From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 50/61] target/arm: Remove fpexc32_access
Date: Fri, 22 Apr 2022 11:04:21 +0100 [thread overview]
Message-ID: <20220422100432.2288247-51-peter.maydell@linaro.org> (raw)
In-Reply-To: <20220422100432.2288247-1-peter.maydell@linaro.org>
From: Richard Henderson <richard.henderson@linaro.org>
This function is incorrect in that it does not properly consider
CPTR_EL2.FPEN. We've already got another mechanism for raising
an FPU access trap: ARM_CP_FPU, so use that instead.
Remove CP_ACCESS_TRAP_FP_EL{2,3}, which becomes unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu.h | 5 -----
target/arm/helper.c | 17 ++---------------
target/arm/op_helper.c | 13 -------------
3 files changed, 2 insertions(+), 33 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index d2a34f6ea8a..db8ff044497 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -2807,11 +2807,6 @@ typedef enum CPAccessResult {
/* As CP_ACCESS_UNCATEGORIZED, but for traps directly to EL2 or EL3 */
CP_ACCESS_TRAP_UNCATEGORIZED_EL2 = 5,
CP_ACCESS_TRAP_UNCATEGORIZED_EL3 = 6,
- /* Access fails and results in an exception syndrome for an FP access,
- * trapped directly to EL2 or EL3
- */
- CP_ACCESS_TRAP_FP_EL2 = 7,
- CP_ACCESS_TRAP_FP_EL3 = 8,
} CPAccessResult;
/* Access functions for coprocessor registers. These cannot fail and
diff --git a/target/arm/helper.c b/target/arm/helper.c
index f1e91b197e2..63397bbac1d 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -4784,18 +4784,6 @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri,
}
}
-static CPAccessResult fpexc32_access(CPUARMState *env, const ARMCPRegInfo *ri,
- bool isread)
-{
- if ((env->cp15.cptr_el[2] & CPTR_TFP) && arm_current_el(env) == 2) {
- return CP_ACCESS_TRAP_FP_EL2;
- }
- if (env->cp15.cptr_el[3] & CPTR_TFP) {
- return CP_ACCESS_TRAP_FP_EL3;
- }
- return CP_ACCESS_OK;
-}
-
static void sdcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
@@ -5097,9 +5085,8 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.access = PL1_RW, .readfn = spsel_read, .writefn = spsel_write },
{ .name = "FPEXC32_EL2", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 4, .crn = 5, .crm = 3, .opc2 = 0,
- .type = ARM_CP_ALIAS,
- .fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]),
- .access = PL2_RW, .accessfn = fpexc32_access },
+ .access = PL2_RW, .type = ARM_CP_ALIAS | ARM_CP_FPU,
+ .fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]) },
{ .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0,
.access = PL2_RW, .resetvalue = 0,
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index 70b42b55fd0..2b87e8808b6 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -691,19 +691,6 @@ void HELPER(access_check_cp_reg)(CPUARMState *env, void *rip, uint32_t syndrome,
target_el = 3;
syndrome = syn_uncategorized();
break;
- case CP_ACCESS_TRAP_FP_EL2:
- target_el = 2;
- /* Since we are an implementation that takes exceptions on a trapped
- * conditional insn only if the insn has passed its condition code
- * check, we take the IMPDEF choice to always report CV=1 COND=0xe
- * (which is also the required value for AArch64 traps).
- */
- syndrome = syn_fp_access_trap(1, 0xe, false);
- break;
- case CP_ACCESS_TRAP_FP_EL3:
- target_el = 3;
- syndrome = syn_fp_access_trap(1, 0xe, false);
- break;
default:
g_assert_not_reached();
}
--
2.25.1
next prev parent reply other threads:[~2022-04-22 11:35 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-22 10:03 [PULL 00/61] target-arm queue Peter Maydell
2022-04-22 10:03 ` [PULL 01/61] hw/intc/arm_gicv3_its: Add missing blank line Peter Maydell
2022-04-22 10:03 ` [PULL 02/61] hw/intc/arm_gicv3: Sanity-check num-cpu property Peter Maydell
2022-04-22 10:03 ` [PULL 03/61] hw/intc/arm_gicv3: Insist that redist region capacity matches CPU count Peter Maydell
2022-04-22 10:03 ` [PULL 04/61] hw/intc/arm_gicv3: Report correct PIDR0 values for ID registers Peter Maydell
2022-04-22 10:03 ` [PULL 05/61] target/arm/cpu.c: ignore VIRQ and VFIQ if no EL2 Peter Maydell
2022-04-22 10:03 ` [PULL 06/61] hw/intc/arm_gicv3_its: Factor out "is intid a valid LPI ID?" Peter Maydell
2022-04-22 10:03 ` [PULL 07/61] hw/intc/arm_gicv3_its: Implement GITS_BASER2 for GICv4 Peter Maydell
2022-04-22 10:03 ` [PULL 08/61] hw/intc/arm_gicv3_its: Implement VMAPI and VMAPTI Peter Maydell
2022-04-22 10:03 ` [PULL 09/61] hw/intc/arm_gicv3_its: Implement VMAPP Peter Maydell
2022-04-22 10:03 ` [PULL 10/61] hw/intc/arm_gicv3_its: Distinguish success and error cases of CMD_CONTINUE Peter Maydell
2022-04-22 10:03 ` [PULL 11/61] hw/intc/arm_gicv3_its: Factor out "find ITE given devid, eventid" Peter Maydell
2022-04-22 10:03 ` [PULL 12/61] hw/intc/arm_gicv3_its: Factor out CTE lookup sequence Peter Maydell
2022-04-22 10:03 ` [PULL 13/61] hw/intc/arm_gicv3_its: Split out process_its_cmd() physical interrupt code Peter Maydell
2022-04-22 10:03 ` [PULL 14/61] hw/intc/arm_gicv3_its: Handle virtual interrupts in process_its_cmd() Peter Maydell
2022-04-22 10:03 ` [PULL 15/61] hw/intc/arm_gicv3: Keep pointers to every connected ITS Peter Maydell
2022-04-22 10:03 ` [PULL 16/61] hw/intc/arm_gicv3_its: Implement VMOVP Peter Maydell
2022-04-22 10:03 ` [PULL 17/61] hw/intc/arm_gicv3_its: Implement VSYNC Peter Maydell
2022-04-22 10:03 ` [PULL 18/61] hw/intc/arm_gicv3_its: Implement INV command properly Peter Maydell
2022-04-22 10:03 ` [PULL 19/61] hw/intc/arm_gicv3_its: Implement INV for virtual interrupts Peter Maydell
2022-04-22 10:03 ` [PULL 20/61] hw/intc/arm_gicv3_its: Implement VMOVI Peter Maydell
2022-04-22 10:03 ` [PULL 21/61] hw/intc/arm_gicv3_its: Implement VINVALL Peter Maydell
2022-04-22 10:03 ` [PULL 22/61] hw/intc/arm_gicv3: Implement GICv4's new redistributor frame Peter Maydell
2022-04-22 10:03 ` [PULL 23/61] hw/intc/arm_gicv3: Implement new GICv4 redistributor registers Peter Maydell
2022-04-22 10:03 ` [PULL 24/61] hw/intc/arm_gicv3_cpuif: Split "update vIRQ/vFIQ" from gicv3_cpuif_virt_update() Peter Maydell
2022-04-22 10:03 ` [PULL 25/61] hw/intc/arm_gicv3_cpuif: Support vLPIs Peter Maydell
2022-04-22 10:03 ` [PULL 26/61] hw/intc/arm_gicv3_cpuif: Don't recalculate maintenance irq unnecessarily Peter Maydell
2022-04-22 10:03 ` [PULL 27/61] hw/intc/arm_gicv3_redist: Factor out "update hpplpi for one LPI" logic Peter Maydell
2022-04-22 10:03 ` [PULL 28/61] hw/intc/arm_gicv3_redist: Factor out "update hpplpi for all LPIs" logic Peter Maydell
2022-04-22 10:04 ` [PULL 29/61] hw/intc/arm_gicv3_redist: Recalculate hppvlpi on VPENDBASER writes Peter Maydell
2022-04-22 10:04 ` [PULL 30/61] hw/intc/arm_gicv3_redist: Factor out "update bit in pending table" code Peter Maydell
2022-04-22 10:04 ` [PULL 31/61] hw/intc/arm_gicv3_redist: Implement gicv3_redist_process_vlpi() Peter Maydell
2022-04-22 10:04 ` [PULL 32/61] hw/intc/arm_gicv3_redist: Implement gicv3_redist_vlpi_pending() Peter Maydell
2022-04-22 10:04 ` [PULL 33/61] hw/intc/arm_gicv3_redist: Use set_pending_table_bit() in mov handling Peter Maydell
2022-04-22 10:04 ` [PULL 34/61] hw/intc/arm_gicv3_redist: Implement gicv3_redist_mov_vlpi() Peter Maydell
2022-04-22 10:04 ` [PULL 35/61] hw/intc/arm_gicv3_redist: Implement gicv3_redist_vinvall() Peter Maydell
2022-04-22 10:04 ` [PULL 36/61] hw/intc/arm_gicv3_redist: Implement gicv3_redist_inv_vlpi() Peter Maydell
2022-04-22 10:04 ` [PULL 37/61] hw/intc/arm_gicv3: Update ID and feature registers for GICv4 Peter Maydell
2022-04-22 10:04 ` [PULL 38/61] hw/intc/arm_gicv3: Allow 'revision' property to be set to 4 Peter Maydell
2022-04-22 10:04 ` [PULL 39/61] hw/arm/virt: Use VIRT_GIC_VERSION_* enum values in create_gic() Peter Maydell
2022-04-22 10:04 ` [PULL 40/61] hw/arm/virt: Abstract out calculation of redistributor region capacity Peter Maydell
2022-04-22 10:04 ` [PULL 41/61] hw/arm/virt: Support TCG GICv4 Peter Maydell
2022-04-22 10:04 ` [PULL 42/61] target/arm: Update ISAR fields for ARMv8.8 Peter Maydell
2022-04-22 10:04 ` [PULL 43/61] target/arm: Update SCR_EL3 bits to ARMv8.8 Peter Maydell
2022-04-22 10:04 ` [PULL 44/61] target/arm: Update SCTLR bits to ARMv9.2 Peter Maydell
2022-04-22 10:04 ` [PULL 45/61] target/arm: Change DisasContext.aarch64 to bool Peter Maydell
2022-04-22 10:04 ` [PULL 46/61] target/arm: Change CPUArchState.aarch64 " Peter Maydell
2022-04-22 10:04 ` [PULL 47/61] target/arm: Extend store_cpu_offset to take field size Peter Maydell
2022-04-22 10:04 ` [PULL 48/61] target/arm: Change DisasContext.thumb to bool Peter Maydell
2022-04-22 10:04 ` [PULL 49/61] target/arm: Change CPUArchState.thumb " Peter Maydell
2022-04-22 10:04 ` Peter Maydell [this message]
2022-04-22 10:04 ` [PULL 51/61] target/arm: Split out set_btype_raw Peter Maydell
2022-04-22 10:04 ` [PULL 52/61] target/arm: Split out gen_rebuild_hflags Peter Maydell
2022-04-22 10:04 ` [PULL 53/61] target/arm: Simplify GEN_SHIFT in translate.c Peter Maydell
2022-04-22 10:04 ` [PULL 54/61] target/arm: Simplify gen_sar Peter Maydell
2022-04-22 10:04 ` [PULL 55/61] target/arm: Simplify aa32 DISAS_WFI Peter Maydell
2022-04-22 10:04 ` [PULL 56/61] target/arm: Use tcg_constant in translate-m-nocp.c Peter Maydell
2022-04-22 10:04 ` [PULL 57/61] target/arm: Use tcg_constant in translate-neon.c Peter Maydell
2022-04-22 10:04 ` [PULL 58/61] target/arm: Use smin/smax for do_sat_addsub_32 Peter Maydell
2022-04-22 10:04 ` [PULL 59/61] target/arm: Use tcg_constant in translate-vfp.c Peter Maydell
2022-04-22 10:04 ` [PULL 60/61] target/arm: Use tcg_constant_i32 in translate.h Peter Maydell
2022-04-22 10:04 ` [PULL 61/61] hw/arm/smmuv3: Pass the actual perm to returned IOMMUTLBEntry in smmuv3_translate() Peter Maydell
2022-04-22 11:41 ` [PULL 00/61] target-arm queue Richard Henderson
2022-04-22 13:48 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220422100432.2288247-51-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).