From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org, "Alex Bennée" <alex.bennee@linaro.org>
Subject: [RISU PATCH v4 06/29] Make some risu.c symbols static
Date: Fri, 8 Jul 2022 21:16:37 +0530 [thread overview]
Message-ID: <20220708154700.18682-7-richard.henderson@linaro.org> (raw)
In-Reply-To: <20220708154700.18682-1-richard.henderson@linaro.org>
These are unused in other translation units.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
risu.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/risu.c b/risu.c
index 26dc116..ab17c71 100644
--- a/risu.c
+++ b/risu.c
@@ -31,18 +31,18 @@
void *memblock;
static int comm_fd;
-bool trace;
-size_t signal_count;
+static bool trace;
+static size_t signal_count;
#ifdef HAVE_ZLIB
#include <zlib.h>
-gzFile gz_trace_file;
+static gzFile gz_trace_file;
#define TRACE_TYPE "compressed"
#else
#define TRACE_TYPE "uncompressed"
#endif
-sigjmp_buf jmpbuf;
+static sigjmp_buf jmpbuf;
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
@@ -113,7 +113,7 @@ void respond_trace(int r)
}
}
-void master_sigill(int sig, siginfo_t *si, void *uc)
+static void master_sigill(int sig, siginfo_t *si, void *uc)
{
int r;
signal_count++;
@@ -135,7 +135,7 @@ void master_sigill(int sig, siginfo_t *si, void *uc)
}
}
-void apprentice_sigill(int sig, siginfo_t *si, void *uc)
+static void apprentice_sigill(int sig, siginfo_t *si, void *uc)
{
int r;
signal_count++;
@@ -180,9 +180,9 @@ static void set_sigill_handler(void (*fn) (int, siginfo_t *, void *))
typedef void entrypoint_fn(void);
uintptr_t image_start_address;
-entrypoint_fn *image_start;
+static entrypoint_fn *image_start;
-void load_image(const char *imgfile)
+static void load_image(const char *imgfile)
{
/* Load image file into memory as executable */
struct stat st;
@@ -214,7 +214,7 @@ void load_image(const char *imgfile)
image_start_address = (uintptr_t) addr;
}
-int master(void)
+static int master(void)
{
if (sigsetjmp(jmpbuf, 1)) {
#ifdef HAVE_ZLIB
@@ -240,7 +240,7 @@ int master(void)
return EXIT_FAILURE;
}
-int apprentice(void)
+static int apprentice(void)
{
if (sigsetjmp(jmpbuf, 1)) {
#ifdef HAVE_ZLIB
@@ -261,9 +261,9 @@ int apprentice(void)
return EXIT_FAILURE;
}
-int ismaster;
+static int ismaster;
-void usage(void)
+static void usage(void)
{
fprintf(stderr,
"Usage: risu [--master] [--host <ip>] [--port <port>] <image file>"
--
2.34.1
next prev parent reply other threads:[~2022-07-08 16:24 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-08 15:46 [RISU PATCH v4 00/29] risu cleanups and improvements Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 01/29] Use bool for tracing variables Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 02/29] Unify master_fd and apprentice_fd to comm_fd Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 03/29] Hoist trace file and socket opening Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 04/29] Adjust tracefile open for write Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 05/29] Use EXIT_FAILURE, EXIT_SUCCESS Richard Henderson
2022-07-08 15:46 ` Richard Henderson [this message]
2022-07-08 15:46 ` [RISU PATCH v4 07/29] Add enum RisuOp Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 08/29] Add enum RisuResult Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 09/29] Unify i/o functions and use RisuResult Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 10/29] Pass non-OK result back through siglongjmp Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 11/29] Always write for --master Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 12/29] Simplify syncing with master Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 13/29] Split RES_MISMATCH for registers and memory Richard Henderson
2022-07-08 15:46 ` [RISU PATCH v4 14/29] Merge reginfo.c into risu.c Richard Henderson
2022-07-18 10:46 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 15/29] Rearrange reginfo and memblock buffers Richard Henderson
2022-07-18 10:46 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 16/29] Split out recv_register_info Richard Henderson
2022-07-18 10:48 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 17/29] Add magic and size to the trace header Richard Henderson
2022-07-18 10:51 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 18/29] Compute reginfo_size based on the reginfo Richard Henderson
2022-07-18 11:37 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 19/29] aarch64: Assume system support for SVE Richard Henderson
2022-07-18 11:38 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 20/29] aarch64: Reorg sve reginfo to save space Richard Henderson
2022-07-18 11:40 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 21/29] aarch64: Use arch_init to configure sve Richard Henderson
2022-07-18 11:44 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 22/29] ppc64: Use uint64_t to represent double Richard Henderson
2022-07-12 11:17 ` Matheus K. Ferst
2022-07-08 15:46 ` [RISU PATCH v4 23/29] Standardize reginfo_dump_mismatch printing Richard Henderson
2022-07-18 11:54 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 24/29] Add --fulldump and --diffdup options Richard Henderson
2022-07-18 12:06 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 25/29] Remove return value from reginfo_dump Richard Henderson
2022-07-18 11:55 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 26/29] ppc64: Clean up reginfo handling Richard Henderson
2022-07-12 11:17 ` Matheus K. Ferst
2022-07-08 15:46 ` [RISU PATCH v4 27/29] aarch64: Tidy reginfo dumping ahead of ZA state Richard Henderson
2022-07-18 12:08 ` Peter Maydell
2022-07-08 15:46 ` [RISU PATCH v4 28/29] aarch64: Add support for ZA storage Richard Henderson
2022-07-18 12:09 ` Peter Maydell
2022-07-08 15:47 ` [RISU PATCH v4 29/29] aarch64: Trivial SME test Richard Henderson
2022-07-18 12:11 ` Peter Maydell
2022-07-18 12:19 ` [RISU PATCH v4 00/29] risu cleanups and improvements Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220708154700.18682-7-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).