qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Subject: [RISU PATCH v4 00/29] risu cleanups and improvements
Date: Fri,  8 Jul 2022 21:16:31 +0530	[thread overview]
Message-ID: <20220708154700.18682-1-richard.henderson@linaro.org> (raw)

If you can imagine, v3 was back in 2020:
https://lore.kernel.org/qemu-devel/20200522023440.26261-1-richard.henderson@linaro.org/

I've refreshed that, not that risu has changed much in that time,
and then also added support for SME to aarch64, i.e. SVCR and ZA
storage are now present in the reginfo, and compared.

I include a small test case, which allows one to see that ZA
storage is being handled properly.  When run with

  ./risu --test-sve=1 --test-za=1 --master -t test_sme_aarch64.{out,bin}
  ./risu --fulldump -t test_sme_aarch64.out

one can see the 16x16 bytes filled with row major then
column major indexes.


r~


Richard Henderson (29):
  Use bool for tracing variables
  Unify master_fd and apprentice_fd to comm_fd
  Hoist trace file and socket opening
  Adjust tracefile open for write
  Use EXIT_FAILURE, EXIT_SUCCESS
  Make some risu.c symbols static
  Add enum RisuOp
  Add enum RisuResult
  Unify i/o functions and use RisuResult
  Pass non-OK result back through siglongjmp
  Always write for --master
  Simplify syncing with master
  Split RES_MISMATCH for registers and memory
  Merge reginfo.c into risu.c
  Rearrange reginfo and memblock buffers
  Split out recv_register_info
  Add magic and size to the trace header
  Compute reginfo_size based on the reginfo
  aarch64: Assume system support for SVE
  aarch64: Reorg sve reginfo to save space
  aarch64: Use arch_init to configure sve
  ppc64: Use uint64_t to represent double
  Standardize reginfo_dump_mismatch printing
  Add --fulldump and --diffdup options
  Remove return value from reginfo_dump
  ppc64: Clean up reginfo handling
  aarch64: Tidy reginfo dumping ahead of ZA state
  aarch64: Add support for ZA storage
  aarch64: Trivial SME test

 Makefile               |   2 +-
 risu.h                 | 103 +++----
 risu_reginfo_aarch64.h |  97 ++++--
 risu_reginfo_ppc64.h   |   3 +-
 comms.c                |  34 +--
 reginfo.c              | 183 -----------
 risu.c                 | 676 ++++++++++++++++++++++++++++++-----------
 risu_aarch64.c         |   6 +-
 risu_arm.c             |   6 +-
 risu_i386.c            |   4 +-
 risu_m68k.c            |   4 +-
 risu_ppc64.c           |   4 +-
 risu_reginfo_aarch64.c | 408 +++++++++++++++----------
 risu_reginfo_arm.c     |  32 +-
 risu_reginfo_i386.c    |  22 +-
 risu_reginfo_m68k.c    |  37 +--
 risu_reginfo_ppc64.c   | 183 +++++------
 test_sme_aarch64.s     |  55 ++++
 18 files changed, 1070 insertions(+), 789 deletions(-)
 delete mode 100644 reginfo.c
 create mode 100644 test_sme_aarch64.s

-- 
2.34.1



             reply	other threads:[~2022-07-08 15:48 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-08 15:46 Richard Henderson [this message]
2022-07-08 15:46 ` [RISU PATCH v4 01/29] Use bool for tracing variables Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 02/29] Unify master_fd and apprentice_fd to comm_fd Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 03/29] Hoist trace file and socket opening Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 04/29] Adjust tracefile open for write Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 05/29] Use EXIT_FAILURE, EXIT_SUCCESS Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 06/29] Make some risu.c symbols static Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 07/29] Add enum RisuOp Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 08/29] Add enum RisuResult Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 09/29] Unify i/o functions and use RisuResult Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 10/29] Pass non-OK result back through siglongjmp Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 11/29] Always write for --master Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 12/29] Simplify syncing with master Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 13/29] Split RES_MISMATCH for registers and memory Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 14/29] Merge reginfo.c into risu.c Richard Henderson
2022-07-18 10:46   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 15/29] Rearrange reginfo and memblock buffers Richard Henderson
2022-07-18 10:46   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 16/29] Split out recv_register_info Richard Henderson
2022-07-18 10:48   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 17/29] Add magic and size to the trace header Richard Henderson
2022-07-18 10:51   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 18/29] Compute reginfo_size based on the reginfo Richard Henderson
2022-07-18 11:37   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 19/29] aarch64: Assume system support for SVE Richard Henderson
2022-07-18 11:38   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 20/29] aarch64: Reorg sve reginfo to save space Richard Henderson
2022-07-18 11:40   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 21/29] aarch64: Use arch_init to configure sve Richard Henderson
2022-07-18 11:44   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 22/29] ppc64: Use uint64_t to represent double Richard Henderson
2022-07-12 11:17   ` Matheus K. Ferst
2022-07-08 15:46 ` [RISU PATCH v4 23/29] Standardize reginfo_dump_mismatch printing Richard Henderson
2022-07-18 11:54   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 24/29] Add --fulldump and --diffdup options Richard Henderson
2022-07-18 12:06   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 25/29] Remove return value from reginfo_dump Richard Henderson
2022-07-18 11:55   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 26/29] ppc64: Clean up reginfo handling Richard Henderson
2022-07-12 11:17   ` Matheus K. Ferst
2022-07-08 15:46 ` [RISU PATCH v4 27/29] aarch64: Tidy reginfo dumping ahead of ZA state Richard Henderson
2022-07-18 12:08   ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 28/29] aarch64: Add support for ZA storage Richard Henderson
2022-07-18 12:09   ` Peter Maydell
2022-07-08 15:47 ` [RISU PATCH v4 29/29] aarch64: Trivial SME test Richard Henderson
2022-07-18 12:11   ` Peter Maydell
2022-07-18 12:19 ` [RISU PATCH v4 00/29] risu cleanups and improvements Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220708154700.18682-1-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).