/50] block/block-backend.c: assertions for block-backend Kevin Wolf
2022-03-16 12:44 ` Philippe Mathieu-Daudé
2022-03-16 12:53 ` Philippe Mathieu-Daudé
2022-03-16 14:46 ` Emanuele Giuseppe Esposito
2022-03-16 15:25 ` Philippe Mathieu-Daudé
2022-03-16 16:02 ` Kevin Wolf
2022-03-16 12:54 ` Emanuele Giuseppe Esposito
2022-03-04 16:46 ` [PULL 22/50] IO_CODE and IO_OR_GS_CODE for block-backend I/O API Kevin Wolf
2022-03-04 16:46 ` [PULL 23/50] block.c: assertions to the block layer permissions API Kevin Wolf
2022-03-04 16:46 ` [PULL 24/50] include/block/block_int: split header into I/O and global state API Kevin Wolf
2022-03-04 16:46 ` [PULL 25/50] assertions for block_int " Kevin Wolf
2022-03-04 16:46 ` [PULL 26/50] IO_CODE and IO_OR_GS_CODE for block_int I/O API Kevin Wolf
2022-03-04 16:46 ` [PULL 27/50] block: introduce assert_bdrv_graph_writable Kevin Wolf
2022-03-04 16:46 ` [PULL 28/50] include/block/blockjob_int.h: split header into I/O and GS API Kevin Wolf
2022-03-04 16:46 ` [PULL 29/50] GS and IO CODE macros for blockjob_int.h Kevin Wolf
2022-03-04 16:46 ` [PULL 30/50] block.c: add assertions to static functions Kevin Wolf
2022-03-04 16:46 ` [PULL 31/50] include/block/blockjob.h: global state API Kevin Wolf
2022-03-04 16:46 ` [PULL 32/50] assertions for blockjob.h " Kevin Wolf
2022-03-04 16:46 ` [PULL 33/50] include/sysemu/blockdev.h: " Kevin Wolf
2022-03-04 16:46 ` [PULL 34/50] assertions for blockdev.h " Kevin Wolf
2022-03-04 16:46 ` [PULL 35/50] include/block/snapshot: global state API + assertions Kevin Wolf
2022-03-04 16:46 ` [PULL 36/50] block/copy-before-write.h: " Kevin Wolf
2022-03-04 16:46 ` [PULL 37/50] block/coroutines: I/O and "I/O or GS" API Kevin Wolf
2022-03-04 16:46 ` [PULL 38/50] block_int-common.h: split function pointers in BlockDriver Kevin Wolf
2022-03-04 16:47 ` [PULL 39/50] block_int-common.h: assertions in the callers of BlockDriver function pointers Kevin Wolf
2022-03-04 16:47 ` [PULL 40/50] block_int-common.h: split function pointers in BdrvChildClass Kevin Wolf
2022-03-04 16:47 ` [PULL 41/50] block_int-common.h: assertions in the callers of BdrvChildClass function pointers Kevin Wolf
2022-03-04 16:47 ` [PULL 42/50] block-backend-common.h: split function pointers in BlockDevOps Kevin Wolf
2022-03-04 16:47 ` [PULL 43/50] job.h: split function pointers in JobDriver Kevin Wolf
2022-03-04 16:47 ` [PULL 44/50] job.h: assertions in the callers of JobDriver function pointers Kevin Wolf
2022-03-04 16:47 ` [PULL 45/50] block: Make bdrv_refresh_limits() non-recursive Kevin Wolf
2022-03-04 16:47 ` [PULL 46/50] iotests: Allow using QMP with the QSD Kevin Wolf
2022-03-04 16:47 ` [PULL 47/50] iotests/graph-changes-while-io: New test Kevin Wolf
2022-03-04 16:47 ` [PULL 48/50] tests/qemu-iotests: Rework the checks and spots using GNU sed Kevin Wolf
2022-03-04 16:47 ` [PULL 49/50] block/amend: Always call .bdrv_amend_clean() Kevin Wolf
2022-03-04 16:47 ` [PULL 50/50] block/amend: Keep strong reference to BDS Kevin Wolf
2022-03-05 14:43 ` [PULL 00/50] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220304164711.474713-5-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).