qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Leonardo Bras Soares Passos <lsoaresp@redhat.com>,
	"Daniel P . Berrange" <berrange@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	peterx@redhat.com, Juan Quintela <quintela@redhat.com>
Subject: [PATCH v5 08/21] tests: add multifd migration tests of TLS with x509 credentials
Date: Mon, 25 Apr 2022 19:38:34 -0400	[thread overview]
Message-ID: <20220425233847.10393-9-peterx@redhat.com> (raw)
In-Reply-To: <20220425233847.10393-1-peterx@redhat.com>

From: Daniel P. Berrangé <berrange@redhat.com>

This validates that we correctly handle multifd migration success
and failure scenarios when using TLS with x509 certificates. There
are quite a few different scenarios that matter in relation to
hostname validation, but we skip a couple as we can assume that
the non-multifd coverage applies to some extent.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
 tests/qtest/migration-test.c | 127 +++++++++++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)

diff --git a/tests/qtest/migration-test.c b/tests/qtest/migration-test.c
index f47e4797e2..5ea0b9360a 100644
--- a/tests/qtest/migration-test.c
+++ b/tests/qtest/migration-test.c
@@ -1832,6 +1832,48 @@ test_migrate_multifd_tcp_tls_psk_start_mismatch(QTestState *from,
     return test_migrate_tls_psk_start_mismatch(from, to);
 }
 
+#ifdef CONFIG_TASN1
+static void *
+test_migrate_multifd_tls_x509_start_default_host(QTestState *from,
+                                                 QTestState *to)
+{
+    test_migrate_precopy_tcp_multifd_start_common(from, to, "none");
+    return test_migrate_tls_x509_start_default_host(from, to);
+}
+
+static void *
+test_migrate_multifd_tls_x509_start_override_host(QTestState *from,
+                                                  QTestState *to)
+{
+    test_migrate_precopy_tcp_multifd_start_common(from, to, "none");
+    return test_migrate_tls_x509_start_override_host(from, to);
+}
+
+static void *
+test_migrate_multifd_tls_x509_start_mismatch_host(QTestState *from,
+                                                  QTestState *to)
+{
+    test_migrate_precopy_tcp_multifd_start_common(from, to, "none");
+    return test_migrate_tls_x509_start_mismatch_host(from, to);
+}
+
+static void *
+test_migrate_multifd_tls_x509_start_allow_anon_client(QTestState *from,
+                                                      QTestState *to)
+{
+    test_migrate_precopy_tcp_multifd_start_common(from, to, "none");
+    return test_migrate_tls_x509_start_allow_anon_client(from, to);
+}
+
+static void *
+test_migrate_multifd_tls_x509_start_reject_anon_client(QTestState *from,
+                                                       QTestState *to)
+{
+    test_migrate_precopy_tcp_multifd_start_common(from, to, "none");
+    return test_migrate_tls_x509_start_reject_anon_client(from, to);
+}
+#endif /* CONFIG_TASN1 */
+
 static void test_multifd_tcp_tls_psk_match(void)
 {
     MigrateCommon args = {
@@ -1855,6 +1897,79 @@ static void test_multifd_tcp_tls_psk_mismatch(void)
     };
     test_precopy_common(&args);
 }
+
+#ifdef CONFIG_TASN1
+static void test_multifd_tcp_tls_x509_default_host(void)
+{
+    MigrateCommon args = {
+        .listen_uri = "defer",
+        .start_hook = test_migrate_multifd_tls_x509_start_default_host,
+        .finish_hook = test_migrate_tls_x509_finish,
+    };
+    test_precopy_common(&args);
+}
+
+static void test_multifd_tcp_tls_x509_override_host(void)
+{
+    MigrateCommon args = {
+        .listen_uri = "defer",
+        .start_hook = test_migrate_multifd_tls_x509_start_override_host,
+        .finish_hook = test_migrate_tls_x509_finish,
+    };
+    test_precopy_common(&args);
+}
+
+static void test_multifd_tcp_tls_x509_mismatch_host(void)
+{
+    /*
+     * This has different behaviour to the non-multifd case.
+     *
+     * In non-multifd case when client aborts due to mismatched
+     * cert host, the server has already started trying to load
+     * migration state, and so it exits with I/O  failure.
+     *
+     * In multifd case when client aborts due to mismatched
+     * cert host, the server is still waiting for the other
+     * multifd connections to arrive so hasn't started trying
+     * to load migration state, and thus just aborts the migration
+     * without exiting
+     */
+    MigrateCommon args = {
+        .start = {
+            .hide_stderr = true,
+        },
+        .listen_uri = "defer",
+        .start_hook = test_migrate_multifd_tls_x509_start_mismatch_host,
+        .finish_hook = test_migrate_tls_x509_finish,
+        .result = MIG_TEST_FAIL,
+    };
+    test_precopy_common(&args);
+}
+
+static void test_multifd_tcp_tls_x509_allow_anon_client(void)
+{
+    MigrateCommon args = {
+        .listen_uri = "defer",
+        .start_hook = test_migrate_multifd_tls_x509_start_allow_anon_client,
+        .finish_hook = test_migrate_tls_x509_finish,
+    };
+    test_precopy_common(&args);
+}
+
+static void test_multifd_tcp_tls_x509_reject_anon_client(void)
+{
+    MigrateCommon args = {
+        .start = {
+            .hide_stderr = true,
+        },
+        .listen_uri = "defer",
+        .start_hook = test_migrate_multifd_tls_x509_start_reject_anon_client,
+        .finish_hook = test_migrate_tls_x509_finish,
+        .result = MIG_TEST_FAIL,
+    };
+    test_precopy_common(&args);
+}
+#endif /* CONFIG_TASN1 */
 #endif /* CONFIG_GNUTLS */
 
 /*
@@ -2082,6 +2197,18 @@ int main(int argc, char **argv)
                    test_multifd_tcp_tls_psk_match);
     qtest_add_func("/migration/multifd/tcp/tls/psk/mismatch",
                    test_multifd_tcp_tls_psk_mismatch);
+#ifdef CONFIG_TASN1
+    qtest_add_func("/migration/multifd/tcp/tls/x509/default-host",
+                   test_multifd_tcp_tls_x509_default_host);
+    qtest_add_func("/migration/multifd/tcp/tls/x509/override-host",
+                   test_multifd_tcp_tls_x509_override_host);
+    qtest_add_func("/migration/multifd/tcp/tls/x509/mismatch-host",
+                   test_multifd_tcp_tls_x509_mismatch_host);
+    qtest_add_func("/migration/multifd/tcp/tls/x509/allow-anon-client",
+                   test_multifd_tcp_tls_x509_allow_anon_client);
+    qtest_add_func("/migration/multifd/tcp/tls/x509/reject-anon-client",
+                   test_multifd_tcp_tls_x509_reject_anon_client);
+#endif /* CONFIG_TASN1 */
 #endif /* CONFIG_GNUTLS */
 
     if (kvm_dirty_ring_supported()) {
-- 
2.32.0



  parent reply	other threads:[~2022-04-25 23:48 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-25 23:38 [PATCH v5 00/21] migration: Postcopy Preemption Peter Xu
2022-04-25 23:38 ` [PATCH v5 01/21] tests: fix encoding of IP addresses in x509 certs Peter Xu
2022-04-25 23:38 ` [PATCH v5 02/21] tests: add more helper macros for creating TLS " Peter Xu
2022-04-25 23:38 ` [PATCH v5 03/21] tests: add migration tests of TLS with PSK credentials Peter Xu
2022-04-25 23:38 ` [PATCH v5 04/21] tests: add migration tests of TLS with x509 credentials Peter Xu
2022-04-25 23:38 ` [PATCH v5 05/21] tests: convert XBZRLE migration test to use common helper Peter Xu
2022-04-25 23:38 ` [PATCH v5 06/21] tests: convert multifd migration tests " Peter Xu
2022-04-25 23:38 ` [PATCH v5 07/21] tests: add multifd migration tests of TLS with PSK credentials Peter Xu
2022-04-25 23:38 ` Peter Xu [this message]
2022-04-25 23:38 ` [PATCH v5 09/21] tests: ensure migration status isn't reported as failed Peter Xu
2022-04-25 23:38 ` [PATCH v5 10/21] migration: Add postcopy-preempt capability Peter Xu
2022-04-25 23:38 ` [PATCH v5 11/21] migration: Postcopy preemption preparation on channel creation Peter Xu
2022-05-11 17:08   ` manish.mishra
2022-05-12 16:36     ` Peter Xu
2022-04-25 23:38 ` [PATCH v5 12/21] migration: Postcopy preemption enablement Peter Xu
2022-04-25 23:38 ` [PATCH v5 13/21] migration: Postcopy recover with preempt enabled Peter Xu
2022-05-16 13:31   ` manish.mishra
2022-05-16 14:11     ` Peter Xu
2022-05-16 14:51       ` manish.mishra
2022-05-16 15:32         ` manish.mishra
2022-05-16 15:58         ` Peter Xu
2022-04-25 23:38 ` [PATCH v5 14/21] migration: Create the postcopy preempt channel asynchronously Peter Xu
2022-05-12 17:35   ` Dr. David Alan Gilbert
2022-05-16 15:02   ` manish.mishra
2022-05-16 16:21     ` Peter Xu
2022-04-25 23:38 ` [PATCH v5 15/21] migration: Parameter x-postcopy-preempt-break-huge Peter Xu
2022-05-12 17:42   ` Dr. David Alan Gilbert
2022-05-16 15:20   ` manish.mishra
2022-04-25 23:38 ` [PATCH v5 16/21] migration: Add helpers to detect TLS capability Peter Xu
2022-05-12 17:46   ` Dr. David Alan Gilbert
2022-04-25 23:38 ` [PATCH v5 17/21] migration: Export tls-[creds|hostname|authz] params to cmdline too Peter Xu
2022-05-12 18:03   ` Dr. David Alan Gilbert
2022-05-12 19:05     ` Daniel P. Berrangé
2022-05-12 20:07       ` Peter Xu
2022-04-25 23:38 ` [PATCH v5 18/21] migration: Enable TLS for preempt channel Peter Xu
2022-04-25 23:38 ` [PATCH v5 19/21] tests: Add postcopy tls migration test Peter Xu
2022-04-25 23:38 ` [PATCH v5 20/21] tests: Add postcopy tls recovery " Peter Xu
2022-04-25 23:38 ` [PATCH v5 21/21] tests: Add postcopy preempt tests Peter Xu
2022-05-16 15:25 ` [PATCH v5 00/21] migration: Postcopy Preemption manish.mishra
2022-05-16 16:06   ` Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220425233847.10393-9-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=berrange@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=lsoaresp@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).