qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, stefanha@redhat.com, qemu-devel@nongnu.org
Subject: [PULL 17/18] tests/qtest/ide-test: Verify that DIAGNOSTIC clears DEV to zero
Date: Fri, 30 Sep 2022 18:52:21 +0200	[thread overview]
Message-ID: <20220930165222.249716-18-kwolf@redhat.com> (raw)
In-Reply-To: <20220930165222.249716-1-kwolf@redhat.com>

From: Lev Kujawski <lkujaw@member.fsf.org>

Verify correction of EXECUTE DEVICE DIAGNOSTIC introduced in commit
72423831c3 (hw/ide/core: Clear LBA and drive bits for EXECUTE DEVICE
DIAGNOSTIC, 2022-05-28).

Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707031140.158958-4-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 tests/qtest/ide-test.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/tests/qtest/ide-test.c b/tests/qtest/ide-test.c
index 93b4416023..dbe1563b23 100644
--- a/tests/qtest/ide-test.c
+++ b/tests/qtest/ide-test.c
@@ -90,6 +90,7 @@ enum {
 
 enum {
     CMD_DSM         = 0x06,
+    CMD_DIAGNOSE    = 0x90,
     CMD_READ_DMA    = 0xc8,
     CMD_WRITE_DMA   = 0xca,
     CMD_FLUSH_CACHE = 0xe7,
@@ -614,6 +615,36 @@ static void test_identify(void)
     free_pci_device(dev);
 }
 
+static void test_diagnostic(void)
+{
+    QTestState *qts;
+    QPCIDevice *dev;
+    QPCIBar bmdma_bar, ide_bar;
+    uint8_t data;
+
+    qts = ide_test_start(
+        "-blockdev driver=file,node-name=hda,filename=%s "
+        "-blockdev driver=file,node-name=hdb,filename=%s "
+        "-device ide-hd,drive=hda,bus=ide.0,unit=0 "
+        "-device ide-hd,drive=hdb,bus=ide.0,unit=1 ",
+        tmp_path[0], tmp_path[1]);
+
+    dev = get_pci_device(qts, &bmdma_bar, &ide_bar);
+
+    /* DIAGNOSE command on device 1 */
+    qpci_io_writeb(dev, ide_bar, reg_device, DEV);
+    data = qpci_io_readb(dev, ide_bar, reg_device);
+    g_assert_cmphex(data & DEV, ==, DEV);
+    qpci_io_writeb(dev, ide_bar, reg_command, CMD_DIAGNOSE);
+
+    /* Verify that DEVICE is now 0 */
+    data = qpci_io_readb(dev, ide_bar, reg_device);
+    g_assert_cmphex(data & DEV, ==, 0);
+
+    ide_test_quit(qts);
+    free_pci_device(dev);
+}
+
 /*
  * Write sector 1 with random data to make IDE storage dirty
  * Needed for flush tests so that flushes actually go though the block layer
@@ -1050,6 +1081,8 @@ int main(int argc, char **argv)
 
     qtest_add_func("/ide/identify", test_identify);
 
+    qtest_add_func("/ide/diagnostic", test_diagnostic);
+
     qtest_add_func("/ide/bmdma/simple_rw", test_bmdma_simple_rw);
     qtest_add_func("/ide/bmdma/trim", test_bmdma_trim);
     qtest_add_func("/ide/bmdma/various_prdts", test_bmdma_various_prdts);
-- 
2.37.3



  parent reply	other threads:[~2022-09-30 17:07 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-30 16:52 [PULL 00/18] Block layer patches Kevin Wolf
2022-09-30 16:52 ` [PULL 01/18] qcow2: fix memory leak in qcow2_read_extensions Kevin Wolf
2022-09-30 16:52 ` [PULL 02/18] block/qcow2-bitmap: Add missing cast to silent GCC error Kevin Wolf
2022-09-30 16:52 ` [PULL 03/18] qemu-img: Wean documentation and help output off '?' for help Kevin Wolf
2022-09-30 16:52 ` [PULL 04/18] block: pass OnOffAuto instead of bool to block_acct_setup() Kevin Wolf
2022-09-30 16:52 ` [PULL 05/18] block: add missed block_acct_setup with new block device init procedure Kevin Wolf
2022-09-30 16:52 ` [PULL 06/18] block: use bdrv_is_sg() helper instead of raw bs->sg reading Kevin Wolf
2022-09-30 16:52 ` [PULL 07/18] block: make serializing requests functions 'void' Kevin Wolf
2022-09-30 16:52 ` [PULL 08/18] gluster: stop using .bdrv_needs_filename Kevin Wolf
2022-09-30 16:52 ` [PULL 09/18] block/qcow2: Keep auto_backing_file if possible Kevin Wolf
2022-09-30 16:52 ` [PULL 10/18] block/qed: " Kevin Wolf
2022-09-30 16:52 ` [PULL 11/18] iotests/backing-file-invalidation: Add new test Kevin Wolf
2022-09-30 16:52 ` [PULL 12/18] block: move bdrv_qiov_is_aligned to file-posix Kevin Wolf
2022-09-30 16:52 ` [PULL 13/18] block: use the request length for iov alignment Kevin Wolf
2022-09-30 16:52 ` [PULL 14/18] piix_ide_reset: Use pci_set_* functions instead of direct access Kevin Wolf
2022-09-30 16:52 ` [PULL 15/18] tests/qtest/ide-test.c: Create disk image for use as a secondary Kevin Wolf
2022-09-30 16:52 ` [PULL 16/18] hw/ide/core: Clear LBA and drive bits for EXECUTE DEVICE DIAGNOSTIC Kevin Wolf
2022-09-30 16:52 ` Kevin Wolf [this message]
2022-09-30 16:52 ` [PULL 18/18] hw/ide/core.c: Implement ATA INITIALIZE_DEVICE_PARAMETERS command Kevin Wolf
2022-10-03 23:02 ` [PULL 00/18] Block layer patches Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220930165222.249716-18-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).