From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Ben Widawsky" <ben.widawsky@intel.com>,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>,
"Alex Bennée" <alex.bennee@linaro.org>
Subject: [PULL 09/91] hw/cxl/device: Add memory device utilities
Date: Mon, 16 May 2022 06:36:07 -0400 [thread overview]
Message-ID: <20220516095448.507876-10-mst@redhat.com> (raw)
In-Reply-To: <20220516095448.507876-1-mst@redhat.com>
From: Ben Widawsky <ben.widawsky@intel.com>
Memory devices implement extra capabilities on top of CXL devices. This
adds support for that.
A large part of memory devices is the mailbox/command interface. All of
the mailbox handling is done in the mailbox-utils library. Longer term,
new CXL devices that are being emulated may want to handle commands
differently, and therefore would need a mechanism to opt in/out of the
specific generic handlers. As such, this is considered sufficient for
now, but may need more depth in the future.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/cxl/cxl_device.h | 21 +++++++++++++++++---
hw/cxl/cxl-device-utils.c | 38 ++++++++++++++++++++++++++++++++++++-
2 files changed, 55 insertions(+), 4 deletions(-)
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 35489f635a..954205653e 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -72,15 +72,20 @@
#define CXL_MAILBOX_REGISTERS_LENGTH \
(CXL_MAILBOX_REGISTERS_SIZE + CXL_MAILBOX_MAX_PAYLOAD_SIZE)
-#define CXL_MMIO_SIZE \
- (CXL_DEVICE_CAP_REG_SIZE + CXL_DEVICE_STATUS_REGISTERS_LENGTH + \
- CXL_MAILBOX_REGISTERS_LENGTH)
+#define CXL_MEMORY_DEVICE_REGISTERS_OFFSET \
+ (CXL_MAILBOX_REGISTERS_OFFSET + CXL_MAILBOX_REGISTERS_LENGTH)
+#define CXL_MEMORY_DEVICE_REGISTERS_LENGTH 0x8
+
+#define CXL_MMIO_SIZE \
+ (CXL_DEVICE_CAP_REG_SIZE + CXL_DEVICE_STATUS_REGISTERS_LENGTH + \
+ CXL_MAILBOX_REGISTERS_LENGTH + CXL_MEMORY_DEVICE_REGISTERS_LENGTH)
typedef struct cxl_device_state {
MemoryRegion device_registers;
/* mmio for device capabilities array - 8.2.8.2 */
MemoryRegion device;
+ MemoryRegion memory_device;
struct {
MemoryRegion caps;
union {
@@ -153,6 +158,9 @@ REG64(CXL_DEV_CAP_ARRAY, 0) /* Documented as 128 bit register but 64 byte access
CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE_STATUS, CXL_DEVICE_CAP_HDR1_OFFSET)
CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
CXL_DEVICE_CAP_REG_SIZE)
+CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MEMORY_DEVICE,
+ CXL_DEVICE_CAP_HDR1_OFFSET +
+ CXL_DEVICE_CAP_REG_SIZE * 2)
int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate);
void cxl_process_mailbox(CXLDeviceState *cxl_dstate);
@@ -209,4 +217,11 @@ REG64(CXL_DEV_BG_CMD_STS, 0x18)
/* CXL 2.0 8.2.8.4.8 Command Payload Registers */
REG32(CXL_DEV_CMD_PAYLOAD, 0x20)
+REG64(CXL_MEM_DEV_STS, 0)
+ FIELD(CXL_MEM_DEV_STS, FATAL, 0, 1)
+ FIELD(CXL_MEM_DEV_STS, FW_HALT, 1, 1)
+ FIELD(CXL_MEM_DEV_STS, MEDIA_STATUS, 2, 2)
+ FIELD(CXL_MEM_DEV_STS, MBOX_READY, 4, 1)
+ FIELD(CXL_MEM_DEV_STS, RESET_NEEDED, 5, 3)
+
#endif
diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
index f6c3e0f095..687759b301 100644
--- a/hw/cxl/cxl-device-utils.c
+++ b/hw/cxl/cxl-device-utils.c
@@ -131,6 +131,31 @@ static void mailbox_reg_write(void *opaque, hwaddr offset, uint64_t value,
}
}
+static uint64_t mdev_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+ uint64_t retval = 0;
+
+ retval = FIELD_DP64(retval, CXL_MEM_DEV_STS, MEDIA_STATUS, 1);
+ retval = FIELD_DP64(retval, CXL_MEM_DEV_STS, MBOX_READY, 1);
+
+ return retval;
+}
+
+static const MemoryRegionOps mdev_ops = {
+ .read = mdev_reg_read,
+ .write = NULL, /* memory device register is read only */
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = false,
+ },
+ .impl = {
+ .min_access_size = 8,
+ .max_access_size = 8,
+ },
+};
+
static const MemoryRegionOps mailbox_ops = {
.read = mailbox_reg_read,
.write = mailbox_reg_write,
@@ -188,6 +213,9 @@ void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
"device-status", CXL_DEVICE_STATUS_REGISTERS_LENGTH);
memory_region_init_io(&cxl_dstate->mailbox, obj, &mailbox_ops, cxl_dstate,
"mailbox", CXL_MAILBOX_REGISTERS_LENGTH);
+ memory_region_init_io(&cxl_dstate->memory_device, obj, &mdev_ops,
+ cxl_dstate, "memory device caps",
+ CXL_MEMORY_DEVICE_REGISTERS_LENGTH);
memory_region_add_subregion(&cxl_dstate->device_registers, 0,
&cxl_dstate->caps);
@@ -197,6 +225,9 @@ void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
memory_region_add_subregion(&cxl_dstate->device_registers,
CXL_MAILBOX_REGISTERS_OFFSET,
&cxl_dstate->mailbox);
+ memory_region_add_subregion(&cxl_dstate->device_registers,
+ CXL_MEMORY_DEVICE_REGISTERS_OFFSET,
+ &cxl_dstate->memory_device);
}
static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
@@ -209,10 +240,12 @@ static void mailbox_reg_init_common(CXLDeviceState *cxl_dstate)
cxl_dstate->payload_size = CXL_MAILBOX_MAX_PAYLOAD_SIZE;
}
+static void memdev_reg_init_common(CXLDeviceState *cxl_dstate) { }
+
void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
{
uint64_t *cap_hdrs = cxl_dstate->caps_reg_state64;
- const int cap_count = 2;
+ const int cap_count = 3;
/* CXL Device Capabilities Array Register */
ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
@@ -225,5 +258,8 @@ void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
cxl_device_cap_init(cxl_dstate, MAILBOX, 2);
mailbox_reg_init_common(cxl_dstate);
+ cxl_device_cap_init(cxl_dstate, MEMORY_DEVICE, 0x4000);
+ memdev_reg_init_common(cxl_dstate);
+
assert(cxl_initialize_mailbox(cxl_dstate) == 0);
}
--
MST
next prev parent reply other threads:[~2022-05-16 10:56 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-16 10:35 [PULL 00/91] virtio,pc,pci: fixes,cleanups,features Michael S. Tsirkin
2022-05-16 10:35 ` [PULL 01/91] virtio: fix feature negotiation for ACCESS_PLATFORM Michael S. Tsirkin
2022-05-16 10:35 ` [PULL 02/91] intel-iommu: correct the value used for error_setg_errno() Michael S. Tsirkin
2022-05-16 10:35 ` [PULL 03/91] hw/pci/cxl: Add a CXL component type (interface) Michael S. Tsirkin
2022-05-16 10:35 ` [PULL 04/91] hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5) Michael S. Tsirkin
2022-05-16 10:35 ` [PULL 05/91] MAINTAINERS: Add entry for Compute Express Link Emulation Michael S. Tsirkin
2022-05-16 10:35 ` [PULL 06/91] hw/cxl/device: Introduce a CXL device (8.2.8) Michael S. Tsirkin
2022-05-16 10:35 ` [PULL 07/91] hw/cxl/device: Implement the CAP array (8.2.8.1-2) Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 08/91] hw/cxl/device: Implement basic mailbox (8.2.8.4) Michael S. Tsirkin
2022-05-16 10:36 ` Michael S. Tsirkin [this message]
2022-05-16 10:36 ` [PULL 10/91] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1) Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 11/91] hw/cxl/device: Timestamp implementation (8.2.9.3) Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 12/91] hw/cxl/device: Add log commands (8.2.9.4) + CEL Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 13/91] hw/pxb: Use a type for realizing expanders Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 14/91] hw/pci/cxl: Create a CXL bus type Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 15/91] cxl: Machine level control on whether CXL support is enabled Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 16/91] hw/pxb: Allow creation of a CXL PXB (host bridge) Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 17/91] qtest/cxl: Introduce initial test for pxb-cxl only Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 18/91] hw/cxl/rp: Add a root port Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 19/91] hw/cxl/device: Add a memory device (8.2.8.5) Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 20/91] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12) Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 21/91] hw/cxl/device: Add some trivial commands Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 22/91] hw/cxl/device: Plumb real Label Storage Area (LSA) sizing Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 23/91] hw/cxl/device: Implement get/set Label Storage Area (LSA) Michael S. Tsirkin
2022-05-16 10:36 ` [PULL 24/91] qtests/cxl: Add initial root port and CXL type3 tests Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 25/91] hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142) Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 26/91] acpi/cxl: Add _OSC implementation (9.14.2) Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 27/91] acpi/cxl: Create the CEDT (9.14.1) Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 28/91] hw/cxl/component: Add utils for interleave parameter encoding/decoding Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 29/91] hw/cxl/host: Add support for CXL Fixed Memory Windows Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 30/91] acpi/cxl: Introduce CFMWS structures in CEDT Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 31/91] hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 32/91] pci/pcie_port: Add pci_find_port_by_pn() Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 33/91] CXL/cxl_component: Add cxl_get_hb_cstate() Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 34/91] mem/cxl_type3: Add read and write functions for associated hostmem Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 35/91] cxl/cxl-host: Add memops for CFMWS region Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 36/91] hw/cxl/component Add a dumb HDM decoder handler Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 37/91] i386/pc: Enable CXL fixed memory windows Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 38/91] tests/acpi: q35: Allow addition of a CXL test Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 39/91] qtests/bios-tables-test: Add a test for CXL emulation Michael S. Tsirkin
2022-05-16 10:37 ` [PULL 40/91] tests/acpi: Add tables " Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 41/91] qtest/cxl: Add more complex test cases with CFMWs Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 42/91] docs/cxl: Add initial Compute eXpress Link (CXL) documentation Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 43/91] vhost: Track descriptor chain in private at SVQ Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 44/91] vhost: Fix device's used descriptor dequeue Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 45/91] vdpa: Fix bad index calculus at vhost_vdpa_get_vring_base Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 46/91] vdpa: Fix index calculus at vhost_vdpa_svqs_start Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 47/91] hw/virtio: Replace g_memdup() by g_memdup2() Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 48/91] vhost: Fix element in vhost_svq_add failure Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 49/91] target/i386: Fix sanity check on max APIC ID / X2APIC enablement Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 50/91] intel_iommu: Support IR-only mode without DMA translation Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 51/91] intel_iommu: Only allow interrupt remapping to be enabled if it's supported Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 52/91] intel_iommu: Fix irqchip / X2APIC configuration checks Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 53/91] intel-iommu: remove VTD_FR_RESERVED_ERR Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 54/91] intel-iommu: block output address in interrupt address range Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 55/91] intel-iommu: update root_scalable before switching as during post_load Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 56/91] intel-iommu: update iq_dw during post load Michael S. Tsirkin
2022-05-16 10:38 ` [PULL 57/91] vhost_net: Print feature masks in hex Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 58/91] hw/virtio: move virtio-pci.h into shared include space Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 59/91] virtio-pci: add notification trace points Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 60/91] hw/virtio: add vhost_user_[read|write] " Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 61/91] docs: vhost-user: clean up request/reply description Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 62/91] docs: vhost-user: rewrite section on ring state machine Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 63/91] docs: vhost-user: replace master/slave with front-end/back-end Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 64/91] vhost-user.rst: add clarifying language about protocol negotiation Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 65/91] libvhost-user: expose vu_request_to_string Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 66/91] docs/devel: start documenting writing VirtIO devices Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 67/91] include/hw: start documenting the vhost API Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 68/91] hw/virtio/vhost-user: don't suppress F_CONFIG when supported Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 69/91] virtio/vhost-user: dynamically assign VhostUserHostNotifiers Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 70/91] virtio: drop name parameter for virtio_init() Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 71/91] virtio: add vhost support for virtio devices Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 72/91] qmp: add QMP command x-query-virtio Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 73/91] qmp: add QMP command x-query-virtio-status Michael S. Tsirkin
2022-05-16 10:39 ` [PULL 74/91] qmp: decode feature & status bits in virtio-status Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 75/91] qmp: add QMP commands for virtio/vhost queue-status Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 76/91] qmp: add QMP command x-query-virtio-queue-element Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 77/91] hmp: add virtio commands Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 78/91] vhost-user: more master/slave things Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 79/91] docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 80/91] include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 81/91] include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 82/91] hw/i386: Make pit a property of common x86 base machine type Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 83/91] hw/i386: Make pic " Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 84/91] hw/i386/amd_iommu: Fix IOMMU event log encoding errors Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 85/91] virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 86/91] virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 87/91] vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 88/91] vhost-net: fix improper cleanup in vhost_net_start Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 89/91] vhost-vdpa: backend feature should set only once Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 90/91] vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request() Michael S. Tsirkin
2022-05-16 10:40 ` [PULL 91/91] virtio-net: don't handle mq request in userspace handler for vhost-vdpa Michael S. Tsirkin
2022-05-16 19:01 ` [PULL 00/91] virtio,pc,pci: fixes,cleanups,features Richard Henderson
2022-05-16 20:05 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220516095448.507876-10-mst@redhat.com \
--to=mst@redhat.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alex.bennee@linaro.org \
--cc=ben.widawsky@intel.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).