qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Cindy Lu <lulu@redhat.com>
To: lulu@redhat.com, qemu-devel@nongnu.org
Cc: "Stefan Hajnoczi" <stefanha@redhat.com>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
	virtio-fs@redhat.com, "Gonglei (Arei)" <arei.gonglei@huawei.com>,
	"Gerd Hoffmann" <kraxel@redhat.com>,
	"Jason Wang" <jasowang@redhat.com>,
	"Marc-André Lureau" <marcandre.lureau@redhat.com>
Subject: [PATCH v14 03/10] virtio-pci: decouple the single vector from the interrupt process
Date: Sat, 23 Jul 2022 16:54:18 +0800	[thread overview]
Message-ID: <20220723085425.823472-4-lulu@redhat.com> (raw)
In-Reply-To: <20220723085425.823472-1-lulu@redhat.com>

To reuse the interrupt process in configure interrupt
Need to decouple the single vector from the interrupt process.
We add new function kvm_virtio_pci_vector_use_one and _release_one.
These functions are used for the single vector, the whole process will
finish in the loop with vq number.

Signed-off-by: Cindy Lu <lulu@redhat.com>
---
 hw/virtio/virtio-pci.c | 131 +++++++++++++++++++++++------------------
 1 file changed, 73 insertions(+), 58 deletions(-)

diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 2869d0d2f6..4b86008bcf 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -676,7 +676,6 @@ static uint32_t virtio_read_config(PCIDevice *pci_dev,
 }
 
 static int kvm_virtio_pci_vq_vector_use(VirtIOPCIProxy *proxy,
-                                        unsigned int queue_no,
                                         unsigned int vector)
 {
     VirtIOIRQFD *irqfd = &proxy->vector_irqfd[vector];
@@ -741,87 +740,103 @@ static int virtio_pci_get_notifier(VirtIOPCIProxy *proxy, int queue_no,
     return 0;
 }
 
-static int kvm_virtio_pci_vector_use(VirtIOPCIProxy *proxy, int nvqs)
+static int kvm_virtio_pci_vector_use_one(VirtIOPCIProxy *proxy, int queue_no)
 {
+    unsigned int vector;
+    int ret;
+    EventNotifier *n;
     PCIDevice *dev = &proxy->pci_dev;
     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
     VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
-    unsigned int vector;
-    int ret, queue_no;
-    EventNotifier *n;
-    for (queue_no = 0; queue_no < nvqs; queue_no++) {
-        if (!virtio_queue_get_num(vdev, queue_no)) {
-            break;
-        }
-        ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
-        if (ret < 0) {
-            break;
-        }
-        if (vector >= msix_nr_vectors_allocated(dev)) {
-            continue;
-        }
-        ret = kvm_virtio_pci_vq_vector_use(proxy, queue_no, vector);
+
+    ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
+    if (ret < 0) {
+        return ret;
+    }
+    if (vector >= msix_nr_vectors_allocated(dev)) {
+        return 0;
+    }
+    ret = kvm_virtio_pci_vq_vector_use(proxy, vector);
+    if (ret < 0) {
+        goto undo;
+    }
+    /*
+     * If guest supports masking, set up irqfd now.
+     * Otherwise, delay until unmasked in the frontend.
+     */
+    if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
+        ret = kvm_virtio_pci_irqfd_use(proxy, n, vector);
         if (ret < 0) {
+            kvm_virtio_pci_vq_vector_release(proxy, vector);
             goto undo;
         }
-        /* If guest supports masking, set up irqfd now.
-         * Otherwise, delay until unmasked in the frontend.
-         */
-        if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
-            ret = kvm_virtio_pci_irqfd_use(proxy, n, vector);
-            if (ret < 0) {
-                kvm_virtio_pci_vq_vector_release(proxy, vector);
-                goto undo;
-            }
-        }
     }
-    return 0;
 
+    return 0;
 undo:
-    while (--queue_no >= 0) {
-        vector = virtio_queue_vector(vdev, queue_no);
-        if (vector >= msix_nr_vectors_allocated(dev)) {
-            continue;
+
+    vector = virtio_queue_vector(vdev, queue_no);
+    if (vector >= msix_nr_vectors_allocated(dev)) {
+        return ret;
+    }
+    if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
+        ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
+        if (ret < 0) {
+            return ret;
         }
-        if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
-            ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
-            if (ret < 0) {
-                break;
-            }
-            kvm_virtio_pci_irqfd_release(proxy, n, vector);
+        kvm_virtio_pci_irqfd_release(proxy, n, vector);
+    }
+    return ret;
+}
+static int kvm_virtio_pci_vector_use(VirtIOPCIProxy *proxy, int nvqs)
+{
+    int queue_no;
+    int ret = 0;
+    VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
+
+    for (queue_no = 0; queue_no < nvqs; queue_no++) {
+        if (!virtio_queue_get_num(vdev, queue_no)) {
+            return -1;
         }
-        kvm_virtio_pci_vq_vector_release(proxy, vector);
+        ret = kvm_virtio_pci_vector_use_one(proxy, queue_no);
     }
     return ret;
 }
 
-static void kvm_virtio_pci_vector_release(VirtIOPCIProxy *proxy, int nvqs)
+
+static void kvm_virtio_pci_vector_release_one(VirtIOPCIProxy *proxy,
+                                              int queue_no)
 {
-    PCIDevice *dev = &proxy->pci_dev;
     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
     unsigned int vector;
-    int queue_no;
-    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
     EventNotifier *n;
-    int ret ;
+    int ret;
+    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
+    PCIDevice *dev = &proxy->pci_dev;
+
+    ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
+    if (ret < 0) {
+        return;
+    }
+    if (vector >= msix_nr_vectors_allocated(dev)) {
+        return;
+    }
+    if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
+        kvm_virtio_pci_irqfd_release(proxy, n, vector);
+    }
+    kvm_virtio_pci_vq_vector_release(proxy, vector);
+}
+
+static void kvm_virtio_pci_vector_release(VirtIOPCIProxy *proxy, int nvqs)
+{
+    int queue_no;
+    VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
+
     for (queue_no = 0; queue_no < nvqs; queue_no++) {
         if (!virtio_queue_get_num(vdev, queue_no)) {
             break;
         }
-        ret = virtio_pci_get_notifier(proxy, queue_no, &n, &vector);
-        if (ret < 0) {
-            break;
-        }
-        if (vector >= msix_nr_vectors_allocated(dev)) {
-            continue;
-        }
-        /* If guest supports masking, clean up irqfd now.
-         * Otherwise, it was cleaned when masked in the frontend.
-         */
-        if (vdev->use_guest_notifier_mask && k->guest_notifier_mask) {
-            kvm_virtio_pci_irqfd_release(proxy, n, vector);
-        }
-        kvm_virtio_pci_vq_vector_release(proxy, vector);
+        kvm_virtio_pci_vector_release_one(proxy, queue_no);
     }
 }
 
-- 
2.34.3



  parent reply	other threads:[~2022-07-23  9:08 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-23  8:54 [PATCH v14 00/10] vhost-vdpa: add support for configure interrupt Cindy Lu
2022-07-23  8:54 ` [PATCH v14 01/10] virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX Cindy Lu
2022-07-23  8:54 ` [PATCH v14 02/10] virtio-pci: decouple notifier from interrupt process Cindy Lu
2022-07-23  8:54 ` Cindy Lu [this message]
2022-07-23  8:54 ` [PATCH v14 04/10] vhost: introduce new VhostOps vhost_set_config_call Cindy Lu
2022-07-23  8:54 ` [PATCH v14 05/10] vhost-vdpa: add support for config interrupt Cindy Lu
2022-07-23  8:54 ` [PATCH v14 06/10] virtio: add support for configure interrupt Cindy Lu
2022-07-23  8:54 ` [PATCH v14 07/10] vhost: " Cindy Lu
2022-07-23  8:54 ` [PATCH v14 08/10] virtio-net: " Cindy Lu
2022-07-23  8:54 ` [PATCH v14 09/10] virtio-mmio: " Cindy Lu
2022-07-23  8:54 ` [PATCH v14 10/10] virtio-pci: " Cindy Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220723085425.823472-4-lulu@redhat.com \
    --to=lulu@redhat.com \
    --cc=arei.gonglei@huawei.com \
    --cc=dgilbert@redhat.com \
    --cc=jasowang@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    --cc=virtio-fs@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).