From: Alistair Francis <alistair.francis@opensource.wdc.com>
To: qemu-devel@nongnu.org
Cc: alistair23@gmail.com, Bin Meng <bin.meng@windriver.com>,
Alistair Francis <alistair.francis@wdc.com>
Subject: [PULL 22/23] hw/core: Sync uboot_image.h from U-Boot v2022.01
Date: Wed, 25 May 2022 08:44:27 +1000 [thread overview]
Message-ID: <20220524224428.552334-23-alistair.francis@opensource.wdc.com> (raw)
In-Reply-To: <20220524224428.552334-1-alistair.francis@opensource.wdc.com>
From: Bin Meng <bin.meng@windriver.com>
Sync uboot_image.h from upstream U-Boot v2022.01 release [1].
[1] https://source.denx.de/u-boot/u-boot/-/blob/v2022.01/include/image.h
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220324134812.541274-1-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/core/uboot_image.h | 213 ++++++++++++++++++++++++++++--------------
1 file changed, 142 insertions(+), 71 deletions(-)
diff --git a/hw/core/uboot_image.h b/hw/core/uboot_image.h
index 608022de6e..18ac293359 100644
--- a/hw/core/uboot_image.h
+++ b/hw/core/uboot_image.h
@@ -1,23 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
+ * (C) Copyright 2008 Semihalf
+ *
* (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
********************************************************************
* NOTE: This header file defines an interface to U-Boot. Including
* this (unmodified) header file in another file is considered normal
@@ -31,50 +17,83 @@
/*
* Operating System Codes
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
-#define IH_OS_INVALID 0 /* Invalid OS */
-#define IH_OS_OPENBSD 1 /* OpenBSD */
-#define IH_OS_NETBSD 2 /* NetBSD */
-#define IH_OS_FREEBSD 3 /* FreeBSD */
-#define IH_OS_4_4BSD 4 /* 4.4BSD */
-#define IH_OS_LINUX 5 /* Linux */
-#define IH_OS_SVR4 6 /* SVR4 */
-#define IH_OS_ESIX 7 /* Esix */
-#define IH_OS_SOLARIS 8 /* Solaris */
-#define IH_OS_IRIX 9 /* Irix */
-#define IH_OS_SCO 10 /* SCO */
-#define IH_OS_DELL 11 /* Dell */
-#define IH_OS_NCR 12 /* NCR */
-#define IH_OS_LYNXOS 13 /* LynxOS */
-#define IH_OS_VXWORKS 14 /* VxWorks */
-#define IH_OS_PSOS 15 /* pSOS */
-#define IH_OS_QNX 16 /* QNX */
-#define IH_OS_U_BOOT 17 /* Firmware */
-#define IH_OS_RTEMS 18 /* RTEMS */
-#define IH_OS_ARTOS 19 /* ARTOS */
-#define IH_OS_UNITY 20 /* Unity OS */
+enum {
+ IH_OS_INVALID = 0, /* Invalid OS */
+ IH_OS_OPENBSD, /* OpenBSD */
+ IH_OS_NETBSD, /* NetBSD */
+ IH_OS_FREEBSD, /* FreeBSD */
+ IH_OS_4_4BSD, /* 4.4BSD */
+ IH_OS_LINUX, /* Linux */
+ IH_OS_SVR4, /* SVR4 */
+ IH_OS_ESIX, /* Esix */
+ IH_OS_SOLARIS, /* Solaris */
+ IH_OS_IRIX, /* Irix */
+ IH_OS_SCO, /* SCO */
+ IH_OS_DELL, /* Dell */
+ IH_OS_NCR, /* NCR */
+ IH_OS_LYNXOS, /* LynxOS */
+ IH_OS_VXWORKS, /* VxWorks */
+ IH_OS_PSOS, /* pSOS */
+ IH_OS_QNX, /* QNX */
+ IH_OS_U_BOOT, /* Firmware */
+ IH_OS_RTEMS, /* RTEMS */
+ IH_OS_ARTOS, /* ARTOS */
+ IH_OS_UNITY, /* Unity OS */
+ IH_OS_INTEGRITY, /* INTEGRITY */
+ IH_OS_OSE, /* OSE */
+ IH_OS_PLAN9, /* Plan 9 */
+ IH_OS_OPENRTOS, /* OpenRTOS */
+ IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */
+ IH_OS_TEE, /* Trusted Execution Environment */
+ IH_OS_OPENSBI, /* RISC-V OpenSBI */
+ IH_OS_EFI, /* EFI Firmware (e.g. GRUB2) */
+
+ IH_OS_COUNT,
+};
/*
* CPU Architecture Codes (supported by Linux)
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
-#define IH_CPU_INVALID 0 /* Invalid CPU */
-#define IH_CPU_ALPHA 1 /* Alpha */
-#define IH_CPU_ARM 2 /* ARM */
-#define IH_CPU_I386 3 /* Intel x86 */
-#define IH_CPU_IA64 4 /* IA64 */
-#define IH_CPU_MIPS 5 /* MIPS */
-#define IH_CPU_MIPS64 6 /* MIPS 64 Bit */
-#define IH_CPU_PPC 7 /* PowerPC */
-#define IH_CPU_S390 8 /* IBM S390 */
-#define IH_CPU_SH 9 /* SuperH */
-#define IH_CPU_SPARC 10 /* Sparc */
-#define IH_CPU_SPARC64 11 /* Sparc 64 Bit */
-#define IH_CPU_M68K 12 /* M68K */
-#define IH_CPU_NIOS 13 /* Nios-32 */
-#define IH_CPU_MICROBLAZE 14 /* MicroBlaze */
-#define IH_CPU_NIOS2 15 /* Nios-II */
-#define IH_CPU_BLACKFIN 16 /* Blackfin */
-#define IH_CPU_AVR32 17 /* AVR32 */
+enum {
+ IH_ARCH_INVALID = 0, /* Invalid CPU */
+ IH_ARCH_ALPHA, /* Alpha */
+ IH_ARCH_ARM, /* ARM */
+ IH_ARCH_I386, /* Intel x86 */
+ IH_ARCH_IA64, /* IA64 */
+ IH_ARCH_MIPS, /* MIPS */
+ IH_ARCH_MIPS64, /* MIPS 64 Bit */
+ IH_ARCH_PPC, /* PowerPC */
+ IH_ARCH_S390, /* IBM S390 */
+ IH_ARCH_SH, /* SuperH */
+ IH_ARCH_SPARC, /* Sparc */
+ IH_ARCH_SPARC64, /* Sparc 64 Bit */
+ IH_ARCH_M68K, /* M68K */
+ IH_ARCH_NIOS, /* Nios-32 */
+ IH_ARCH_MICROBLAZE, /* MicroBlaze */
+ IH_ARCH_NIOS2, /* Nios-II */
+ IH_ARCH_BLACKFIN, /* Blackfin */
+ IH_ARCH_AVR32, /* AVR32 */
+ IH_ARCH_ST200, /* STMicroelectronics ST200 */
+ IH_ARCH_SANDBOX, /* Sandbox architecture (test only) */
+ IH_ARCH_NDS32, /* ANDES Technology - NDS32 */
+ IH_ARCH_OPENRISC, /* OpenRISC 1000 */
+ IH_ARCH_ARM64, /* ARM64 */
+ IH_ARCH_ARC, /* Synopsys DesignWare ARC */
+ IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */
+ IH_ARCH_XTENSA, /* Xtensa */
+ IH_ARCH_RISCV, /* RISC-V */
+
+ IH_ARCH_COUNT,
+};
/*
* Image Types
@@ -113,33 +132,85 @@
* U-Boot's command interpreter; this feature is especially
* useful when you configure U-Boot to use a real shell (hush)
* as command interpreter (=> Shell Scripts).
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
-#define IH_TYPE_INVALID 0 /* Invalid Image */
-#define IH_TYPE_STANDALONE 1 /* Standalone Program */
-#define IH_TYPE_KERNEL 2 /* OS Kernel Image */
-#define IH_TYPE_RAMDISK 3 /* RAMDisk Image */
-#define IH_TYPE_MULTI 4 /* Multi-File Image */
-#define IH_TYPE_FIRMWARE 5 /* Firmware Image */
-#define IH_TYPE_SCRIPT 6 /* Script file */
-#define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */
-#define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */
-#define IH_TYPE_KERNEL_NOLOAD 14 /* OS Kernel Image (noload) */
+enum {
+ IH_TYPE_INVALID = 0, /* Invalid Image */
+ IH_TYPE_STANDALONE, /* Standalone Program */
+ IH_TYPE_KERNEL, /* OS Kernel Image */
+ IH_TYPE_RAMDISK, /* RAMDisk Image */
+ IH_TYPE_MULTI, /* Multi-File Image */
+ IH_TYPE_FIRMWARE, /* Firmware Image */
+ IH_TYPE_SCRIPT, /* Script file */
+ IH_TYPE_FILESYSTEM, /* Filesystem Image (any type) */
+ IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */
+ IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */
+ IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */
+ IH_TYPE_UBLIMAGE, /* Davinci UBL Image */
+ IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */
+ IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */
+ /* OS Kernel Image, can run from any load address */
+ IH_TYPE_KERNEL_NOLOAD,
+ IH_TYPE_PBLIMAGE, /* Freescale PBL Boot Image */
+ IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */
+ IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */
+ IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */
+ IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA CV/AV Preloader */
+ IH_TYPE_X86_SETUP, /* x86 setup.bin Image */
+ IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */
+ IH_TYPE_LOADABLE, /* A list of typeless images */
+ IH_TYPE_RKIMAGE, /* Rockchip Boot Image */
+ IH_TYPE_RKSD, /* Rockchip SD card */
+ IH_TYPE_RKSPI, /* Rockchip SPI image */
+ IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */
+ IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */
+ IH_TYPE_ZYNQMPBIF, /* Xilinx ZynqMP Boot Image (bif) */
+ IH_TYPE_FPGA, /* FPGA Image */
+ IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */
+ IH_TYPE_TEE, /* Trusted Execution Environment OS Image */
+ IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */
+ IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */
+ IH_TYPE_STM32IMAGE, /* STMicroelectronics STM32 Image */
+ IH_TYPE_SOCFPGAIMAGE_V1, /* Altera SOCFPGA A10 Preloader */
+ IH_TYPE_MTKIMAGE, /* MediaTek BootROM loadable Image */
+ IH_TYPE_IMX8MIMAGE, /* Freescale IMX8MBoot Image */
+ IH_TYPE_IMX8IMAGE, /* Freescale IMX8Boot Image */
+ IH_TYPE_COPRO, /* Coprocessor Image for remoteproc*/
+ IH_TYPE_SUNXI_EGON, /* Allwinner eGON Boot Image */
+
+ IH_TYPE_COUNT, /* Number of image types */
+};
/*
* Compression Types
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
-#define IH_COMP_NONE 0 /* No Compression Used */
-#define IH_COMP_GZIP 1 /* gzip Compression Used */
-#define IH_COMP_BZIP2 2 /* bzip2 Compression Used */
+enum {
+ IH_COMP_NONE = 0, /* No Compression Used */
+ IH_COMP_GZIP, /* gzip Compression Used */
+ IH_COMP_BZIP2, /* bzip2 Compression Used */
+ IH_COMP_LZMA, /* lzma Compression Used */
+ IH_COMP_LZO, /* lzo Compression Used */
+ IH_COMP_LZ4, /* lz4 Compression Used */
+ IH_COMP_ZSTD, /* zstd Compression Used */
+
+ IH_COMP_COUNT,
+};
#define IH_MAGIC 0x27051956 /* Image Magic Number */
#define IH_NMLEN 32 /* Image Name Length */
/*
- * all data in network byte order (aka natural aka bigendian)
+ * Legacy format image header,
+ * all data in network byte order (aka natural aka bigendian).
*/
-
typedef struct uboot_image_header {
uint32_t ih_magic; /* Image Header Magic Number */
uint32_t ih_hcrc; /* Image Header CRC Checksum */
--
2.35.3
next prev parent reply other threads:[~2022-05-24 23:14 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-24 22:44 [PULL 00/23] riscv-to-apply queue Alistair Francis
2022-05-24 22:44 ` [PULL 01/23] target/riscv: Fix VS mode hypervisor CSR access Alistair Francis
2022-05-24 22:44 ` [PULL 02/23] target/riscv: rvv: Fix early exit condition for whole register load/store Alistair Francis
2022-05-24 22:44 ` [PULL 03/23] hw/intc: Pass correct hartid while updating mtimecmp Alistair Francis
2022-05-24 22:44 ` [PULL 04/23] target/riscv: Move Zhinx* extensions on ISA string Alistair Francis
2022-05-24 22:44 ` [PULL 05/23] target/riscv: Add short-isa-string option Alistair Francis
2022-05-24 22:44 ` [PULL 06/23] hw/riscv: Make CPU config error handling generous (virt/spike) Alistair Francis
2022-05-24 22:44 ` [PULL 07/23] hw/riscv: Make CPU config error handling generous (sifive_e/u/opentitan) Alistair Francis
2022-05-24 22:44 ` [PULL 08/23] target/riscv: Fix coding style on "G" expansion Alistair Francis
2022-05-24 22:44 ` [PULL 09/23] target/riscv: Disable "G" by default Alistair Francis
2022-05-24 22:44 ` [PULL 10/23] target/riscv: Change "G" expansion Alistair Francis
2022-05-24 22:44 ` [PULL 11/23] target/riscv: FP extension requirements Alistair Francis
2022-05-24 22:44 ` [PULL 12/23] target/riscv: Move/refactor ISA extension checks Alistair Francis
2022-05-24 22:44 ` [PULL 13/23] hw/vfio/pci-quirks: Resolve redundant property getters Alistair Francis
2022-05-24 22:44 ` [PULL 14/23] hw/riscv/sifive_u: Resolve redundant property accessors Alistair Francis
2022-05-24 22:44 ` [PULL 15/23] target/riscv: check 'I' and 'E' after checking 'G' in riscv_cpu_realize Alistair Francis
2022-05-24 22:44 ` [PULL 16/23] target/riscv: Fix typo of mimpid cpu option Alistair Francis
2022-05-24 22:44 ` [PULL 17/23] target/riscv: Fix csr number based privilege checking Alistair Francis
2022-05-24 22:44 ` [PULL 18/23] target/riscv: Fix hstatus.GVA bit setting for traps taken from HS-mode Alistair Francis
2022-05-24 22:44 ` [PULL 19/23] target/riscv: Set [m|s]tval for both illegal and virtual instruction traps Alistair Francis
2022-05-24 22:44 ` [PULL 20/23] hw/riscv: virt: Fix interrupt parent for dynamic platform devices Alistair Francis
2022-05-24 22:44 ` [PULL 21/23] target/riscv: add zicsr/zifencei to isa_string Alistair Francis
2022-05-24 22:44 ` Alistair Francis [this message]
2022-05-24 22:44 ` [PULL 23/23] hw/core: loader: Set is_linux to true for VxWorks uImage Alistair Francis
2022-05-25 3:18 ` [PULL 00/23] riscv-to-apply queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220524224428.552334-23-alistair.francis@opensource.wdc.com \
--to=alistair.francis@opensource.wdc.com \
--cc=alistair.francis@wdc.com \
--cc=alistair23@gmail.com \
--cc=bin.meng@windriver.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).