From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, stefanha@redhat.com, qemu-devel@nongnu.org
Subject: [PULL 06/18] block: use bdrv_is_sg() helper instead of raw bs->sg reading
Date: Fri, 30 Sep 2022 18:52:10 +0200 [thread overview]
Message-ID: <20220930165222.249716-7-kwolf@redhat.com> (raw)
In-Reply-To: <20220930165222.249716-1-kwolf@redhat.com>
From: "Denis V. Lunev" <den@openvz.org>
I believe that if the helper exists, it must be used always for reading
of the value. It breaks expectations in the other case.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <fam@euphon.net>
CC: Ronnie Sahlberg <ronniesahlberg@gmail.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220817083736.40981-2-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/file-posix.c | 2 +-
block/iscsi.c | 2 +-
block/raw-format.c | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/block/file-posix.c b/block/file-posix.c
index 48cd096624..256de1f456 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -1295,7 +1295,7 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
}
#endif
- if (bs->sg || S_ISBLK(st.st_mode)) {
+ if (bdrv_is_sg(bs) || S_ISBLK(st.st_mode)) {
int ret = hdev_get_max_hw_transfer(s->fd, &st);
if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
diff --git a/block/iscsi.c b/block/iscsi.c
index d707d0b354..612de127e5 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -2065,7 +2065,7 @@ static void iscsi_refresh_limits(BlockDriverState *bs, Error **errp)
uint64_t max_xfer_len = iscsilun->use_16_for_rw ? 0xffffffff : 0xffff;
unsigned int block_size = MAX(BDRV_SECTOR_SIZE, iscsilun->block_size);
- assert(iscsilun->block_size >= BDRV_SECTOR_SIZE || bs->sg);
+ assert(iscsilun->block_size >= BDRV_SECTOR_SIZE || bdrv_is_sg(bs));
bs->bl.request_alignment = block_size;
diff --git a/block/raw-format.c b/block/raw-format.c
index 69fd650eaf..c7278e348e 100644
--- a/block/raw-format.c
+++ b/block/raw-format.c
@@ -463,7 +463,7 @@ static int raw_open(BlockDriverState *bs, QDict *options, int flags,
return -EINVAL;
}
- bs->sg = bs->file->bs->sg;
+ bs->sg = bdrv_is_sg(bs->file->bs);
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
(BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
@@ -489,7 +489,7 @@ static int raw_open(BlockDriverState *bs, QDict *options, int flags,
return ret;
}
- if (bs->sg && (s->offset || s->has_size)) {
+ if (bdrv_is_sg(bs) && (s->offset || s->has_size)) {
error_setg(errp, "Cannot use offset/size with SCSI generic devices");
return -EINVAL;
}
--
2.37.3
next prev parent reply other threads:[~2022-09-30 16:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-30 16:52 [PULL 00/18] Block layer patches Kevin Wolf
2022-09-30 16:52 ` [PULL 01/18] qcow2: fix memory leak in qcow2_read_extensions Kevin Wolf
2022-09-30 16:52 ` [PULL 02/18] block/qcow2-bitmap: Add missing cast to silent GCC error Kevin Wolf
2022-09-30 16:52 ` [PULL 03/18] qemu-img: Wean documentation and help output off '?' for help Kevin Wolf
2022-09-30 16:52 ` [PULL 04/18] block: pass OnOffAuto instead of bool to block_acct_setup() Kevin Wolf
2022-09-30 16:52 ` [PULL 05/18] block: add missed block_acct_setup with new block device init procedure Kevin Wolf
2022-09-30 16:52 ` Kevin Wolf [this message]
2022-09-30 16:52 ` [PULL 07/18] block: make serializing requests functions 'void' Kevin Wolf
2022-09-30 16:52 ` [PULL 08/18] gluster: stop using .bdrv_needs_filename Kevin Wolf
2022-09-30 16:52 ` [PULL 09/18] block/qcow2: Keep auto_backing_file if possible Kevin Wolf
2022-09-30 16:52 ` [PULL 10/18] block/qed: " Kevin Wolf
2022-09-30 16:52 ` [PULL 11/18] iotests/backing-file-invalidation: Add new test Kevin Wolf
2022-09-30 16:52 ` [PULL 12/18] block: move bdrv_qiov_is_aligned to file-posix Kevin Wolf
2022-09-30 16:52 ` [PULL 13/18] block: use the request length for iov alignment Kevin Wolf
2022-09-30 16:52 ` [PULL 14/18] piix_ide_reset: Use pci_set_* functions instead of direct access Kevin Wolf
2022-09-30 16:52 ` [PULL 15/18] tests/qtest/ide-test.c: Create disk image for use as a secondary Kevin Wolf
2022-09-30 16:52 ` [PULL 16/18] hw/ide/core: Clear LBA and drive bits for EXECUTE DEVICE DIAGNOSTIC Kevin Wolf
2022-09-30 16:52 ` [PULL 17/18] tests/qtest/ide-test: Verify that DIAGNOSTIC clears DEV to zero Kevin Wolf
2022-09-30 16:52 ` [PULL 18/18] hw/ide/core.c: Implement ATA INITIALIZE_DEVICE_PARAMETERS command Kevin Wolf
2022-10-03 23:02 ` [PULL 00/18] Block layer patches Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220930165222.249716-7-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).