From: Daniel Henrique Barboza <danielhb413@gmail.com>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, danielhb413@gmail.com,
peter.maydell@linaro.org, richard.henderson@linaro.org,
Alexey Kardashevskiy <aik@ozlabs.ru>
Subject: [PULL 10/34] spapr/ddw: Reset DMA when the last non-default window is removed
Date: Wed, 6 Jul 2022 17:09:22 -0300 [thread overview]
Message-ID: <20220706200946.471114-11-danielhb413@gmail.com> (raw)
In-Reply-To: <20220706200946.471114-1-danielhb413@gmail.com>
From: Alexey Kardashevskiy <aik@ozlabs.ru>
PAPR+/LoPAPR says:
===
The platform must restore the default DMA window for the PE on a call
to the ibm,remove-pe-dma-window RTAS call when all of the following
are true:
a. The call removes the last DMA window remaining for the PE.
b. The DMA window being removed is not the default window
===
This resets DMA as PAPR mandates.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220622052955.1069903-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
hw/ppc/spapr_iommu.c | 3 ++-
hw/ppc/spapr_pci.c | 1 +
hw/ppc/spapr_rtas_ddw.c | 15 +++++++++++++++
include/hw/ppc/spapr.h | 1 +
4 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/hw/ppc/spapr_iommu.c b/hw/ppc/spapr_iommu.c
index 81e5a1aea3..63e34d457a 100644
--- a/hw/ppc/spapr_iommu.c
+++ b/hw/ppc/spapr_iommu.c
@@ -279,7 +279,7 @@ static const VMStateDescription vmstate_spapr_tce_table_ex = {
static const VMStateDescription vmstate_spapr_tce_table = {
.name = "spapr_iommu",
- .version_id = 2,
+ .version_id = 3,
.minimum_version_id = 2,
.pre_save = spapr_tce_table_pre_save,
.post_load = spapr_tce_table_post_load,
@@ -292,6 +292,7 @@ static const VMStateDescription vmstate_spapr_tce_table = {
VMSTATE_BOOL(bypass, SpaprTceTable),
VMSTATE_VARRAY_UINT32_ALLOC(mig_table, SpaprTceTable, mig_nb_table, 0,
vmstate_info_uint64, uint64_t),
+ VMSTATE_BOOL_V(def_win, SpaprTceTable, 3),
VMSTATE_END_OF_LIST()
},
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index b2f5fbef0c..5e95d7940f 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -2067,6 +2067,7 @@ void spapr_phb_dma_reset(SpaprPhbState *sphb)
tcet = spapr_tce_find_by_liobn(sphb->dma_liobn[0]);
spapr_tce_table_enable(tcet, SPAPR_TCE_PAGE_SHIFT, sphb->dma_win_addr,
sphb->dma_win_size >> SPAPR_TCE_PAGE_SHIFT);
+ tcet->def_win = true;
}
static void spapr_phb_reset(DeviceState *qdev)
diff --git a/hw/ppc/spapr_rtas_ddw.c b/hw/ppc/spapr_rtas_ddw.c
index 13d339c807..bb7d91b6d1 100644
--- a/hw/ppc/spapr_rtas_ddw.c
+++ b/hw/ppc/spapr_rtas_ddw.c
@@ -215,6 +215,7 @@ static void rtas_ibm_remove_pe_dma_window(PowerPCCPU *cpu,
SpaprPhbState *sphb;
SpaprTceTable *tcet;
uint32_t liobn;
+ bool def_win_removed;
if ((nargs != 1) || (nret != 1)) {
goto param_error_exit;
@@ -231,9 +232,23 @@ static void rtas_ibm_remove_pe_dma_window(PowerPCCPU *cpu,
goto param_error_exit;
}
+ def_win_removed = tcet->def_win;
spapr_tce_table_disable(tcet);
trace_spapr_iommu_ddw_remove(liobn);
+ /*
+ * PAPR+/LoPAPR says:
+ * The platform must restore the default DMA window for the PE on a call
+ * to the ibm,remove-pe-dma-window RTAS call when all of the following
+ * are true:
+ * a. The call removes the last DMA window remaining for the PE.
+ * b. The DMA window being removed is not the default window
+ */
+ if (spapr_phb_get_active_win_num(sphb) == 0 && !def_win_removed) {
+ spapr_phb_dma_reset(sphb);
+ trace_spapr_iommu_ddw_reset(sphb->buid, 0);
+ }
+
rtas_st(rets, 0, RTAS_OUT_SUCCESS);
return;
diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
index 072dda2c72..4ba2b27b8c 100644
--- a/include/hw/ppc/spapr.h
+++ b/include/hw/ppc/spapr.h
@@ -902,6 +902,7 @@ struct SpaprTceTable {
bool bypass;
bool need_vfio;
bool skipping_replay;
+ bool def_win;
int fd;
MemoryRegion root;
IOMMUMemoryRegion iommu;
--
2.36.1
next prev parent reply other threads:[~2022-07-06 20:53 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-06 20:09 [PULL 00/34] ppc queue Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 01/34] ppc/pnv: move root port attach to pnv_phb4_realize() Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 02/34] ppc/pnv: attach phb3/phb4 root ports in QOM tree Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 03/34] ppc/pnv: assign pnv-phb-root-port chassis/slot earlier Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 04/34] ppc/pnv: make pnv_ics_get() use the chip8->phbs[] array Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 05/34] ppc/pnv: make pnv_ics_resend() use chip8->phbs[] Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 06/34] ppc/pnv: make pnv_chip_power8_pic_print_info() " Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 07/34] ppc/pnv: remove 'INTERFACE_PCIE_DEVICE' from phb3 root bus Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 08/34] ppc/pnv: remove 'INTERFACE_PCIE_DEVICE' from phb4 " Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 09/34] target/ppc: Change FPSCR_* to follow POWER ISA numbering convention Daniel Henrique Barboza
2022-07-06 20:09 ` Daniel Henrique Barboza [this message]
2022-07-06 20:09 ` [PULL 11/34] spapr/ddw: Implement 64bit query extension Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 12/34] target/ppc: use int128.h methods in vpmsumd Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 13/34] target/ppc: use int128.h methods in vadduqm Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 14/34] target/ppc: use int128.h methods in vaddecuq and vaddeuqm Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 15/34] target/ppc: use int128.h methods in vaddcuq Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 16/34] target/ppc: use int128.h methods in vsubuqm Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 17/34] target/ppc: use int128.h methods in vsubecuq and vsubeuqm Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 18/34] target/ppc: use int128.h methods in vsubcuq Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 19/34] ppc: Define SETFIELD for the ppc target Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 20/34] ppc/spapr: Implement H_WATCHDOG Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 21/34] target/ppc: Fix insn32.decode style issues Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 22/34] target/ppc: Move mffscrn[i] to decodetree Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 23/34] target/ppc: Move mffsce " Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 24/34] target/ppc: Move mffsl " Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 25/34] target/ppc: Move mffs[.] " Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 26/34] target/ppc: Implement mffscdrn[i] instructions Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 27/34] tests/tcg/ppc64: Add mffsce test Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 28/34] target/ppc: Add flag for ISA v2.06 BCDA instructions Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 29/34] target/ppc: implement addg6s Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 30/34] target/ppc: implement cbcdtd Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 31/34] target/ppc: implement cdtbcd Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 32/34] target/ppc: Return default CPU for max CPU Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 33/34] target/ppc/cpu-models: Remove the "default" CPU alias Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 34/34] target/ppc: Fix MPC8555 and MPC8560 core type to e500v1 Daniel Henrique Barboza
2022-07-07 2:24 ` [PULL 00/34] ppc queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220706200946.471114-11-danielhb413@gmail.com \
--to=danielhb413@gmail.com \
--cc=aik@ozlabs.ru \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).