qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org, Peter Maydell <peter.maydell@linaro.org>
Subject: [PULL 13/20] target/arm: Honour MDCR_EL2.HPMD in Secure EL2
Date: Wed, 14 Sep 2022 12:52:10 +0100	[thread overview]
Message-ID: <20220914115217.117532-15-richard.henderson@linaro.org> (raw)
In-Reply-To: <20220914115217.117532-1-richard.henderson@linaro.org>

From: Peter Maydell <peter.maydell@linaro.org>

The logic in pmu_counter_enabled() for handling the 'prohibit event
counting' bits MDCR_EL2.HPMD and MDCR_EL3.SPME is written in a way
that assumes that EL2 is never Secure.  This used to be true, but the
architecture now permits Secure EL2, and QEMU can emulate this.

Refactor the prohibit logic so that we effectively OR together
the various prohibit bits when they apply, rather than trying to
construct an if-else ladder where any particular state of the CPU
ends up in exactly one branch of the ladder.

This fixes the Secure EL2 case and also is a better structure for
adding the PMUv8.5 bits MDCR_EL2.HCCD and MDCR_EL3.SCCD.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822132358.3524971-6-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/helper.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index f1b20de16d..b792694df0 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -1094,7 +1094,7 @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
 {
     uint64_t filter;
     bool e, p, u, nsk, nsu, nsh, m;
-    bool enabled, prohibited, filtered;
+    bool enabled, prohibited = false, filtered;
     bool secure = arm_is_secure(env);
     int el = arm_current_el(env);
     uint64_t mdcr_el2 = arm_mdcr_el2_eff(env);
@@ -1112,15 +1112,12 @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
     }
     enabled = e && (env->cp15.c9_pmcnten & (1 << counter));
 
-    if (!secure) {
-        if (el == 2 && (counter < hpmn || counter == 31)) {
-            prohibited = mdcr_el2 & MDCR_HPMD;
-        } else {
-            prohibited = false;
-        }
-    } else {
-        prohibited = arm_feature(env, ARM_FEATURE_EL3) &&
-           !(env->cp15.mdcr_el3 & MDCR_SPME);
+    /* Is event counting prohibited? */
+    if (el == 2 && (counter < hpmn || counter == 31)) {
+        prohibited = mdcr_el2 & MDCR_HPMD;
+    }
+    if (secure) {
+        prohibited = prohibited || !(env->cp15.mdcr_el3 & MDCR_SPME);
     }
 
     if (prohibited && counter == 31) {
-- 
2.34.1



  parent reply	other threads:[~2022-09-14 12:55 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-14 11:51 [PULL 00/20] target-arm.next patch queue Richard Henderson
2022-09-14 11:51 ` [PULL 01/20] target/arm: Add cortex-a35 Richard Henderson
2022-09-14 11:51 ` [PATCH] target/arm: Do alignment check when translation disabled Richard Henderson
2022-09-22 15:31   ` Peter Maydell
2022-09-28 15:52     ` Richard Henderson
2022-09-14 11:51 ` [PULL 02/20] hw/arm/bcm2835_property: Add support for RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS Richard Henderson
2022-09-14 11:52 ` [PULL 03/20] target/arm: Make cpregs 0, c0, c{3-15}, {0-7} correctly RAZ in v8 Richard Henderson
2022-09-14 11:52 ` [PULL 04/20] target/arm: Sort KVM reads of AArch32 ID registers into encoding order Richard Henderson
2022-09-14 11:52 ` [PULL 05/20] target/arm: Implement ID_MMFR5 Richard Henderson
2022-09-14 11:52 ` [PULL 06/20] target/arm: Implement ID_DFR1 Richard Henderson
2022-09-14 11:52 ` [PULL 07/20] target/arm: Advertise FEAT_ETS for '-cpu max' Richard Henderson
2022-09-14 11:52 ` [PULL 08/20] target/arm: Add missing space in comment Richard Henderson
2022-09-14 11:52 ` [PULL 09/20] target/arm: Don't corrupt high half of PMOVSR when cycle counter overflows Richard Henderson
2022-09-14 11:52 ` [PULL 10/20] target/arm: Correct value returned by pmu_counter_mask() Richard Henderson
2022-09-14 11:52 ` [PULL 11/20] target/arm: Don't mishandle count when enabling or disabling PMU counters Richard Henderson
2022-09-20 16:45   ` Thomas Huth
2022-09-23 10:50     ` Peter Maydell
2022-09-14 11:52 ` [PULL 12/20] target/arm: Ignore PMCR.D when PMCR.LC is set Richard Henderson
2022-09-14 11:52 ` Richard Henderson [this message]
2022-09-14 11:52 ` [PULL 14/20] target/arm: Detect overflow when calculating next PMU interrupt Richard Henderson
2022-09-14 11:52 ` [PULL 15/20] target/arm: Rename pmu_8_n feature test functions Richard Henderson
2022-09-14 11:52 ` [PULL 16/20] target/arm: Implement FEAT_PMUv3p5 cycle counter disable bits Richard Henderson
2022-09-14 11:52 ` [PULL 17/20] target/arm: Support 64-bit event counters for FEAT_PMUv3p5 Richard Henderson
2022-09-14 11:52 ` [PULL 18/20] target/arm: Report FEAT_PMUv3p5 for TCG '-cpu max' Richard Henderson
2022-09-14 11:52 ` [PULL 19/20] target/arm: Remove useless TARGET_BIG_ENDIAN check in armv7m_load_kernel() Richard Henderson
2022-09-14 11:52 ` [PULL 20/20] target/arm: Make boards pass base address to armv7m_load_kernel() Richard Henderson
2022-09-17 20:13 ` [PULL 00/20] target-arm.next patch queue Stefan Hajnoczi
2022-09-20 13:06   ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220914115217.117532-15-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).