From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org, "Alex Bennée" <alex.bennee@linaro.org>,
"Peter Maydell" <peter.maydell@linaro.org>
Subject: [RISU PATCH v4 02/29] Unify master_fd and apprentice_fd to comm_fd
Date: Fri, 8 Jul 2022 21:16:33 +0530 [thread overview]
Message-ID: <20220708154700.18682-3-richard.henderson@linaro.org> (raw)
In-Reply-To: <20220708154700.18682-1-richard.henderson@linaro.org>
Any one invocation cannot be both master and apprentice.
Let's use only one variable for the file descriptor.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
risu.c | 40 ++++++++++++++++++++--------------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/risu.c b/risu.c
index 79b1092..059348f 100644
--- a/risu.c
+++ b/risu.c
@@ -30,7 +30,7 @@
void *memblock;
-int apprentice_fd, master_fd;
+static int comm_fd;
bool trace;
size_t signal_count;
@@ -50,7 +50,7 @@ sigjmp_buf jmpbuf;
int read_sock(void *ptr, size_t bytes)
{
- return recv_data_pkt(master_fd, ptr, bytes);
+ return recv_data_pkt(comm_fd, ptr, bytes);
}
int write_trace(void *ptr, size_t bytes)
@@ -58,9 +58,9 @@ int write_trace(void *ptr, size_t bytes)
size_t res;
#ifdef HAVE_ZLIB
- if (master_fd == STDOUT_FILENO) {
+ if (comm_fd == STDOUT_FILENO) {
#endif
- res = write(master_fd, ptr, bytes);
+ res = write(comm_fd, ptr, bytes);
#ifdef HAVE_ZLIB
} else {
res = gzwrite(gz_trace_file, ptr, bytes);
@@ -71,14 +71,14 @@ int write_trace(void *ptr, size_t bytes)
void respond_sock(int r)
{
- send_response_byte(master_fd, r);
+ send_response_byte(comm_fd, r);
}
/* Apprentice function */
int write_sock(void *ptr, size_t bytes)
{
- return send_data_pkt(apprentice_fd, ptr, bytes);
+ return send_data_pkt(comm_fd, ptr, bytes);
}
int read_trace(void *ptr, size_t bytes)
@@ -86,9 +86,9 @@ int read_trace(void *ptr, size_t bytes)
size_t res;
#ifdef HAVE_ZLIB
- if (apprentice_fd == STDIN_FILENO) {
+ if (comm_fd == STDIN_FILENO) {
#endif
- res = read(apprentice_fd, ptr, bytes);
+ res = read(comm_fd, ptr, bytes);
#ifdef HAVE_ZLIB
} else {
res = gzread(gz_trace_file, ptr, bytes);
@@ -218,11 +218,11 @@ int master(void)
{
if (sigsetjmp(jmpbuf, 1)) {
#ifdef HAVE_ZLIB
- if (trace && master_fd != STDOUT_FILENO) {
+ if (trace && comm_fd != STDOUT_FILENO) {
gzclose(gz_trace_file);
}
#endif
- close(master_fd);
+ close(comm_fd);
if (trace) {
fprintf(stderr, "trace complete after %zd checkpoints\n",
signal_count);
@@ -244,11 +244,11 @@ int apprentice(void)
{
if (sigsetjmp(jmpbuf, 1)) {
#ifdef HAVE_ZLIB
- if (trace && apprentice_fd != STDIN_FILENO) {
+ if (trace && comm_fd != STDIN_FILENO) {
gzclose(gz_trace_file);
}
#endif
- close(apprentice_fd);
+ close(comm_fd);
fprintf(stderr, "finished early after %zd checkpoints\n", signal_count);
return report_match_status(true);
}
@@ -375,31 +375,31 @@ int main(int argc, char **argv)
if (ismaster) {
if (trace) {
if (strcmp(trace_fn, "-") == 0) {
- master_fd = STDOUT_FILENO;
+ comm_fd = STDOUT_FILENO;
} else {
- master_fd = open(trace_fn, O_WRONLY | O_CREAT, S_IRWXU);
+ comm_fd = open(trace_fn, O_WRONLY | O_CREAT, S_IRWXU);
#ifdef HAVE_ZLIB
- gz_trace_file = gzdopen(master_fd, "wb9");
+ gz_trace_file = gzdopen(comm_fd, "wb9");
#endif
}
} else {
fprintf(stderr, "master port %d\n", port);
- master_fd = master_connect(port);
+ comm_fd = master_connect(port);
}
return master();
} else {
if (trace) {
if (strcmp(trace_fn, "-") == 0) {
- apprentice_fd = STDIN_FILENO;
+ comm_fd = STDIN_FILENO;
} else {
- apprentice_fd = open(trace_fn, O_RDONLY);
+ comm_fd = open(trace_fn, O_RDONLY);
#ifdef HAVE_ZLIB
- gz_trace_file = gzdopen(apprentice_fd, "rb");
+ gz_trace_file = gzdopen(comm_fd, "rb");
#endif
}
} else {
fprintf(stderr, "apprentice host %s port %d\n", hostname, port);
- apprentice_fd = apprentice_connect(hostname, port);
+ comm_fd = apprentice_connect(hostname, port);
}
return apprentice();
}
--
2.34.1
next prev parent reply other threads:[~2022-07-08 16:28 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-08 15:46 [RISU PATCH v4 00/29] risu cleanups and improvements Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 01/29] Use bool for tracing variables Richard Henderson
2022-07-08 15:46 ` Richard Henderson [this message]
2022-07-08 15:46 ` [RISU PATCH v4 03/29] Hoist trace file and socket opening Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 04/29] Adjust tracefile open for write Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 05/29] Use EXIT_FAILURE, EXIT_SUCCESS Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 06/29] Make some risu.c symbols static Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 07/29] Add enum RisuOp Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 08/29] Add enum RisuResult Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 09/29] Unify i/o functions and use RisuResult Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 10/29] Pass non-OK result back through siglongjmp Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 11/29] Always write for --master Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 12/29] Simplify syncing with master Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 13/29] Split RES_MISMATCH for registers and memory Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 14/29] Merge reginfo.c into risu.c Richard Henderson
2022-07-18 10:46 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 15/29] Rearrange reginfo and memblock buffers Richard Henderson
2022-07-18 10:46 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 16/29] Split out recv_register_info Richard Henderson
2022-07-18 10:48 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 17/29] Add magic and size to the trace header Richard Henderson
2022-07-18 10:51 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 18/29] Compute reginfo_size based on the reginfo Richard Henderson
2022-07-18 11:37 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 19/29] aarch64: Assume system support for SVE Richard Henderson
2022-07-18 11:38 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 20/29] aarch64: Reorg sve reginfo to save space Richard Henderson
2022-07-18 11:40 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 21/29] aarch64: Use arch_init to configure sve Richard Henderson
2022-07-18 11:44 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 22/29] ppc64: Use uint64_t to represent double Richard Henderson
2022-07-12 11:17 ` Matheus K. Ferst
2022-07-08 15:46 ` [RISU PATCH v4 23/29] Standardize reginfo_dump_mismatch printing Richard Henderson
2022-07-18 11:54 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 24/29] Add --fulldump and --diffdup options Richard Henderson
2022-07-18 12:06 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 25/29] Remove return value from reginfo_dump Richard Henderson
2022-07-18 11:55 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 26/29] ppc64: Clean up reginfo handling Richard Henderson
2022-07-12 11:17 ` Matheus K. Ferst
2022-07-08 15:46 ` [RISU PATCH v4 27/29] aarch64: Tidy reginfo dumping ahead of ZA state Richard Henderson
2022-07-18 12:08 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 28/29] aarch64: Add support for ZA storage Richard Henderson
2022-07-18 12:09 ` Peter Maydell
2022-07-08 15:47 ` [RISU PATCH v4 29/29] aarch64: Trivial SME test Richard Henderson
2022-07-18 12:11 ` Peter Maydell
2022-07-18 12:19 ` [RISU PATCH v4 00/29] risu cleanups and improvements Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220708154700.18682-3-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).