From: Jonathan Cameron via <qemu-devel@nongnu.org>
To: <qemu-devel@nongnu.org>, <alex.bennee@linaro.org>,
Peter Maydell <peter.maydell@linaro.org>, <qemu-arm@nongnu.org>,
"Michael S . Tsirkin" <mst@redhat.com>,
Ben Widawsky <bwidawsk@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>, <linux-cxl@vger.kernel.org>,
<linuxarm@huawei.com>, Marcel Apfelbaum <marcel@redhat.com>,
Igor Mammedov <imammedo@redhat.com>,
Markus Armbruster <armbru@redhat.com>,
"Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>,
Adam Manzanares <a.manzanares@samsung.com>,
Tong Zhang <ztong0001@gmail.com>,
"Shameerali Kolothum Thodi"
<shameerali.kolothum.thodi@huawei.com>
Subject: [PATCH v11 1/2] hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances pxb-cxl
Date: Thu, 16 Jun 2022 15:19:49 +0100 [thread overview]
Message-ID: <20220616141950.23374-2-Jonathan.Cameron@huawei.com> (raw)
In-Reply-To: <20220616141950.23374-1-Jonathan.Cameron@huawei.com>
Code based on i386/pc enablement.
The memory layout places space for 16 host bridge register regions after
the GIC_REDIST2 in the extended memmap.
The CFMWs are placed above the extended memmap.
Only create the CEDT table if cxl=on set for the machine.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/arm/virt-acpi-build.c | 34 +++++++++++++++++++++++++++++++
hw/arm/virt.c | 44 ++++++++++++++++++++++++++++++++++++++++
include/hw/arm/virt.h | 3 +++
3 files changed, 81 insertions(+)
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 449fab0080..d47efcb297 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -39,9 +39,11 @@
#include "hw/acpi/aml-build.h"
#include "hw/acpi/utils.h"
#include "hw/acpi/pci.h"
+#include "hw/acpi/cxl.h"
#include "hw/acpi/memory_hotplug.h"
#include "hw/acpi/generic_event_device.h"
#include "hw/acpi/tpm.h"
+#include "hw/cxl/cxl.h"
#include "hw/pci/pcie_host.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_bus.h"
@@ -157,10 +159,29 @@ static void acpi_dsdt_add_virtio(Aml *scope,
}
}
+/* Uses local definition of AcpiBuildState so can't easily be common code */
+static void build_acpi0017(Aml *table)
+{
+ Aml *dev, *scope, *method;
+
+ scope = aml_scope("_SB");
+ dev = aml_device("CXLM");
+ aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0017")));
+
+ method = aml_method("_STA", 0, AML_NOTSERIALIZED);
+ aml_append(method, aml_return(aml_int(0x01)));
+ aml_append(dev, method);
+
+ aml_append(scope, dev);
+ aml_append(table, scope);
+}
+
static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
uint32_t irq, VirtMachineState *vms)
{
int ecam_id = VIRT_ECAM_ID(vms->highmem_ecam);
+ bool cxl_present = false;
+ PCIBus *bus = vms->bus;
struct GPEXConfig cfg = {
.mmio32 = memmap[VIRT_PCIE_MMIO],
.pio = memmap[VIRT_PCIE_PIO],
@@ -174,6 +195,14 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
}
acpi_dsdt_add_gpex(scope, &cfg);
+ QLIST_FOREACH(bus, &vms->bus->child, sibling) {
+ if (pci_bus_is_cxl(bus)) {
+ cxl_present = true;
+ }
+ }
+ if (cxl_present) {
+ build_acpi0017(scope);
+ }
}
static void acpi_dsdt_add_gpio(Aml *scope, const MemMapEntry *gpio_memmap,
@@ -992,6 +1021,11 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
}
}
+ if (vms->cxl_devices_state.is_enabled) {
+ cxl_build_cedt(table_offsets, tables_blob, tables->linker,
+ vms->oem_id, vms->oem_table_id, &vms->cxl_devices_state);
+ }
+
if (ms->nvdimms_state->is_enabled) {
nvdimm_build_acpi(table_offsets, tables_blob, tables->linker,
ms->nvdimms_state, ms->ram_slots, vms->oem_id,
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 097238faa7..a8a2d79f19 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -55,6 +55,7 @@
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "hw/pci-host/gpex.h"
+#include "hw/pci-bridge/pci_expander_bridge.h"
#include "hw/virtio/virtio-pci.h"
#include "hw/core/sysbus-fdt.h"
#include "hw/platform-bus.h"
@@ -78,6 +79,8 @@
#include "hw/virtio/virtio-mem-pci.h"
#include "hw/virtio/virtio-iommu.h"
#include "hw/char/pl011.h"
+#include "hw/cxl/cxl.h"
+#include "hw/cxl/cxl_host.h"
#include "qemu/guest-random.h"
#define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
@@ -178,6 +181,7 @@ static const MemMapEntry base_memmap[] = {
static MemMapEntry extended_memmap[] = {
/* Additional 64 MB redist region (can contain up to 512 redistributors) */
[VIRT_HIGH_GIC_REDIST2] = { 0x0, 64 * MiB },
+ [VIRT_CXL_HOST] = { 0x0, 64 * KiB * 16 }, /* 16 UID */
[VIRT_HIGH_PCIE_ECAM] = { 0x0, 256 * MiB },
/* Second PCIe window */
[VIRT_HIGH_PCIE_MMIO] = { 0x0, 512 * GiB },
@@ -1525,6 +1529,16 @@ static void create_pcie(VirtMachineState *vms)
}
}
+static void create_cxl_host_reg_region(VirtMachineState *vms)
+{
+ MemoryRegion *sysmem = get_system_memory();
+ MemoryRegion *mr = &vms->cxl_devices_state.host_mr;
+
+ memory_region_init(mr, OBJECT(vms), "cxl_host_reg",
+ vms->memmap[VIRT_CXL_HOST].size);
+ memory_region_add_subregion(sysmem, vms->memmap[VIRT_CXL_HOST].base, mr);
+}
+
static void create_platform_bus(VirtMachineState *vms)
{
DeviceState *dev;
@@ -1638,6 +1652,12 @@ void virt_machine_done(Notifier *notifier, void *data)
struct arm_boot_info *info = &vms->bootinfo;
AddressSpace *as = arm_boot_address_space(cpu, info);
+ cxl_hook_up_pxb_registers(vms->bus, &vms->cxl_devices_state,
+ &error_fatal);
+
+ if (vms->cxl_devices_state.is_enabled) {
+ cxl_fmws_link_targets(&vms->cxl_devices_state, &error_fatal);
+ }
/*
* If the user provided a dtb, we assume the dynamic sysbus nodes
* already are integrated there. This corresponds to a use case where
@@ -1779,6 +1799,20 @@ static void virt_set_memmap(VirtMachineState *vms, int pa_bits)
memory_region_init(&ms->device_memory->mr, OBJECT(vms),
"device-memory", device_memory_size);
}
+
+ if (vms->cxl_devices_state.fixed_windows) {
+ GList *it;
+
+ base = ROUND_UP(base, 256 * MiB);
+ for (it = vms->cxl_devices_state.fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+
+ fw->base = base;
+ memory_region_init_io(&fw->mr, OBJECT(vms), &cfmws_ops, fw,
+ "cxl-fixed-memory-region", fw->size);
+ base += fw->size;
+ }
+ }
}
/*
@@ -2215,6 +2249,14 @@ static void machvirt_init(MachineState *machine)
memory_region_add_subregion(sysmem, machine->device_memory->base,
&machine->device_memory->mr);
}
+ if (vms->cxl_devices_state.fixed_windows) {
+ GList *it;
+ for (it = vms->cxl_devices_state.fixed_windows; it; it = it->next) {
+ CXLFixedWindow *fw = it->data;
+
+ memory_region_add_subregion(sysmem, fw->base, &fw->mr);
+ }
+ }
virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
@@ -2241,6 +2283,7 @@ static void machvirt_init(MachineState *machine)
create_rtc(vms);
create_pcie(vms);
+ create_cxl_host_reg_region(vms);
if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) {
vms->acpi_dev = create_acpi_ged(vms);
@@ -3070,6 +3113,7 @@ static void virt_instance_init(Object *obj)
vms->oem_id = g_strndup(ACPI_BUILD_APPNAME6, 6);
vms->oem_table_id = g_strndup(ACPI_BUILD_APPNAME8, 8);
+ cxl_machine_init(obj, &vms->cxl_devices_state);
}
static const TypeInfo virt_machine_info = {
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index 15feabac63..403c9107e5 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -35,6 +35,7 @@
#include "hw/boards.h"
#include "hw/arm/boot.h"
#include "hw/block/flash.h"
+#include "hw/cxl/cxl.h"
#include "sysemu/kvm.h"
#include "hw/intc/arm_gicv3_common.h"
#include "qom/object.h"
@@ -92,6 +93,7 @@ enum {
/* indices of IO regions located after the RAM */
enum {
VIRT_HIGH_GIC_REDIST2 = VIRT_LOWMEMMAP_LAST,
+ VIRT_CXL_HOST,
VIRT_HIGH_PCIE_ECAM,
VIRT_HIGH_PCIE_MMIO,
};
@@ -176,6 +178,7 @@ struct VirtMachineState {
PCIBus *bus;
char *oem_id;
char *oem_table_id;
+ CXLState cxl_devices_state;
};
#define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)
--
2.32.0
next prev parent reply other threads:[~2022-06-16 14:22 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-16 14:19 [PATCH v11 0/2] arm/virt: CXL support via pxb_cxl Jonathan Cameron via
2022-06-16 14:19 ` Jonathan Cameron via [this message]
2022-06-24 10:48 ` [PATCH v11 1/2] hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances pxb-cxl Peter Maydell
2022-06-24 12:39 ` Jonathan Cameron via
2022-06-24 12:56 ` Peter Maydell
2022-06-24 14:08 ` Jonathan Cameron via
2022-06-24 14:54 ` Jonathan Cameron via
2022-06-24 15:01 ` Peter Maydell
2022-06-24 15:59 ` Jonathan Cameron via
2022-06-16 14:19 ` [PATCH v11 2/2] qtest/cxl: Add aarch64 virt test for CXL Jonathan Cameron via
2022-06-24 10:41 ` Peter Maydell
2022-06-24 16:12 ` Peter Maydell
2022-06-24 17:59 ` Jonathan Cameron via
2022-06-24 9:07 ` [PATCH v11 0/2] arm/virt: CXL support via pxb_cxl Jonathan Cameron via
-- strict thread matches above, loose matches on Subject: below --
2022-05-20 16:37 [PATCH v11 0/2] hw/arm/virt: CXL 2.0 emulation support Jonathan Cameron via
2022-05-20 16:37 ` [PATCH v11 1/2] hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances pxb-cxl Jonathan Cameron via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220616141950.23374-2-Jonathan.Cameron@huawei.com \
--to=qemu-devel@nongnu.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=a.manzanares@samsung.com \
--cc=alex.bennee@linaro.org \
--cc=armbru@redhat.com \
--cc=bwidawsk@kernel.org \
--cc=imammedo@redhat.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=marcel@redhat.com \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=ztong0001@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).