[PATCH v7 00/10] parallels: Refactor the code of images checks and fix a bug

[PATCH v7 00/10] parallels: Refactor the code of images checks and fix a bug

[Alexander Ivanov]

Fix image inflation when offset in BAT is out of image.

Replace whole BAT syncing by flushing only dirty blocks.

Move all the checks outside the main check function in
separate functions

Use WITH_QEMU_LOCK_GUARD for simplier code.

v7:
1,2: Fix string lengths in the commit messages.
3: Fix a typo in the commit message.

v6:
1: Move the error check inside the loop. Move file size getting
   to the function beginning. Skip out-of-image offsets.
2: A new patch - don't let high_off be more than the end of the last cluster.
3: Set data_end without any condition.
7: Move data_end setting to parallels_check_outside_image().
8: Remove s->data_end setting from parallels_check_leak().
   Fix 'i' type.

v5:
2: Change the way of data_end fixing.
6,7: Move data_end check to parallels_check_leak().

v4:
1: Move s->data_end fix to parallels_co_check(). Split the check
   in parallels_open() and the fix in parallels_co_check() to two patches.
2: A new patch - a part of the patch 1.
   Add a fix for data_end to parallels_co_check().
3: Move offset convertation to parallels_set_bat_entry().
4: Fix 'ret' rewriting by bdrv_co_flush() results.
7: Keep 'i' as uint32_t.

v3:

1-8: Fix commit message.

v2:

2: A new patch - a part of the splitted patch 2.
3: Patch order was changed so the replacement is done in parallels_co_check.
   Now we use a helper to set BAT entry and mark the block dirty.
4: Revert the condition with s->header_unclean.
5: Move unrelated helper parallels_set_bat_entry creation to a separate patch.
7: Move fragmentation counting code to this function too.
8: Fix an incorrect usage of WITH_QEMU_LOCK_GUARD.


Alexander Ivanov (10):
  parallels: Out of image offset in BAT leads to image inflation
  parallels: Fix high_off calculation in parallels_co_check()
  parallels: Fix data_end after out-of-image check
  parallels: create parallels_set_bat_entry_helper() to assign BAT value
  parallels: Use generic infrastructure for BAT writing in
    parallels_co_check()
  parallels: Move check of unclean image to a separate function
  parallels: Move check of cluster outside image to a separate function
  parallels: Move check of leaks to a separate function
  parallels: Move statistic collection to a separate function
  parallels: Replace qemu_co_mutex_lock by WITH_QEMU_LOCK_GUARD

 block/parallels.c | 193 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 138 insertions(+), 55 deletions(-)

-- 
2.34.1

[PATCH v7 01/10] parallels: Out of image offset in BAT leads to image inflation

[Alexander Ivanov]

data_end field in BDRVParallelsState is set to the biggest offset present
in BAT. If this offset is outside of the image, any further write
will create the cluster at this offset and/or the image will be truncated
to this offset on close. This is definitely not correct.
Raise an error in parallels_open() if data_end points outside the image
and it is not a check (let the check to repaire the image).
Set data_end to the end of the cluster with the last correct offset.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
---
 block/parallels.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/block/parallels.c b/block/parallels.c
index a229c06f25..93bc2750ef 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -732,6 +732,7 @@ static int parallels_open(BlockDriverState *bs, QDict *options, int flags,
     BDRVParallelsState *s = bs->opaque;
     ParallelsHeader ph;
     int ret, size, i;
+    int64_t file_size;
     QemuOpts *opts = NULL;
     Error *local_err = NULL;
     char *buf;
@@ -742,6 +743,12 @@ static int parallels_open(BlockDriverState *bs, QDict *options, int flags,
         return -EINVAL;
     }
 
+    file_size = bdrv_getlength(bs->file->bs);
+    if (file_size < 0) {
+        return -EINVAL;
+    }
+    file_size >>= BDRV_SECTOR_BITS;
+
     ret = bdrv_pread(bs->file, 0, sizeof(ph), &ph, 0);
     if (ret < 0) {
         goto fail;
@@ -806,6 +813,16 @@ static int parallels_open(BlockDriverState *bs, QDict *options, int flags,
 
     for (i = 0; i < s->bat_size; i++) {
         int64_t off = bat2sect(s, i);
+        if (off >= file_size) {
+            if (flags & BDRV_O_CHECK) {
+                continue;
+            }
+            error_setg(errp, "parallels: Offset %" PRIi64 " in BAT[%d] entry "
+                       "is larger than file size (%" PRIi64 ")",
+                       off, i, file_size);
+            ret = -EINVAL;
+            goto fail;
+        }
         if (off >= s->data_end) {
             s->data_end = off + s->tracks;
         }
-- 
2.34.1

[PATCH v7 02/10] parallels: Fix high_off calculation in parallels_co_check()

[Alexander Ivanov]

Don't let high_off be more than the file size
even if we don't fix the image.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
---
 block/parallels.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/block/parallels.c b/block/parallels.c
index 93bc2750ef..7e8cdbbc3a 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -460,12 +460,12 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
                     fix & BDRV_FIX_ERRORS ? "Repairing" : "ERROR", i);
             res->corruptions++;
             if (fix & BDRV_FIX_ERRORS) {
-                prev_off = 0;
                 s->bat_bitmap[i] = 0;
                 res->corruptions_fixed++;
                 flush_bat = true;
-                continue;
             }
+            prev_off = 0;
+            continue;
         }
 
         res->bfi.allocated_clusters++;
-- 
2.34.1

[PATCH v7 03/10] parallels: Fix data_end after out-of-image check

[Alexander Ivanov]

Set data_end to the end of the last cluster inside the image.
In such a way we can be sure that corrupted offsets in the BAT
can't affect on the image size.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
---
 block/parallels.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/block/parallels.c b/block/parallels.c
index 7e8cdbbc3a..c1ff8bb5f0 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -514,6 +514,8 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
         }
     }
 
+    s->data_end = res->image_end_offset >> BDRV_SECTOR_BITS;
+
 out:
     qemu_co_mutex_unlock(&s->lock);
     return ret;
-- 
2.34.1

[PATCH v7 04/10] parallels: create parallels_set_bat_entry_helper() to assign BAT value

[Alexander Ivanov]

This helper will be reused in next patches during parallels_co_check
rework to simplify its code.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
 block/parallels.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/block/parallels.c b/block/parallels.c
index c1ff8bb5f0..52a5cce46c 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -165,6 +165,13 @@ static int64_t block_status(BDRVParallelsState *s, int64_t sector_num,
     return start_off;
 }
 
+static void parallels_set_bat_entry(BDRVParallelsState *s,
+                                    uint32_t index, uint32_t offset)
+{
+    s->bat_bitmap[index] = cpu_to_le32(offset);
+    bitmap_set(s->bat_dirty_bmap, bat_entry_off(index) / s->bat_dirty_block, 1);
+}
+
 static int64_t allocate_clusters(BlockDriverState *bs, int64_t sector_num,
                                  int nb_sectors, int *pnum)
 {
@@ -250,10 +257,8 @@ static int64_t allocate_clusters(BlockDriverState *bs, int64_t sector_num,
     }
 
     for (i = 0; i < to_allocate; i++) {
-        s->bat_bitmap[idx + i] = cpu_to_le32(s->data_end / s->off_multiplier);
+        parallels_set_bat_entry(s, idx + i, s->data_end / s->off_multiplier);
         s->data_end += s->tracks;
-        bitmap_set(s->bat_dirty_bmap,
-                   bat_entry_off(idx + i) / s->bat_dirty_block, 1);
     }
 
     return bat2sect(s, idx) + sector_num % s->tracks;
-- 
2.34.1

[PATCH v7 05/10] parallels: Use generic infrastructure for BAT writing in parallels_co_check()

[Alexander Ivanov]

BAT is written in the context of conventional operations over
the image inside bdrv_co_flush() when it calls
parallels_co_flush_to_os() callback. Thus we should not
modify BAT array directly, but call parallels_set_bat_entry()
helper and bdrv_co_flush() further on. After that there is no
need to manually write BAT and track its modification.

This makes code more generic and allows to split
parallels_set_bat_entry() for independent pieces.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
---
 block/parallels.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/block/parallels.c b/block/parallels.c
index 52a5cce46c..b4a85b8aa7 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -425,9 +425,8 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
 {
     BDRVParallelsState *s = bs->opaque;
     int64_t size, prev_off, high_off;
-    int ret;
+    int ret = 0;
     uint32_t i;
-    bool flush_bat = false;
 
     size = bdrv_getlength(bs->file->bs);
     if (size < 0) {
@@ -465,9 +464,8 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
                     fix & BDRV_FIX_ERRORS ? "Repairing" : "ERROR", i);
             res->corruptions++;
             if (fix & BDRV_FIX_ERRORS) {
-                s->bat_bitmap[i] = 0;
+                parallels_set_bat_entry(s, i, 0);
                 res->corruptions_fixed++;
-                flush_bat = true;
             }
             prev_off = 0;
             continue;
@@ -484,15 +482,6 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
         prev_off = off;
     }
 
-    ret = 0;
-    if (flush_bat) {
-        ret = bdrv_co_pwrite_sync(bs->file, 0, s->header_size, s->header, 0);
-        if (ret < 0) {
-            res->check_errors++;
-            goto out;
-        }
-    }
-
     res->image_end_offset = high_off + s->cluster_size;
     if (size > res->image_end_offset) {
         int64_t count;
@@ -523,6 +512,14 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
 
 out:
     qemu_co_mutex_unlock(&s->lock);
+
+    if (ret == 0) {
+        ret = bdrv_co_flush(bs);
+        if (ret < 0) {
+            res->check_errors++;
+        }
+    }
+
     return ret;
 }
 
-- 
2.34.1

[PATCH v7 06/10] parallels: Move check of unclean image to a separate function

[Alexander Ivanov]

We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
 block/parallels.c | 31 +++++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/block/parallels.c b/block/parallels.c
index b4a85b8aa7..eea318f809 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -418,6 +418,25 @@ static coroutine_fn int parallels_co_readv(BlockDriverState *bs,
     return ret;
 }
 
+static void parallels_check_unclean(BlockDriverState *bs,
+                                    BdrvCheckResult *res,
+                                    BdrvCheckMode fix)
+{
+    BDRVParallelsState *s = bs->opaque;
+
+    if (!s->header_unclean) {
+        return;
+    }
+
+    fprintf(stderr, "%s image was not closed correctly\n",
+            fix & BDRV_FIX_ERRORS ? "Repairing" : "ERROR");
+    res->corruptions++;
+    if (fix & BDRV_FIX_ERRORS) {
+        /* parallels_close will do the job right */
+        res->corruptions_fixed++;
+        s->header_unclean = false;
+    }
+}
 
 static int coroutine_fn parallels_co_check(BlockDriverState *bs,
                                            BdrvCheckResult *res,
@@ -435,16 +454,8 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
     }
 
     qemu_co_mutex_lock(&s->lock);
-    if (s->header_unclean) {
-        fprintf(stderr, "%s image was not closed correctly\n",
-                fix & BDRV_FIX_ERRORS ? "Repairing" : "ERROR");
-        res->corruptions++;
-        if (fix & BDRV_FIX_ERRORS) {
-            /* parallels_close will do the job right */
-            res->corruptions_fixed++;
-            s->header_unclean = false;
-        }
-    }
+
+    parallels_check_unclean(bs, res, fix);
 
     res->bfi.total_clusters = s->bat_size;
     res->bfi.compressed_clusters = 0; /* compression is not supported */
-- 
2.34.1

[PATCH v7 07/10] parallels: Move check of cluster outside image to a separate function

[Alexander Ivanov]

We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
---
 block/parallels.c | 59 ++++++++++++++++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 16 deletions(-)

diff --git a/block/parallels.c b/block/parallels.c
index eea318f809..f50cd232aa 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -438,13 +438,50 @@ static void parallels_check_unclean(BlockDriverState *bs,
     }
 }
 
+static int parallels_check_outside_image(BlockDriverState *bs,
+                                         BdrvCheckResult *res,
+                                         BdrvCheckMode fix)
+{
+    BDRVParallelsState *s = bs->opaque;
+    uint32_t i;
+    int64_t off, high_off, size;
+
+    size = bdrv_getlength(bs->file->bs);
+    if (size < 0) {
+        res->check_errors++;
+        return size;
+    }
+
+    high_off = 0;
+    for (i = 0; i < s->bat_size; i++) {
+        off = bat2sect(s, i) << BDRV_SECTOR_BITS;
+        if (off > size) {
+            fprintf(stderr, "%s cluster %u is outside image\n",
+                    fix & BDRV_FIX_ERRORS ? "Repairing" : "ERROR", i);
+            res->corruptions++;
+            if (fix & BDRV_FIX_ERRORS) {
+                parallels_set_bat_entry(s, i, 0);
+                res->corruptions_fixed++;
+            }
+            continue;
+        }
+        if (high_off < off) {
+            high_off = off;
+        }
+    }
+
+    s->data_end = (high_off + s->cluster_size) >> BDRV_SECTOR_BITS;
+
+    return 0;
+}
+
 static int coroutine_fn parallels_co_check(BlockDriverState *bs,
                                            BdrvCheckResult *res,
                                            BdrvCheckMode fix)
 {
     BDRVParallelsState *s = bs->opaque;
     int64_t size, prev_off, high_off;
-    int ret = 0;
+    int ret;
     uint32_t i;
 
     size = bdrv_getlength(bs->file->bs);
@@ -457,6 +494,11 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
 
     parallels_check_unclean(bs, res, fix);
 
+    ret = parallels_check_outside_image(bs, res, fix);
+    if (ret < 0) {
+        goto out;
+    }
+
     res->bfi.total_clusters = s->bat_size;
     res->bfi.compressed_clusters = 0; /* compression is not supported */
 
@@ -469,19 +511,6 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
             continue;
         }
 
-        /* cluster outside the image */
-        if (off > size) {
-            fprintf(stderr, "%s cluster %u is outside image\n",
-                    fix & BDRV_FIX_ERRORS ? "Repairing" : "ERROR", i);
-            res->corruptions++;
-            if (fix & BDRV_FIX_ERRORS) {
-                parallels_set_bat_entry(s, i, 0);
-                res->corruptions_fixed++;
-            }
-            prev_off = 0;
-            continue;
-        }
-
         res->bfi.allocated_clusters++;
         if (off > high_off) {
             high_off = off;
@@ -519,8 +548,6 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
         }
     }
 
-    s->data_end = res->image_end_offset >> BDRV_SECTOR_BITS;
-
 out:
     qemu_co_mutex_unlock(&s->lock);
 
-- 
2.34.1

[PATCH v7 08/10] parallels: Move check of leaks to a separate function

[Alexander Ivanov]

We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
---
 block/parallels.c | 84 +++++++++++++++++++++++++++++------------------
 1 file changed, 52 insertions(+), 32 deletions(-)

diff --git a/block/parallels.c b/block/parallels.c
index f50cd232aa..1874045c51 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -475,14 +475,14 @@ static int parallels_check_outside_image(BlockDriverState *bs,
     return 0;
 }
 
-static int coroutine_fn parallels_co_check(BlockDriverState *bs,
-                                           BdrvCheckResult *res,
-                                           BdrvCheckMode fix)
+static int parallels_check_leak(BlockDriverState *bs,
+                                BdrvCheckResult *res,
+                                BdrvCheckMode fix)
 {
     BDRVParallelsState *s = bs->opaque;
-    int64_t size, prev_off, high_off;
-    int ret;
+    int64_t size, off, high_off, count;
     uint32_t i;
+    int ret;
 
     size = bdrv_getlength(bs->file->bs);
     if (size < 0) {
@@ -490,41 +490,16 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
         return size;
     }
 
-    qemu_co_mutex_lock(&s->lock);
-
-    parallels_check_unclean(bs, res, fix);
-
-    ret = parallels_check_outside_image(bs, res, fix);
-    if (ret < 0) {
-        goto out;
-    }
-
-    res->bfi.total_clusters = s->bat_size;
-    res->bfi.compressed_clusters = 0; /* compression is not supported */
-
     high_off = 0;
-    prev_off = 0;
     for (i = 0; i < s->bat_size; i++) {
-        int64_t off = bat2sect(s, i) << BDRV_SECTOR_BITS;
-        if (off == 0) {
-            prev_off = 0;
-            continue;
-        }
-
-        res->bfi.allocated_clusters++;
+        off = bat2sect(s, i) << BDRV_SECTOR_BITS;
         if (off > high_off) {
             high_off = off;
         }
-
-        if (prev_off != 0 && (prev_off + s->cluster_size) != off) {
-            res->bfi.fragmented_clusters++;
-        }
-        prev_off = off;
     }
 
     res->image_end_offset = high_off + s->cluster_size;
     if (size > res->image_end_offset) {
-        int64_t count;
         count = DIV_ROUND_UP(size - res->image_end_offset, s->cluster_size);
         fprintf(stderr, "%s space leaked at the end of the image %" PRId64 "\n",
                 fix & BDRV_FIX_LEAKS ? "Repairing" : "ERROR",
@@ -542,12 +517,57 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
             if (ret < 0) {
                 error_report_err(local_err);
                 res->check_errors++;
-                goto out;
+                return ret;
             }
             res->leaks_fixed += count;
         }
     }
 
+    return 0;
+}
+
+static int coroutine_fn parallels_co_check(BlockDriverState *bs,
+                                           BdrvCheckResult *res,
+                                           BdrvCheckMode fix)
+{
+    BDRVParallelsState *s = bs->opaque;
+    int64_t prev_off;
+    int ret;
+    uint32_t i;
+
+    qemu_co_mutex_lock(&s->lock);
+
+    parallels_check_unclean(bs, res, fix);
+
+    ret = parallels_check_outside_image(bs, res, fix);
+    if (ret < 0) {
+        goto out;
+    }
+
+    ret = parallels_check_leak(bs, res, fix);
+    if (ret < 0) {
+        goto out;
+    }
+
+    res->bfi.total_clusters = s->bat_size;
+    res->bfi.compressed_clusters = 0; /* compression is not supported */
+
+    prev_off = 0;
+    for (i = 0; i < s->bat_size; i++) {
+        int64_t off = bat2sect(s, i) << BDRV_SECTOR_BITS;
+        if (off == 0) {
+            prev_off = 0;
+            continue;
+        }
+
+        res->bfi.allocated_clusters++;
+
+        if (prev_off != 0 && (prev_off + s->cluster_size) != off) {
+            res->bfi.fragmented_clusters++;
+        }
+        prev_off = off;
+    }
+
 out:
     qemu_co_mutex_unlock(&s->lock);
 
-- 
2.34.1

[PATCH v7 09/10] parallels: Move statistic collection to a separate function

[Alexander Ivanov]

We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
 block/parallels.c | 53 +++++++++++++++++++++++++++--------------------
 1 file changed, 31 insertions(+), 22 deletions(-)

diff --git a/block/parallels.c b/block/parallels.c
index 1874045c51..eacfdea4b6 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -526,47 +526,56 @@ static int parallels_check_leak(BlockDriverState *bs,
     return 0;
 }
 
-static int coroutine_fn parallels_co_check(BlockDriverState *bs,
-                                           BdrvCheckResult *res,
-                                           BdrvCheckMode fix)
+static void parallels_collect_statistics(BlockDriverState *bs,
+                                         BdrvCheckResult *res,
+                                         BdrvCheckMode fix)
 {
     BDRVParallelsState *s = bs->opaque;
-    int64_t prev_off;
-    int ret;
+    int64_t off, prev_off;
     uint32_t i;
 
-    qemu_co_mutex_lock(&s->lock);
-
-    parallels_check_unclean(bs, res, fix);
-
-    ret = parallels_check_outside_image(bs, res, fix);
-    if (ret < 0) {
-        goto out;
-    }
-
-    ret = parallels_check_leak(bs, res, fix);
-    if (ret < 0) {
-        goto out;
-    }
-
     res->bfi.total_clusters = s->bat_size;
     res->bfi.compressed_clusters = 0; /* compression is not supported */
 
     prev_off = 0;
     for (i = 0; i < s->bat_size; i++) {
-        int64_t off = bat2sect(s, i) << BDRV_SECTOR_BITS;
+        off = bat2sect(s, i) << BDRV_SECTOR_BITS;
         if (off == 0) {
             prev_off = 0;
             continue;
         }
 
-        res->bfi.allocated_clusters++;
-
         if (prev_off != 0 && (prev_off + s->cluster_size) != off) {
             res->bfi.fragmented_clusters++;
         }
+
         prev_off = off;
+        res->bfi.allocated_clusters++;
     }
+}
+
+static int coroutine_fn parallels_co_check(BlockDriverState *bs,
+                                           BdrvCheckResult *res,
+                                           BdrvCheckMode fix)
+{
+    BDRVParallelsState *s = bs->opaque;
+    int ret;
+
+    qemu_co_mutex_lock(&s->lock);
+
+    parallels_check_unclean(bs, res, fix);
+
+    ret = parallels_check_outside_image(bs, res, fix);
+    if (ret < 0) {
+        goto out;
+    }
+
+    ret = parallels_check_leak(bs, res, fix);
+    if (ret < 0) {
+        goto out;
+    }
+
+    parallels_collect_statistics(bs, res, fix);
 
 out:
     qemu_co_mutex_unlock(&s->lock);
-- 
2.34.1

[PATCH v7 10/10] parallels: Replace qemu_co_mutex_lock by WITH_QEMU_LOCK_GUARD

[Alexander Ivanov]

Replace the way we use mutex in parallels_co_check() for simplier
and less error prone code.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
---
 block/parallels.c | 33 ++++++++++++++-------------------
 1 file changed, 14 insertions(+), 19 deletions(-)

diff --git a/block/parallels.c b/block/parallels.c
index eacfdea4b6..8943eccbf5 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -561,30 +561,25 @@ static int coroutine_fn parallels_co_check(BlockDriverState *bs,
     BDRVParallelsState *s = bs->opaque;
     int ret;
 
-    qemu_co_mutex_lock(&s->lock);
+    WITH_QEMU_LOCK_GUARD(&s->lock) {
+        parallels_check_unclean(bs, res, fix);
 
-    parallels_check_unclean(bs, res, fix);
+        ret = parallels_check_outside_image(bs, res, fix);
+        if (ret < 0) {
+            return ret;
+        }
 
-    ret = parallels_check_outside_image(bs, res, fix);
-    if (ret < 0) {
-        goto out;
-    }
+        ret = parallels_check_leak(bs, res, fix);
+        if (ret < 0) {
+            return ret;
+        }
 
-    ret = parallels_check_leak(bs, res, fix);
-    if (ret < 0) {
-        goto out;
+        parallels_collect_statistics(bs, res, fix);
     }
 
-    parallels_collect_statistics(bs, res, fix);
-
-out:
-    qemu_co_mutex_unlock(&s->lock);
-
-    if (ret == 0) {
-        ret = bdrv_co_flush(bs);
-        if (ret < 0) {
-            res->check_errors++;
-        }
+    ret = bdrv_co_flush(bs);
+    if (ret < 0) {
+        res->check_errors++;
     }
 
     return ret;
-- 
2.34.1

[PATCH v7 11/10] parallels: Incorrect condition in out-of-image check

[Alexander Ivanov]

All the offsets in the BAT must be lower than the file size.
Fix the check condition for correct check.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
---
 block/parallels.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/parallels.c b/block/parallels.c
index 8943eccbf5..e6e8b9e369 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -455,7 +455,7 @@ static int parallels_check_outside_image(BlockDriverState *bs,
     high_off = 0;
     for (i = 0; i < s->bat_size; i++) {
         off = bat2sect(s, i) << BDRV_SECTOR_BITS;
-        if (off > size) {
+        if (off >= size) {
             fprintf(stderr, "%s cluster %u is outside image\n",
                     fix & BDRV_FIX_ERRORS ? "Repairing" : "ERROR", i);
             res->corruptions++;
-- 
2.34.1

Re: [PATCH v7 00/10] parallels: Refactor the code of images checks and fix a bug

[Denis V. Lunev]

On 29.08.2022 12:12, Alexander Ivanov wrote:
> Fix image inflation when offset in BAT is out of image.
>
> Replace whole BAT syncing by flushing only dirty blocks.
>
> Move all the checks outside the main check function in
> separate functions
>
> Use WITH_QEMU_LOCK_GUARD for simplier code.
>
> v7:
> 1,2: Fix string lengths in the commit messages.
> 3: Fix a typo in the commit message.
>
> v6:
> 1: Move the error check inside the loop. Move file size getting
>     to the function beginning. Skip out-of-image offsets.
> 2: A new patch - don't let high_off be more than the end of the last cluster.
> 3: Set data_end without any condition.
> 7: Move data_end setting to parallels_check_outside_image().
> 8: Remove s->data_end setting from parallels_check_leak().
>     Fix 'i' type.
>
> v5:
> 2: Change the way of data_end fixing.
> 6,7: Move data_end check to parallels_check_leak().
>
> v4:
> 1: Move s->data_end fix to parallels_co_check(). Split the check
>     in parallels_open() and the fix in parallels_co_check() to two patches.
> 2: A new patch - a part of the patch 1.
>     Add a fix for data_end to parallels_co_check().
> 3: Move offset convertation to parallels_set_bat_entry().
> 4: Fix 'ret' rewriting by bdrv_co_flush() results.
> 7: Keep 'i' as uint32_t.
>
> v3:
>
> 1-8: Fix commit message.
>
> v2:
>
> 2: A new patch - a part of the splitted patch 2.
> 3: Patch order was changed so the replacement is done in parallels_co_check.
>     Now we use a helper to set BAT entry and mark the block dirty.
> 4: Revert the condition with s->header_unclean.
> 5: Move unrelated helper parallels_set_bat_entry creation to a separate patch.
> 7: Move fragmentation counting code to this function too.
> 8: Fix an incorrect usage of WITH_QEMU_LOCK_GUARD.
>
>
> Alexander Ivanov (10):
>    parallels: Out of image offset in BAT leads to image inflation
>    parallels: Fix high_off calculation in parallels_co_check()
>    parallels: Fix data_end after out-of-image check
>    parallels: create parallels_set_bat_entry_helper() to assign BAT value
>    parallels: Use generic infrastructure for BAT writing in
>      parallels_co_check()
>    parallels: Move check of unclean image to a separate function
>    parallels: Move check of cluster outside image to a separate function
>    parallels: Move check of leaks to a separate function
>    parallels: Move statistic collection to a separate function
>    parallels: Replace qemu_co_mutex_lock by WITH_QEMU_LOCK_GUARD
>
>   block/parallels.c | 193 +++++++++++++++++++++++++++++++++-------------
>   1 file changed, 138 insertions(+), 55 deletions(-)
>
queued, thanks