qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 56/61] target/arm: Use tcg_constant in translate-m-nocp.c
Date: Fri, 22 Apr 2022 11:04:27 +0100	[thread overview]
Message-ID: <20220422100432.2288247-57-peter.maydell@linaro.org> (raw)
In-Reply-To: <20220422100432.2288247-1-peter.maydell@linaro.org>

From: Richard Henderson <richard.henderson@linaro.org>

Use tcg_constant_{i32,i64} as appropriate throughout.
This fixes a bug in trans_VSCCLRM() where we were leaking a TCGv.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-m-nocp.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/target/arm/translate-m-nocp.c b/target/arm/translate-m-nocp.c
index d9e144e8eb3..27363a7b4ec 100644
--- a/target/arm/translate-m-nocp.c
+++ b/target/arm/translate-m-nocp.c
@@ -173,7 +173,7 @@ static bool trans_VSCCLRM(DisasContext *s, arg_VSCCLRM *a)
     }
 
     /* Zero the Sregs from btmreg to topreg inclusive. */
-    zero = tcg_const_i64(0);
+    zero = tcg_constant_i64(0);
     if (btmreg & 1) {
         write_neon_element64(zero, btmreg >> 1, 1, MO_32);
         btmreg++;
@@ -187,8 +187,7 @@ static bool trans_VSCCLRM(DisasContext *s, arg_VSCCLRM *a)
     }
     assert(btmreg == topreg + 1);
     if (dc_isar_feature(aa32_mve, s)) {
-        TCGv_i32 z32 = tcg_const_i32(0);
-        store_cpu_field(z32, v7m.vpr);
+        store_cpu_field(tcg_constant_i32(0), v7m.vpr);
     }
 
     clear_eci_state(s);
@@ -512,7 +511,7 @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno,
     }
     case ARM_VFP_FPCXT_NS:
     {
-        TCGv_i32 control, sfpa, fpscr, fpdscr, zero;
+        TCGv_i32 control, sfpa, fpscr, fpdscr;
         TCGLabel *lab_active = gen_new_label();
 
         lookup_tb = true;
@@ -552,10 +551,9 @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno,
         storefn(s, opaque, tmp, true);
         /* If SFPA is zero then set FPSCR from FPDSCR_NS */
         fpdscr = load_cpu_field(v7m.fpdscr[M_REG_NS]);
-        zero = tcg_const_i32(0);
-        tcg_gen_movcond_i32(TCG_COND_EQ, fpscr, sfpa, zero, fpdscr, fpscr);
+        tcg_gen_movcond_i32(TCG_COND_EQ, fpscr, sfpa, tcg_constant_i32(0),
+                            fpdscr, fpscr);
         gen_helper_vfp_set_fpscr(cpu_env, fpscr);
-        tcg_temp_free_i32(zero);
         tcg_temp_free_i32(sfpa);
         tcg_temp_free_i32(fpdscr);
         tcg_temp_free_i32(fpscr);
-- 
2.25.1



  parent reply	other threads:[~2022-04-22 11:18 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-22 10:03 [PULL 00/61] target-arm queue Peter Maydell
2022-04-22 10:03 ` [PULL 01/61] hw/intc/arm_gicv3_its: Add missing blank line Peter Maydell
2022-04-22 10:03 ` [PULL 02/61] hw/intc/arm_gicv3: Sanity-check num-cpu property Peter Maydell
2022-04-22 10:03 ` [PULL 03/61] hw/intc/arm_gicv3: Insist that redist region capacity matches CPU count Peter Maydell
2022-04-22 10:03 ` [PULL 04/61] hw/intc/arm_gicv3: Report correct PIDR0 values for ID registers Peter Maydell
2022-04-22 10:03 ` [PULL 05/61] target/arm/cpu.c: ignore VIRQ and VFIQ if no EL2 Peter Maydell
2022-04-22 10:03 ` [PULL 06/61] hw/intc/arm_gicv3_its: Factor out "is intid a valid LPI ID?" Peter Maydell
2022-04-22 10:03 ` [PULL 07/61] hw/intc/arm_gicv3_its: Implement GITS_BASER2 for GICv4 Peter Maydell
2022-04-22 10:03 ` [PULL 08/61] hw/intc/arm_gicv3_its: Implement VMAPI and VMAPTI Peter Maydell
2022-04-22 10:03 ` [PULL 09/61] hw/intc/arm_gicv3_its: Implement VMAPP Peter Maydell
2022-04-22 10:03 ` [PULL 10/61] hw/intc/arm_gicv3_its: Distinguish success and error cases of CMD_CONTINUE Peter Maydell
2022-04-22 10:03 ` [PULL 11/61] hw/intc/arm_gicv3_its: Factor out "find ITE given devid, eventid" Peter Maydell
2022-04-22 10:03 ` [PULL 12/61] hw/intc/arm_gicv3_its: Factor out CTE lookup sequence Peter Maydell
2022-04-22 10:03 ` [PULL 13/61] hw/intc/arm_gicv3_its: Split out process_its_cmd() physical interrupt code Peter Maydell
2022-04-22 10:03 ` [PULL 14/61] hw/intc/arm_gicv3_its: Handle virtual interrupts in process_its_cmd() Peter Maydell
2022-04-22 10:03 ` [PULL 15/61] hw/intc/arm_gicv3: Keep pointers to every connected ITS Peter Maydell
2022-04-22 10:03 ` [PULL 16/61] hw/intc/arm_gicv3_its: Implement VMOVP Peter Maydell
2022-04-22 10:03 ` [PULL 17/61] hw/intc/arm_gicv3_its: Implement VSYNC Peter Maydell
2022-04-22 10:03 ` [PULL 18/61] hw/intc/arm_gicv3_its: Implement INV command properly Peter Maydell
2022-04-22 10:03 ` [PULL 19/61] hw/intc/arm_gicv3_its: Implement INV for virtual interrupts Peter Maydell
2022-04-22 10:03 ` [PULL 20/61] hw/intc/arm_gicv3_its: Implement VMOVI Peter Maydell
2022-04-22 10:03 ` [PULL 21/61] hw/intc/arm_gicv3_its: Implement VINVALL Peter Maydell
2022-04-22 10:03 ` [PULL 22/61] hw/intc/arm_gicv3: Implement GICv4's new redistributor frame Peter Maydell
2022-04-22 10:03 ` [PULL 23/61] hw/intc/arm_gicv3: Implement new GICv4 redistributor registers Peter Maydell
2022-04-22 10:03 ` [PULL 24/61] hw/intc/arm_gicv3_cpuif: Split "update vIRQ/vFIQ" from gicv3_cpuif_virt_update() Peter Maydell
2022-04-22 10:03 ` [PULL 25/61] hw/intc/arm_gicv3_cpuif: Support vLPIs Peter Maydell
2022-04-22 10:03 ` [PULL 26/61] hw/intc/arm_gicv3_cpuif: Don't recalculate maintenance irq unnecessarily Peter Maydell
2022-04-22 10:03 ` [PULL 27/61] hw/intc/arm_gicv3_redist: Factor out "update hpplpi for one LPI" logic Peter Maydell
2022-04-22 10:03 ` [PULL 28/61] hw/intc/arm_gicv3_redist: Factor out "update hpplpi for all LPIs" logic Peter Maydell
2022-04-22 10:04 ` [PULL 29/61] hw/intc/arm_gicv3_redist: Recalculate hppvlpi on VPENDBASER writes Peter Maydell
2022-04-22 10:04 ` [PULL 30/61] hw/intc/arm_gicv3_redist: Factor out "update bit in pending table" code Peter Maydell
2022-04-22 10:04 ` [PULL 31/61] hw/intc/arm_gicv3_redist: Implement gicv3_redist_process_vlpi() Peter Maydell
2022-04-22 10:04 ` [PULL 32/61] hw/intc/arm_gicv3_redist: Implement gicv3_redist_vlpi_pending() Peter Maydell
2022-04-22 10:04 ` [PULL 33/61] hw/intc/arm_gicv3_redist: Use set_pending_table_bit() in mov handling Peter Maydell
2022-04-22 10:04 ` [PULL 34/61] hw/intc/arm_gicv3_redist: Implement gicv3_redist_mov_vlpi() Peter Maydell
2022-04-22 10:04 ` [PULL 35/61] hw/intc/arm_gicv3_redist: Implement gicv3_redist_vinvall() Peter Maydell
2022-04-22 10:04 ` [PULL 36/61] hw/intc/arm_gicv3_redist: Implement gicv3_redist_inv_vlpi() Peter Maydell
2022-04-22 10:04 ` [PULL 37/61] hw/intc/arm_gicv3: Update ID and feature registers for GICv4 Peter Maydell
2022-04-22 10:04 ` [PULL 38/61] hw/intc/arm_gicv3: Allow 'revision' property to be set to 4 Peter Maydell
2022-04-22 10:04 ` [PULL 39/61] hw/arm/virt: Use VIRT_GIC_VERSION_* enum values in create_gic() Peter Maydell
2022-04-22 10:04 ` [PULL 40/61] hw/arm/virt: Abstract out calculation of redistributor region capacity Peter Maydell
2022-04-22 10:04 ` [PULL 41/61] hw/arm/virt: Support TCG GICv4 Peter Maydell
2022-04-22 10:04 ` [PULL 42/61] target/arm: Update ISAR fields for ARMv8.8 Peter Maydell
2022-04-22 10:04 ` [PULL 43/61] target/arm: Update SCR_EL3 bits to ARMv8.8 Peter Maydell
2022-04-22 10:04 ` [PULL 44/61] target/arm: Update SCTLR bits to ARMv9.2 Peter Maydell
2022-04-22 10:04 ` [PULL 45/61] target/arm: Change DisasContext.aarch64 to bool Peter Maydell
2022-04-22 10:04 ` [PULL 46/61] target/arm: Change CPUArchState.aarch64 " Peter Maydell
2022-04-22 10:04 ` [PULL 47/61] target/arm: Extend store_cpu_offset to take field size Peter Maydell
2022-04-22 10:04 ` [PULL 48/61] target/arm: Change DisasContext.thumb to bool Peter Maydell
2022-04-22 10:04 ` [PULL 49/61] target/arm: Change CPUArchState.thumb " Peter Maydell
2022-04-22 10:04 ` [PULL 50/61] target/arm: Remove fpexc32_access Peter Maydell
2022-04-22 10:04 ` [PULL 51/61] target/arm: Split out set_btype_raw Peter Maydell
2022-04-22 10:04 ` [PULL 52/61] target/arm: Split out gen_rebuild_hflags Peter Maydell
2022-04-22 10:04 ` [PULL 53/61] target/arm: Simplify GEN_SHIFT in translate.c Peter Maydell
2022-04-22 10:04 ` [PULL 54/61] target/arm: Simplify gen_sar Peter Maydell
2022-04-22 10:04 ` [PULL 55/61] target/arm: Simplify aa32 DISAS_WFI Peter Maydell
2022-04-22 10:04 ` Peter Maydell [this message]
2022-04-22 10:04 ` [PULL 57/61] target/arm: Use tcg_constant in translate-neon.c Peter Maydell
2022-04-22 10:04 ` [PULL 58/61] target/arm: Use smin/smax for do_sat_addsub_32 Peter Maydell
2022-04-22 10:04 ` [PULL 59/61] target/arm: Use tcg_constant in translate-vfp.c Peter Maydell
2022-04-22 10:04 ` [PULL 60/61] target/arm: Use tcg_constant_i32 in translate.h Peter Maydell
2022-04-22 10:04 ` [PULL 61/61] hw/arm/smmuv3: Pass the actual perm to returned IOMMUTLBEntry in smmuv3_translate() Peter Maydell
2022-04-22 11:41 ` [PULL 00/61] target-arm queue Richard Henderson
2022-04-22 13:48   ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220422100432.2288247-57-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).