qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Vivier <laurent@vivier.eu>
To: qemu-devel@nongnu.org
Cc: "Andreas K . Hüttel" <dilfridge@gentoo.org>,
	"Richard Henderson" <richard.henderson@linaro.org>,
	"Laurent Vivier" <laurent@vivier.eu>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"WANG Xuerui" <xen0n@gentoo.org>
Subject: [PULL 01/10] linux-user: Fix syscall parameter handling for MIPS n32
Date: Thu, 24 Mar 2022 09:20:07 +0100	[thread overview]
Message-ID: <20220324082016.3463521-2-laurent@vivier.eu> (raw)
In-Reply-To: <20220324082016.3463521-1-laurent@vivier.eu>

From: WANG Xuerui <xen0n@gentoo.org>

The MIPS n32 ABI is basically n64 with the address space (i.e. pointer
width) shrinked to 32 bits. Meanwhile the current code treats it as
o32-like based on TARGET_ABI_BITS, which causes problems with n32
syscalls utilizing 64-bit offsets, like pread64, affecting most (if not
all) recently built n32 binaries.

This partially solves issue #909 ("qemu-mipsn32(el) user mode emulator
fails to execute any recently built n32 binaries"); with this change
applied, the built qemu-mipsn32el is able to progress beyond the
pread64, and finish _dl_start_user for the "getting ld.so load libc.so"
case. The program later dies with SIGBUS, though, due to _dl_start_user
not maintaining stack alignment after removing ld.so itself from argv,
and qemu-user starting to enforce alignment recently, but that is
orthogonal to the issue here; the more common case of chrooting is
working, verified with my own-built Gentoo n32 sysroot. (Depending on
the exact ISA used, one may have to explicitly specify QEMU_CPU, which
is the case for my chroot.)

Buglink: https://gitlab.com/qemu-project/qemu/-/issues/909
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220320052259.1610883-1-xen0n@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
 linux-user/user-internals.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/linux-user/user-internals.h b/linux-user/user-internals.h
index a8fdd6933b23..ee152ccfaa8f 100644
--- a/linux-user/user-internals.h
+++ b/linux-user/user-internals.h
@@ -112,7 +112,7 @@ static inline int is_error(abi_long ret)
     return (abi_ulong)ret >= (abi_ulong)(-4096);
 }
 
-#if TARGET_ABI_BITS == 32
+#if (TARGET_ABI_BITS == 32) && !defined(TARGET_ABI_MIPSN32)
 static inline uint64_t target_offset64(uint32_t word0, uint32_t word1)
 {
 #ifdef TARGET_WORDS_BIGENDIAN
@@ -121,7 +121,7 @@ static inline uint64_t target_offset64(uint32_t word0, uint32_t word1)
     return ((uint64_t)word1 << 32) | word0;
 #endif
 }
-#else /* TARGET_ABI_BITS == 32 */
+#else /* TARGET_ABI_BITS == 32 && !defined(TARGET_ABI_MIPSN32) */
 static inline uint64_t target_offset64(uint64_t word0, uint64_t word1)
 {
     return word0;
@@ -136,7 +136,7 @@ static inline int regpairs_aligned(void *cpu_env, int num)
 {
     return ((((CPUARMState *)cpu_env)->eabi) == 1) ;
 }
-#elif defined(TARGET_MIPS) && (TARGET_ABI_BITS == 32)
+#elif defined(TARGET_MIPS) && defined(TARGET_ABI_MIPSO32)
 static inline int regpairs_aligned(void *cpu_env, int num) { return 1; }
 #elif defined(TARGET_PPC) && !defined(TARGET_PPC64)
 /*
-- 
2.35.1



  reply	other threads:[~2022-03-24  8:30 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-24  8:20 [PULL 00/10] Linux user for 7.0 patches Laurent Vivier
2022-03-24  8:20 ` Laurent Vivier [this message]
2022-03-24  8:20 ` [PULL 02/10] linux-user/alpha: Fix sigsuspend for big-endian hosts Laurent Vivier
2022-03-24  8:20 ` [PULL 03/10] linux-user: Split out helpers for sigsuspend Laurent Vivier
2022-03-24  8:20 ` [PULL 04/10] linux-user: Properly handle sigset arg to pselect Laurent Vivier
2022-03-24  8:20 ` [PULL 05/10] linux-user: Properly handle sigset arg to epoll_pwait Laurent Vivier
2022-03-24  8:20 ` [PULL 06/10] linux-user: Properly handle sigset arg to ppoll Laurent Vivier
2022-03-24  8:20 ` [PULL 07/10] linux-user: Fix missing space in error message Laurent Vivier
2022-03-24  8:20 ` [PULL 08/10] linux-user/arm: Implement __kernel_memory_barrier Laurent Vivier
2022-03-24  8:20 ` [PULL 09/10] linux-user/arm: Implement __kernel_cmpxchg with host atomics Laurent Vivier
2022-03-24  8:20 ` [PULL 10/10] linux-user/arm: Implement __kernel_cmpxchg64 " Laurent Vivier
2022-03-24 20:08 ` [PULL 00/10] Linux user for 7.0 patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220324082016.3463521-2-laurent@vivier.eu \
    --to=laurent@vivier.eu \
    --cc=dilfridge@gentoo.org \
    --cc=f4bug@amsat.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=xen0n@gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).