From: Daniel Henrique Barboza <danielhb413@gmail.com>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, danielhb413@gmail.com,
peter.maydell@linaro.org, richard.henderson@linaro.org,
"Frederic Barrat" <fbarrat@linux.ibm.com>,
"Cédric Le Goater" <clg@kaod.org>
Subject: [PULL 02/34] ppc/pnv: attach phb3/phb4 root ports in QOM tree
Date: Wed, 6 Jul 2022 17:09:14 -0300 [thread overview]
Message-ID: <20220706200946.471114-3-danielhb413@gmail.com> (raw)
In-Reply-To: <20220706200946.471114-1-danielhb413@gmail.com>
At this moment we leave the pnv-phb3(4)-root-port unattached in QOM:
/unattached (container)
(...)
/device[2] (pnv-phb3-root-port)
/bus master container[0] (memory-region)
/bus master[0] (memory-region)
/pci_bridge_io[0] (memory-region)
/pci_bridge_io[1] (memory-region)
/pci_bridge_mem[0] (memory-region)
/pci_bridge_pci[0] (memory-region)
/pci_bridge_pref_mem[0] (memory-region)
/pci_bridge_vga_io_hi[0] (memory-region)
/pci_bridge_vga_io_lo[0] (memory-region)
/pci_bridge_vga_mem[0] (memory-region)
/pcie.0 (PCIE)
Let's make changes in pnv_phb_attach_root_port() to attach the created
root ports to its corresponding PHB.
This is the result afterwards:
/pnv-phb3[0] (pnv-phb3)
/lsi (ics)
/msi (phb3-msi)
/msi32[0] (memory-region)
/msi64[0] (memory-region)
/pbcq (pnv-pbcq)
(...)
/phb3_iommu[0] (pnv-phb3-iommu-memory-region)
/pnv-phb3-root.0 (pnv-phb3-root)
/pnv-phb3-root-port[0] (pnv-phb3-root-port)
/bus master container[0] (memory-region)
/bus master[0] (memory-region)
/pci_bridge_io[0] (memory-region)
/pci_bridge_io[1] (memory-region)
/pci_bridge_mem[0] (memory-region)
/pci_bridge_pci[0] (memory-region)
/pci_bridge_pref_mem[0] (memory-region)
/pci_bridge_vga_io_hi[0] (memory-region)
/pci_bridge_vga_io_lo[0] (memory-region)
/pci_bridge_vga_mem[0] (memory-region)
/pcie.0 (PCIE)
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220621173436.165912-3-danielhb413@gmail.com>
---
hw/pci-host/pnv_phb3.c | 2 +-
hw/pci-host/pnv_phb4.c | 2 +-
hw/ppc/pnv.c | 7 ++++++-
include/hw/ppc/pnv.h | 2 +-
4 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/hw/pci-host/pnv_phb3.c b/hw/pci-host/pnv_phb3.c
index 26ac9b7123..4ba660f8b9 100644
--- a/hw/pci-host/pnv_phb3.c
+++ b/hw/pci-host/pnv_phb3.c
@@ -1052,7 +1052,7 @@ static void pnv_phb3_realize(DeviceState *dev, Error **errp)
pci_setup_iommu(pci->bus, pnv_phb3_dma_iommu, phb);
- pnv_phb_attach_root_port(PCI_HOST_BRIDGE(phb), TYPE_PNV_PHB3_ROOT_PORT);
+ pnv_phb_attach_root_port(pci, TYPE_PNV_PHB3_ROOT_PORT, phb->phb_id);
}
void pnv_phb3_update_regions(PnvPHB3 *phb)
diff --git a/hw/pci-host/pnv_phb4.c b/hw/pci-host/pnv_phb4.c
index 23ad8de7ee..ffd9d8a947 100644
--- a/hw/pci-host/pnv_phb4.c
+++ b/hw/pci-host/pnv_phb4.c
@@ -1585,7 +1585,7 @@ static void pnv_phb4_realize(DeviceState *dev, Error **errp)
pci->bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE;
/* Add a single Root port if running with defaults */
- pnv_phb_attach_root_port(pci, pecc->rp_model);
+ pnv_phb_attach_root_port(pci, pecc->rp_model, phb->phb_id);
/* Setup XIVE Source */
if (phb->big_phb) {
diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
index 7c08a78d6c..40e0cbd84d 100644
--- a/hw/ppc/pnv.c
+++ b/hw/ppc/pnv.c
@@ -1190,9 +1190,14 @@ static void pnv_chip_icp_realize(Pnv8Chip *chip8, Error **errp)
}
/* Attach a root port device */
-void pnv_phb_attach_root_port(PCIHostState *pci, const char *name)
+void pnv_phb_attach_root_port(PCIHostState *pci, const char *name, int index)
{
PCIDevice *root = pci_new(PCI_DEVFN(0, 0), name);
+ g_autofree char *default_id = g_strdup_printf("%s[%d]", name, index);
+ const char *dev_id = DEVICE(root)->id;
+
+ object_property_add_child(OBJECT(pci->bus), dev_id ? dev_id : default_id,
+ OBJECT(root));
pci_realize_and_unref(root, pci->bus, &error_fatal);
}
diff --git a/include/hw/ppc/pnv.h b/include/hw/ppc/pnv.h
index 86cb7d7f97..033890a23f 100644
--- a/include/hw/ppc/pnv.h
+++ b/include/hw/ppc/pnv.h
@@ -189,7 +189,7 @@ DECLARE_INSTANCE_CHECKER(PnvChip, PNV_CHIP_POWER10,
TYPE_PNV_CHIP_POWER10)
PowerPCCPU *pnv_chip_find_cpu(PnvChip *chip, uint32_t pir);
-void pnv_phb_attach_root_port(PCIHostState *pci, const char *name);
+void pnv_phb_attach_root_port(PCIHostState *pci, const char *name, int index);
#define TYPE_PNV_MACHINE MACHINE_TYPE_NAME("powernv")
typedef struct PnvMachineClass PnvMachineClass;
--
2.36.1
next prev parent reply other threads:[~2022-07-06 20:15 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-06 20:09 [PULL 00/34] ppc queue Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 01/34] ppc/pnv: move root port attach to pnv_phb4_realize() Daniel Henrique Barboza
2022-07-06 20:09 ` Daniel Henrique Barboza [this message]
2022-07-06 20:09 ` [PULL 03/34] ppc/pnv: assign pnv-phb-root-port chassis/slot earlier Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 04/34] ppc/pnv: make pnv_ics_get() use the chip8->phbs[] array Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 05/34] ppc/pnv: make pnv_ics_resend() use chip8->phbs[] Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 06/34] ppc/pnv: make pnv_chip_power8_pic_print_info() " Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 07/34] ppc/pnv: remove 'INTERFACE_PCIE_DEVICE' from phb3 root bus Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 08/34] ppc/pnv: remove 'INTERFACE_PCIE_DEVICE' from phb4 " Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 09/34] target/ppc: Change FPSCR_* to follow POWER ISA numbering convention Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 10/34] spapr/ddw: Reset DMA when the last non-default window is removed Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 11/34] spapr/ddw: Implement 64bit query extension Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 12/34] target/ppc: use int128.h methods in vpmsumd Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 13/34] target/ppc: use int128.h methods in vadduqm Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 14/34] target/ppc: use int128.h methods in vaddecuq and vaddeuqm Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 15/34] target/ppc: use int128.h methods in vaddcuq Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 16/34] target/ppc: use int128.h methods in vsubuqm Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 17/34] target/ppc: use int128.h methods in vsubecuq and vsubeuqm Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 18/34] target/ppc: use int128.h methods in vsubcuq Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 19/34] ppc: Define SETFIELD for the ppc target Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 20/34] ppc/spapr: Implement H_WATCHDOG Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 21/34] target/ppc: Fix insn32.decode style issues Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 22/34] target/ppc: Move mffscrn[i] to decodetree Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 23/34] target/ppc: Move mffsce " Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 24/34] target/ppc: Move mffsl " Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 25/34] target/ppc: Move mffs[.] " Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 26/34] target/ppc: Implement mffscdrn[i] instructions Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 27/34] tests/tcg/ppc64: Add mffsce test Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 28/34] target/ppc: Add flag for ISA v2.06 BCDA instructions Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 29/34] target/ppc: implement addg6s Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 30/34] target/ppc: implement cbcdtd Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 31/34] target/ppc: implement cdtbcd Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 32/34] target/ppc: Return default CPU for max CPU Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 33/34] target/ppc/cpu-models: Remove the "default" CPU alias Daniel Henrique Barboza
2022-07-06 20:09 ` [PULL 34/34] target/ppc: Fix MPC8555 and MPC8560 core type to e500v1 Daniel Henrique Barboza
2022-07-07 2:24 ` [PULL 00/34] ppc queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220706200946.471114-3-danielhb413@gmail.com \
--to=danielhb413@gmail.com \
--cc=clg@kaod.org \
--cc=fbarrat@linux.ibm.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).