qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Laurent Vivier <lvivier@redhat.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	Thomas Huth <thuth@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Eric Auger <eric.auger@redhat.com>
Subject: Re: [PULL 16/45] tests/qtest/libqos: Add generic pci host bridge in arm-virt machine
Date: Mon, 7 Mar 2022 05:02:44 -0500	[thread overview]
Message-ID: <20220307050209-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20220304133556.233983-17-mst@redhat.com>

On Fri, Mar 04, 2022 at 08:39:36AM -0500, Michael S. Tsirkin wrote:
> From: Eric Auger <eric.auger@redhat.com>
> 
> Up to now the virt-machine node contains a virtio-mmio node.
> However no driver produces any PCI interface node. Hence, PCI
> tests cannot be run with aarch64 binary.
> 
> Add a GPEX driver node that produces a pci interface node. This latter
> then can be consumed by all the pci tests. One of the first motivation
> was to be able to run the virtio-iommu-pci tests.
> 
> We still face an issue with pci hotplug tests as hotplug cannot happen
> on the pcie root bus and require a generic root port. This will be
> addressed later on.
> 
> We force cpu=max along with aarch64/virt machine as some PCI tests
> require high MMIO regions to be available.
> 
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
> 
> Message-Id: <20220210145254.157790-6-eric.auger@redhat.com>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>

Pls note I dropped this in v2 due to issues on powerpc.  Feel free to resubmit. Thanks!

> ---
>  tests/qtest/libqos/generic-pcihost.h  |  54 ++++++
>  tests/qtest/libqos/arm-virt-machine.c |  19 ++-
>  tests/qtest/libqos/generic-pcihost.c  | 231 ++++++++++++++++++++++++++
>  tests/qtest/libqos/meson.build        |   1 +
>  4 files changed, 301 insertions(+), 4 deletions(-)
>  create mode 100644 tests/qtest/libqos/generic-pcihost.h
>  create mode 100644 tests/qtest/libqos/generic-pcihost.c
> 
> diff --git a/tests/qtest/libqos/generic-pcihost.h b/tests/qtest/libqos/generic-pcihost.h
> new file mode 100644
> index 0000000000..c693c769df
> --- /dev/null
> +++ b/tests/qtest/libqos/generic-pcihost.h
> @@ -0,0 +1,54 @@
> +/*
> + * libqos Generic PCI bindings and generic pci host bridge
> + *
> + * Copyright Red Hat Inc., 2022
> + *
> + * Authors:
> + *  Eric Auger <eric.auger@redhat.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#ifndef LIBQOS_GENERIC_PCIHOST_H
> +#define LIBQOS_GENERIC_PCIHOST_H
> +
> +#include "pci.h"
> +#include "malloc.h"
> +#include "qgraph.h"
> +
> +typedef struct QGenericPCIBus {
> +    QOSGraphObject obj;
> +    QPCIBus bus;
> +    uint64_t gpex_pio_base;
> +    uint64_t ecam_alloc_ptr;
> +} QGenericPCIBus;
> +
> +/*
> + * qpci_init_generic():
> + * @ret: A valid QGenericPCIBus * pointer
> + * @qts: The %QTestState
> + * @alloc: A previously initialized @alloc providing memory for @qts
> + * @bool: devices can be hotplugged on this bus
> + *
> + * This function initializes an already allocated
> + * QGenericPCIBus object.
> + */
> +void qpci_init_generic(QGenericPCIBus *ret, QTestState *qts,
> +                       QGuestAllocator *alloc, bool hotpluggable);
> +
> +/* QGenericPCIHost */
> +
> +typedef struct QGenericPCIHost QGenericPCIHost;
> +
> +struct QGenericPCIHost {
> +    QOSGraphObject obj;
> +    QGenericPCIBus pci;
> +};
> +
> +QOSGraphObject *generic_pcihost_get_device(void *obj, const char *device);
> +void qos_create_generic_pcihost(QGenericPCIHost *host,
> +                                QTestState *qts,
> +                                QGuestAllocator *alloc);
> +
> +#endif
> diff --git a/tests/qtest/libqos/arm-virt-machine.c b/tests/qtest/libqos/arm-virt-machine.c
> index e0f5932284..96da0dde54 100644
> --- a/tests/qtest/libqos/arm-virt-machine.c
> +++ b/tests/qtest/libqos/arm-virt-machine.c
> @@ -22,6 +22,8 @@
>  #include "malloc.h"
>  #include "qgraph.h"
>  #include "virtio-mmio.h"
> +#include "generic-pcihost.h"
> +#include "hw/pci/pci_regs.h"
>  
>  #define ARM_PAGE_SIZE               4096
>  #define VIRTIO_MMIO_BASE_ADDR       0x0A003E00
> @@ -35,6 +37,7 @@ struct QVirtMachine {
>      QOSGraphObject obj;
>      QGuestAllocator alloc;
>      QVirtioMMIODevice virtio_mmio;
> +    QGenericPCIHost bridge;
>  };
>  
>  static void virt_destructor(QOSGraphObject *obj)
> @@ -57,11 +60,13 @@ static void *virt_get_driver(void *object, const char *interface)
>  static QOSGraphObject *virt_get_device(void *obj, const char *device)
>  {
>      QVirtMachine *machine = obj;
> -    if (!g_strcmp0(device, "virtio-mmio")) {
> +    if (!g_strcmp0(device, "generic-pcihost")) {
> +        return &machine->bridge.obj;
> +    } else if (!g_strcmp0(device, "virtio-mmio")) {
>          return &machine->virtio_mmio.obj;
>      }
>  
> -    fprintf(stderr, "%s not present in arm/virtio\n", device);
> +    fprintf(stderr, "%s not present in arm/virt\n", device);
>      g_assert_not_reached();
>  }
>  
> @@ -76,16 +81,22 @@ static void *qos_create_machine_arm_virt(QTestState *qts)
>      qvirtio_mmio_init_device(&machine->virtio_mmio, qts, VIRTIO_MMIO_BASE_ADDR,
>                               VIRTIO_MMIO_SIZE);
>  
> +    qos_create_generic_pcihost(&machine->bridge, qts, &machine->alloc);
> +
>      machine->obj.get_device = virt_get_device;
>      machine->obj.get_driver = virt_get_driver;
>      machine->obj.destructor = virt_destructor;
>      return machine;
>  }
>  
> -static void virtio_mmio_register_nodes(void)
> +static void virt_machine_register_nodes(void)
>  {
>      qos_node_create_machine("arm/virt", qos_create_machine_arm_virt);
>      qos_node_contains("arm/virt", "virtio-mmio", NULL);
> +
> +    qos_node_create_machine_args("aarch64/virt", qos_create_machine_arm_virt,
> +                                 " -cpu max");
> +    qos_node_contains("aarch64/virt", "generic-pcihost", NULL);
>  }
>  
> -libqos_init(virtio_mmio_register_nodes);
> +libqos_init(virt_machine_register_nodes);
> diff --git a/tests/qtest/libqos/generic-pcihost.c b/tests/qtest/libqos/generic-pcihost.c
> new file mode 100644
> index 0000000000..704bbc3473
> --- /dev/null
> +++ b/tests/qtest/libqos/generic-pcihost.c
> @@ -0,0 +1,231 @@
> +/*
> + * libqos PCI bindings for generic PCI
> + *
> + * Copyright Red Hat Inc., 2022
> + *
> + * Authors:
> + *  Eric Auger   <eric.auger@redhat.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "libqtest.h"
> +#include "generic-pcihost.h"
> +#include "qapi/qmp/qdict.h"
> +#include "hw/pci/pci_regs.h"
> +
> +#include "qemu/module.h"
> +
> +/* QGenericPCIHost */
> +
> +QOSGraphObject *generic_pcihost_get_device(void *obj, const char *device)
> +{
> +    QGenericPCIHost *host = obj;
> +    if (!g_strcmp0(device, "pci-bus-generic")) {
> +        return &host->pci.obj;
> +    }
> +    fprintf(stderr, "%s not present in generic-pcihost\n", device);
> +    g_assert_not_reached();
> +}
> +
> +void qos_create_generic_pcihost(QGenericPCIHost *host,
> +                                QTestState *qts,
> +                                QGuestAllocator *alloc)
> +{
> +    host->obj.get_device = generic_pcihost_get_device;
> +    qpci_init_generic(&host->pci, qts, alloc, false);
> +}
> +
> +static uint8_t qpci_generic_pio_readb(QPCIBus *bus, uint32_t addr)
> +{
> +    QGenericPCIBus *s = container_of(bus, QGenericPCIBus, bus);
> +
> +    return qtest_readb(bus->qts, s->gpex_pio_base + addr);
> +}
> +
> +static void qpci_generic_pio_writeb(QPCIBus *bus, uint32_t addr, uint8_t val)
> +{
> +    QGenericPCIBus *s = container_of(bus, QGenericPCIBus, bus);
> +
> +    qtest_writeb(bus->qts, s->gpex_pio_base + addr,  val);
> +}
> +
> +static uint16_t qpci_generic_pio_readw(QPCIBus *bus, uint32_t addr)
> +{
> +    QGenericPCIBus *s = container_of(bus, QGenericPCIBus, bus);
> +
> +    return qtest_readw(bus->qts, s->gpex_pio_base + addr);
> +}
> +
> +static void qpci_generic_pio_writew(QPCIBus *bus, uint32_t addr, uint16_t val)
> +{
> +    QGenericPCIBus *s = container_of(bus, QGenericPCIBus, bus);
> +
> +    qtest_writew(bus->qts, s->gpex_pio_base + addr, val);
> +}
> +
> +static uint32_t qpci_generic_pio_readl(QPCIBus *bus, uint32_t addr)
> +{
> +    QGenericPCIBus *s = container_of(bus, QGenericPCIBus, bus);
> +
> +    return qtest_readl(bus->qts, s->gpex_pio_base + addr);
> +}
> +
> +static void qpci_generic_pio_writel(QPCIBus *bus, uint32_t addr, uint32_t val)
> +{
> +    QGenericPCIBus *s = container_of(bus, QGenericPCIBus, bus);
> +
> +    qtest_writel(bus->qts, s->gpex_pio_base + addr, val);
> +}
> +
> +static uint64_t qpci_generic_pio_readq(QPCIBus *bus, uint32_t addr)
> +{
> +    QGenericPCIBus *s = container_of(bus, QGenericPCIBus, bus);
> +
> +    return qtest_readq(bus->qts, s->gpex_pio_base + addr);
> +}
> +
> +static void qpci_generic_pio_writeq(QPCIBus *bus, uint32_t addr, uint64_t val)
> +{
> +    QGenericPCIBus *s = container_of(bus, QGenericPCIBus, bus);
> +
> +    qtest_writeq(bus->qts, s->gpex_pio_base + addr, val);
> +}
> +
> +static void qpci_generic_memread(QPCIBus *bus, uint32_t addr, void *buf, size_t len)
> +{
> +    qtest_memread(bus->qts, addr, buf, len);
> +}
> +
> +static void qpci_generic_memwrite(QPCIBus *bus, uint32_t addr,
> +                                  const void *buf, size_t len)
> +{
> +    qtest_memwrite(bus->qts, addr, buf, len);
> +}
> +
> +static uint8_t qpci_generic_config_readb(QPCIBus *bus, int devfn, uint8_t offset)
> +{
> +    QGenericPCIBus *gbus = container_of(bus, QGenericPCIBus, bus);
> +    uint64_t addr = gbus->ecam_alloc_ptr + ((0 << 20) | (devfn << 12) | offset);
> +    uint8_t val;
> +
> +    qtest_memread(bus->qts, addr, &val, 1);
> +    return val;
> +}
> +
> +static uint16_t qpci_generic_config_readw(QPCIBus *bus, int devfn, uint8_t offset)
> +{
> +    QGenericPCIBus *gbus = container_of(bus, QGenericPCIBus, bus);
> +    uint64_t addr = gbus->ecam_alloc_ptr + ((0 << 20) | (devfn << 12) | offset);
> +    uint16_t val;
> +
> +    qtest_memread(bus->qts, addr, &val, 2);
> +    return val;
> +}
> +
> +static uint32_t qpci_generic_config_readl(QPCIBus *bus, int devfn, uint8_t offset)
> +{
> +    QGenericPCIBus *gbus = container_of(bus, QGenericPCIBus, bus);
> +    uint64_t addr = gbus->ecam_alloc_ptr + ((0 << 20) | (devfn << 12) | offset);
> +    uint32_t val;
> +
> +    qtest_memread(bus->qts, addr, &val, 4);
> +    return val;
> +}
> +
> +static void
> +qpci_generic_config_writeb(QPCIBus *bus, int devfn, uint8_t offset, uint8_t value)
> +{
> +    QGenericPCIBus *gbus = container_of(bus, QGenericPCIBus, bus);
> +    uint64_t addr = gbus->ecam_alloc_ptr + ((0 << 20) | (devfn << 12) | offset);
> +    uint32_t val = value;
> +
> +    qtest_memwrite(bus->qts, addr, &val, 1);
> +}
> +
> +static void
> +qpci_generic_config_writew(QPCIBus *bus, int devfn, uint8_t offset, uint16_t value)
> +{
> +    QGenericPCIBus *gbus = container_of(bus, QGenericPCIBus, bus);
> +    uint64_t addr = gbus->ecam_alloc_ptr + ((0 << 20) | (devfn << 12) | offset);
> +    uint32_t val = value;
> +
> +    qtest_memwrite(bus->qts, addr, &val, 2);
> +}
> +
> +static void
> +qpci_generic_config_writel(QPCIBus *bus, int devfn, uint8_t offset, uint32_t value)
> +{
> +    QGenericPCIBus *gbus = container_of(bus, QGenericPCIBus, bus);
> +    uint64_t addr = gbus->ecam_alloc_ptr + ((0 << 20) | (devfn << 12) | offset);
> +    uint32_t val = value;
> +
> +    qtest_memwrite(bus->qts, addr, &val, 4);
> +}
> +
> +static void *qpci_generic_get_driver(void *obj, const char *interface)
> +{
> +    QGenericPCIBus *qpci = obj;
> +    if (!g_strcmp0(interface, "pci-bus")) {
> +        return &qpci->bus;
> +    }
> +    fprintf(stderr, "%s not present in pci-bus-generic\n", interface);
> +    g_assert_not_reached();
> +}
> +
> +void qpci_init_generic(QGenericPCIBus *qpci, QTestState *qts,
> +                       QGuestAllocator *alloc, bool hotpluggable)
> +{
> +    assert(qts);
> +
> +    qpci->gpex_pio_base = 0x3eff0000;
> +    qpci->bus.not_hotpluggable = !hotpluggable;
> +    qpci->bus.has_buggy_msi = false;
> +
> +    qpci->bus.pio_readb = qpci_generic_pio_readb;
> +    qpci->bus.pio_readw = qpci_generic_pio_readw;
> +    qpci->bus.pio_readl = qpci_generic_pio_readl;
> +    qpci->bus.pio_readq = qpci_generic_pio_readq;
> +
> +    qpci->bus.pio_writeb = qpci_generic_pio_writeb;
> +    qpci->bus.pio_writew = qpci_generic_pio_writew;
> +    qpci->bus.pio_writel = qpci_generic_pio_writel;
> +    qpci->bus.pio_writeq = qpci_generic_pio_writeq;
> +
> +    qpci->bus.memread = qpci_generic_memread;
> +    qpci->bus.memwrite = qpci_generic_memwrite;
> +
> +    qpci->bus.config_readb = qpci_generic_config_readb;
> +    qpci->bus.config_readw = qpci_generic_config_readw;
> +    qpci->bus.config_readl = qpci_generic_config_readl;
> +
> +    qpci->bus.config_writeb = qpci_generic_config_writeb;
> +    qpci->bus.config_writew = qpci_generic_config_writew;
> +    qpci->bus.config_writel = qpci_generic_config_writel;
> +
> +    qpci->bus.qts = qts;
> +    qpci->bus.pio_alloc_ptr = 0x0000;
> +    qpci->bus.pio_limit = 0x10000;
> +    qpci->bus.mmio_alloc_ptr = 0x10000000;
> +    qpci->bus.mmio_limit = 0x2eff0000;
> +    qpci->ecam_alloc_ptr = 0x4010000000;
> +
> +    qpci->obj.get_driver = qpci_generic_get_driver;
> +}
> +
> +static void qpci_generic_register_nodes(void)
> +{
> +    qos_node_create_driver("pci-bus-generic", NULL);
> +    qos_node_produces("pci-bus-generic", "pci-bus");
> +}
> +
> +static void qpci_generic_pci_register_nodes(void)
> +{
> +    qos_node_create_driver("generic-pcihost", NULL);
> +    qos_node_contains("generic-pcihost", "pci-bus-generic", NULL);
> +}
> +
> +libqos_init(qpci_generic_register_nodes);
> +libqos_init(qpci_generic_pci_register_nodes);
> diff --git a/tests/qtest/libqos/meson.build b/tests/qtest/libqos/meson.build
> index e988d15791..8c8ee15553 100644
> --- a/tests/qtest/libqos/meson.build
> +++ b/tests/qtest/libqos/meson.build
> @@ -42,6 +42,7 @@ libqos_srcs = files('../libqtest.c',
>          'virtio-scsi.c',
>          'virtio-serial.c',
>          'virtio-iommu.c',
> +        'generic-pcihost.c',
>  
>          # qgraph machines:
>          'aarch64-xlnx-zcu102-machine.c',
> -- 
> MST
> 



  reply	other threads:[~2022-03-07 10:26 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-04 13:36 [PULL 00/45] virtio,pc,pci: features, cleanups, fixes Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 01/45] qom: assert integer does not overflow Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 02/45] ACPI ERST: specification for ERST support Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 03/45] MAINTAINERS: no need to add my name explicitly as a reviewer for VIOT tables Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 04/45] docs/acpi/erst: add device id for ACPI ERST device in pci-ids.txt Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 05/45] hw/acpi/erst: clean up unused IS_UEFI_CPER_RECORD macro Michael S. Tsirkin
2022-03-04 13:37 ` [PULL 06/45] hw/smbios: code cleanup - use macro definitions for table header handles Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 07/45] hw/smbios: fix overlapping table handle numbers with large memory vms Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 08/45] hw/smbios: add assertion to ensure handles of tables 19 and 32 do not collide Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 09/45] vhost-user: remove VirtQ notifier restore Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 10/45] vhost-user: fix VirtQ notifier cleanup Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 11/45] virtio: fix the condition for iommu_platform not supported Michael S. Tsirkin
2022-03-04 13:38 ` [PULL 12/45] hw/vhost-user-i2c: Add support for VIRTIO_I2C_F_ZERO_LENGTH_REQUEST Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 13/45] tests/qtest/libqos/pci: Introduce pio_limit Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 14/45] tests/qtest/libqos: Skip hotplug tests if pci root bus is not hotpluggable Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 15/45] tests/qtest/vhost-user-blk-test: Temporary hack to get tests passing on aarch64 Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 16/45] tests/qtest/libqos: Add generic pci host bridge in arm-virt machine Michael S. Tsirkin
2022-03-07 10:02   ` Michael S. Tsirkin [this message]
2022-03-07 11:07     ` Eric Auger
2022-03-04 13:39 ` [PULL 17/45] hw/virtio: vdpa: Fix leak of host-notifier memory-region Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 18/45] vhost-vdpa: make notifiers _init()/_uninit() symmetric Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 19/45] intel_iommu: support snoop control Michael S. Tsirkin
2022-03-04 13:39 ` [PULL 20/45] hw/i386: Improve bounds checking in OVMF table parsing Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 21/45] hw/i386: Replace magic number with field length calculation Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 22/45] virtio-iommu: Default to bypass during boot Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 23/45] virtio-iommu: Support bypass domain Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 24/45] tests/qtest/virtio-iommu-test: Check bypass config Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 25/45] hw/i386/pc_piix: Mark the machine types from version 1.4 to 1.7 as deprecated Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 26/45] hw/pci-bridge/pxb: Fix missing swizzle Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 27/45] virtio-net: Unlimit tx queue size if peer is vdpa Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 28/45] pcie: Add support for Single Root I/O Virtualization (SR/IOV) Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 29/45] pcie: Add some SR/IOV API documentation in docs/pcie_sriov.txt Michael S. Tsirkin
2022-03-04 13:40 ` [PULL 30/45] pcie: Add a helper to the SR/IOV API Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 31/45] pcie: Add 1.2 version token for the Power Management Capability Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 32/45] pci-bridge/xio3130_upstream: Fix error handling Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 33/45] pci-bridge/xio3130_downstream: " Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 34/45] headers: Add pvpanic.h Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 35/45] hw/misc/pvpanic: Use standard headers instead Michael S. Tsirkin
2022-03-04 13:41 ` [PULL 36/45] pci: show id info when pci BDF conflict Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 37/45] pci: expose TYPE_XIO3130_DOWNSTREAM name Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 38/45] acpi: pcihp: pcie: set power on cap on parent slot Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 39/45] pc: add option to disable PS/2 mouse/keyboard Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 40/45] vhost-vsock: detach the virqueue element in case of error Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 41/45] x86: cleanup unused compat_apic_id_mode Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 42/45] event_notifier: add event_notifier_get_wfd() Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 43/45] vhost: use wfd on functions setting vring call fd Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 44/45] configure, meson: allow enabling vhost-user on all POSIX systems Michael S. Tsirkin
2022-03-04 13:42 ` [PULL 45/45] docs: vhost-user: add subsection for non-Linux platforms Michael S. Tsirkin
2022-03-04 22:13 ` [PULL 00/45] virtio,pc,pci: features, cleanups, fixes Peter Maydell
2022-03-06 10:37   ` Michael S. Tsirkin
2022-03-07 10:48   ` Eric Auger
2022-03-07 11:55     ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220307050209-mutt-send-email-mst@kernel.org \
    --to=mst@redhat.com \
    --cc=eric.auger@redhat.com \
    --cc=lvivier@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).