[PATCH 1/3] hw/display/cirrus_vga: Clean up indentation in pci_cirrus_vga_realize()

[Thomas Huth <thuth@redhat.com>]

Most of the code in this function had been indented with 5 spaces instead
of 4. Since 4 is our preferred style, remove one space in the bad lines here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/display/cirrus_vga.c | 57 +++++++++++++++++++++--------------------
 1 file changed, 29 insertions(+), 28 deletions(-)

diff --git a/hw/display/cirrus_vga.c b/hw/display/cirrus_vga.c
index fdca6ca659..7da1be3e12 100644
--- a/hw/display/cirrus_vga.c
+++ b/hw/display/cirrus_vga.c
@@ -2940,27 +2940,28 @@ void cirrus_init_common(CirrusVGAState *s, Object *owner,
 
 static void pci_cirrus_vga_realize(PCIDevice *dev, Error **errp)
 {
-     PCICirrusVGAState *d = PCI_CIRRUS_VGA(dev);
-     CirrusVGAState *s = &d->cirrus_vga;
-     PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
-     int16_t device_id = pc->device_id;
-
-     /* follow real hardware, cirrus card emulated has 4 MB video memory.
-       Also accept 8 MB/16 MB for backward compatibility. */
-     if (s->vga.vram_size_mb != 4 && s->vga.vram_size_mb != 8 &&
-         s->vga.vram_size_mb != 16) {
-         error_setg(errp, "Invalid cirrus_vga ram size '%u'",
-                    s->vga.vram_size_mb);
-         return;
-     }
-     /* setup VGA */
-     vga_common_init(&s->vga, OBJECT(dev));
-     cirrus_init_common(s, OBJECT(dev), device_id, 1, pci_address_space(dev),
-                        pci_address_space_io(dev));
-     s->vga.con = graphic_console_init(DEVICE(dev), 0, s->vga.hw_ops, &s->vga);
-
-     /* setup PCI */
+    PCICirrusVGAState *d = PCI_CIRRUS_VGA(dev);
+    CirrusVGAState *s = &d->cirrus_vga;
+    PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
+    int16_t device_id = pc->device_id;
+
+    /*
+     * Follow real hardware, cirrus card emulated has 4 MB video memory.
+     * Also accept 8 MB/16 MB for backward compatibility.
+     */
+    if (s->vga.vram_size_mb != 4 && s->vga.vram_size_mb != 8 &&
+        s->vga.vram_size_mb != 16) {
+        error_setg(errp, "Invalid cirrus_vga ram size '%u'",
+                   s->vga.vram_size_mb);
+        return;
+    }
+    /* setup VGA */
+    vga_common_init(&s->vga, OBJECT(dev));
+    cirrus_init_common(s, OBJECT(dev), device_id, 1, pci_address_space(dev),
+                       pci_address_space_io(dev));
+    s->vga.con = graphic_console_init(DEVICE(dev), 0, s->vga.hw_ops, &s->vga);
 
+    /* setup PCI */
     memory_region_init(&s->pci_bar, OBJECT(dev), "cirrus-pci-bar0", 0x2000000);
 
     /* XXX: add byte swapping apertures */
@@ -2968,14 +2969,14 @@ static void pci_cirrus_vga_realize(PCIDevice *dev, Error **errp)
     memory_region_add_subregion(&s->pci_bar, 0x1000000,
                                 &s->cirrus_linear_bitblt_io);
 
-     /* setup memory space */
-     /* memory #0 LFB */
-     /* memory #1 memory-mapped I/O */
-     /* XXX: s->vga.vram_size must be a power of two */
-     pci_register_bar(&d->dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH, &s->pci_bar);
-     if (device_id == CIRRUS_ID_CLGD5446) {
-         pci_register_bar(&d->dev, 1, 0, &s->cirrus_mmio_io);
-     }
+    /* setup memory space */
+    /* memory #0 LFB */
+    /* memory #1 memory-mapped I/O */
+    /* XXX: s->vga.vram_size must be a power of two */
+    pci_register_bar(&d->dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH, &s->pci_bar);
+    if (device_id == CIRRUS_ID_CLGD5446) {
+        pci_register_bar(&d->dev, 1, 0, &s->cirrus_mmio_io);
+    }
 }
 
 static Property pci_vga_cirrus_properties[] = {
-- 
2.27.0