From: "Daniel P. Berrangé" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Laurent Vivier" <lvivier@redhat.com>,
"Thomas Huth" <thuth@redhat.com>,
"Daniel P. Berrangé" <berrange@redhat.com>,
"Juan Quintela" <quintela@redhat.com>,
"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
"Peter Xu" <peterx@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>
Subject: [PATCH v3 8/9] tests: add multifd migration tests of TLS with x509 credentials
Date: Tue, 26 Apr 2022 17:00:47 +0100 [thread overview]
Message-ID: <20220426160048.812266-9-berrange@redhat.com> (raw)
In-Reply-To: <20220426160048.812266-1-berrange@redhat.com>
This validates that we correctly handle multifd migration success
and failure scenarios when using TLS with x509 certificates. There
are quite a few different scenarios that matter in relation to
hostname validation, but we skip a couple as we can assume that
the non-multifd coverage applies to some extent.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
tests/qtest/migration-test.c | 127 +++++++++++++++++++++++++++++++++++
1 file changed, 127 insertions(+)
diff --git a/tests/qtest/migration-test.c b/tests/qtest/migration-test.c
index f47e4797e2..5ea0b9360a 100644
--- a/tests/qtest/migration-test.c
+++ b/tests/qtest/migration-test.c
@@ -1832,6 +1832,48 @@ test_migrate_multifd_tcp_tls_psk_start_mismatch(QTestState *from,
return test_migrate_tls_psk_start_mismatch(from, to);
}
+#ifdef CONFIG_TASN1
+static void *
+test_migrate_multifd_tls_x509_start_default_host(QTestState *from,
+ QTestState *to)
+{
+ test_migrate_precopy_tcp_multifd_start_common(from, to, "none");
+ return test_migrate_tls_x509_start_default_host(from, to);
+}
+
+static void *
+test_migrate_multifd_tls_x509_start_override_host(QTestState *from,
+ QTestState *to)
+{
+ test_migrate_precopy_tcp_multifd_start_common(from, to, "none");
+ return test_migrate_tls_x509_start_override_host(from, to);
+}
+
+static void *
+test_migrate_multifd_tls_x509_start_mismatch_host(QTestState *from,
+ QTestState *to)
+{
+ test_migrate_precopy_tcp_multifd_start_common(from, to, "none");
+ return test_migrate_tls_x509_start_mismatch_host(from, to);
+}
+
+static void *
+test_migrate_multifd_tls_x509_start_allow_anon_client(QTestState *from,
+ QTestState *to)
+{
+ test_migrate_precopy_tcp_multifd_start_common(from, to, "none");
+ return test_migrate_tls_x509_start_allow_anon_client(from, to);
+}
+
+static void *
+test_migrate_multifd_tls_x509_start_reject_anon_client(QTestState *from,
+ QTestState *to)
+{
+ test_migrate_precopy_tcp_multifd_start_common(from, to, "none");
+ return test_migrate_tls_x509_start_reject_anon_client(from, to);
+}
+#endif /* CONFIG_TASN1 */
+
static void test_multifd_tcp_tls_psk_match(void)
{
MigrateCommon args = {
@@ -1855,6 +1897,79 @@ static void test_multifd_tcp_tls_psk_mismatch(void)
};
test_precopy_common(&args);
}
+
+#ifdef CONFIG_TASN1
+static void test_multifd_tcp_tls_x509_default_host(void)
+{
+ MigrateCommon args = {
+ .listen_uri = "defer",
+ .start_hook = test_migrate_multifd_tls_x509_start_default_host,
+ .finish_hook = test_migrate_tls_x509_finish,
+ };
+ test_precopy_common(&args);
+}
+
+static void test_multifd_tcp_tls_x509_override_host(void)
+{
+ MigrateCommon args = {
+ .listen_uri = "defer",
+ .start_hook = test_migrate_multifd_tls_x509_start_override_host,
+ .finish_hook = test_migrate_tls_x509_finish,
+ };
+ test_precopy_common(&args);
+}
+
+static void test_multifd_tcp_tls_x509_mismatch_host(void)
+{
+ /*
+ * This has different behaviour to the non-multifd case.
+ *
+ * In non-multifd case when client aborts due to mismatched
+ * cert host, the server has already started trying to load
+ * migration state, and so it exits with I/O failure.
+ *
+ * In multifd case when client aborts due to mismatched
+ * cert host, the server is still waiting for the other
+ * multifd connections to arrive so hasn't started trying
+ * to load migration state, and thus just aborts the migration
+ * without exiting
+ */
+ MigrateCommon args = {
+ .start = {
+ .hide_stderr = true,
+ },
+ .listen_uri = "defer",
+ .start_hook = test_migrate_multifd_tls_x509_start_mismatch_host,
+ .finish_hook = test_migrate_tls_x509_finish,
+ .result = MIG_TEST_FAIL,
+ };
+ test_precopy_common(&args);
+}
+
+static void test_multifd_tcp_tls_x509_allow_anon_client(void)
+{
+ MigrateCommon args = {
+ .listen_uri = "defer",
+ .start_hook = test_migrate_multifd_tls_x509_start_allow_anon_client,
+ .finish_hook = test_migrate_tls_x509_finish,
+ };
+ test_precopy_common(&args);
+}
+
+static void test_multifd_tcp_tls_x509_reject_anon_client(void)
+{
+ MigrateCommon args = {
+ .start = {
+ .hide_stderr = true,
+ },
+ .listen_uri = "defer",
+ .start_hook = test_migrate_multifd_tls_x509_start_reject_anon_client,
+ .finish_hook = test_migrate_tls_x509_finish,
+ .result = MIG_TEST_FAIL,
+ };
+ test_precopy_common(&args);
+}
+#endif /* CONFIG_TASN1 */
#endif /* CONFIG_GNUTLS */
/*
@@ -2082,6 +2197,18 @@ int main(int argc, char **argv)
test_multifd_tcp_tls_psk_match);
qtest_add_func("/migration/multifd/tcp/tls/psk/mismatch",
test_multifd_tcp_tls_psk_mismatch);
+#ifdef CONFIG_TASN1
+ qtest_add_func("/migration/multifd/tcp/tls/x509/default-host",
+ test_multifd_tcp_tls_x509_default_host);
+ qtest_add_func("/migration/multifd/tcp/tls/x509/override-host",
+ test_multifd_tcp_tls_x509_override_host);
+ qtest_add_func("/migration/multifd/tcp/tls/x509/mismatch-host",
+ test_multifd_tcp_tls_x509_mismatch_host);
+ qtest_add_func("/migration/multifd/tcp/tls/x509/allow-anon-client",
+ test_multifd_tcp_tls_x509_allow_anon_client);
+ qtest_add_func("/migration/multifd/tcp/tls/x509/reject-anon-client",
+ test_multifd_tcp_tls_x509_reject_anon_client);
+#endif /* CONFIG_TASN1 */
#endif /* CONFIG_GNUTLS */
if (kvm_dirty_ring_supported()) {
--
2.35.1
next prev parent reply other threads:[~2022-04-26 16:13 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-26 16:00 [PATCH v3 0/9] tests: introduce testing coverage for TLS with migration Daniel P. Berrangé
2022-04-26 16:00 ` [PATCH v3 1/9] tests: fix encoding of IP addresses in x509 certs Daniel P. Berrangé
2022-04-28 9:46 ` Dr. David Alan Gilbert
2022-04-26 16:00 ` [PATCH v3 2/9] tests: add more helper macros for creating TLS " Daniel P. Berrangé
2022-04-28 13:09 ` Eric Blake
2022-04-26 16:00 ` [PATCH v3 3/9] tests: add migration tests of TLS with PSK credentials Daniel P. Berrangé
2022-04-28 13:46 ` Eric Blake
2022-05-09 13:29 ` Dr. David Alan Gilbert
2022-04-26 16:00 ` [PATCH v3 4/9] tests: add migration tests of TLS with x509 credentials Daniel P. Berrangé
2022-04-28 13:59 ` Eric Blake
2022-04-26 16:00 ` [PATCH v3 5/9] tests: convert XBZRLE migration test to use common helper Daniel P. Berrangé
2022-04-26 16:00 ` [PATCH v3 6/9] tests: convert multifd migration tests " Daniel P. Berrangé
2022-04-26 16:00 ` [PATCH v3 7/9] tests: add multifd migration tests of TLS with PSK credentials Daniel P. Berrangé
2022-04-28 14:05 ` Eric Blake
2022-04-26 16:00 ` Daniel P. Berrangé [this message]
2022-04-28 14:13 ` [PATCH v3 8/9] tests: add multifd migration tests of TLS with x509 credentials Eric Blake
2022-04-26 16:00 ` [PATCH v3 9/9] tests: ensure migration status isn't reported as failed Daniel P. Berrangé
2022-04-28 11:40 ` [PATCH v3 0/9] tests: introduce testing coverage for TLS with migration Dr. David Alan Gilbert
2022-05-09 14:11 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220426160048.812266-9-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=dgilbert@redhat.com \
--cc=lvivier@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).