From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>
Subject: [PULL 18/37] target/i386: Introduce DISAS_JUMP
Date: Tue, 11 Oct 2022 12:26:41 +0200 [thread overview]
Message-ID: <20221011102700.319178-19-pbonzini@redhat.com> (raw)
In-Reply-To: <20221011102700.319178-1-pbonzini@redhat.com>
From: Richard Henderson <richard.henderson@linaro.org>
Drop the unused dest argument to gen_jr().
Remove most of the calls to gen_jr, and use DISAS_JUMP.
Remove some unused loads of eip for lcall and ljmp.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221001140935.465607-14-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/tcg/translate.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c
index c8ef9f0356..7db6f617a1 100644
--- a/target/i386/tcg/translate.c
+++ b/target/i386/tcg/translate.c
@@ -135,6 +135,7 @@ typedef struct DisasContext {
#define DISAS_EOB_ONLY DISAS_TARGET_0
#define DISAS_EOB_NEXT DISAS_TARGET_1
#define DISAS_EOB_INHIBIT_IRQ DISAS_TARGET_2
+#define DISAS_JUMP DISAS_TARGET_3
/* The environment in which user-only runs is constrained. */
#ifdef CONFIG_USER_ONLY
@@ -222,7 +223,7 @@ STUB_HELPER(wrmsr, TCGv_env env)
#endif
static void gen_eob(DisasContext *s);
-static void gen_jr(DisasContext *s, TCGv dest);
+static void gen_jr(DisasContext *s);
static void gen_jmp(DisasContext *s, target_ulong eip);
static void gen_jmp_tb(DisasContext *s, target_ulong eip, int tb_num);
static void gen_op(DisasContext *s1, int op, MemOp ot, int d);
@@ -2385,7 +2386,7 @@ static void gen_goto_tb(DisasContext *s, int tb_num, target_ulong eip)
} else {
/* jump to another page */
gen_jmp_im(s, eip);
- gen_jr(s, s->tmp0);
+ gen_jr(s);
}
}
@@ -2754,7 +2755,7 @@ static void gen_eob(DisasContext *s)
}
/* Jump to register */
-static void gen_jr(DisasContext *s, TCGv dest)
+static void gen_jr(DisasContext *s)
{
do_gen_eob_worker(s, false, false, true);
}
@@ -5328,7 +5329,7 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
gen_push_v(s, s->T1);
gen_op_jmp_v(s->T0);
gen_bnd_jmp(s);
- gen_jr(s, s->T0);
+ s->base.is_jmp = DISAS_JUMP;
break;
case 3: /* lcall Ev */
if (mod == 3) {
@@ -5349,8 +5350,7 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
tcg_const_i32(dflag - 1),
tcg_const_i32(s->pc - s->cs_base));
}
- tcg_gen_ld_tl(s->tmp4, cpu_env, offsetof(CPUX86State, eip));
- gen_jr(s, s->tmp4);
+ s->base.is_jmp = DISAS_JUMP;
break;
case 4: /* jmp Ev */
if (dflag == MO_16) {
@@ -5358,7 +5358,7 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
}
gen_op_jmp_v(s->T0);
gen_bnd_jmp(s);
- gen_jr(s, s->T0);
+ s->base.is_jmp = DISAS_JUMP;
break;
case 5: /* ljmp Ev */
if (mod == 3) {
@@ -5376,8 +5376,7 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
gen_op_movl_seg_T0_vm(s, R_CS);
gen_op_jmp_v(s->T1);
}
- tcg_gen_ld_tl(s->tmp4, cpu_env, offsetof(CPUX86State, eip));
- gen_jr(s, s->tmp4);
+ s->base.is_jmp = DISAS_JUMP;
break;
case 6: /* push Ev */
gen_push_v(s, s->T0);
@@ -6808,7 +6807,7 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
/* Note that gen_pop_T0 uses a zero-extending load. */
gen_op_jmp_v(s->T0);
gen_bnd_jmp(s);
- gen_jr(s, s->T0);
+ s->base.is_jmp = DISAS_JUMP;
break;
case 0xc3: /* ret */
ot = gen_pop_T0(s);
@@ -6816,7 +6815,7 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
/* Note that gen_pop_T0 uses a zero-extending load. */
gen_op_jmp_v(s->T0);
gen_bnd_jmp(s);
- gen_jr(s, s->T0);
+ s->base.is_jmp = DISAS_JUMP;
break;
case 0xca: /* lret im */
val = x86_ldsw_code(env, s);
@@ -8846,6 +8845,9 @@ static void i386_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu)
gen_update_eip_cur(dc);
gen_eob_inhibit_irq(dc, true);
break;
+ case DISAS_JUMP:
+ gen_jr(dc);
+ break;
default:
g_assert_not_reached();
}
--
2.37.3
next prev parent reply other threads:[~2022-10-11 10:57 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-11 10:26 [PULL 00/37] SCSI, i386 patches for 2022-10-11 Paolo Bonzini
2022-10-11 10:26 ` [PULL 01/37] scsi-disk: support setting CD-ROM block size via device options Paolo Bonzini
2022-10-11 10:26 ` [PULL 02/37] i386: kvm: extend kvm_{get, put}_vcpu_events to support pending triple fault Paolo Bonzini
2022-10-11 10:26 ` [PULL 03/37] kvm: allow target-specific accelerator properties Paolo Bonzini
2022-10-11 10:26 ` [PULL 04/37] kvm: expose struct KVMState Paolo Bonzini
2022-10-11 10:26 ` [PULL 05/37] i386: add notify VM exit support Paolo Bonzini
2022-10-11 10:26 ` [PULL 06/37] target/i386: Remove pc_start Paolo Bonzini
2022-10-11 10:26 ` [PULL 07/37] target/i386: Return bool from disas_insn Paolo Bonzini
2022-10-11 10:26 ` [PULL 08/37] target/i386: Remove cur_eip argument to gen_exception Paolo Bonzini
2022-10-11 10:26 ` [PULL 09/37] target/i386: Remove cur_eip, next_eip arguments to gen_interrupt Paolo Bonzini
2022-10-11 10:26 ` [PULL 10/37] target/i386: Create gen_update_eip_cur Paolo Bonzini
2022-10-11 10:26 ` [PULL 11/37] target/i386: Create gen_update_eip_next Paolo Bonzini
2022-10-11 10:26 ` [PULL 12/37] target/i386: Introduce DISAS_EOB* Paolo Bonzini
2022-10-11 10:26 ` [PULL 13/37] target/i386: Use DISAS_EOB* in gen_movl_seg_T0 Paolo Bonzini
2022-10-11 10:26 ` [PULL 14/37] target/i386: Use DISAS_EOB_NEXT Paolo Bonzini
2022-10-11 10:26 ` [PULL 15/37] target/i386: USe DISAS_EOB_ONLY Paolo Bonzini
2022-10-11 10:26 ` [PULL 16/37] target/i386: Create cur_insn_len, cur_insn_len_i32 Paolo Bonzini
2022-10-11 10:26 ` [PULL 17/37] target/i386: Remove cur_eip, next_eip arguments to gen_repz* Paolo Bonzini
2022-10-11 10:26 ` Paolo Bonzini [this message]
2022-10-11 10:26 ` [PULL 19/37] target/i386: Truncate values for lcall_real to i32 Paolo Bonzini
2022-10-11 10:26 ` [PULL 20/37] target/i386: Create eip_next_* Paolo Bonzini
2022-10-11 10:26 ` [PULL 21/37] target/i386: Use DISAS_TOO_MANY to exit after gen_io_start Paolo Bonzini
2022-10-11 10:26 ` [PULL 22/37] target/i386: Create gen_jmp_rel Paolo Bonzini
2022-10-11 10:26 ` [PULL 23/37] target/i386: Use gen_jmp_rel for loop, repz, jecxz insns Paolo Bonzini
2022-10-11 10:26 ` [PULL 24/37] target/i386: Use gen_jmp_rel for gen_jcc Paolo Bonzini
2022-10-11 10:26 ` [PULL 25/37] target/i386: Use gen_jmp_rel for DISAS_TOO_MANY Paolo Bonzini
2022-10-11 10:26 ` [PULL 26/37] target/i386: Remove MemOp argument to gen_op_j*_ecx Paolo Bonzini
2022-10-11 10:26 ` [PULL 27/37] target/i386: Merge gen_jmp_tb and gen_goto_tb into gen_jmp_rel Paolo Bonzini
2022-10-11 10:26 ` [PULL 28/37] target/i386: Create eip_cur_tl Paolo Bonzini
2022-10-11 10:26 ` [PULL 29/37] target/i386: Add cpu_eip Paolo Bonzini
2022-10-11 10:26 ` [PULL 30/37] target/i386: Inline gen_jmp_im Paolo Bonzini
2022-10-11 10:26 ` [PULL 31/37] target/i386: Enable TARGET_TB_PCREL Paolo Bonzini
2022-10-11 10:26 ` [PULL 32/37] x86: Implement MSR_CORE_THREAD_COUNT MSR Paolo Bonzini
2022-10-11 10:26 ` [PULL 33/37] i386: kvm: Add support for MSR filtering Paolo Bonzini
2022-10-11 10:26 ` [PULL 34/37] KVM: x86: Implement MSR_CORE_THREAD_COUNT MSR Paolo Bonzini
2022-10-11 10:26 ` [PULL 35/37] linux-user: i386/signal: move fpstate at the end of the 32-bit frames Paolo Bonzini
2022-10-11 10:26 ` [PULL 36/37] linux-user: i386/signal: support FXSAVE fpstate on 32-bit emulation Paolo Bonzini
2022-10-11 10:27 ` [PULL 37/37] linux-user: i386/signal: support XSAVE/XRSTOR for signal frame fpstate Paolo Bonzini
2022-10-13 20:29 ` [PULL 00/37] SCSI, i386 patches for 2022-10-11 Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221011102700.319178-19-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).