From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Zhang Chen <chen.zhang@intel.com>, Jason Wang <jasowang@redhat.com>
Subject: [PULL 20/21] net/colo.c: Fix the pointer issue reported by Coverity.
Date: Fri, 2 Sep 2022 14:41:37 +0800 [thread overview]
Message-ID: <20220902064138.56468-21-jasowang@redhat.com> (raw)
In-Reply-To: <20220902064138.56468-1-jasowang@redhat.com>
From: Zhang Chen <chen.zhang@intel.com>
When enabled the virtio-net-pci, guest network packet will
load the vnet_hdr. In COLO status, the primary VM's network
packet maybe redirect to another VM, it needs filter-redirect
enable the vnet_hdr flag at the same time, COLO-proxy will
correctly parse the original network packet. If have any
misconfiguration here, the vnet_hdr_len is wrong for parse
the packet, the data+offset will point to wrong place.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
net/colo.c | 25 ++++++++++++++++---------
net/colo.h | 1 +
net/trace-events | 2 +-
3 files changed, 18 insertions(+), 10 deletions(-)
diff --git a/net/colo.c b/net/colo.c
index 6b0ff56..fb2c36a 100644
--- a/net/colo.c
+++ b/net/colo.c
@@ -44,21 +44,28 @@ int parse_packet_early(Packet *pkt)
{
int network_length;
static const uint8_t vlan[] = {0x81, 0x00};
- uint8_t *data = pkt->data + pkt->vnet_hdr_len;
+ uint8_t *data = pkt->data;
uint16_t l3_proto;
ssize_t l2hdr_len;
- if (data == NULL) {
- trace_colo_proxy_main_vnet_info("This packet is not parsed correctly, "
- "pkt->vnet_hdr_len", pkt->vnet_hdr_len);
+ assert(data);
+
+ /* Check the received vnet_hdr_len then add the offset */
+ if ((pkt->vnet_hdr_len > sizeof(struct virtio_net_hdr_v1_hash)) ||
+ (pkt->size < sizeof(struct eth_header) + sizeof(struct vlan_header) +
+ pkt->vnet_hdr_len)) {
+ /*
+ * The received remote packet maybe misconfiguration here,
+ * Please enable/disable filter module's the vnet_hdr flag at
+ * the same time.
+ */
+ trace_colo_proxy_main_vnet_info("This received packet load wrong ",
+ pkt->vnet_hdr_len, pkt->size);
return 1;
}
- l2hdr_len = eth_get_l2_hdr_length(data);
+ data += pkt->vnet_hdr_len;
- if (pkt->size < ETH_HLEN + pkt->vnet_hdr_len) {
- trace_colo_proxy_main("pkt->size < ETH_HLEN");
- return 1;
- }
+ l2hdr_len = eth_get_l2_hdr_length(data);
/*
* TODO: support vlan.
diff --git a/net/colo.h b/net/colo.h
index 8b3e8d5..22fc303 100644
--- a/net/colo.h
+++ b/net/colo.h
@@ -18,6 +18,7 @@
#include "qemu/jhash.h"
#include "qemu/timer.h"
#include "net/eth.h"
+#include "standard-headers/linux/virtio_net.h"
#define HASHTABLE_MAX_SIZE 16384
diff --git a/net/trace-events b/net/trace-events
index 6af927b..823a071 100644
--- a/net/trace-events
+++ b/net/trace-events
@@ -9,7 +9,7 @@ vhost_user_event(const char *chr, int event) "chr: %s got event: %d"
# colo.c
colo_proxy_main(const char *chr) ": %s"
-colo_proxy_main_vnet_info(const char *sta, int size) ": %s = %d"
+colo_proxy_main_vnet_info(const char *sta, uint32_t vnet_hdr, int size) ": %s pkt->vnet_hdr_len = %u, pkt->size = %d"
# colo-compare.c
colo_compare_main(const char *chr) ": %s"
--
2.7.4
next prev parent reply other threads:[~2022-09-02 7:07 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-02 6:41 [PULL 00/21] Net patches Jason Wang
2022-09-02 6:41 ` [PULL 01/21] vdpa: Skip the maps not in the iova tree Jason Wang
2022-09-02 6:41 ` [PULL 02/21] vdpa: do not save failed dma maps in SVQ " Jason Wang
2022-09-02 6:41 ` [PULL 03/21] util: accept iova_tree_remove_parameter by value Jason Wang
2022-09-02 6:41 ` [PULL 04/21] vdpa: Remove SVQ vring from iova_tree at shutdown Jason Wang
2022-09-02 6:41 ` [PULL 05/21] vdpa: Make SVQ vring unmapping return void Jason Wang
2022-09-02 6:41 ` [PULL 06/21] vhost: Always store new kick fd on vhost_svq_set_svq_kick_fd Jason Wang
2022-09-02 6:41 ` [PULL 07/21] vdpa: Use ring hwaddr at vhost_vdpa_svq_unmap_ring Jason Wang
2022-09-02 6:41 ` [PULL 08/21] vhost: stop transfer elem ownership in vhost_handle_guest_kick Jason Wang
2022-09-02 6:41 ` [PULL 09/21] vhost: use SVQ element ndescs instead of opaque data for desc validation Jason Wang
2022-09-02 6:41 ` [PULL 10/21] vhost: Delete useless read memory barrier Jason Wang
2022-09-02 6:41 ` [PULL 11/21] vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush Jason Wang
2022-09-02 6:41 ` [PULL 12/21] vhost_net: Add NetClientInfo start callback Jason Wang
2022-09-02 6:41 ` [PULL 13/21] vhost_net: Add NetClientInfo stop callback Jason Wang
2022-09-02 6:41 ` [PULL 14/21] vdpa: add net_vhost_vdpa_cvq_info NetClientInfo Jason Wang
2022-09-02 6:41 ` [PULL 15/21] vdpa: Move command buffers map to start of net device Jason Wang
2022-09-02 6:41 ` [PULL 16/21] vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail Jason Wang
2022-09-02 6:41 ` [PULL 17/21] vhost_net: add NetClientState->load() callback Jason Wang
2022-09-02 6:41 ` [PULL 18/21] vdpa: Add virtio-net mac address via CVQ at start Jason Wang
2022-09-02 6:41 ` [PULL 19/21] vdpa: Delete CVQ migration blocker Jason Wang
2022-09-02 6:41 ` Jason Wang [this message]
2022-09-02 6:41 ` [PULL 21/21] net: tulip: Restrict DMA engine to memories Jason Wang
2022-09-02 20:33 ` [PULL 00/21] Net patches Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220902064138.56468-21-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=chen.zhang@intel.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).