From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org, "Alex Bennée" <alex.bennee@linaro.org>
Subject: [RISU PATCH v4 13/29] Split RES_MISMATCH for registers and memory
Date: Fri, 8 Jul 2022 21:16:44 +0530 [thread overview]
Message-ID: <20220708154700.18682-14-richard.henderson@linaro.org> (raw)
In-Reply-To: <20220708154700.18682-1-richard.henderson@linaro.org>
By remembering the specific comparison that failed, we do not
have to try again when it comes time to report. This makes
the mem_used flag redundant. Also, packet_mismatch is now
redundant with RES_BAD_IO.
This means that the only thing that report_match_status does
is to report on register status, so rename to report_mismatch_reg.
Also, we know there is a failure, so don't return a status from
the report.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
risu.h | 13 ++++++-------
reginfo.c | 45 ++++++++-------------------------------------
risu.c | 10 +++++++---
3 files changed, 21 insertions(+), 47 deletions(-)
diff --git a/risu.h b/risu.h
index f383b64..77d6128 100644
--- a/risu.h
+++ b/risu.h
@@ -54,7 +54,8 @@ typedef enum {
typedef enum {
RES_OK = 0,
RES_END,
- RES_MISMATCH,
+ RES_MISMATCH_REG,
+ RES_MISMATCH_MEM,
RES_BAD_IO,
} RisuResult;
@@ -100,13 +101,11 @@ RisuResult send_register_info(void *uc);
*/
RisuResult recv_and_compare_register_info(void *uc);
-/* Print a useful report on the status of the last comparison
- * done in recv_and_compare_register_info(). This is called on
- * exit, so need not restrict itself to signal-safe functions.
- * Should return 0 if it was a good match (ie end of test)
- * and 1 for a mismatch.
+/*
+ * Print a useful report on the status of the last reg comparison
+ * done in recv_and_compare_register_info().
*/
-int report_match_status(void);
+void report_mismatch_reg(void);
/* Interface provided by CPU-specific code: */
diff --git a/reginfo.c b/reginfo.c
index 31bc699..a007f16 100644
--- a/reginfo.c
+++ b/reginfo.c
@@ -17,9 +17,6 @@
static struct reginfo master_ri, apprentice_ri;
static uint8_t master_memblock[MEMBLOCKLEN];
-static int mem_used;
-static int packet_mismatch;
-
RisuResult send_register_info(void *uc)
{
struct reginfo ri;
@@ -107,10 +104,10 @@ RisuResult recv_and_compare_register_info(void *uc)
*/
res = read_buffer(&master_ri, reginfo_size());
if (res != RES_OK) {
- packet_mismatch = 1;
+ /* fail */
} else if (!reginfo_is_eq(&master_ri, &apprentice_ri)) {
/* register mismatch */
- res = RES_MISMATCH;
+ res = RES_MISMATCH_REG;
} else if (op == OP_TESTEND) {
res = RES_END;
}
@@ -124,13 +121,12 @@ RisuResult recv_and_compare_register_info(void *uc)
(uintptr_t)memblock);
break;
case OP_COMPAREMEM:
- mem_used = 1;
res = read_buffer(master_memblock, MEMBLOCKLEN);
if (res != RES_OK) {
- packet_mismatch = 1;
+ /* fail */
} else if (memcmp(memblock, master_memblock, MEMBLOCKLEN) != 0) {
/* memory mismatch */
- res = RES_MISMATCH;
+ res = RES_MISMATCH_MEM;
}
respond(res == RES_OK ? RES_OK : RES_END);
break;
@@ -141,40 +137,15 @@ RisuResult recv_and_compare_register_info(void *uc)
return res;
}
-/* Print a useful report on the status of the last comparison
- * done in recv_and_compare_register_info(). This is called on
- * exit, so need not restrict itself to signal-safe functions.
- * Should return 0 if it was a good match (ie end of test)
- * and 1 for a mismatch.
+/*
+ * Print a useful report on the status of the last reg comparison
+ * done in recv_and_compare_register_info().
*/
-int report_match_status(void)
+void report_mismatch_reg(void)
{
- int resp = 0;
- fprintf(stderr, "match status...\n");
- if (packet_mismatch) {
- fprintf(stderr, "packet mismatch (probably disagreement "
- "about UNDEF on load/store)\n");
- return 1;
- }
- if (!reginfo_is_eq(&master_ri, &apprentice_ri)) {
- fprintf(stderr, "mismatch on regs!\n");
- resp = 1;
- }
- if (mem_used
- && memcmp(memblock, &master_memblock, MEMBLOCKLEN) != 0) {
- fprintf(stderr, "mismatch on memory!\n");
- resp = 1;
- }
- if (!resp) {
- fprintf(stderr, "match!\n");
- return 0;
- }
-
fprintf(stderr, "master reginfo:\n");
reginfo_dump(&master_ri, stderr);
fprintf(stderr, "apprentice reginfo:\n");
reginfo_dump(&apprentice_ri, stderr);
-
reginfo_dump_mismatch(&master_ri, &apprentice_ri, stderr);
- return resp;
}
diff --git a/risu.c b/risu.c
index 199f697..d6c2deb 100644
--- a/risu.c
+++ b/risu.c
@@ -224,9 +224,13 @@ static int apprentice(void)
case RES_END:
return EXIT_SUCCESS;
- case RES_MISMATCH:
- fprintf(stderr, "mismatch after %zd checkpoints\n", signal_count);
- report_match_status();
+ case RES_MISMATCH_REG:
+ fprintf(stderr, "mismatch reg after %zd checkpoints\n", signal_count);
+ report_mismatch_reg();
+ return EXIT_FAILURE;
+
+ case RES_MISMATCH_MEM:
+ fprintf(stderr, "mismatch mem after %zd checkpoints\n", signal_count);
return EXIT_FAILURE;
case RES_BAD_IO:
--
2.34.1
next prev parent reply other threads:[~2022-07-08 16:33 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-08 15:46 [RISU PATCH v4 00/29] risu cleanups and improvements Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 01/29] Use bool for tracing variables Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 02/29] Unify master_fd and apprentice_fd to comm_fd Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 03/29] Hoist trace file and socket opening Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 04/29] Adjust tracefile open for write Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 05/29] Use EXIT_FAILURE, EXIT_SUCCESS Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 06/29] Make some risu.c symbols static Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 07/29] Add enum RisuOp Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 08/29] Add enum RisuResult Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 09/29] Unify i/o functions and use RisuResult Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 10/29] Pass non-OK result back through siglongjmp Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 11/29] Always write for --master Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 12/29] Simplify syncing with master Richard Henderson
2022-07-08 15:46 ` Richard Henderson [this message]
2022-07-08 15:46 ` [RISU PATCH v4 14/29] Merge reginfo.c into risu.c Richard Henderson
2022-07-18 10:46 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 15/29] Rearrange reginfo and memblock buffers Richard Henderson
2022-07-18 10:46 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 16/29] Split out recv_register_info Richard Henderson
2022-07-18 10:48 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 17/29] Add magic and size to the trace header Richard Henderson
2022-07-18 10:51 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 18/29] Compute reginfo_size based on the reginfo Richard Henderson
2022-07-18 11:37 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 19/29] aarch64: Assume system support for SVE Richard Henderson
2022-07-18 11:38 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 20/29] aarch64: Reorg sve reginfo to save space Richard Henderson
2022-07-18 11:40 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 21/29] aarch64: Use arch_init to configure sve Richard Henderson
2022-07-18 11:44 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 22/29] ppc64: Use uint64_t to represent double Richard Henderson
2022-07-12 11:17 ` Matheus K. Ferst
2022-07-08 15:46 ` [RISU PATCH v4 23/29] Standardize reginfo_dump_mismatch printing Richard Henderson
2022-07-18 11:54 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 24/29] Add --fulldump and --diffdup options Richard Henderson
2022-07-18 12:06 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 25/29] Remove return value from reginfo_dump Richard Henderson
2022-07-18 11:55 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 26/29] ppc64: Clean up reginfo handling Richard Henderson
2022-07-12 11:17 ` Matheus K. Ferst
2022-07-08 15:46 ` [RISU PATCH v4 27/29] aarch64: Tidy reginfo dumping ahead of ZA state Richard Henderson
2022-07-18 12:08 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 28/29] aarch64: Add support for ZA storage Richard Henderson
2022-07-18 12:09 ` Peter Maydell
2022-07-08 15:47 ` [RISU PATCH v4 29/29] aarch64: Trivial SME test Richard Henderson
2022-07-18 12:11 ` Peter Maydell
2022-07-18 12:19 ` [RISU PATCH v4 00/29] risu cleanups and improvements Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220708154700.18682-14-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).