From: Lukasz Maniak <lukasz.maniak@linux.intel.com>
To: qemu-devel@nongnu.org
Cc: fam@euphon.net, kwolf@redhat.com, lukasz.maniak@linux.intel.com,
stefanha@redhat.com, qemu-block@nongnu.org, mst@redhat.com,
k.jensen@samsung.com, armbru@redhat.com, f4bug@amsat.org,
kbusch@kernel.org, its@irrelevant.dk, hreitz@redhat.com,
xypron.glpk@gmx.de, lukasz.gieryk@linux.intel.com,
ani@anisinha.ca, imammedo@redhat.com
Subject: [PATCH v7 05/12] hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime
Date: Fri, 18 Mar 2022 20:18:12 +0100 [thread overview]
Message-ID: <20220318191819.1711831-6-lukasz.maniak@linux.intel.com> (raw)
In-Reply-To: <20220318191819.1711831-1-lukasz.maniak@linux.intel.com>
From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
The NVMe device defines two properties: max_ioqpairs, msix_qsize. Having
them as constants is problematic for SR-IOV support.
SR-IOV introduces virtual resources (queues, interrupts) that can be
assigned to PF and its dependent VFs. Each device, following a reset,
should work with the configured number of queues. A single constant is
no longer sufficient to hold the whole state.
This patch tries to solve the problem by introducing additional
variables in NvmeCtrl’s state. The variables for, e.g., managing queues
are therefore organized as:
- n->params.max_ioqpairs – no changes, constant set by the user
- n->(mutable_state) – (not a part of this patch) user-configurable,
specifies number of queues available _after_
reset
- n->conf_ioqpairs - (new) used in all the places instead of the ‘old’
n->params.max_ioqpairs; initialized in realize()
and updated during reset() to reflect user’s
changes to the mutable state
Since the number of available i/o queues and interrupts can change in
runtime, buffers for sq/cqs and the MSIX-related structures are
allocated big enough to handle the limits, to completely avoid the
complicated reallocation. A helper function (nvme_update_msixcap_ts)
updates the corresponding capability register, to signal configuration
changes.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
---
hw/nvme/ctrl.c | 52 ++++++++++++++++++++++++++++++++++----------------
hw/nvme/nvme.h | 2 ++
2 files changed, 38 insertions(+), 16 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index e6d6e5840af..12372038075 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -448,12 +448,12 @@ static bool nvme_nsid_valid(NvmeCtrl *n, uint32_t nsid)
static int nvme_check_sqid(NvmeCtrl *n, uint16_t sqid)
{
- return sqid < n->params.max_ioqpairs + 1 && n->sq[sqid] != NULL ? 0 : -1;
+ return sqid < n->conf_ioqpairs + 1 && n->sq[sqid] != NULL ? 0 : -1;
}
static int nvme_check_cqid(NvmeCtrl *n, uint16_t cqid)
{
- return cqid < n->params.max_ioqpairs + 1 && n->cq[cqid] != NULL ? 0 : -1;
+ return cqid < n->conf_ioqpairs + 1 && n->cq[cqid] != NULL ? 0 : -1;
}
static void nvme_inc_cq_tail(NvmeCQueue *cq)
@@ -4290,8 +4290,7 @@ static uint16_t nvme_create_sq(NvmeCtrl *n, NvmeRequest *req)
trace_pci_nvme_err_invalid_create_sq_cqid(cqid);
return NVME_INVALID_CQID | NVME_DNR;
}
- if (unlikely(!sqid || sqid > n->params.max_ioqpairs ||
- n->sq[sqid] != NULL)) {
+ if (unlikely(!sqid || sqid > n->conf_ioqpairs || n->sq[sqid] != NULL)) {
trace_pci_nvme_err_invalid_create_sq_sqid(sqid);
return NVME_INVALID_QID | NVME_DNR;
}
@@ -4643,8 +4642,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeRequest *req)
trace_pci_nvme_create_cq(prp1, cqid, vector, qsize, qflags,
NVME_CQ_FLAGS_IEN(qflags) != 0);
- if (unlikely(!cqid || cqid > n->params.max_ioqpairs ||
- n->cq[cqid] != NULL)) {
+ if (unlikely(!cqid || cqid > n->conf_ioqpairs || n->cq[cqid] != NULL)) {
trace_pci_nvme_err_invalid_create_cq_cqid(cqid);
return NVME_INVALID_QID | NVME_DNR;
}
@@ -4660,7 +4658,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeRequest *req)
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
- if (unlikely(vector >= n->params.msix_qsize)) {
+ if (unlikely(vector >= n->conf_msix_qsize)) {
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
@@ -5261,13 +5259,12 @@ defaults:
break;
case NVME_NUMBER_OF_QUEUES:
- result = (n->params.max_ioqpairs - 1) |
- ((n->params.max_ioqpairs - 1) << 16);
+ result = (n->conf_ioqpairs - 1) | ((n->conf_ioqpairs - 1) << 16);
trace_pci_nvme_getfeat_numq(result);
break;
case NVME_INTERRUPT_VECTOR_CONF:
iv = dw11 & 0xffff;
- if (iv >= n->params.max_ioqpairs + 1) {
+ if (iv >= n->conf_ioqpairs + 1) {
return NVME_INVALID_FIELD | NVME_DNR;
}
@@ -5423,10 +5420,10 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeRequest *req)
trace_pci_nvme_setfeat_numq((dw11 & 0xffff) + 1,
((dw11 >> 16) & 0xffff) + 1,
- n->params.max_ioqpairs,
- n->params.max_ioqpairs);
- req->cqe.result = cpu_to_le32((n->params.max_ioqpairs - 1) |
- ((n->params.max_ioqpairs - 1) << 16));
+ n->conf_ioqpairs,
+ n->conf_ioqpairs);
+ req->cqe.result = cpu_to_le32((n->conf_ioqpairs - 1) |
+ ((n->conf_ioqpairs - 1) << 16));
break;
case NVME_ASYNCHRONOUS_EVENT_CONF:
n->features.async_config = dw11;
@@ -5901,8 +5898,24 @@ static void nvme_process_sq(void *opaque)
}
}
+static void nvme_update_msixcap_ts(PCIDevice *pci_dev, uint32_t table_size)
+{
+ uint8_t *config;
+
+ if (!msix_present(pci_dev)) {
+ return;
+ }
+
+ assert(table_size > 0 && table_size <= pci_dev->msix_entries_nr);
+
+ config = pci_dev->config + pci_dev->msix_cap;
+ pci_set_word_by_mask(config + PCI_MSIX_FLAGS, PCI_MSIX_FLAGS_QSIZE,
+ table_size - 1);
+}
+
static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst)
{
+ PCIDevice *pci_dev = &n->parent_obj;
NvmeNamespace *ns;
int i;
@@ -5932,15 +5945,17 @@ static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst)
g_free(event);
}
- if (!pci_is_vf(&n->parent_obj) && n->params.sriov_max_vfs) {
+ if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
if (rst != NVME_RESET_CONTROLLER) {
- pcie_sriov_pf_disable_vfs(&n->parent_obj);
+ pcie_sriov_pf_disable_vfs(pci_dev);
}
}
n->aer_queued = 0;
n->outstanding_aers = 0;
n->qs_created = false;
+
+ nvme_update_msixcap_ts(pci_dev, n->conf_msix_qsize);
}
static void nvme_ctrl_shutdown(NvmeCtrl *n)
@@ -6651,6 +6666,9 @@ static void nvme_init_state(NvmeCtrl *n)
NvmeSecCtrlEntry *sctrl;
int i;
+ n->conf_ioqpairs = n->params.max_ioqpairs;
+ n->conf_msix_qsize = n->params.msix_qsize;
+
/* add one to max_ioqpairs to account for the admin queue pair */
n->reg_size = pow2ceil(sizeof(NvmeBar) +
2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE);
@@ -6812,6 +6830,8 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
}
}
+ nvme_update_msixcap_ts(pci_dev, n->conf_msix_qsize);
+
if (n->params.cmb_size_mb) {
nvme_init_cmb(n, pci_dev);
}
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index 4ca6cb2bac1..5bd6ac698bc 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -438,6 +438,8 @@ typedef struct NvmeCtrl {
uint64_t starttime_ms;
uint16_t temperature;
uint8_t smart_critical_warning;
+ uint32_t conf_msix_qsize;
+ uint32_t conf_ioqpairs;
struct {
MemoryRegion mem;
--
2.25.1
next prev parent reply other threads:[~2022-03-18 19:22 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 01/12] hw/nvme: Add support for SR-IOV Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 02/12] hw/nvme: Add support for Primary Controller Capabilities Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 03/12] hw/nvme: Add support for Secondary Controller List Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 04/12] hw/nvme: Implement the Function Level Reset Lukasz Maniak
2022-03-18 19:18 ` Lukasz Maniak [this message]
2022-03-18 19:18 ` [PATCH v7 06/12] hw/nvme: Remove reg_size variable and update BAR0 size calculation Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 07/12] hw/nvme: Calculate BAR attributes in a function Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 08/12] hw/nvme: Initialize capability structures for primary/secondary controllers Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 09/12] hw/nvme: Add support for the Virtualization Management command Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 10/12] docs: Add documentation for SR-IOV and Virtualization Enhancements Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 11/12] hw/nvme: Update the initalization place for the AER queue Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 12/12] hw/acpi: Make the PCI hot-plug aware of SR-IOV Lukasz Maniak
2022-03-31 12:38 ` Igor Mammedov
2022-04-04 9:41 ` Łukasz Gieryk
2022-04-20 10:59 ` Lukasz Maniak
2022-04-20 11:59 ` Michael S. Tsirkin
2022-04-20 12:02 ` [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Michael S. Tsirkin
2022-04-20 12:12 ` Klaus Jensen
2022-04-20 14:50 ` Lukasz Maniak
2022-04-28 19:56 ` Klaus Jensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220318191819.1711831-6-lukasz.maniak@linux.intel.com \
--to=lukasz.maniak@linux.intel.com \
--cc=ani@anisinha.ca \
--cc=armbru@redhat.com \
--cc=f4bug@amsat.org \
--cc=fam@euphon.net \
--cc=hreitz@redhat.com \
--cc=imammedo@redhat.com \
--cc=its@irrelevant.dk \
--cc=k.jensen@samsung.com \
--cc=kbusch@kernel.org \
--cc=kwolf@redhat.com \
--cc=lukasz.gieryk@linux.intel.com \
--cc=mst@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).