* [PATCH v2 0/8] qapi: Primarily whitespace tweaks
@ 2022-05-03 7:37 Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 1/8] qapi: Drop stray trailing symbol Andrea Bolognani
` (8 more replies)
0 siblings, 9 replies; 15+ messages in thread
From: Andrea Bolognani @ 2022-05-03 7:37 UTC (permalink / raw)
To: qemu-devel
Cc: Juan Quintela, Paolo Bonzini, Vladimir Sementsov-Ogievskiy,
Eric Blake, Dr. David Alan Gilbert, Marcel Apfelbaum, qemu-block,
Philippe Mathieu-Daudé, Eduardo Habkost,
Daniel P. Berrangé, Pavel Dovgalyuk, Markus Armbruster,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
If patch 8/8 is accepted, 7/8 should be squashed into it to reduce
churn.
Changes from [v1]:
* use a more fine-grained split for whitespace changes.
[v1] https://lists.gnu.org/archive/html/qemu-devel/2022-04/msg05406.html
Andrea Bolognani (8):
qapi: Drop stray trailing symbol
qapi: Fix comment indentation
qapi: Add missing separators between sections
qapi: Drop unnecessary empty lines in comments
qapi: Drop unnecessary empty lines outside of comments
qapi: Drop unnecessary whitespace in comments
qapi: Reduce whitespace used for alignment in comments
qapi: Stop using whitespace for alignment in comments
qapi/audio.json | 1 -
qapi/block-core.json | 97 ++++++++++++++++++----------------------
qapi/block-export.json | 2 +-
qapi/block.json | 13 +++---
qapi/char.json | 10 ++---
qapi/common.json | 2 -
qapi/control.json | 13 +++---
qapi/crypto.json | 62 ++++++++++++-------------
qapi/dump.json | 4 +-
qapi/job.json | 1 -
qapi/machine-target.json | 1 -
qapi/machine.json | 12 +++--
qapi/migration.json | 19 ++++----
qapi/misc-target.json | 13 ++----
qapi/misc.json | 6 +--
qapi/replay.json | 1 -
qapi/run-state.json | 10 ++---
qapi/sockets.json | 6 +--
qapi/ui.json | 70 ++++++++++-------------------
19 files changed, 136 insertions(+), 207 deletions(-)
--
2.35.1
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 1/8] qapi: Drop stray trailing symbol
2022-05-03 7:37 [PATCH v2 0/8] qapi: Primarily whitespace tweaks Andrea Bolognani
@ 2022-05-03 7:37 ` Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 2/8] qapi: Fix comment indentation Andrea Bolognani
` (7 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Andrea Bolognani @ 2022-05-03 7:37 UTC (permalink / raw)
To: qemu-devel
Cc: Juan Quintela, Paolo Bonzini, Vladimir Sementsov-Ogievskiy,
Eric Blake, Dr. David Alan Gilbert, Marcel Apfelbaum, qemu-block,
Philippe Mathieu-Daudé, Eduardo Habkost,
Daniel P. Berrangé, Pavel Dovgalyuk, Markus Armbruster,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
---
qapi/run-state.json | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/qapi/run-state.json b/qapi/run-state.json
index 8124220bd9..15d6c9a2ed 100644
--- a/qapi/run-state.json
+++ b/qapi/run-state.json
@@ -348,7 +348,7 @@
#
# @poweroff: Shutdown the VM and exit
#
-# @pause: pause the VM#
+# @pause: pause the VM
#
# Since: 6.0
##
--
2.35.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 2/8] qapi: Fix comment indentation
2022-05-03 7:37 [PATCH v2 0/8] qapi: Primarily whitespace tweaks Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 1/8] qapi: Drop stray trailing symbol Andrea Bolognani
@ 2022-05-03 7:37 ` Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 3/8] qapi: Add missing separators between sections Andrea Bolognani
` (6 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Andrea Bolognani @ 2022-05-03 7:37 UTC (permalink / raw)
To: qemu-devel
Cc: Juan Quintela, Paolo Bonzini, Vladimir Sementsov-Ogievskiy,
Eric Blake, Dr. David Alan Gilbert, Marcel Apfelbaum, qemu-block,
Philippe Mathieu-Daudé, Eduardo Habkost,
Daniel P. Berrangé, Pavel Dovgalyuk, Markus Armbruster,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
It should start on the very first column.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
---
qapi/ui.json | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/qapi/ui.json b/qapi/ui.json
index 059302a5ef..43e62efd76 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -1250,21 +1250,21 @@
'*p2p': 'bool',
'*audiodev': 'str' } }
- ##
- # @DisplayGLMode:
- #
- # Display OpenGL mode.
- #
- # @off: Disable OpenGL (default).
- # @on: Use OpenGL, pick context type automatically.
- # Would better be named 'auto' but is called 'on' for backward
- # compatibility with bool type.
- # @core: Use OpenGL with Core (desktop) Context.
- # @es: Use OpenGL with ES (embedded systems) Context.
- #
- # Since: 3.0
- #
- ##
+##
+# @DisplayGLMode:
+#
+# Display OpenGL mode.
+#
+# @off: Disable OpenGL (default).
+# @on: Use OpenGL, pick context type automatically.
+# Would better be named 'auto' but is called 'on' for backward
+# compatibility with bool type.
+# @core: Use OpenGL with Core (desktop) Context.
+# @es: Use OpenGL with ES (embedded systems) Context.
+#
+# Since: 3.0
+#
+##
{ 'enum' : 'DisplayGLMode',
'data' : [ 'off', 'on', 'core', 'es' ] }
--
2.35.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 3/8] qapi: Add missing separators between sections
2022-05-03 7:37 [PATCH v2 0/8] qapi: Primarily whitespace tweaks Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 1/8] qapi: Drop stray trailing symbol Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 2/8] qapi: Fix comment indentation Andrea Bolognani
@ 2022-05-03 7:37 ` Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 4/8] qapi: Drop unnecessary empty lines in comments Andrea Bolognani
` (5 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Andrea Bolognani @ 2022-05-03 7:37 UTC (permalink / raw)
To: qemu-devel
Cc: Juan Quintela, Paolo Bonzini, Vladimir Sementsov-Ogievskiy,
Eric Blake, Dr. David Alan Gilbert, Marcel Apfelbaum, qemu-block,
Philippe Mathieu-Daudé, Eduardo Habkost,
Daniel P. Berrangé, Pavel Dovgalyuk, Markus Armbruster,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
This only affects readability. The generated documentation
doesn't change.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
---
qapi/block-core.json | 5 +++++
qapi/block.json | 1 +
qapi/crypto.json | 7 +++++++
qapi/machine.json | 1 +
qapi/migration.json | 4 ++++
5 files changed, 18 insertions(+)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index b66494e8c5..34dae298ee 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1744,6 +1744,7 @@
# Since: 2.3
#
# Example:
+#
# -> { "execute": "blockdev-backup",
# "arguments": { "device": "src-id",
# "sync": "full",
@@ -2008,6 +2009,7 @@
# @on-target-error: the action to take on an error on the target,
# default 'report' (no limitations, since this applies to
# a different block device than @device).
+#
# @unmap: Whether to try to unmap target sectors where source has
# only zero. If true, and target unallocated sectors will read as zero,
# target image sectors will be unmapped; otherwise, zeroes will be
@@ -2029,6 +2031,7 @@
# When true, this job will automatically disappear from the query
# list without user intervention.
# Defaults to true. (Since 3.1)
+#
# Since: 1.3
##
{ 'struct': 'DriveMirror',
@@ -2342,6 +2345,7 @@
# When true, this job will automatically disappear from the query
# list without user intervention.
# Defaults to true. (Since 3.1)
+#
# Returns: nothing on success.
#
# Since: 2.6
@@ -4139,6 +4143,7 @@
# @throttle-group: the name of the throttle-group object to use. It
# must already exist.
# @file: reference to or definition of the data source block device
+#
# Since: 2.11
##
{ 'struct': 'BlockdevOptionsThrottle',
diff --git a/qapi/block.json b/qapi/block.json
index 3f100d4887..e0f7898ed1 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -105,6 +105,7 @@
#
# Returns: - Nothing on success
# - If @device is not a valid block device, DeviceNotFound
+#
# Notes: Ejecting a device with no media results in success
#
# Since: 0.14
diff --git a/qapi/crypto.json b/qapi/crypto.json
index 1ec54c15ca..829e70a168 100644
--- a/qapi/crypto.json
+++ b/qapi/crypto.json
@@ -32,6 +32,7 @@
#
# @raw: raw bytes. When encoded in JSON only valid UTF-8 sequences can be used
# @base64: arbitrary base64 encoded binary data
+#
# Since: 2.6
##
{ 'enum': 'QCryptoSecretFormat',
@@ -51,6 +52,7 @@
# @sha384: SHA-384. (since 2.7)
# @sha512: SHA-512. (since 2.7)
# @ripemd160: RIPEMD-160. (since 2.7)
+#
# Since: 2.6
##
{ 'enum': 'QCryptoHashAlgorithm',
@@ -75,6 +77,7 @@
# @twofish-128: Twofish with 128 bit / 16 byte keys
# @twofish-192: Twofish with 192 bit / 24 byte keys
# @twofish-256: Twofish with 256 bit / 32 byte keys
+#
# Since: 2.6
##
{ 'enum': 'QCryptoCipherAlgorithm',
@@ -95,6 +98,7 @@
# @cbc: Cipher Block Chaining
# @xts: XEX with tweaked code book and ciphertext stealing
# @ctr: Counter (Since 2.8)
+#
# Since: 2.6
##
{ 'enum': 'QCryptoCipherMode',
@@ -114,6 +118,7 @@
# @plain: 64-bit sector number truncated to 32-bits
# @plain64: 64-bit sector number
# @essiv: 64-bit sector number encrypted with a hash of the encryption key
+#
# Since: 2.6
##
{ 'enum': 'QCryptoIVGenAlgorithm',
@@ -170,6 +175,7 @@
# @key-secret: the ID of a QCryptoSecret object providing the
# decryption key. Mandatory except when probing image for
# metadata only.
+#
# Since: 2.6
##
{ 'struct': 'QCryptoBlockOptionsLUKS',
@@ -194,6 +200,7 @@
# @iter-time: number of milliseconds to spend in
# PBKDF passphrase processing. Currently defaults
# to 2000. (since 2.8)
+#
# Since: 2.6
##
{ 'struct': 'QCryptoBlockCreateOptionsLUKS',
diff --git a/qapi/machine.json b/qapi/machine.json
index d25a481ce4..9ec17b3992 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -299,6 +299,7 @@
# returning does not indicate that a guest has accepted the request or
# that it has shut down. Many guests will respond to this command by
# prompting the user in some way.
+#
# Example:
#
# -> { "execute": "system_powerdown" }
diff --git a/qapi/migration.json b/qapi/migration.json
index 409eb086a2..fc1c157d3f 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -1422,7 +1422,9 @@
# @state: The state the migration is currently expected to be in
#
# Returns: nothing on success
+#
# Since: 2.11
+#
# Example:
#
# -> { "execute": "migrate-continue" , "arguments":
@@ -1736,6 +1738,7 @@
# Since: 4.2
#
# Example:
+#
# <- { "event": "UNPLUG_PRIMARY",
# "data": { "device-id": "hostdev0" },
# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
@@ -1845,6 +1848,7 @@
# Since: 5.2
#
# Example:
+#
# {"execute": "calc-dirty-rate", "arguments": {"calc-time": 1,
# 'sample-pages': 512} }
#
--
2.35.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 4/8] qapi: Drop unnecessary empty lines in comments
2022-05-03 7:37 [PATCH v2 0/8] qapi: Primarily whitespace tweaks Andrea Bolognani
` (2 preceding siblings ...)
2022-05-03 7:37 ` [PATCH v2 3/8] qapi: Add missing separators between sections Andrea Bolognani
@ 2022-05-03 7:37 ` Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 5/8] qapi: Drop unnecessary empty lines outside of comments Andrea Bolognani
` (4 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Andrea Bolognani @ 2022-05-03 7:37 UTC (permalink / raw)
To: qemu-devel
Cc: Juan Quintela, Paolo Bonzini, Vladimir Sementsov-Ogievskiy,
Eric Blake, Dr. David Alan Gilbert, Marcel Apfelbaum, qemu-block,
Philippe Mathieu-Daudé, Eduardo Habkost,
Daniel P. Berrangé, Pavel Dovgalyuk, Markus Armbruster,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
---
qapi/block-core.json | 4 ----
qapi/block.json | 1 -
qapi/char.json | 1 -
qapi/common.json | 2 --
qapi/control.json | 2 --
qapi/crypto.json | 1 -
qapi/machine.json | 2 --
qapi/migration.json | 7 -------
qapi/misc-target.json | 3 ---
qapi/replay.json | 1 -
qapi/run-state.json | 3 ---
qapi/ui.json | 22 ----------------------
12 files changed, 49 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 34dae298ee..27832a1244 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -237,7 +237,6 @@
# information (since 1.7)
#
# Since: 1.3
-#
##
{ 'struct': 'ImageInfo',
'data': {'filename': 'str', 'format': 'str', '*dirty-flag': 'bool',
@@ -288,7 +287,6 @@
# supports it
#
# Since: 1.4
-#
##
{ 'struct': 'ImageCheck',
'data': {'filename': 'str', 'format': 'str', 'check-errors': 'int',
@@ -328,7 +326,6 @@
# @filename: filename that is referred to by @offset
#
# Since: 2.6
-#
##
{ 'struct': 'MapEntry',
'data': {'start': 'int', 'length': 'int', 'data': 'bool',
@@ -445,7 +442,6 @@
# has one or more dirty bitmaps) (Since 4.2)
#
# Since: 0.14
-#
##
{ 'struct': 'BlockDeviceInfo',
'data': { 'file': 'str', '*node-name': 'str', 'ro': 'bool', 'drv': 'str',
diff --git a/qapi/block.json b/qapi/block.json
index e0f7898ed1..5de15c6070 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -300,7 +300,6 @@
# @read-write: Makes the device writable
#
# Since: 2.3
-#
##
{ 'enum': 'BlockdevChangeReadOnlyMode',
'data': ['retain', 'read-only', 'read-write'] }
diff --git a/qapi/char.json b/qapi/char.json
index 7b42151575..f0fd0d1c9f 100644
--- a/qapi/char.json
+++ b/qapi/char.json
@@ -413,7 +413,6 @@
# @clipboard: enable/disable clipboard, default is disabled.
#
# Since: 6.1
-#
##
{ 'struct': 'ChardevQemuVDAgent',
'data': { '*mouse': 'bool',
diff --git a/qapi/common.json b/qapi/common.json
index 412cc4f5ae..356db3f670 100644
--- a/qapi/common.json
+++ b/qapi/common.json
@@ -192,7 +192,6 @@
# Keys to toggle input-linux between host and guest.
#
# Since: 4.0
-#
##
{ 'enum': 'GrabToggleKeys',
'data': [ 'ctrl-ctrl', 'alt-alt', 'shift-shift','meta-meta', 'scrolllock',
@@ -204,7 +203,6 @@
# @human-readable-text: Formatted output intended for humans.
#
# Since: 6.2
-#
##
{ 'struct': 'HumanReadableText',
'data': { 'human-readable-text': 'str' } }
diff --git a/qapi/control.json b/qapi/control.json
index 71a838d49e..8c9122ef7a 100644
--- a/qapi/control.json
+++ b/qapi/control.json
@@ -33,7 +33,6 @@
# all the QMP capabilities will be turned off by default.
#
# Since: 0.13
-#
##
{ 'command': 'qmp_capabilities',
'data': { '*enable': [ 'QMPCapability' ] },
@@ -49,7 +48,6 @@
# (Please refer to qmp-spec.txt for more information on OOB)
#
# Since: 2.12
-#
##
{ 'enum': 'QMPCapability',
'data': [ 'oob' ] }
diff --git a/qapi/crypto.json b/qapi/crypto.json
index 829e70a168..aebe390ab7 100644
--- a/qapi/crypto.json
+++ b/qapi/crypto.json
@@ -364,7 +364,6 @@
# password to use to retrieve current master key.
# Defaults to the same secret that was used to open the image
#
-#
# Since 5.1
##
{ 'struct': 'QCryptoBlockAmendOptionsLUKS',
diff --git a/qapi/machine.json b/qapi/machine.json
index 9ec17b3992..20b1f0c748 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -77,7 +77,6 @@
# additional fields will be listed (since 3.0)
#
# Since: 2.12
-#
##
{ 'union' : 'CpuInfoFast',
'base' : { 'cpu-index' : 'int',
@@ -1020,7 +1019,6 @@
# Formula used: logical_vm_size = vm_ram_size - balloon_size
#
# Since: 0.14
-#
##
{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
diff --git a/qapi/migration.json b/qapi/migration.json
index fc1c157d3f..dd4dde6361 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -151,7 +151,6 @@
# (since 4.2)
#
# Since: 2.3
-#
##
{ 'enum': 'MigrationStatus',
'data': [ 'none', 'setup', 'cancelling', 'cancelled',
@@ -166,7 +165,6 @@
# @transferred: amount of bytes transferred to the target VM by VFIO devices
#
# Since: 5.2
-#
##
{ 'struct': 'VfioStats',
'data': {'transferred': 'int' } }
@@ -546,7 +544,6 @@
# @zstd: use zstd compression method.
#
# Since: 5.0
-#
##
{ 'enum': 'MultiFDCompression',
'data': [ 'none', 'zlib',
@@ -1757,7 +1754,6 @@
# @dirty-rate: dirty rate.
#
# Since: 6.2
-#
##
{ 'struct': 'DirtyRateVcpu',
'data': { 'id': 'int', 'dirty-rate': 'int64' } }
@@ -1774,7 +1770,6 @@
# @measured: the dirtyrate thread has measured and results are available.
#
# Since: 5.2
-#
##
{ 'enum': 'DirtyRateStatus',
'data': [ 'unstarted', 'measuring', 'measured'] }
@@ -1791,7 +1786,6 @@
# @dirty-bitmap: calculate dirtyrate by dirty bitmap.
#
# Since: 6.2
-#
##
{ 'enum': 'DirtyRateMeasureMode',
'data': ['page-sampling', 'dirty-ring', 'dirty-bitmap'] }
@@ -1821,7 +1815,6 @@
# mode specified (Since 6.2)
#
# Since: 5.2
-#
##
{ 'struct': 'DirtyRateInfo',
'data': {'*dirty-rate': 'int64',
diff --git a/qapi/misc-target.json b/qapi/misc-target.json
index ed4a468aab..ae2c483a68 100644
--- a/qapi/misc-target.json
+++ b/qapi/misc-target.json
@@ -110,7 +110,6 @@
# @data: the measurement value encoded in base64
#
# Since: 2.12
-#
##
{ 'struct': 'SevLaunchMeasureInfo', 'data': {'data': 'str'},
'if': 'TARGET_I386' }
@@ -194,7 +193,6 @@
# @gpa: the guest physical address where secret will be injected.
#
# Since: 6.0
-#
##
{ 'command': 'sev-inject-launch-secret',
'data': { 'packet-header': 'str', 'secret': 'str', '*gpa': 'uint64' },
@@ -208,7 +206,6 @@
#
# @data: guest attestation report (base64 encoded)
#
-#
# Since: 6.1
##
{ 'struct': 'SevAttestationReport',
diff --git a/qapi/replay.json b/qapi/replay.json
index 351898f60d..729470300d 100644
--- a/qapi/replay.json
+++ b/qapi/replay.json
@@ -40,7 +40,6 @@
# @icount: current number of executed instructions.
#
# Since: 5.2
-#
##
{ 'struct': 'ReplayInfo',
'data': { 'mode': 'ReplayMode', '*filename': 'str', 'icount': 'int' } }
diff --git a/qapi/run-state.json b/qapi/run-state.json
index 15d6c9a2ed..a5d2db3b91 100644
--- a/qapi/run-state.json
+++ b/qapi/run-state.json
@@ -592,7 +592,6 @@
# @guest: memory failure at guest memory,
#
# Since: 5.2
-#
##
{ 'enum': 'MemoryFailureRecipient',
'data': [ 'hypervisor',
@@ -619,7 +618,6 @@
# to handle memory failures.
#
# Since: 5.2
-#
##
{ 'enum': 'MemoryFailureAction',
'data': [ 'ignore',
@@ -639,7 +637,6 @@
# failure was still in progress.
#
# Since: 5.2
-#
##
{ 'struct': 'MemoryFailureFlags',
'data': { 'action-required': 'bool',
diff --git a/qapi/ui.json b/qapi/ui.json
index 43e62efd76..0e903340fc 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -15,7 +15,6 @@
# Display protocols which support changing password options.
#
# Since: 7.0
-#
##
{ 'enum': 'DisplayProtocol',
'data': [ 'vnc', 'spice' ] }
@@ -32,7 +31,6 @@
# @disconnect: disconnect existing clients
#
# Since: 7.0
-#
##
{ 'enum': 'SetPasswordAction',
'data': [ 'keep', 'fail', 'disconnect' ] }
@@ -52,7 +50,6 @@
# For VNC, only 'keep' is currently implemented.
#
# Since: 7.0
-#
##
{ 'union': 'SetPasswordOptions',
'base': { 'protocol': 'DisplayProtocol',
@@ -70,7 +67,6 @@
# Defaults to the first.
#
# Since: 7.0
-#
##
{ 'struct': 'SetPasswordOptionsVnc',
'data': { '*display': 'str' } }
@@ -115,7 +111,6 @@
# sure you are on the same machine as the QEMU instance.
#
# Since: 7.0
-#
##
{ 'union': 'ExpirePasswordOptions',
'base': { 'protocol': 'DisplayProtocol',
@@ -132,7 +127,6 @@
# Defaults to the first.
#
# Since: 7.0
-#
##
{ 'struct': 'ExpirePasswordOptionsVnc',
@@ -167,7 +161,6 @@
# @ppm: PPM format
#
# Since: 7.1
-#
##
{ 'enum': 'ImageFormat',
'data': ['ppm', 'png'] }
@@ -902,7 +895,6 @@
# are effectively synonyms.
#
# Since: 1.3
-#
##
{ 'enum': 'QKeyCode',
'data': [ 'unmapped',
@@ -1206,7 +1198,6 @@
# Since 3.1
#
# Since: 2.12
-#
##
{ 'struct' : 'DisplayGTK',
'data' : { '*grab-on-hover' : 'bool',
@@ -1221,7 +1212,6 @@
# available node on the host.
#
# Since: 3.1
-#
##
{ 'struct' : 'DisplayEGLHeadless',
'data' : { '*rendernode' : 'str' } }
@@ -1242,7 +1232,6 @@
# @audiodev: Use the specified DBus audiodev to export audio.
#
# Since: 7.0
-#
##
{ 'struct' : 'DisplayDBus',
'data' : { '*rendernode' : 'str',
@@ -1263,7 +1252,6 @@
# @es: Use OpenGL with ES (embedded systems) Context.
#
# Since: 3.0
-#
##
{ 'enum' : 'DisplayGLMode',
'data' : [ 'off', 'on', 'core', 'es' ] }
@@ -1276,7 +1264,6 @@
# @charset: Font charset used by guest (default: CP437).
#
# Since: 4.0
-#
##
{ 'struct' : 'DisplayCurses',
'data' : { '*charset' : 'str' } }
@@ -1346,7 +1333,6 @@
# @dbus: Start a D-Bus service for the display. (Since 7.0)
#
# Since: 2.12
-#
##
{ 'enum' : 'DisplayType',
'data' : [
@@ -1376,7 +1362,6 @@
# @gl: Enable OpenGL support (default: off).
#
# Since: 2.12
-#
##
{ 'union' : 'DisplayOptions',
'base' : { 'type' : 'DisplayType',
@@ -1403,7 +1388,6 @@
# Returns: @DisplayOptions
#
# Since: 3.1
-#
##
{ 'command': 'query-display-options',
'returns': 'DisplayOptions' }
@@ -1416,7 +1400,6 @@
# @vnc: VNC display
#
# Since: 6.0
-#
##
{ 'enum': 'DisplayReloadType',
'data': ['vnc'] }
@@ -1429,7 +1412,6 @@
# @tls-certs: reload tls certs or not.
#
# Since: 6.0
-#
##
{ 'struct': 'DisplayReloadOptionsVNC',
'data': { '*tls-certs': 'bool' } }
@@ -1442,7 +1424,6 @@
# @type: Specify the display type.
#
# Since: 6.0
-#
##
{ 'union': 'DisplayReloadOptions',
'base': {'type': 'DisplayReloadType'},
@@ -1477,7 +1458,6 @@
# @vnc: VNC display
#
# Since: 7.1
-#
##
{ 'enum': 'DisplayUpdateType',
'data': ['vnc'] }
@@ -1492,7 +1472,6 @@
# for websockets are not touched.
#
# Since: 7.1
-#
##
{ 'struct': 'DisplayUpdateOptionsVNC',
'data': { '*addresses': ['SocketAddress'] } }
@@ -1505,7 +1484,6 @@
# @type: Specify the display type.
#
# Since: 7.1
-#
##
{ 'union': 'DisplayUpdateOptions',
'base': {'type': 'DisplayUpdateType'},
--
2.35.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 5/8] qapi: Drop unnecessary empty lines outside of comments
2022-05-03 7:37 [PATCH v2 0/8] qapi: Primarily whitespace tweaks Andrea Bolognani
` (3 preceding siblings ...)
2022-05-03 7:37 ` [PATCH v2 4/8] qapi: Drop unnecessary empty lines in comments Andrea Bolognani
@ 2022-05-03 7:37 ` Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 6/8] qapi: Drop unnecessary whitespace in comments Andrea Bolognani
` (3 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Andrea Bolognani @ 2022-05-03 7:37 UTC (permalink / raw)
To: qemu-devel
Cc: Juan Quintela, Paolo Bonzini, Vladimir Sementsov-Ogievskiy,
Eric Blake, Dr. David Alan Gilbert, Marcel Apfelbaum, qemu-block,
Philippe Mathieu-Daudé, Eduardo Habkost,
Daniel P. Berrangé, Pavel Dovgalyuk, Markus Armbruster,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
---
qapi/audio.json | 1 -
qapi/block-core.json | 11 -----------
qapi/block.json | 3 ---
qapi/char.json | 1 -
qapi/control.json | 1 -
qapi/crypto.json | 12 ------------
qapi/job.json | 1 -
qapi/machine-target.json | 1 -
qapi/machine.json | 1 -
qapi/misc-target.json | 4 ----
qapi/run-state.json | 1 -
qapi/ui.json | 1 -
12 files changed, 38 deletions(-)
diff --git a/qapi/audio.json b/qapi/audio.json
index 0785e70a50..8099e3d7f1 100644
--- a/qapi/audio.json
+++ b/qapi/audio.json
@@ -352,7 +352,6 @@
'*out': 'AudiodevPerDirectionOptions',
'*path': 'str' } }
-
##
# @AudioFormat:
#
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 27832a1244..2bce5bb0ae 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -739,7 +739,6 @@
##
{ 'command': 'query-block', 'returns': ['BlockInfo'] }
-
##
# @BlockDeviceTimedStats:
#
@@ -1512,7 +1511,6 @@
{ 'command': 'blockdev-snapshot-sync',
'data': 'BlockdevSnapshotSync' }
-
##
# @blockdev-snapshot:
#
@@ -1751,7 +1749,6 @@
{ 'command': 'blockdev-backup', 'boxed': true,
'data': 'BlockdevBackup' }
-
##
# @query-named-block-nodes:
#
@@ -3067,7 +3064,6 @@
'base': 'BlockdevOptionsGenericFormat',
'data': { '*key-secret': 'str' } }
-
##
# @BlockdevOptionsGenericCOWFormat:
#
@@ -3182,8 +3178,6 @@
'base': 'BlockdevOptionsGenericCOWFormat',
'data': { '*encrypt': 'BlockdevQcowEncryption' } }
-
-
##
# @BlockdevQcow2EncryptionFormat:
#
@@ -3357,7 +3351,6 @@
'*user': 'str',
'*host-key-check': 'SshHostKeyCheck' } }
-
##
# @BlkdebugEvent:
#
@@ -3721,7 +3714,6 @@
'*header-digest': 'IscsiHeaderDigest',
'*timeout': 'int' } }
-
##
# @RbdAuthMode:
#
@@ -4564,7 +4556,6 @@
{ 'enum': 'BlockdevQcow2Version',
'data': [ 'v2', 'v3' ] }
-
##
# @Qcow2CompressionType:
#
@@ -4738,7 +4729,6 @@
'*toolsversion': 'str',
'*zeroed-grain': 'bool' } }
-
##
# @BlockdevCreateOptionsSsh:
#
@@ -4973,7 +4963,6 @@
{ 'enum': 'BlockErrorAction',
'data': [ 'ignore', 'report', 'stop' ] }
-
##
# @BLOCK_IMAGE_CORRUPTED:
#
diff --git a/qapi/block.json b/qapi/block.json
index 5de15c6070..41b73c9934 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -286,7 +286,6 @@
'data': { 'id': 'str',
'node-name': 'str'} }
-
##
# @BlockdevChangeReadOnlyMode:
#
@@ -304,7 +303,6 @@
{ 'enum': 'BlockdevChangeReadOnlyMode',
'data': ['retain', 'read-only', 'read-write'] }
-
##
# @blockdev-change-medium:
#
@@ -375,7 +373,6 @@
'*force': 'bool',
'*read-only-mode': 'BlockdevChangeReadOnlyMode' } }
-
##
# @DEVICE_TRAY_MOVED:
#
diff --git a/qapi/char.json b/qapi/char.json
index f0fd0d1c9f..8414ef2bc2 100644
--- a/qapi/char.json
+++ b/qapi/char.json
@@ -329,7 +329,6 @@
'data': { '*signal': 'bool' },
'base': 'ChardevCommon' }
-
##
# @ChardevSpiceChannel:
#
diff --git a/qapi/control.json b/qapi/control.json
index 8c9122ef7a..53461cec05 100644
--- a/qapi/control.json
+++ b/qapi/control.json
@@ -68,7 +68,6 @@
{ 'struct': 'VersionTriple',
'data': {'major': 'int', 'minor': 'int', 'micro': 'int'} }
-
##
# @VersionInfo:
#
diff --git a/qapi/crypto.json b/qapi/crypto.json
index aebe390ab7..ff33e1fe1f 100644
--- a/qapi/crypto.json
+++ b/qapi/crypto.json
@@ -24,7 +24,6 @@
'prefix': 'QCRYPTO_TLS_CREDS_ENDPOINT',
'data': ['client', 'server']}
-
##
# @QCryptoSecretFormat:
#
@@ -39,7 +38,6 @@
'prefix': 'QCRYPTO_SECRET_FORMAT',
'data': ['raw', 'base64']}
-
##
# @QCryptoHashAlgorithm:
#
@@ -59,7 +57,6 @@
'prefix': 'QCRYPTO_HASH_ALG',
'data': ['md5', 'sha1', 'sha224', 'sha256', 'sha384', 'sha512', 'ripemd160']}
-
##
# @QCryptoCipherAlgorithm:
#
@@ -88,7 +85,6 @@
'serpent-128', 'serpent-192', 'serpent-256',
'twofish-128', 'twofish-192', 'twofish-256']}
-
##
# @QCryptoCipherMode:
#
@@ -105,7 +101,6 @@
'prefix': 'QCRYPTO_CIPHER_MODE',
'data': ['ecb', 'cbc', 'xts', 'ctr']}
-
##
# @QCryptoIVGenAlgorithm:
#
@@ -181,7 +176,6 @@
{ 'struct': 'QCryptoBlockOptionsLUKS',
'data': { '*key-secret': 'str' }}
-
##
# @QCryptoBlockCreateOptionsLUKS:
#
@@ -212,7 +206,6 @@
'*hash-alg': 'QCryptoHashAlgorithm',
'*iter-time': 'int'}}
-
##
# @QCryptoBlockOpenOptions:
#
@@ -227,7 +220,6 @@
'data': { 'qcow': 'QCryptoBlockOptionsQCow',
'luks': 'QCryptoBlockOptionsLUKS' } }
-
##
# @QCryptoBlockCreateOptions:
#
@@ -242,7 +234,6 @@
'data': { 'qcow': 'QCryptoBlockOptionsQCow',
'luks': 'QCryptoBlockCreateOptionsLUKS' } }
-
##
# @QCryptoBlockInfoBase:
#
@@ -256,7 +247,6 @@
{ 'struct': 'QCryptoBlockInfoBase',
'data': { 'format': 'QCryptoBlockFormat' }}
-
##
# @QCryptoBlockInfoLUKSSlot:
#
@@ -276,7 +266,6 @@
'*stripes': 'int',
'key-offset': 'int' } }
-
##
# @QCryptoBlockInfoLUKS:
#
@@ -330,7 +319,6 @@
{ 'enum': 'QCryptoBlockLUKSKeyslotState',
'data': [ 'active', 'inactive' ] }
-
##
# @QCryptoBlockAmendOptionsLUKS:
#
diff --git a/qapi/job.json b/qapi/job.json
index 1a6ef03451..d5f84e9615 100644
--- a/qapi/job.json
+++ b/qapi/job.json
@@ -173,7 +173,6 @@
##
{ 'command': 'job-cancel', 'data': { 'id': 'str' } }
-
##
# @job-complete:
#
diff --git a/qapi/machine-target.json b/qapi/machine-target.json
index f5ec4bc172..06b0d2ca61 100644
--- a/qapi/machine-target.json
+++ b/qapi/machine-target.json
@@ -54,7 +54,6 @@
{ 'enum': 'CpuModelExpansionType',
'data': [ 'static', 'full' ] }
-
##
# @CpuModelCompareResult:
#
diff --git a/qapi/machine.json b/qapi/machine.json
index 20b1f0c748..9f91e46e8b 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -1363,7 +1363,6 @@
{ 'event': 'MEMORY_DEVICE_SIZE_CHANGE',
'data': { '*id': 'str', 'size': 'size', 'qom-path' : 'str'} }
-
##
# @MEM_UNPLUG_ERROR:
#
diff --git a/qapi/misc-target.json b/qapi/misc-target.json
index ae2c483a68..2fa68a6796 100644
--- a/qapi/misc-target.json
+++ b/qapi/misc-target.json
@@ -21,7 +21,6 @@
{ 'command': 'rtc-reset-reinjection',
'if': 'TARGET_I386' }
-
##
# @SevState:
#
@@ -101,7 +100,6 @@
{ 'command': 'query-sev', 'returns': 'SevInfo',
'if': 'TARGET_I386' }
-
##
# @SevLaunchMeasureInfo:
#
@@ -132,7 +130,6 @@
{ 'command': 'query-sev-launch-measure', 'returns': 'SevLaunchMeasureInfo',
'if': 'TARGET_I386' }
-
##
# @SevCapability:
#
@@ -304,7 +301,6 @@
{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'],
'if': 'TARGET_ARM' }
-
##
# @SGXEPCSection:
#
diff --git a/qapi/run-state.json b/qapi/run-state.json
index a5d2db3b91..30a2f5231d 100644
--- a/qapi/run-state.json
+++ b/qapi/run-state.json
@@ -597,7 +597,6 @@
'data': [ 'hypervisor',
'guest' ] }
-
##
# @MemoryFailureAction:
#
diff --git a/qapi/ui.json b/qapi/ui.json
index 0e903340fc..9f19beea6d 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -128,7 +128,6 @@
#
# Since: 7.0
##
-
{ 'struct': 'ExpirePasswordOptionsVnc',
'data': { '*display': 'str' } }
--
2.35.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 6/8] qapi: Drop unnecessary whitespace in comments
2022-05-03 7:37 [PATCH v2 0/8] qapi: Primarily whitespace tweaks Andrea Bolognani
` (4 preceding siblings ...)
2022-05-03 7:37 ` [PATCH v2 5/8] qapi: Drop unnecessary empty lines outside of comments Andrea Bolognani
@ 2022-05-03 7:37 ` Andrea Bolognani
2022-05-03 8:40 ` Markus Armbruster
2022-05-03 7:37 ` [PATCH v2 7/8] qapi: Reduce whitespace used for alignment " Andrea Bolognani
` (2 subsequent siblings)
8 siblings, 1 reply; 15+ messages in thread
From: Andrea Bolognani @ 2022-05-03 7:37 UTC (permalink / raw)
To: qemu-devel
Cc: Juan Quintela, Paolo Bonzini, Vladimir Sementsov-Ogievskiy,
Eric Blake, Dr. David Alan Gilbert, Marcel Apfelbaum, qemu-block,
Philippe Mathieu-Daudé, Eduardo Habkost,
Daniel P. Berrangé, Pavel Dovgalyuk, Markus Armbruster,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
The only instances that get changed are those in which the
additional whitespace was not (or couldn't possibly be) used for
alignment purposes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
---
qapi/block-core.json | 24 ++++++++++++------------
qapi/block-export.json | 2 +-
qapi/block.json | 2 +-
qapi/char.json | 2 +-
qapi/dump.json | 4 ++--
qapi/machine.json | 8 ++++----
qapi/misc-target.json | 6 +++---
qapi/misc.json | 6 +++---
qapi/run-state.json | 4 ++--
qapi/sockets.json | 2 +-
qapi/ui.json | 2 +-
11 files changed, 31 insertions(+), 31 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 2bce5bb0ae..e110af2f1d 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -604,7 +604,7 @@
# @inserted: @BlockDeviceInfo describing the device if media is
# present
#
-# Since: 0.14
+# Since: 0.14
##
{ 'struct': 'BlockInfo',
'data': {'device': 'str', '*qdev': 'str', 'type': 'str', 'removable': 'bool',
@@ -795,9 +795,9 @@
#
# Statistics of a virtual block device or a block backing device.
#
-# @rd_bytes: The number of bytes read by the device.
+# @rd_bytes: The number of bytes read by the device.
#
-# @wr_bytes: The number of bytes written by the device.
+# @wr_bytes: The number of bytes written by the device.
#
# @unmap_bytes: The number of bytes unmapped by the device (Since 4.2)
#
@@ -970,7 +970,7 @@
# @qdev: The qdev ID, or if no ID is assigned, the QOM path of the block
# device. (since 3.0)
#
-# @stats: A @BlockDeviceStats for the device.
+# @stats: A @BlockDeviceStats for the device.
#
# @driver-specific: Optional driver-specific stats. (Since 4.2)
#
@@ -1275,7 +1275,7 @@
#
# @node-name: graph node name to get the image resized (Since 2.0)
#
-# @size: new image size in bytes
+# @size: new image size in bytes
#
# Returns: - nothing on success
# - If @device is not a valid block device, DeviceNotFound
@@ -1960,8 +1960,8 @@
# @job-id: identifier for the newly-created block job. If
# omitted, the device name will be used. (Since 2.7)
#
-# @device: the device name or node-name of a root node whose writes should be
-# mirrored.
+# @device: the device name or node-name of a root node whose writes should be
+# mirrored.
#
# @target: the target of the new image. If the file exists, or if it
# is a device, the existing file/device will be used as the new
@@ -1981,7 +1981,7 @@
# @mode: whether and how QEMU should create a new image, default is
# 'absolute-paths'.
#
-# @speed: the maximum speed, in bytes per second
+# @speed: the maximum speed, in bytes per second
#
# @sync: what parts of the disk image should be copied to the destination
# (all the disk, only the sectors allocated in the topmost image, or
@@ -2296,7 +2296,7 @@
# broken Quorum files. By default, @device is replaced, although
# implicitly created filters on it are kept.
#
-# @speed: the maximum speed, in bytes per second
+# @speed: the maximum speed, in bytes per second
#
# @sync: what parts of the disk image should be copied to the destination
# (all the disk, only the sectors allocated in the topmost image, or
@@ -4548,8 +4548,8 @@
##
# @BlockdevQcow2Version:
#
-# @v2: The original QCOW2 format as introduced in qemu 0.10 (version 2)
-# @v3: The extended QCOW2 format as introduced in qemu 1.1 (version 3)
+# @v2: The original QCOW2 format as introduced in qemu 0.10 (version 2)
+# @v3: The extended QCOW2 format as introduced in qemu 1.1 (version 3)
#
# Since: 2.12
##
@@ -4905,7 +4905,7 @@
#
# Options for amending an image format
#
-# @driver: Block driver of the node to amend.
+# @driver: Block driver of the node to amend.
#
# Since: 5.1
##
diff --git a/qapi/block-export.json b/qapi/block-export.json
index 1de16d2589..53013b03ff 100644
--- a/qapi/block-export.json
+++ b/qapi/block-export.json
@@ -387,7 +387,7 @@
# block-export-del command, but before the shutdown has
# completed)
#
-# Since: 5.2
+# Since: 5.2
##
{ 'struct': 'BlockExportInfo',
'data': { 'id': 'str',
diff --git a/qapi/block.json b/qapi/block.json
index 41b73c9934..96f557b3bb 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -106,7 +106,7 @@
# Returns: - Nothing on success
# - If @device is not a valid block device, DeviceNotFound
#
-# Notes: Ejecting a device with no media results in success
+# Notes: Ejecting a device with no media results in success
#
# Since: 0.14
#
diff --git a/qapi/char.json b/qapi/char.json
index 8414ef2bc2..a40fe4b7bd 100644
--- a/qapi/char.json
+++ b/qapi/char.json
@@ -216,7 +216,7 @@
#
# Configuration info for file chardevs.
#
-# @in: The name of the input file
+# @in: The name of the input file
# @out: The name of the output file
# @append: Open the file in append mode (default false to
# truncate) (Since 2.6)
diff --git a/qapi/dump.json b/qapi/dump.json
index 29441af9d8..90859c5483 100644
--- a/qapi/dump.json
+++ b/qapi/dump.json
@@ -186,8 +186,8 @@
#
# Returns the available formats for dump-guest-memory
#
-# Returns: A @DumpGuestMemoryCapability object listing available formats for
-# dump-guest-memory
+# Returns: A @DumpGuestMemoryCapability object listing available formats for
+# dump-guest-memory
#
# Since: 2.0
#
diff --git a/qapi/machine.json b/qapi/machine.json
index 9f91e46e8b..6c120eb1bb 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -315,9 +315,9 @@
# query-current-machine), wake-up guest from suspend if the guest is
# in SUSPENDED state. Return an error otherwise.
#
-# Since: 1.1
+# Since: 1.1
#
-# Returns: nothing.
+# Returns: nothing.
#
# Note: prior to 4.0, this command does nothing in case the guest
# isn't suspended.
@@ -368,9 +368,9 @@
# Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs (ppc64).
# The command fails when the guest doesn't support injecting.
#
-# Returns: If successful, nothing
+# Returns: If successful, nothing
#
-# Since: 0.14
+# Since: 0.14
#
# Note: prior to 2.1, this command was only supported for x86 and s390 VMs
#
diff --git a/qapi/misc-target.json b/qapi/misc-target.json
index 2fa68a6796..4944c0528f 100644
--- a/qapi/misc-target.json
+++ b/qapi/misc-target.json
@@ -136,9 +136,9 @@
# The struct describes capability for a Secure Encrypted Virtualization
# feature.
#
-# @pdh: Platform Diffie-Hellman key (base64 encoded)
+# @pdh: Platform Diffie-Hellman key (base64 encoded)
#
-# @cert-chain: PDH certificate chain (base64 encoded)
+# @cert-chain: PDH certificate chain (base64 encoded)
#
# @cpu0-id: Unique ID of CPU0 (base64 encoded) (since 7.1)
#
@@ -201,7 +201,7 @@
# The struct describes attestation report for a Secure Encrypted
# Virtualization feature.
#
-# @data: guest attestation report (base64 encoded)
+# @data: guest attestation report (base64 encoded)
#
# Since: 6.1
##
diff --git a/qapi/misc.json b/qapi/misc.json
index b83cc39029..6aec6bdbf3 100644
--- a/qapi/misc.json
+++ b/qapi/misc.json
@@ -136,7 +136,7 @@
#
# Stop all guest VCPU execution.
#
-# Since: 0.14
+# Since: 0.14
#
# Notes: This function will succeed even if the guest is already in the stopped
# state. In "inmigrate" state, it will ensure that the guest
@@ -156,9 +156,9 @@
#
# Resume guest VCPU execution.
#
-# Since: 0.14
+# Since: 0.14
#
-# Returns: If successful, nothing
+# Returns: If successful, nothing
#
# Notes: This command will succeed if the guest is currently running. It
# will also succeed if the guest is in the "inmigrate" state; in
diff --git a/qapi/run-state.json b/qapi/run-state.json
index 30a2f5231d..6e2162d7b3 100644
--- a/qapi/run-state.json
+++ b/qapi/run-state.json
@@ -104,7 +104,7 @@
#
# @status: the virtual machine @RunState
#
-# Since: 0.14
+# Since: 0.14
#
# Notes: @singlestep is enabled through the GDB stub
##
@@ -118,7 +118,7 @@
#
# Returns: @StatusInfo reflecting all VCPUs
#
-# Since: 0.14
+# Since: 0.14
#
# Example:
#
diff --git a/qapi/sockets.json b/qapi/sockets.json
index fccc38584b..b4f84d3334 100644
--- a/qapi/sockets.json
+++ b/qapi/sockets.json
@@ -189,7 +189,7 @@
# Captures the address of a socket, which could also be a named file
# descriptor
#
-# @type: Transport type
+# @type: Transport type
#
# Since: 2.9
##
diff --git a/qapi/ui.json b/qapi/ui.json
index 9f19beea6d..c844237434 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -1260,7 +1260,7 @@
#
# Curses display options.
#
-# @charset: Font charset used by guest (default: CP437).
+# @charset: Font charset used by guest (default: CP437).
#
# Since: 4.0
##
--
2.35.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 7/8] qapi: Reduce whitespace used for alignment in comments
2022-05-03 7:37 [PATCH v2 0/8] qapi: Primarily whitespace tweaks Andrea Bolognani
` (5 preceding siblings ...)
2022-05-03 7:37 ` [PATCH v2 6/8] qapi: Drop unnecessary whitespace in comments Andrea Bolognani
@ 2022-05-03 7:37 ` Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 8/8] qapi: Stop using whitespace " Andrea Bolognani
2022-05-16 5:46 ` [PATCH v2 0/8] qapi: Primarily whitespace tweaks Markus Armbruster
8 siblings, 0 replies; 15+ messages in thread
From: Andrea Bolognani @ 2022-05-03 7:37 UTC (permalink / raw)
To: qemu-devel
Cc: Juan Quintela, Paolo Bonzini, Vladimir Sementsov-Ogievskiy,
Eric Blake, Dr. David Alan Gilbert, Marcel Apfelbaum, qemu-block,
Philippe Mathieu-Daudé, Eduardo Habkost,
Daniel P. Berrangé, Pavel Dovgalyuk, Markus Armbruster,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
Use the minimum number of spaces necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
---
qapi/block-core.json | 38 +++++++++++++++++++-------------------
qapi/control.json | 10 +++++-----
qapi/crypto.json | 42 +++++++++++++++++++++---------------------
qapi/ui.json | 16 ++++++++--------
4 files changed, 53 insertions(+), 53 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index e110af2f1d..5fd66ea676 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -337,9 +337,9 @@
#
# Cache mode information for a block device
#
-# @writeback: true if writeback mode is enabled
-# @direct: true if the host page cache is bypassed (O_DIRECT)
-# @no-flush: true if flush requests are ignored for the device
+# @writeback: true if writeback mode is enabled
+# @direct: true if the host page cache is bypassed (O_DIRECT)
+# @no-flush: true if flush requests are ignored for the device
#
# Since: 2.3
##
@@ -3333,15 +3333,15 @@
##
# @BlockdevOptionsSsh:
#
-# @server: host address
+# @server: host address
#
-# @path: path to the image on the host
+# @path: path to the image on the host
#
-# @user: user as which to connect, defaults to current
-# local user name
+# @user: user as which to connect, defaults to current
+# local user name
#
-# @host-key-check: Defines how and what to check the host key against
-# (default: known_hosts)
+# @host-key-check: Defines how and what to check the host key against
+# (default: known_hosts)
#
# Since: 2.9
##
@@ -4865,9 +4865,9 @@
# Starts a job to create an image format on a given node. The job is
# automatically finalized, but a manual job-dismiss is required.
#
-# @job-id: Identifier for the newly created job.
+# @job-id: Identifier for the newly created job.
#
-# @options: Options for the image creation.
+# @options: Options for the image creation.
#
# Since: 3.0
##
@@ -4923,17 +4923,17 @@
# Starts a job to amend format specific options of an existing open block device
# The job is automatically finalized, but a manual job-dismiss is required.
#
-# @job-id: Identifier for the newly created job.
+# @job-id: Identifier for the newly created job.
#
-# @node-name: Name of the block node to work on
+# @node-name: Name of the block node to work on
#
-# @options: Options (driver specific)
+# @options: Options (driver specific)
#
-# @force: Allow unsafe operations, format specific
-# For luks that allows erase of the last active keyslot
-# (permanent loss of data),
-# and replacement of an active keyslot
-# (possible loss of data if IO error happens)
+# @force: Allow unsafe operations, format specific
+# For luks that allows erase of the last active keyslot
+# (permanent loss of data),
+# and replacement of an active keyslot
+# (possible loss of data if IO error happens)
#
# Features:
# @unstable: This command is experimental.
diff --git a/qapi/control.json b/qapi/control.json
index 53461cec05..7107f55db3 100644
--- a/qapi/control.json
+++ b/qapi/control.json
@@ -192,14 +192,14 @@
#
# Options to be used for adding a new monitor.
#
-# @id: Name of the monitor
+# @id: Name of the monitor
#
-# @mode: Selects the monitor mode (default: readline in the system
-# emulator, control in qemu-storage-daemon)
+# @mode: Selects the monitor mode (default: readline in the system
+# emulator, control in qemu-storage-daemon)
#
-# @pretty: Enables pretty printing (QMP only)
+# @pretty: Enables pretty printing (QMP only)
#
-# @chardev: Name of a character device to expose the monitor on
+# @chardev: Name of a character device to expose the monitor on
#
# Since: 5.0
##
diff --git a/qapi/crypto.json b/qapi/crypto.json
index ff33e1fe1f..64e2ce81f1 100644
--- a/qapi/crypto.json
+++ b/qapi/crypto.json
@@ -311,8 +311,8 @@
#
# Defines state of keyslots that are affected by the update
#
-# @active: The slots contain the given password and marked as active
-# @inactive: The slots are erased (contain garbage) and marked as inactive
+# @active: The slots contain the given password and marked as active
+# @inactive: The slots are erased (contain garbage) and marked as inactive
#
# Since: 5.1
##
@@ -327,30 +327,30 @@
#
# @state: the desired state of the keyslots
#
-# @new-secret: The ID of a QCryptoSecret object providing the password to be
-# written into added active keyslots
+# @new-secret: The ID of a QCryptoSecret object providing the password to be
+# written into added active keyslots
#
-# @old-secret: Optional (for deactivation only)
-# If given will deactivate all keyslots that
-# match password located in QCryptoSecret with this ID
+# @old-secret: Optional (for deactivation only)
+# If given will deactivate all keyslots that
+# match password located in QCryptoSecret with this ID
#
-# @iter-time: Optional (for activation only)
-# Number of milliseconds to spend in
-# PBKDF passphrase processing for the newly activated keyslot.
-# Currently defaults to 2000.
+# @iter-time: Optional (for activation only)
+# Number of milliseconds to spend in
+# PBKDF passphrase processing for the newly activated keyslot.
+# Currently defaults to 2000.
#
-# @keyslot: Optional. ID of the keyslot to activate/deactivate.
-# For keyslot activation, keyslot should not be active already
-# (this is unsafe to update an active keyslot),
-# but possible if 'force' parameter is given.
-# If keyslot is not given, first free keyslot will be written.
+# @keyslot: Optional. ID of the keyslot to activate/deactivate.
+# For keyslot activation, keyslot should not be active already
+# (this is unsafe to update an active keyslot),
+# but possible if 'force' parameter is given.
+# If keyslot is not given, first free keyslot will be written.
#
-# For keyslot deactivation, this parameter specifies the exact
-# keyslot to deactivate
+# For keyslot deactivation, this parameter specifies the exact
+# keyslot to deactivate
#
-# @secret: Optional. The ID of a QCryptoSecret object providing the
-# password to use to retrieve current master key.
-# Defaults to the same secret that was used to open the image
+# @secret: Optional. The ID of a QCryptoSecret object providing the
+# password to use to retrieve current master key.
+# Defaults to the same secret that was used to open the image
#
# Since 5.1
##
diff --git a/qapi/ui.json b/qapi/ui.json
index c844237434..15c3f790a6 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -1018,8 +1018,8 @@
#
# Keyboard input event.
#
-# @key: Which key this event is for.
-# @down: True for key-down and false for key-up events.
+# @key: Which key this event is for.
+# @down: True for key-down and false for key-up events.
#
# Since: 2.0
##
@@ -1353,12 +1353,12 @@
#
# Display (user interface) options.
#
-# @type: Which DisplayType qemu should use.
-# @full-screen: Start user interface in fullscreen mode (default: off).
-# @window-close: Allow to quit qemu with window close button (default: on).
-# @show-cursor: Force showing the mouse cursor (default: off).
-# (since: 5.0)
-# @gl: Enable OpenGL support (default: off).
+# @type: Which DisplayType qemu should use.
+# @full-screen: Start user interface in fullscreen mode (default: off).
+# @window-close: Allow to quit qemu with window close button (default: on).
+# @show-cursor: Force showing the mouse cursor (default: off).
+# (since: 5.0)
+# @gl: Enable OpenGL support (default: off).
#
# Since: 2.12
##
--
2.35.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 8/8] qapi: Stop using whitespace for alignment in comments
2022-05-03 7:37 [PATCH v2 0/8] qapi: Primarily whitespace tweaks Andrea Bolognani
` (6 preceding siblings ...)
2022-05-03 7:37 ` [PATCH v2 7/8] qapi: Reduce whitespace used for alignment " Andrea Bolognani
@ 2022-05-03 7:37 ` Andrea Bolognani
2022-05-03 16:25 ` Eric Blake
2022-05-16 5:46 ` [PATCH v2 0/8] qapi: Primarily whitespace tweaks Markus Armbruster
8 siblings, 1 reply; 15+ messages in thread
From: Andrea Bolognani @ 2022-05-03 7:37 UTC (permalink / raw)
To: qemu-devel
Cc: Juan Quintela, Paolo Bonzini, Vladimir Sementsov-Ogievskiy,
Eric Blake, Dr. David Alan Gilbert, Marcel Apfelbaum, qemu-block,
Philippe Mathieu-Daudé, Eduardo Habkost,
Daniel P. Berrangé, Pavel Dovgalyuk, Markus Armbruster,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
Perfectly aligned things look pretty, but keeping them that
way as the schema evolves requires churn, and in some cases
newly-added lines are not aligned properly.
Overall, trying to align things is just not worth the trouble.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
---
qapi/block-core.json | 43 +++++++++++++++++++++----------------------
qapi/block.json | 6 +++---
qapi/char.json | 6 +++---
qapi/control.json | 6 +++---
qapi/crypto.json | 30 +++++++++++++++---------------
qapi/migration.json | 8 ++++----
qapi/sockets.json | 4 ++--
qapi/ui.json | 13 ++++++-------
8 files changed, 57 insertions(+), 59 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 5fd66ea676..f0383c7925 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -338,8 +338,8 @@
# Cache mode information for a block device
#
# @writeback: true if writeback mode is enabled
-# @direct: true if the host page cache is bypassed (O_DIRECT)
-# @no-flush: true if flush requests are ignored for the device
+# @direct: true if the host page cache is bypassed (O_DIRECT)
+# @no-flush: true if flush requests are ignored for the device
#
# Since: 2.3
##
@@ -3333,12 +3333,11 @@
##
# @BlockdevOptionsSsh:
#
-# @server: host address
+# @server: host address
#
-# @path: path to the image on the host
+# @path: path to the image on the host
#
-# @user: user as which to connect, defaults to current
-# local user name
+# @user: user as which to connect, defaults to current local user name
#
# @host-key-check: Defines how and what to check the host key against
# (default: known_hosts)
@@ -4662,18 +4661,18 @@
#
# Subformat options for VMDK images
#
-# @monolithicSparse: Single file image with sparse cluster allocation
+# @monolithicSparse: Single file image with sparse cluster allocation
#
-# @monolithicFlat: Single flat data image and a descriptor file
+# @monolithicFlat: Single flat data image and a descriptor file
#
# @twoGbMaxExtentSparse: Data is split into 2GB (per virtual LBA) sparse extent
# files, in addition to a descriptor file
#
-# @twoGbMaxExtentFlat: Data is split into 2GB (per virtual LBA) flat extent
-# files, in addition to a descriptor file
+# @twoGbMaxExtentFlat: Data is split into 2GB (per virtual LBA) flat extent
+# files, in addition to a descriptor file
#
-# @streamOptimized: Single file image sparse cluster allocation, optimized
-# for streaming over network.
+# @streamOptimized: Single file image sparse cluster allocation, optimized
+# for streaming over network.
#
# Since: 4.0
##
@@ -4764,7 +4763,7 @@
# @BlockdevVhdxSubformat:
#
# @dynamic: Growing image file
-# @fixed: Preallocated fixed-size image file
+# @fixed: Preallocated fixed-size image file
#
# Since: 2.12
##
@@ -4802,7 +4801,7 @@
# @BlockdevVpcSubformat:
#
# @dynamic: Growing image file
-# @fixed: Preallocated fixed-size image file
+# @fixed: Preallocated fixed-size image file
#
# Since: 2.12
##
@@ -4865,7 +4864,7 @@
# Starts a job to create an image format on a given node. The job is
# automatically finalized, but a manual job-dismiss is required.
#
-# @job-id: Identifier for the newly created job.
+# @job-id: Identifier for the newly created job.
#
# @options: Options for the image creation.
#
@@ -4923,17 +4922,17 @@
# Starts a job to amend format specific options of an existing open block device
# The job is automatically finalized, but a manual job-dismiss is required.
#
-# @job-id: Identifier for the newly created job.
+# @job-id: Identifier for the newly created job.
#
# @node-name: Name of the block node to work on
#
-# @options: Options (driver specific)
+# @options: Options (driver specific)
#
-# @force: Allow unsafe operations, format specific
-# For luks that allows erase of the last active keyslot
-# (permanent loss of data),
-# and replacement of an active keyslot
-# (possible loss of data if IO error happens)
+# @force: Allow unsafe operations, format specific
+# For luks that allows erase of the last active keyslot
+# (permanent loss of data),
+# and replacement of an active keyslot
+# (possible loss of data if IO error happens)
#
# Features:
# @unstable: This command is experimental.
diff --git a/qapi/block.json b/qapi/block.json
index 96f557b3bb..19326641ac 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -50,9 +50,9 @@
#
# Type of Floppy drive to be emulated by the Floppy Disk Controller.
#
-# @144: 1.44MB 3.5" drive
-# @288: 2.88MB 3.5" drive
-# @120: 1.2MB 5.25" drive
+# @144: 1.44MB 3.5" drive
+# @288: 2.88MB 3.5" drive
+# @120: 1.2MB 5.25" drive
# @none: No drive connected
# @auto: Automatically determined by inserted media at boot
#
diff --git a/qapi/char.json b/qapi/char.json
index a40fe4b7bd..923dc5056d 100644
--- a/qapi/char.json
+++ b/qapi/char.json
@@ -376,10 +376,10 @@
#
# Configuration info for virtual console chardevs.
#
-# @width: console width, in pixels
+# @width: console width, in pixels
# @height: console height, in pixels
-# @cols: console width, in chars
-# @rows: console height, in chars
+# @cols: console width, in chars
+# @rows: console height, in chars
#
# Since: 1.5
##
diff --git a/qapi/control.json b/qapi/control.json
index 7107f55db3..afca2043af 100644
--- a/qapi/control.json
+++ b/qapi/control.json
@@ -192,12 +192,12 @@
#
# Options to be used for adding a new monitor.
#
-# @id: Name of the monitor
+# @id: Name of the monitor
#
-# @mode: Selects the monitor mode (default: readline in the system
+# @mode: Selects the monitor mode (default: readline in the system
# emulator, control in qemu-storage-daemon)
#
-# @pretty: Enables pretty printing (QMP only)
+# @pretty: Enables pretty printing (QMP only)
#
# @chardev: Name of a character device to expose the monitor on
#
diff --git a/qapi/crypto.json b/qapi/crypto.json
index 64e2ce81f1..05386f6491 100644
--- a/qapi/crypto.json
+++ b/qapi/crypto.json
@@ -311,7 +311,7 @@
#
# Defines state of keyslots that are affected by the update
#
-# @active: The slots contain the given password and marked as active
+# @active: The slots contain the given password and marked as active
# @inactive: The slots are erased (contain garbage) and marked as inactive
#
# Since: 5.1
@@ -334,23 +334,23 @@
# If given will deactivate all keyslots that
# match password located in QCryptoSecret with this ID
#
-# @iter-time: Optional (for activation only)
-# Number of milliseconds to spend in
-# PBKDF passphrase processing for the newly activated keyslot.
-# Currently defaults to 2000.
+# @iter-time: Optional (for activation only)
+# Number of milliseconds to spend in
+# PBKDF passphrase processing for the newly activated keyslot.
+# Currently defaults to 2000.
#
-# @keyslot: Optional. ID of the keyslot to activate/deactivate.
-# For keyslot activation, keyslot should not be active already
-# (this is unsafe to update an active keyslot),
-# but possible if 'force' parameter is given.
-# If keyslot is not given, first free keyslot will be written.
+# @keyslot: Optional. ID of the keyslot to activate/deactivate.
+# For keyslot activation, keyslot should not be active already
+# (this is unsafe to update an active keyslot),
+# but possible if 'force' parameter is given.
+# If keyslot is not given, first free keyslot will be written.
#
-# For keyslot deactivation, this parameter specifies the exact
-# keyslot to deactivate
+# For keyslot deactivation, this parameter specifies the exact
+# keyslot to deactivate
#
-# @secret: Optional. The ID of a QCryptoSecret object providing the
-# password to use to retrieve current master key.
-# Defaults to the same secret that was used to open the image
+# @secret: Optional. The ID of a QCryptoSecret object providing the
+# password to use to retrieve current master key.
+# Defaults to the same secret that was used to open the image
#
# Since 5.1
##
diff --git a/qapi/migration.json b/qapi/migration.json
index dd4dde6361..1ff4d7eaff 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -1191,10 +1191,10 @@
# ask the client to automatically reconnect using the new parameters
# once migration finished successfully. Only implemented for SPICE.
#
-# @protocol: must be "spice"
-# @hostname: migration target hostname
-# @port: spice tcp port for plaintext channels
-# @tls-port: spice tcp port for tls-secured channels
+# @protocol: must be "spice"
+# @hostname: migration target hostname
+# @port: spice tcp port for plaintext channels
+# @tls-port: spice tcp port for tls-secured channels
# @cert-subject: server certificate subject
#
# Since: 0.14
diff --git a/qapi/sockets.json b/qapi/sockets.json
index b4f84d3334..bad74e34d3 100644
--- a/qapi/sockets.json
+++ b/qapi/sockets.json
@@ -167,9 +167,9 @@
#
# Available SocketAddress types
#
-# @inet: Internet address
+# @inet: Internet address
#
-# @unix: Unix domain socket
+# @unix: Unix domain socket
#
# @vsock: VMCI address
#
diff --git a/qapi/ui.json b/qapi/ui.json
index 15c3f790a6..11a827d10f 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -1018,7 +1018,7 @@
#
# Keyboard input event.
#
-# @key: Which key this event is for.
+# @key: Which key this event is for.
# @down: True for key-down and false for key-up events.
#
# Since: 2.0
@@ -1033,7 +1033,7 @@
# Pointer button input event.
#
# @button: Which button this event is for.
-# @down: True for key-down and false for key-up events.
+# @down: True for key-down and false for key-up events.
#
# Since: 2.0
##
@@ -1353,12 +1353,11 @@
#
# Display (user interface) options.
#
-# @type: Which DisplayType qemu should use.
-# @full-screen: Start user interface in fullscreen mode (default: off).
+# @type: Which DisplayType qemu should use.
+# @full-screen: Start user interface in fullscreen mode (default: off).
# @window-close: Allow to quit qemu with window close button (default: on).
-# @show-cursor: Force showing the mouse cursor (default: off).
-# (since: 5.0)
-# @gl: Enable OpenGL support (default: off).
+# @show-cursor: Force showing the mouse cursor (default: off). (since: 5.0)
+# @gl: Enable OpenGL support (default: off).
#
# Since: 2.12
##
--
2.35.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v2 6/8] qapi: Drop unnecessary whitespace in comments
2022-05-03 7:37 ` [PATCH v2 6/8] qapi: Drop unnecessary whitespace in comments Andrea Bolognani
@ 2022-05-03 8:40 ` Markus Armbruster
2022-05-03 16:23 ` Eric Blake
0 siblings, 1 reply; 15+ messages in thread
From: Markus Armbruster @ 2022-05-03 8:40 UTC (permalink / raw)
To: Andrea Bolognani
Cc: qemu-devel, Juan Quintela, Paolo Bonzini,
Vladimir Sementsov-Ogievskiy, Eric Blake, Dr. David Alan Gilbert,
Marcel Apfelbaum, qemu-block, Philippe Mathieu-Daudé,
Eduardo Habkost, Daniel P. Berrangé, Pavel Dovgalyuk,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
Andrea Bolognani <abologna@redhat.com> writes:
> The only instances that get changed are those in which the
> additional whitespace was not (or couldn't possibly be) used for
> alignment purposes.
>
> Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This mixes complete no-brainers with "I consider it an improvement, but
folks might disagree" (a few examples marked below for illustration).
Well, folks, if you disagree, speak up! I don't:
Reviewed-by: Markus Armbruster <armbru@redhat.com>
> ---
> qapi/block-core.json | 24 ++++++++++++------------
> qapi/block-export.json | 2 +-
> qapi/block.json | 2 +-
> qapi/char.json | 2 +-
> qapi/dump.json | 4 ++--
> qapi/machine.json | 8 ++++----
> qapi/misc-target.json | 6 +++---
> qapi/misc.json | 6 +++---
> qapi/run-state.json | 4 ++--
> qapi/sockets.json | 2 +-
> qapi/ui.json | 2 +-
> 11 files changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/qapi/block-core.json b/qapi/block-core.json
> index 2bce5bb0ae..e110af2f1d 100644
> --- a/qapi/block-core.json
> +++ b/qapi/block-core.json
> @@ -604,7 +604,7 @@
> # @inserted: @BlockDeviceInfo describing the device if media is
> # present
> #
> -# Since: 0.14
> +# Since: 0.14
> ##
> { 'struct': 'BlockInfo',
> 'data': {'device': 'str', '*qdev': 'str', 'type': 'str', 'removable': 'bool',
Complete no-brainer.
> @@ -795,9 +795,9 @@
> #
> # Statistics of a virtual block device or a block backing device.
> #
> -# @rd_bytes: The number of bytes read by the device.
> +# @rd_bytes: The number of bytes read by the device.
> #
> -# @wr_bytes: The number of bytes written by the device.
> +# @wr_bytes: The number of bytes written by the device.
> #
> # @unmap_bytes: The number of bytes unmapped by the device (Since 4.2)
> #
Almost a no-brainer. Commit f11f57e405a added these two aligned with
@rd_operations and @wr_operations. It also added unaligned ones. Later
on, @unmap_bytes was inserted unaligned in between.
> @@ -970,7 +970,7 @@
> # @qdev: The qdev ID, or if no ID is assigned, the QOM path of the block
> # device. (since 3.0)
> #
> -# @stats: A @BlockDeviceStats for the device.
> +# @stats: A @BlockDeviceStats for the device.
> #
> # @driver-specific: Optional driver-specific stats. (Since 4.2)
> #
> @@ -1275,7 +1275,7 @@
> #
> # @node-name: graph node name to get the image resized (Since 2.0)
> #
> -# @size: new image size in bytes
> +# @size: new image size in bytes
> #
> # Returns: - nothing on success
> # - If @device is not a valid block device, DeviceNotFound
> @@ -1960,8 +1960,8 @@
> # @job-id: identifier for the newly-created block job. If
> # omitted, the device name will be used. (Since 2.7)
> #
> -# @device: the device name or node-name of a root node whose writes should be
> -# mirrored.
> +# @device: the device name or node-name of a root node whose writes should be
> +# mirrored.
> #
> # @target: the target of the new image. If the file exists, or if it
> # is a device, the existing file/device will be used as the new
> @@ -1981,7 +1981,7 @@
> # @mode: whether and how QEMU should create a new image, default is
> # 'absolute-paths'.
> #
> -# @speed: the maximum speed, in bytes per second
> +# @speed: the maximum speed, in bytes per second
> #
> # @sync: what parts of the disk image should be copied to the destination
> # (all the disk, only the sectors allocated in the topmost image, or
> @@ -2296,7 +2296,7 @@
> # broken Quorum files. By default, @device is replaced, although
> # implicitly created filters on it are kept.
> #
> -# @speed: the maximum speed, in bytes per second
> +# @speed: the maximum speed, in bytes per second
> #
> # @sync: what parts of the disk image should be copied to the destination
> # (all the disk, only the sectors allocated in the topmost image, or
> @@ -4548,8 +4548,8 @@
> ##
> # @BlockdevQcow2Version:
> #
> -# @v2: The original QCOW2 format as introduced in qemu 0.10 (version 2)
> -# @v3: The extended QCOW2 format as introduced in qemu 1.1 (version 3)
> +# @v2: The original QCOW2 format as introduced in qemu 0.10 (version 2)
> +# @v3: The extended QCOW2 format as introduced in qemu 1.1 (version 3)
> #
> # Since: 2.12
> ##
> @@ -4905,7 +4905,7 @@
> #
> # Options for amending an image format
> #
> -# @driver: Block driver of the node to amend.
> +# @driver: Block driver of the node to amend.
> #
> # Since: 5.1
> ##
> diff --git a/qapi/block-export.json b/qapi/block-export.json
> index 1de16d2589..53013b03ff 100644
> --- a/qapi/block-export.json
> +++ b/qapi/block-export.json
> @@ -387,7 +387,7 @@
> # block-export-del command, but before the shutdown has
> # completed)
> #
> -# Since: 5.2
> +# Since: 5.2
> ##
> { 'struct': 'BlockExportInfo',
> 'data': { 'id': 'str',
> diff --git a/qapi/block.json b/qapi/block.json
> index 41b73c9934..96f557b3bb 100644
> --- a/qapi/block.json
> +++ b/qapi/block.json
> @@ -106,7 +106,7 @@
> # Returns: - Nothing on success
> # - If @device is not a valid block device, DeviceNotFound
> #
> -# Notes: Ejecting a device with no media results in success
> +# Notes: Ejecting a device with no media results in success
> #
> # Since: 0.14
> #
> diff --git a/qapi/char.json b/qapi/char.json
> index 8414ef2bc2..a40fe4b7bd 100644
> --- a/qapi/char.json
> +++ b/qapi/char.json
> @@ -216,7 +216,7 @@
> #
> # Configuration info for file chardevs.
> #
> -# @in: The name of the input file
> +# @in: The name of the input file
> # @out: The name of the output file
> # @append: Open the file in append mode (default false to
> # truncate) (Since 2.6)
> diff --git a/qapi/dump.json b/qapi/dump.json
> index 29441af9d8..90859c5483 100644
> --- a/qapi/dump.json
> +++ b/qapi/dump.json
> @@ -186,8 +186,8 @@
> #
> # Returns the available formats for dump-guest-memory
> #
> -# Returns: A @DumpGuestMemoryCapability object listing available formats for
> -# dump-guest-memory
> +# Returns: A @DumpGuestMemoryCapability object listing available formats for
> +# dump-guest-memory
> #
> # Since: 2.0
> #
> diff --git a/qapi/machine.json b/qapi/machine.json
> index 9f91e46e8b..6c120eb1bb 100644
> --- a/qapi/machine.json
> +++ b/qapi/machine.json
> @@ -315,9 +315,9 @@
> # query-current-machine), wake-up guest from suspend if the guest is
> # in SUSPENDED state. Return an error otherwise.
> #
> -# Since: 1.1
> +# Since: 1.1
> #
> -# Returns: nothing.
> +# Returns: nothing.
> #
> # Note: prior to 4.0, this command does nothing in case the guest
> # isn't suspended.
> @@ -368,9 +368,9 @@
> # Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs (ppc64).
> # The command fails when the guest doesn't support injecting.
> #
> -# Returns: If successful, nothing
> +# Returns: If successful, nothing
> #
> -# Since: 0.14
> +# Since: 0.14
> #
> # Note: prior to 2.1, this command was only supported for x86 and s390 VMs
> #
> diff --git a/qapi/misc-target.json b/qapi/misc-target.json
> index 2fa68a6796..4944c0528f 100644
> --- a/qapi/misc-target.json
> +++ b/qapi/misc-target.json
> @@ -136,9 +136,9 @@
> # The struct describes capability for a Secure Encrypted Virtualization
> # feature.
> #
> -# @pdh: Platform Diffie-Hellman key (base64 encoded)
> +# @pdh: Platform Diffie-Hellman key (base64 encoded)
> #
> -# @cert-chain: PDH certificate chain (base64 encoded)
> +# @cert-chain: PDH certificate chain (base64 encoded)
> #
> # @cpu0-id: Unique ID of CPU0 (base64 encoded) (since 7.1)
> #
> @@ -201,7 +201,7 @@
> # The struct describes attestation report for a Secure Encrypted
> # Virtualization feature.
> #
> -# @data: guest attestation report (base64 encoded)
> +# @data: guest attestation report (base64 encoded)
> #
> # Since: 6.1
> ##
> diff --git a/qapi/misc.json b/qapi/misc.json
> index b83cc39029..6aec6bdbf3 100644
> --- a/qapi/misc.json
> +++ b/qapi/misc.json
> @@ -136,7 +136,7 @@
> #
> # Stop all guest VCPU execution.
> #
> -# Since: 0.14
> +# Since: 0.14
> #
> # Notes: This function will succeed even if the guest is already in the stopped
> # state. In "inmigrate" state, it will ensure that the guest
> @@ -156,9 +156,9 @@
> #
> # Resume guest VCPU execution.
> #
> -# Since: 0.14
> +# Since: 0.14
> #
> -# Returns: If successful, nothing
> +# Returns: If successful, nothing
> #
> # Notes: This command will succeed if the guest is currently running. It
> # will also succeed if the guest is in the "inmigrate" state; in
> diff --git a/qapi/run-state.json b/qapi/run-state.json
> index 30a2f5231d..6e2162d7b3 100644
> --- a/qapi/run-state.json
> +++ b/qapi/run-state.json
> @@ -104,7 +104,7 @@
> #
> # @status: the virtual machine @RunState
> #
> -# Since: 0.14
> +# Since: 0.14
> #
> # Notes: @singlestep is enabled through the GDB stub
> ##
> @@ -118,7 +118,7 @@
> #
> # Returns: @StatusInfo reflecting all VCPUs
> #
> -# Since: 0.14
> +# Since: 0.14
> #
> # Example:
> #
> diff --git a/qapi/sockets.json b/qapi/sockets.json
> index fccc38584b..b4f84d3334 100644
> --- a/qapi/sockets.json
> +++ b/qapi/sockets.json
> @@ -189,7 +189,7 @@
> # Captures the address of a socket, which could also be a named file
> # descriptor
> #
> -# @type: Transport type
> +# @type: Transport type
> #
> # Since: 2.9
> ##
Single member with the description aligned to tab stop in colunn 16.
Likely done this way to provide for adding more without rejiggering the
alignment. Bah.
Improvement for me.
> diff --git a/qapi/ui.json b/qapi/ui.json
> index 9f19beea6d..c844237434 100644
> --- a/qapi/ui.json
> +++ b/qapi/ui.json
> @@ -1260,7 +1260,7 @@
> #
> # Curses display options.
> #
> -# @charset: Font charset used by guest (default: CP437).
> +# @charset: Font charset used by guest (default: CP437).
> #
> # Since: 4.0
> ##
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 6/8] qapi: Drop unnecessary whitespace in comments
2022-05-03 8:40 ` Markus Armbruster
@ 2022-05-03 16:23 ` Eric Blake
0 siblings, 0 replies; 15+ messages in thread
From: Eric Blake @ 2022-05-03 16:23 UTC (permalink / raw)
To: Markus Armbruster
Cc: Andrea Bolognani, qemu-devel, Juan Quintela, Paolo Bonzini,
Vladimir Sementsov-Ogievskiy, Dr. David Alan Gilbert,
Marcel Apfelbaum, qemu-block, Philippe Mathieu-Daudé,
Eduardo Habkost, Daniel P. Berrangé, Pavel Dovgalyuk,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
On Tue, May 03, 2022 at 10:40:35AM +0200, Markus Armbruster wrote:
> Andrea Bolognani <abologna@redhat.com> writes:
>
> > The only instances that get changed are those in which the
> > additional whitespace was not (or couldn't possibly be) used for
> > alignment purposes.
> >
> > Signed-off-by: Andrea Bolognani <abologna@redhat.com>
>
> This mixes complete no-brainers with "I consider it an improvement, but
> folks might disagree" (a few examples marked below for illustration).
>
> Well, folks, if you disagree, speak up! I don't:
> Reviewed-by: Markus Armbruster <armbru@redhat.com>
>
No complaints from me for the changes made in this patch.
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 8/8] qapi: Stop using whitespace for alignment in comments
2022-05-03 7:37 ` [PATCH v2 8/8] qapi: Stop using whitespace " Andrea Bolognani
@ 2022-05-03 16:25 ` Eric Blake
2022-05-12 11:23 ` Markus Armbruster
0 siblings, 1 reply; 15+ messages in thread
From: Eric Blake @ 2022-05-03 16:25 UTC (permalink / raw)
To: Andrea Bolognani
Cc: qemu-devel, Juan Quintela, Paolo Bonzini,
Vladimir Sementsov-Ogievskiy, Dr. David Alan Gilbert,
Marcel Apfelbaum, qemu-block, Philippe Mathieu-Daudé,
Eduardo Habkost, Daniel P. Berrangé, Pavel Dovgalyuk,
Markus Armbruster, Yanan Wang, Marc-André Lureau,
Gerd Hoffmann, John Snow
On Tue, May 03, 2022 at 09:37:37AM +0200, Andrea Bolognani wrote:
> Perfectly aligned things look pretty, but keeping them that
> way as the schema evolves requires churn, and in some cases
> newly-added lines are not aligned properly.
>
> Overall, trying to align things is just not worth the trouble.
I'm in favor of commiting 7+8 squashed as a single patch. 7 alone is
indeed a churn magnet, so I'm either for stopping the series at 6, or
going all the way to 8 via a single additional step.
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 8/8] qapi: Stop using whitespace for alignment in comments
2022-05-03 16:25 ` Eric Blake
@ 2022-05-12 11:23 ` Markus Armbruster
2022-05-16 5:28 ` Markus Armbruster
0 siblings, 1 reply; 15+ messages in thread
From: Markus Armbruster @ 2022-05-12 11:23 UTC (permalink / raw)
To: Eric Blake
Cc: Andrea Bolognani, qemu-devel, Juan Quintela, Paolo Bonzini,
Vladimir Sementsov-Ogievskiy, Dr. David Alan Gilbert,
Marcel Apfelbaum, qemu-block, Philippe Mathieu-Daudé,
Eduardo Habkost, Daniel P. Berrangé, Pavel Dovgalyuk,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow,
Kevin Wolf, Hanna Reitz
Eric Blake <eblake@redhat.com> writes:
> On Tue, May 03, 2022 at 09:37:37AM +0200, Andrea Bolognani wrote:
>> Perfectly aligned things look pretty, but keeping them that
>> way as the schema evolves requires churn, and in some cases
>> newly-added lines are not aligned properly.
>>
>> Overall, trying to align things is just not worth the trouble.
>
> I'm in favor of commiting 7+8 squashed as a single patch. 7 alone is
> indeed a churn magnet, so I'm either for stopping the series at 6, or
> going all the way to 8 via a single additional step.
Understood.
Diffstat for 7+8:
qapi/block-core.json | 53 ++++++++++++++++++++++++++--------------------------
qapi/block.json | 6 +++---
qapi/char.json | 6 +++---
qapi/control.json | 10 +++++-----
qapi/crypto.json | 42 ++++++++++++++++++++---------------------
qapi/migration.json | 8 ++++----
qapi/sockets.json | 4 ++--
qapi/ui.json | 17 ++++++++---------
8 files changed, 72 insertions(+), 74 deletions(-)
Considering we have >16k comment lines in qapi/*json, the churn feels
quite tolerable.
> Reviewed-by: Eric Blake <eblake@redhat.com>
Last call for objections: Kevin, Hanna, Gerd?
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 8/8] qapi: Stop using whitespace for alignment in comments
2022-05-12 11:23 ` Markus Armbruster
@ 2022-05-16 5:28 ` Markus Armbruster
0 siblings, 0 replies; 15+ messages in thread
From: Markus Armbruster @ 2022-05-16 5:28 UTC (permalink / raw)
To: Andrea Bolognani
Cc: Eric Blake, qemu-devel, Juan Quintela, Paolo Bonzini,
Vladimir Sementsov-Ogievskiy, Dr. David Alan Gilbert,
Marcel Apfelbaum, qemu-block, Philippe Mathieu-Daudé,
Eduardo Habkost, Daniel P. Berrangé, Pavel Dovgalyuk,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow,
Kevin Wolf, Hanna Reitz
Markus Armbruster <armbru@redhat.com> writes:
> Eric Blake <eblake@redhat.com> writes:
>
>> On Tue, May 03, 2022 at 09:37:37AM +0200, Andrea Bolognani wrote:
>>> Perfectly aligned things look pretty, but keeping them that
>>> way as the schema evolves requires churn, and in some cases
>>> newly-added lines are not aligned properly.
>>>
>>> Overall, trying to align things is just not worth the trouble.
>>
>> I'm in favor of commiting 7+8 squashed as a single patch. 7 alone is
>> indeed a churn magnet, so I'm either for stopping the series at 6, or
>> going all the way to 8 via a single additional step.
>
> Understood.
>
> Diffstat for 7+8:
>
> qapi/block-core.json | 53 ++++++++++++++++++++++++++--------------------------
> qapi/block.json | 6 +++---
> qapi/char.json | 6 +++---
> qapi/control.json | 10 +++++-----
> qapi/crypto.json | 42 ++++++++++++++++++++---------------------
> qapi/migration.json | 8 ++++----
> qapi/sockets.json | 4 ++--
> qapi/ui.json | 17 ++++++++---------
> 8 files changed, 72 insertions(+), 74 deletions(-)
>
> Considering we have >16k comment lines in qapi/*json, the churn feels
> quite tolerable.
>
>> Reviewed-by: Eric Blake <eblake@redhat.com>
>
> Last call for objections: Kevin, Hanna, Gerd?
The two patches squashed together:
Reviewed-by: Markus Armbruster <armbru@redhat.com>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 0/8] qapi: Primarily whitespace tweaks
2022-05-03 7:37 [PATCH v2 0/8] qapi: Primarily whitespace tweaks Andrea Bolognani
` (7 preceding siblings ...)
2022-05-03 7:37 ` [PATCH v2 8/8] qapi: Stop using whitespace " Andrea Bolognani
@ 2022-05-16 5:46 ` Markus Armbruster
8 siblings, 0 replies; 15+ messages in thread
From: Markus Armbruster @ 2022-05-16 5:46 UTC (permalink / raw)
To: Andrea Bolognani
Cc: qemu-devel, Juan Quintela, Paolo Bonzini,
Vladimir Sementsov-Ogievskiy, Eric Blake, Dr. David Alan Gilbert,
Marcel Apfelbaum, qemu-block, Philippe Mathieu-Daudé,
Eduardo Habkost, Daniel P. Berrangé, Pavel Dovgalyuk,
Yanan Wang, Marc-André Lureau, Gerd Hoffmann, John Snow
Andrea Bolognani <abologna@redhat.com> writes:
> If patch 8/8 is accepted, 7/8 should be squashed into it to reduce
> churn.
Done & queued. Thanks!
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2022-05-16 5:51 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-05-03 7:37 [PATCH v2 0/8] qapi: Primarily whitespace tweaks Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 1/8] qapi: Drop stray trailing symbol Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 2/8] qapi: Fix comment indentation Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 3/8] qapi: Add missing separators between sections Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 4/8] qapi: Drop unnecessary empty lines in comments Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 5/8] qapi: Drop unnecessary empty lines outside of comments Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 6/8] qapi: Drop unnecessary whitespace in comments Andrea Bolognani
2022-05-03 8:40 ` Markus Armbruster
2022-05-03 16:23 ` Eric Blake
2022-05-03 7:37 ` [PATCH v2 7/8] qapi: Reduce whitespace used for alignment " Andrea Bolognani
2022-05-03 7:37 ` [PATCH v2 8/8] qapi: Stop using whitespace " Andrea Bolognani
2022-05-03 16:25 ` Eric Blake
2022-05-12 11:23 ` Markus Armbruster
2022-05-16 5:28 ` Markus Armbruster
2022-05-16 5:46 ` [PATCH v2 0/8] qapi: Primarily whitespace tweaks Markus Armbruster
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).