[PATCH v2] hw/net/vmxnet3: allow VMXNET3_MAX_MTU itself as a value

[Fiona Ebner <f.ebner@proxmox.com>]

Currently, VMXNET3_MAX_MTU itself (being 9000) is not considered a
valid value for the MTU, but a guest running ESXi 7.0 might try to
set it and fail the assert [0].

In the Linux kernel, dev->max_mtu itself is a valid value for the MTU
and for the vmxnet3 driver it's 9000, so a guest running Linux will
also fail the assert when trying to set an MTU of 9000.

VMXNET3_MAX_MTU and s->mtu don't seem to be used in relation to buffer
allocations/accesses, so allowing the upper limit itself as a value
should be fine.

[0]: https://forum.proxmox.com/threads/114011/

Fixes: d05dcd94ae ("net: vmxnet3: validate configuration values during activate (CVE-2021-20203)")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---

Feel free to adapt the commit message as you see fit.

v1 -> v2:
    * Add commit message with some rationale.

 hw/net/vmxnet3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/net/vmxnet3.c b/hw/net/vmxnet3.c
index 0b7acf7f89..a2037583bf 100644
--- a/hw/net/vmxnet3.c
+++ b/hw/net/vmxnet3.c
@@ -1441,7 +1441,7 @@ static void vmxnet3_activate_device(VMXNET3State *s)
     vmxnet3_setup_rx_filtering(s);
     /* Cache fields from shared memory */
     s->mtu = VMXNET3_READ_DRV_SHARED32(d, s->drv_shmem, devRead.misc.mtu);
-    assert(VMXNET3_MIN_MTU <= s->mtu && s->mtu < VMXNET3_MAX_MTU);
+    assert(VMXNET3_MIN_MTU <= s->mtu && s->mtu <= VMXNET3_MAX_MTU);
     VMW_CFPRN("MTU is %u", s->mtu);
 
     s->max_rx_frags =
-- 
2.30.2