From: Daniel Henrique Barboza <danielhb413@gmail.com>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, stefanha@redhat.com,
BALATON Zoltan <balaton@eik.bme.hu>,
Daniel Henrique Barboza <danielhb413@gmail.com>
Subject: [PULL 13/38] ppc440_sdram: Get rid of the init RAM hack
Date: Mon, 17 Oct 2022 16:19:44 -0300 [thread overview]
Message-ID: <20221017192009.92404-14-danielhb413@gmail.com> (raw)
In-Reply-To: <20221017192009.92404-1-danielhb413@gmail.com>
From: BALATON Zoltan <balaton@eik.bme.hu>
Remove the do_init parameter of ppc440_sdram_init and enable SDRAM
controller from the board. Firmware does this so it may only be needed
when booting with -kernel without firmware but we enable SDRAM
unconditionally to preserve previous behaviour.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <c2eda8f83c82f655aa7821a5a8c9310484bd6a1d.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
hw/ppc/ppc440.h | 3 +--
hw/ppc/ppc440_uc.c | 15 +++++++++------
hw/ppc/sam460ex.c | 4 +++-
include/hw/ppc/ppc4xx.h | 2 ++
4 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/hw/ppc/ppc440.h b/hw/ppc/ppc440.h
index e6c905b7d6..01d76b8000 100644
--- a/hw/ppc/ppc440.h
+++ b/hw/ppc/ppc440.h
@@ -17,8 +17,7 @@ void ppc4xx_l2sram_init(CPUPPCState *env);
void ppc4xx_cpr_init(CPUPPCState *env);
void ppc4xx_sdr_init(CPUPPCState *env);
void ppc440_sdram_init(CPUPPCState *env, int nbanks,
- Ppc4xxSdramBank *ram_banks,
- int do_init);
+ Ppc4xxSdramBank *ram_banks);
void ppc4xx_ahb_init(CPUPPCState *env);
void ppc4xx_dma_init(CPUPPCState *env, int dcr_base);
void ppc460ex_pcie_init(CPUPPCState *env);
diff --git a/hw/ppc/ppc440_uc.c b/hw/ppc/ppc440_uc.c
index 3fbfe4ad13..e8bc088c8f 100644
--- a/hw/ppc/ppc440_uc.c
+++ b/hw/ppc/ppc440_uc.c
@@ -16,6 +16,7 @@
#include "qemu/module.h"
#include "hw/irq.h"
#include "exec/memory.h"
+#include "cpu.h"
#include "hw/ppc/ppc4xx.h"
#include "hw/qdev-properties.h"
#include "hw/pci/pci.h"
@@ -727,12 +728,11 @@ static void sdram_reset(void *opaque)
ppc440_sdram_t *sdram = opaque;
sdram->addr = 0;
- sdram->mcopt2 = SDRAM_DDR2_MCOPT2_DCEN;
+ sdram->mcopt2 = 0;
}
void ppc440_sdram_init(CPUPPCState *env, int nbanks,
- Ppc4xxSdramBank *ram_banks,
- int do_init)
+ Ppc4xxSdramBank *ram_banks)
{
ppc440_sdram_t *sdram;
int i;
@@ -749,9 +749,6 @@ void ppc440_sdram_init(CPUPPCState *env, int nbanks,
sdram, &dcr_read_sdram, &dcr_write_sdram);
ppc_dcr_register(env, SDRAM0_CFGDATA,
sdram, &dcr_read_sdram, &dcr_write_sdram);
- if (do_init) {
- sdram_map_bcr(sdram);
- }
ppc_dcr_register(env, SDRAM_R0BAS,
sdram, &dcr_read_sdram, &dcr_write_sdram);
@@ -773,6 +770,12 @@ void ppc440_sdram_init(CPUPPCState *env, int nbanks,
sdram, &dcr_read_sdram, &dcr_write_sdram);
}
+void ppc440_sdram_enable(CPUPPCState *env)
+{
+ ppc_dcr_write(env->dcr_env, SDRAM0_CFGADDR, 0x21);
+ ppc_dcr_write(env->dcr_env, SDRAM0_CFGDATA, 0x08000000);
+}
+
/*****************************************************************************/
/* PLB to AHB bridge */
enum {
diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
index f4c2a693fb..9c01211b20 100644
--- a/hw/ppc/sam460ex.c
+++ b/hw/ppc/sam460ex.c
@@ -345,7 +345,9 @@ static void sam460ex_init(MachineState *machine)
ppc4xx_sdram_banks(machine->ram, 1, ram_banks, ppc460ex_sdram_bank_sizes);
/* FIXME: does 460EX have ECC interrupts? */
- ppc440_sdram_init(env, 1, ram_banks, 1);
+ ppc440_sdram_init(env, 1, ram_banks);
+ /* Enable SDRAM memory regions as we may boot without firmware */
+ ppc440_sdram_enable(env);
/* IIC controllers and devices */
dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700,
diff --git a/include/hw/ppc/ppc4xx.h b/include/hw/ppc/ppc4xx.h
index 558500fb97..78a845399e 100644
--- a/include/hw/ppc/ppc4xx.h
+++ b/include/hw/ppc/ppc4xx.h
@@ -37,6 +37,8 @@ typedef struct {
uint32_t bcr;
} Ppc4xxSdramBank;
+void ppc440_sdram_enable(CPUPPCState *env);
+
void ppc4xx_sdram_banks(MemoryRegion *ram, int nr_banks,
Ppc4xxSdramBank ram_banks[],
const ram_addr_t sdram_bank_sizes[]);
--
2.37.3
next prev parent reply other threads:[~2022-10-17 19:44 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-17 19:19 [PULL 00/38] ppc queue Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 01/38] MAINTAINERS: step back from PPC Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 02/38] target/ppc: restore powerpc_excp_booke doorbell interrupts Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 03/38] ppc440_bamboo: Remove unnecessary memsets Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 04/38] ppc4xx: Introduce Ppc4xxSdramBank struct Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 05/38] ppc4xx_sdram: Get rid of the init RAM hack Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 06/38] ppc4xx: Use Ppc4xxSdramBank in ppc4xx_sdram_banks() Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 07/38] ppc440_bamboo: Add missing 4 MiB valid memory size Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 08/38] ppc4xx_sdram: Move size check to ppc4xx_sdram_init() Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 09/38] ppc4xx_sdram: QOM'ify Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 10/38] ppc4xx_sdram: Drop extra zeros for readability Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 11/38] ppc440_sdram: Split off map/unmap of sdram banks for later reuse Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 12/38] ppc440_sdram: Implement enable bit in the DDR2 SDRAM controller Daniel Henrique Barboza
2022-10-17 19:19 ` Daniel Henrique Barboza [this message]
2022-10-17 19:19 ` [PULL 14/38] ppc440_sdram: Rename local variable for readability Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 15/38] ppc4xx_sdram: Rename functions to prevent name clashes Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 16/38] ppc440_sdram: Move RAM size check to ppc440_sdram_init Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 17/38] ppc440_sdram: QOM'ify Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 18/38] ppc440_uc.c: Move some macros to ppc4xx.h Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 19/38] ppc440_uc.c: Remove unneeded parenthesis Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 20/38] hw/ppc/meson: Allow e500 boards to be enabled separately Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 21/38] hw/gpio/meson: Introduce dedicated config switch for hw/gpio/mpc8xxx Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 22/38] docs/system/ppc/ppce500: Add heading for networking chapter Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 23/38] hw/ppc/e500: Reduce usage of sysbus API Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 24/38] hw/ppc/mpc8544ds: Rename wrongly named method Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 25/38] hw/ppc/mpc8544ds: Add platform bus Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 26/38] hw/ppc/e500: Remove if statement which is now always true Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 27/38] target/ppc: Fix xvcmp* clearing FI bit Daniel Henrique Barboza
2022-10-17 19:19 ` [PULL 28/38] hw/ppc/spapr_pci.c: Use device_cold_reset() rather than device_legacy_reset() Daniel Henrique Barboza
2022-10-17 19:20 ` [PULL 29/38] qmp/hmp, device_tree.c: introduce dumpdtb Daniel Henrique Barboza
2022-10-17 19:20 ` [PULL 30/38] hw/nios2: set machine->fdt in nios2_load_dtb() Daniel Henrique Barboza
2022-10-17 19:20 ` [PULL 31/38] hw/ppc: set machine->fdt in bamboo_load_device_tree() Daniel Henrique Barboza
2022-10-17 19:20 ` [PULL 32/38] hw/ppc: set machine->fdt in sam460ex_load_device_tree() Daniel Henrique Barboza
2022-10-17 19:20 ` [PULL 33/38] hw/ppc: set machine->fdt in xilinx_load_device_tree() Daniel Henrique Barboza
2022-10-17 19:20 ` [PULL 34/38] hw/ppc: set machine->fdt in pegasos2_machine_reset() Daniel Henrique Barboza
2022-10-17 19:20 ` [PULL 35/38] hw/ppc: set machine->fdt in pnv_reset() Daniel Henrique Barboza
2022-10-17 19:20 ` [PULL 36/38] hw/ppc: set machine->fdt in spapr machine Daniel Henrique Barboza
2022-10-17 19:20 ` [PULL 37/38] hw/riscv: set machine->fdt in sifive_u_machine_init() Daniel Henrique Barboza
2022-10-17 19:20 ` [PULL 38/38] hw/riscv: set machine->fdt in spike_board_init() Daniel Henrique Barboza
2022-10-18 20:01 ` [PULL 00/38] ppc queue Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221017192009.92404-14-danielhb413@gmail.com \
--to=danielhb413@gmail.com \
--cc=balaton@eik.bme.hu \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).