From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Subject: [PATCH v3 39/42] target/arm: Don't shift attrs in get_phys_addr_lpae
Date: Sat, 1 Oct 2022 09:23:15 -0700 [thread overview]
Message-ID: <20221001162318.153420-40-richard.henderson@linaro.org> (raw)
In-Reply-To: <20221001162318.153420-1-richard.henderson@linaro.org>
Leave the upper and lower attributes in the place they originate
from in the descriptor. Shifting them around is confusing, since
one cannot read the bit numbers out of the manual. Also, new
attributes have been added which would alter the shifts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/ptw.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/target/arm/ptw.c b/target/arm/ptw.c
index 01a27b30fb..c68fd73617 100644
--- a/target/arm/ptw.c
+++ b/target/arm/ptw.c
@@ -1071,7 +1071,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
hwaddr descaddr, indexmask, indexmask_grainsize;
uint32_t tableattrs;
target_ulong page_size;
- uint32_t attrs;
+ uint64_t attrs;
int32_t stride;
int addrsize, inputsize, outputsize;
uint64_t tcr = regime_tcr(env, mmu_idx);
@@ -1341,49 +1341,48 @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
descaddr &= ~(page_size - 1);
descaddr |= (address & (page_size - 1));
/* Extract attributes from the descriptor */
- attrs = extract64(descriptor, 2, 10)
- | (extract64(descriptor, 52, 12) << 10);
+ attrs = descriptor & (MAKE_64BIT_MASK(2, 10) | MAKE_64BIT_MASK(52, 12));
if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) {
/* Stage 2 table descriptors do not include any attribute fields */
goto skip_attrs;
}
/* Merge in attributes from table descriptors */
- attrs |= nstable << 3; /* NS */
+ attrs |= nstable << 5; /* NS */
guarded = extract64(descriptor, 50, 1); /* GP */
if (param.hpd) {
/* HPD disables all the table attributes except NSTable. */
goto skip_attrs;
}
- attrs |= extract32(tableattrs, 0, 2) << 11; /* XN, PXN */
+ attrs |= extract64(tableattrs, 0, 2) << 53; /* XN, PXN */
/*
* The sense of AP[1] vs APTable[0] is reversed, as APTable[0] == 1
* means "force PL1 access only", which means forcing AP[1] to 0.
*/
- attrs &= ~(extract32(tableattrs, 2, 1) << 4); /* !APT[0] => AP[1] */
- attrs |= extract32(tableattrs, 3, 1) << 5; /* APT[1] => AP[2] */
+ attrs &= ~(extract64(tableattrs, 2, 1) << 6); /* !APT[0] => AP[1] */
+ attrs |= extract32(tableattrs, 3, 1) << 7; /* APT[1] => AP[2] */
skip_attrs:
/*
* Here descaddr is the final physical address, and attributes
* are all in attrs.
*/
- if ((attrs & (1 << 8)) == 0) {
+ if ((attrs & (1 << 10)) == 0) {
/* Access flag */
fi->type = ARMFault_AccessFlag;
goto do_fault;
}
- ap = extract32(attrs, 4, 2);
+ ap = extract32(attrs, 6, 2);
if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) {
ns = mmu_idx == ARMMMUIdx_Stage2;
- xn = extract32(attrs, 11, 2);
+ xn = extract64(attrs, 54, 2);
result->f.prot = get_S2prot(env, ap, xn, s1_is_el0);
} else {
- ns = extract32(attrs, 3, 1);
- xn = extract32(attrs, 12, 1);
- pxn = extract32(attrs, 11, 1);
+ ns = extract32(attrs, 5, 1);
+ xn = extract64(attrs, 54, 1);
+ pxn = extract64(attrs, 53, 1);
result->f.prot = get_S1prot(env, mmu_idx, aarch64, ap, ns, xn, pxn);
}
@@ -1408,10 +1407,10 @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) {
result->cacheattrs.is_s2_format = true;
- result->cacheattrs.attrs = extract32(attrs, 0, 4);
+ result->cacheattrs.attrs = extract32(attrs, 2, 4);
} else {
/* Index into MAIR registers for cache attributes */
- uint8_t attrindx = extract32(attrs, 0, 3);
+ uint8_t attrindx = extract32(attrs, 2, 3);
uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)];
assert(attrindx <= 7);
result->cacheattrs.is_s2_format = false;
@@ -1426,7 +1425,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
if (param.ds) {
result->cacheattrs.shareability = param.sh;
} else {
- result->cacheattrs.shareability = extract32(attrs, 6, 2);
+ result->cacheattrs.shareability = extract32(attrs, 8, 2);
}
result->f.phys_addr = descaddr;
--
2.34.1
next prev parent reply other threads:[~2022-10-01 17:04 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-01 16:22 [PATCH v3 00/42] target/arm: Implement FEAT_HAFDBS Richard Henderson
2022-10-01 16:22 ` [PATCH v3 01/42] target/arm: Split s2walk_secure from ipa_secure in get_phys_addr Richard Henderson
2022-10-06 14:27 ` Peter Maydell
2022-10-06 15:10 ` Richard Henderson
2022-10-06 15:22 ` Peter Maydell
2022-10-06 18:20 ` Richard Henderson
2022-10-06 18:55 ` Peter Maydell
2022-10-06 20:58 ` Richard Henderson
2022-10-07 13:50 ` Peter Maydell
2022-10-01 16:22 ` [PATCH v3 02/42] target/arm: Add is_secure parameter to get_phys_addr_lpae Richard Henderson
2022-10-01 16:22 ` [PATCH v3 03/42] target/arm: Fix S2 disabled check in S1_ptw_translate Richard Henderson
2022-10-06 14:28 ` Peter Maydell
2022-10-01 16:22 ` [PATCH v3 04/42] target/arm: Add is_secure parameter to regime_translation_disabled Richard Henderson
2022-10-01 16:22 ` [PATCH v3 05/42] target/arm: Split out get_phys_addr_with_secure Richard Henderson
2022-10-01 16:22 ` [PATCH v3 06/42] target/arm: Add is_secure parameter to v7m_read_half_insn Richard Henderson
2022-10-01 16:22 ` [PATCH v3 07/42] target/arm: Add TBFLAG_M32.SECURE Richard Henderson
2022-10-01 16:22 ` [PATCH v3 08/42] target/arm: Merge regime_is_secure into get_phys_addr Richard Henderson
2022-10-01 16:22 ` [PATCH v3 09/42] target/arm: Add is_secure parameter to do_ats_write Richard Henderson
2022-10-01 16:22 ` [PATCH v3 10/42] target/arm: Fold secure and non-secure a-profile mmu indexes Richard Henderson
2022-10-01 16:22 ` [PATCH v3 11/42] target/arm: Reorg regime_translation_disabled Richard Henderson
2022-10-01 16:22 ` [PATCH v3 12/42] target/arm: Drop secure check for HCR.TGE vs SCTLR_EL1.M Richard Henderson
2022-10-01 16:22 ` [PATCH v3 13/42] target/arm: Introduce arm_hcr_el2_eff_secstate Richard Henderson
2022-10-01 16:22 ` [PATCH v3 14/42] target/arm: Hoist read of *is_secure in S1_ptw_translate Richard Henderson
2022-10-01 16:22 ` [PATCH v3 15/42] target/arm: Remove env argument from combined_attrs_fwb Richard Henderson
2022-10-06 14:30 ` Peter Maydell
2022-10-01 16:22 ` [PATCH v3 16/42] target/arm: Pass HCR to attribute subroutines Richard Henderson
2022-10-01 16:22 ` [PATCH v3 17/42] target/arm: Fix ATS12NSO* from S PL1 Richard Henderson
2022-10-01 16:22 ` [PATCH v3 18/42] target/arm: Split out get_phys_addr_disabled Richard Henderson
2022-10-01 16:22 ` [PATCH v3 19/42] target/arm: Fix cacheattr in get_phys_addr_disabled Richard Henderson
2022-10-06 14:33 ` Peter Maydell
2022-10-01 16:22 ` [PATCH v3 20/42] target/arm: Use tlb_set_page_full Richard Henderson
2022-10-06 14:36 ` Peter Maydell
2022-10-01 16:22 ` [PATCH v3 21/42] target/arm: Enable TARGET_PAGE_ENTRY_EXTRA Richard Henderson
2022-10-06 14:44 ` Peter Maydell
2022-10-01 16:22 ` [PATCH v3 22/42] target/arm: Use probe_access_full for MTE Richard Henderson
2022-10-06 14:52 ` Peter Maydell
2022-10-01 16:22 ` [PATCH v3 23/42] target/arm: Use probe_access_full for BTI Richard Henderson
2022-10-06 14:57 ` Peter Maydell
2022-10-06 18:53 ` Richard Henderson
2022-10-01 16:23 ` [PATCH v3 24/42] target/arm: Add ARMMMUIdx_Phys_{S,NS} Richard Henderson
2022-10-06 15:29 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 25/42] target/arm: Move ARMMMUIdx_Stage2 to a real tlb mmu_idx Richard Henderson
2022-10-06 15:46 ` Peter Maydell
2022-10-06 19:21 ` Richard Henderson
2022-10-01 16:23 ` [PATCH v3 26/42] target/arm: Plumb debug into S1_ptw_translate Richard Henderson
2022-10-06 15:54 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 27/42] target/arm: Use softmmu tlbs for page table walking Richard Henderson
2022-10-07 9:01 ` Peter Maydell
2022-10-07 15:27 ` Richard Henderson
2022-10-07 16:08 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 28/42] target/arm: Split out get_phys_addr_twostage Richard Henderson
2022-10-06 16:00 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 29/42] target/arm: Use bool consistently for get_phys_addr subroutines Richard Henderson
2022-10-06 16:01 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 30/42] target/arm: Add ptw_idx argument to S1_ptw_translate Richard Henderson
2022-10-07 9:19 ` Peter Maydell
2022-10-07 15:34 ` Richard Henderson
2022-10-01 16:23 ` [PATCH v3 31/42] target/arm: Add isar predicates for FEAT_HAFDBS Richard Henderson
2022-10-07 9:21 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 32/42] target/arm: Extract HA and HD in aa64_va_parameters Richard Henderson
2022-10-07 9:24 ` Peter Maydell
2022-10-07 15:37 ` Richard Henderson
2022-10-07 16:11 ` Peter Maydell
2022-10-07 16:13 ` Richard Henderson
2022-10-07 16:23 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 33/42] target/arm: Split out S1TranslateResult type Richard Henderson
2022-10-07 9:27 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 34/42] target/arm: Move be test for regime into S1TranslateResult Richard Henderson
2022-10-07 9:29 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 35/42] target/arm: Move S1_ptw_translate outside arm_ld[lq]_ptw Richard Henderson
2022-10-07 9:33 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 36/42] target/arm: Add ARMFault_UnsuppAtomicUpdate Richard Henderson
2022-10-07 9:36 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 37/42] target/arm: Remove loop from get_phys_addr_lpae Richard Henderson
2022-10-07 10:20 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 38/42] target/arm: Fix fault reporting in get_phys_addr_lpae Richard Henderson
2022-10-07 10:26 ` Peter Maydell
2022-10-01 16:23 ` Richard Henderson [this message]
2022-10-07 10:35 ` [PATCH v3 39/42] target/arm: Don't shift attrs " Peter Maydell
2022-10-01 16:23 ` [PATCH v3 40/42] target/arm: Consider GP an attribute " Richard Henderson
2022-10-07 10:40 ` Peter Maydell
2022-10-01 16:23 ` [PATCH v3 41/42] target/arm: Implement FEAT_HAFDBS Richard Henderson
2022-10-07 13:47 ` Peter Maydell
2022-10-07 16:04 ` Peter Maydell
2022-10-07 16:45 ` Richard Henderson
2022-10-07 16:50 ` Peter Maydell
2022-10-07 17:35 ` Richard Henderson
2022-10-01 16:23 ` [PATCH v3 42/42] target/arm: Use the max page size in a 2-stage ptw Richard Henderson
2022-10-07 10:42 ` Peter Maydell
2022-10-10 13:10 ` [PATCH v3 00/42] target/arm: Implement FEAT_HAFDBS Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221001162318.153420-40-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).