From: Patrick Venture <venture@google.com>
To: hskinnemoen@google.com, kfting@nuvoton.com, peter.maydell@linaro.org
Cc: qemu-devel@nongnu.org, qemu-arm@nongnu.org, jasowang@redhat.com,
Patrick Venture <venture@google.com>,
Hao Wu <wuhaotsh@google.com>
Subject: [PATCH v2] hw/net: npcm7xx_emc: set MAC in register space
Date: Mon, 3 Oct 2022 10:38:10 -0700 [thread overview]
Message-ID: <20221003173810.1933849-1-venture@google.com> (raw)
The MAC address set from Qemu wasn't being saved into the register space.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
---
v2: only set the registers from qemu on reset
once registers set, only read and write to them
---
hw/net/npcm7xx_emc.c | 30 +++++++++++++++++++++++-------
1 file changed, 23 insertions(+), 7 deletions(-)
diff --git a/hw/net/npcm7xx_emc.c b/hw/net/npcm7xx_emc.c
index 7c86bb52e5..a33f8c7b23 100644
--- a/hw/net/npcm7xx_emc.c
+++ b/hw/net/npcm7xx_emc.c
@@ -112,6 +112,16 @@ static void emc_reset(NPCM7xxEMCState *emc)
emc->tx_active = false;
emc->rx_active = false;
+
+ /* Set the MAC address in the register space. */
+ uint32_t value = (emc->conf.macaddr.a[0] << 24) |
+ (emc->conf.macaddr.a[1] << 16) |
+ (emc->conf.macaddr.a[2] << 8) |
+ emc->conf.macaddr.a[3];
+ emc->regs[REG_CAMM_BASE] = value;
+
+ value = (emc->conf.macaddr.a[4] << 24) | (emc->conf.macaddr.a[5] << 16);
+ emc->regs[REG_CAML_BASE] = value;
}
static void npcm7xx_emc_reset(DeviceState *dev)
@@ -432,13 +442,25 @@ static bool emc_receive_filter1(NPCM7xxEMCState *emc, const uint8_t *buf,
}
case ETH_PKT_UCAST: {
bool matches;
+ uint32_t value;
+ struct MACAddr mac;
if (emc->regs[REG_CAMCMR] & REG_CAMCMR_AUP) {
return true;
}
+
+ value = emc->regs[REG_CAMM_BASE];
+ mac.a[0] = value >> 24;
+ mac.a[1] = value >> 16;
+ mac.a[2] = value >> 8;
+ mac.a[3] = value >> 0;
+ value = emc->regs[REG_CAML_BASE];
+ mac.a[4] = value >> 24;
+ mac.a[5] = value >> 16;
+
matches = ((emc->regs[REG_CAMCMR] & REG_CAMCMR_ECMP) &&
/* We only support one CAM register, CAM0. */
(emc->regs[REG_CAMEN] & (1 << 0)) &&
- memcmp(buf, emc->conf.macaddr.a, ETH_ALEN) == 0);
+ memcmp(buf, mac.a, ETH_ALEN) == 0);
if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) {
*fail_reason = "MACADDR matched, comparison complemented";
return !matches;
@@ -661,15 +683,9 @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset,
break;
case REG_CAMM_BASE + 0:
emc->regs[reg] = value;
- emc->conf.macaddr.a[0] = value >> 24;
- emc->conf.macaddr.a[1] = value >> 16;
- emc->conf.macaddr.a[2] = value >> 8;
- emc->conf.macaddr.a[3] = value >> 0;
break;
case REG_CAML_BASE + 0:
emc->regs[reg] = value;
- emc->conf.macaddr.a[4] = value >> 24;
- emc->conf.macaddr.a[5] = value >> 16;
break;
case REG_MCMDR: {
uint32_t prev;
--
2.38.0.rc1.362.ged0d419d3c-goog
next reply other threads:[~2022-10-03 17:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-03 17:38 Patrick Venture [this message]
2022-10-06 13:18 ` [PATCH v2] hw/net: npcm7xx_emc: set MAC in register space Peter Maydell
2023-04-25 20:49 ` Patrick Venture
2023-05-02 10:03 ` Peter Maydell
2023-04-25 23:48 ` Philippe Mathieu-Daudé via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221003173810.1933849-1-venture@google.com \
--to=venture@google.com \
--cc=hskinnemoen@google.com \
--cc=jasowang@redhat.com \
--cc=kfting@nuvoton.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=wuhaotsh@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).