qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>
Subject: [PULL 13/53] target/i386: Add MMU_PHYS_IDX and MMU_NESTED_IDX
Date: Tue, 18 Oct 2022 15:30:02 +0200	[thread overview]
Message-ID: <20221018133042.856368-14-pbonzini@redhat.com> (raw)
In-Reply-To: <20221018133042.856368-1-pbonzini@redhat.com>

From: Richard Henderson <richard.henderson@linaro.org>

These new mmu indexes will be helpful for improving
paging and code throughout the target.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-6-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 target/i386/cpu-param.h              |  2 +-
 target/i386/cpu.h                    |  3 +
 target/i386/tcg/sysemu/excp_helper.c | 82 ++++++++++++++++++----------
 target/i386/tcg/sysemu/svm_helper.c  |  3 +
 4 files changed, 60 insertions(+), 30 deletions(-)

diff --git a/target/i386/cpu-param.h b/target/i386/cpu-param.h
index 1e79389761..f579b16bd2 100644
--- a/target/i386/cpu-param.h
+++ b/target/i386/cpu-param.h
@@ -23,7 +23,7 @@
 # define TARGET_VIRT_ADDR_SPACE_BITS  32
 #endif
 #define TARGET_PAGE_BITS 12
-#define NB_MMU_MODES 3
+#define NB_MMU_MODES 5
 
 #ifndef CONFIG_USER_ONLY
 # define TARGET_TB_PCREL 1
diff --git a/target/i386/cpu.h b/target/i386/cpu.h
index 4d21c5759d..3573107356 100644
--- a/target/i386/cpu.h
+++ b/target/i386/cpu.h
@@ -2149,6 +2149,9 @@ uint64_t cpu_get_tsc(CPUX86State *env);
 #define MMU_KSMAP_IDX   0
 #define MMU_USER_IDX    1
 #define MMU_KNOSMAP_IDX 2
+#define MMU_NESTED_IDX  3
+#define MMU_PHYS_IDX    4
+
 static inline int cpu_mmu_index(CPUX86State *env, bool ifetch)
 {
     return (env->hflags & HF_CPL_MASK) == 3 ? MMU_USER_IDX :
diff --git a/target/i386/tcg/sysemu/excp_helper.c b/target/i386/tcg/sysemu/excp_helper.c
index 816b307547..494dc6d00c 100644
--- a/target/i386/tcg/sysemu/excp_helper.c
+++ b/target/i386/tcg/sysemu/excp_helper.c
@@ -448,41 +448,65 @@ static bool get_physical_address(CPUX86State *env, vaddr addr,
                                  MMUAccessType access_type, int mmu_idx,
                                  TranslateResult *out, TranslateFault *err)
 {
-    if (!(env->cr[0] & CR0_PG_MASK)) {
-        out->paddr = addr & x86_get_a20_mask(env);
+    TranslateParams in;
+    bool use_stage2 = env->hflags2 & HF2_NPT_MASK;
 
-#ifdef TARGET_X86_64
-        if (!(env->hflags & HF_LMA_MASK)) {
-            /* Without long mode we can only address 32bits in real mode */
-            out->paddr = (uint32_t)out->paddr;
-        }
-#endif
-        out->prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
-        out->page_size = TARGET_PAGE_SIZE;
-        return true;
-    } else {
-        TranslateParams in = {
-            .addr = addr,
-            .cr3 = env->cr[3],
-            .pg_mode = get_pg_mode(env),
-            .mmu_idx = mmu_idx,
-            .access_type = access_type,
-            .use_stage2 = env->hflags2 & HF2_NPT_MASK,
-        };
+    in.addr = addr;
+    in.access_type = access_type;
 
-        if (in.pg_mode & PG_MODE_LMA) {
-            /* test virtual address sign extension */
-            int shift = in.pg_mode & PG_MODE_LA57 ? 56 : 47;
-            int64_t sext = (int64_t)addr >> shift;
-            if (sext != 0 && sext != -1) {
-                err->exception_index = EXCP0D_GPF;
-                err->error_code = 0;
-                err->cr2 = addr;
+    switch (mmu_idx) {
+    case MMU_PHYS_IDX:
+        break;
+
+    case MMU_NESTED_IDX:
+        if (likely(use_stage2)) {
+            in.cr3 = env->nested_cr3;
+            in.pg_mode = env->nested_pg_mode;
+            in.mmu_idx = MMU_USER_IDX;
+            in.use_stage2 = false;
+
+            if (!mmu_translate(env, &in, out, err)) {
+                err->stage2 = S2_GPA;
                 return false;
             }
+            return true;
         }
-        return mmu_translate(env, &in, out, err);
+        break;
+
+    default:
+        in.cr3 = env->cr[3];
+        in.mmu_idx = mmu_idx;
+        in.use_stage2 = use_stage2;
+        in.pg_mode = get_pg_mode(env);
+
+        if (likely(in.pg_mode)) {
+            if (in.pg_mode & PG_MODE_LMA) {
+                /* test virtual address sign extension */
+                int shift = in.pg_mode & PG_MODE_LA57 ? 56 : 47;
+                int64_t sext = (int64_t)addr >> shift;
+                if (sext != 0 && sext != -1) {
+                    err->exception_index = EXCP0D_GPF;
+                    err->error_code = 0;
+                    err->cr2 = addr;
+                    return false;
+                }
+            }
+            return mmu_translate(env, &in, out, err);
+        }
+        break;
     }
+
+    /* Translation disabled. */
+    out->paddr = addr & x86_get_a20_mask(env);
+#ifdef TARGET_X86_64
+    if (!(env->hflags & HF_LMA_MASK)) {
+        /* Without long mode we can only address 32bits in real mode */
+        out->paddr = (uint32_t)out->paddr;
+    }
+#endif
+    out->prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
+    out->page_size = TARGET_PAGE_SIZE;
+    return true;
 }
 
 bool x86_cpu_tlb_fill(CPUState *cs, vaddr addr, int size,
diff --git a/target/i386/tcg/sysemu/svm_helper.c b/target/i386/tcg/sysemu/svm_helper.c
index 2b6f450af9..85b7741d94 100644
--- a/target/i386/tcg/sysemu/svm_helper.c
+++ b/target/i386/tcg/sysemu/svm_helper.c
@@ -271,6 +271,8 @@ void helper_vmrun(CPUX86State *env, int aflag, int next_eip_addend)
         env->hflags2 |= HF2_NPT_MASK;
 
         env->nested_pg_mode = get_pg_mode(env) & PG_MODE_SVM_MASK;
+
+        tlb_flush_by_mmuidx(cs, 1 << MMU_NESTED_IDX);
     }
 
     /* enable intercepts */
@@ -720,6 +722,7 @@ void do_vmexit(CPUX86State *env)
                  env->vm_vmcb + offsetof(struct vmcb, control.int_state), 0);
     }
     env->hflags2 &= ~HF2_NPT_MASK;
+    tlb_flush_by_mmuidx(cs, 1 << MMU_NESTED_IDX);
 
     /* Save the VM state in the vmcb */
     svm_save_seg(env, env->vm_vmcb + offsetof(struct vmcb, save.es),
-- 
2.37.3



  parent reply	other threads:[~2022-10-18 14:08 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-18 13:29 [PULL 00/53] target/i386, scsi, build patches for 2022-10-18 Paolo Bonzini
2022-10-18 13:29 ` [PULL 01/53] virtio-scsi: Send "REPORTED LUNS CHANGED" sense data upon disk hotplug events Paolo Bonzini
2022-10-18 13:29 ` [PULL 02/53] configure: don't enable firmware for targets that are not built Paolo Bonzini
2022-10-18 13:29 ` [PULL 03/53] scsi: Use device_cold_reset() and bus_cold_reset() Paolo Bonzini
2022-10-18 13:29 ` [PULL 04/53] hw/scsi/vmw_pvscsi.c: Use device_cold_reset() to reset SCSI devices Paolo Bonzini
2022-10-18 13:29 ` [PULL 05/53] hyperv: fix SynIC SINT assertion failure on guest reset Paolo Bonzini
2022-10-18 13:29 ` [PULL 06/53] configure: Avoid using strings binary Paolo Bonzini
2022-10-18 13:29 ` [PULL 07/53] target/i386: Use device_cold_reset() to reset the APIC Paolo Bonzini
2022-10-18 13:29 ` [PULL 08/53] target/i386: Save and restore pc_save before tcg_remove_ops_after Paolo Bonzini
2022-10-18 13:29 ` [PULL 09/53] target/i386: Use MMUAccessType across excp_helper.c Paolo Bonzini
2022-10-18 13:29 ` [PULL 10/53] target/i386: Direct call get_hphys from mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 11/53] target/i386: Introduce structures for mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 12/53] target/i386: Reorg GET_HPHYS Paolo Bonzini
2022-10-18 13:30 ` Paolo Bonzini [this message]
2022-10-18 13:30 ` [PULL 14/53] target/i386: Use MMU_NESTED_IDX for vmload/vmsave Paolo Bonzini
2022-10-18 13:30 ` [PULL 15/53] target/i386: Combine 5 sets of variables in mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 16/53] target/i386: Use atomic operations for pte updates Paolo Bonzini
2022-10-18 13:30 ` [PULL 17/53] target/i386: Use probe_access_full for final stage2 translation Paolo Bonzini
2022-10-18 13:30 ` [PULL 18/53] target/i386: Define XMMReg and access macros, align ZMM registers Paolo Bonzini
2022-10-18 13:30 ` [PULL 19/53] target/i386: make ldo/sto operations consistent with ldq Paolo Bonzini
2022-10-18 13:30 ` [PULL 20/53] target/i386: make rex_w available even in 32-bit mode Paolo Bonzini
2022-10-18 13:30 ` [PULL 21/53] target/i386: add core of new i386 decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 22/53] target/i386: add ALU load/writeback core Paolo Bonzini
2022-10-18 13:30 ` [PULL 23/53] target/i386: add CPUID[EAX=7,ECX=0].ECX to DisasContext Paolo Bonzini
2022-10-18 13:30 ` [PULL 24/53] target/i386: add CPUID feature checks to new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 25/53] target/i386: add AVX_EN hflag Paolo Bonzini
2022-10-18 13:30 ` [PULL 26/53] target/i386: validate VEX prefixes via the instructions' exception classes Paolo Bonzini
2022-10-18 13:30 ` [PULL 27/53] target/i386: validate SSE prefixes directly in the decoding table Paolo Bonzini
2022-10-18 13:30 ` [PULL 28/53] target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 29/53] target/i386: Prepare ops_sse_header.h for 256 bit AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 30/53] target/i386: extend helpers to support VEX.V 3- and 4- operand encodings Paolo Bonzini
2022-10-18 13:30 ` [PULL 31/53] target/i386: support operand merging in binary scalar helpers Paolo Bonzini
2022-10-18 13:30 ` [PULL 32/53] target/i386: provide 3-operand versions of unary " Paolo Bonzini
2022-10-18 13:30 ` [PULL 33/53] target/i386: implement additional AVX comparison operators Paolo Bonzini
2022-10-18 13:30 ` [PULL 34/53] target/i386: Introduce 256-bit vector helpers Paolo Bonzini
2022-10-18 13:30 ` [PULL 35/53] target/i386: reimplement 0x0f 0x60-0x6f, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 36/53] target/i386: reimplement 0x0f 0xd8-0xdf, 0xe8-0xef, 0xf8-0xff, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 37/53] target/i386: reimplement 0x0f 0x50-0x5f, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 38/53] target/i386: reimplement 0x0f 0x78-0x7f, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 39/53] target/i386: reimplement 0x0f 0x70-0x77, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 40/53] target/i386: reimplement 0x0f 0xd0-0xd7, 0xe0-0xe7, 0xf0-0xf7, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 41/53] target/i386: clarify (un)signedness of immediates from 0F3Ah opcodes Paolo Bonzini
2022-10-18 13:30 ` [PULL 42/53] target/i386: reimplement 0x0f 0x3a, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 43/53] target/i386: Use tcg gvec ops for pmovmskb Paolo Bonzini
2022-10-18 13:30 ` [PULL 44/53] target/i386: reimplement 0x0f 0x38, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 45/53] target/i386: reimplement 0x0f 0xc2, 0xc4-0xc6, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 46/53] target/i386: reimplement 0x0f 0x10-0x17, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 47/53] target/i386: reimplement 0x0f 0x28-0x2f, " Paolo Bonzini
2023-05-09 10:52   ` Peter Maydell
2022-10-18 13:30 ` [PULL 48/53] target/i386: implement XSAVE and XRSTOR of AVX registers Paolo Bonzini
2022-10-18 13:30 ` [PULL 49/53] target/i386: implement VLDMXCSR/VSTMXCSR Paolo Bonzini
2022-10-18 13:30 ` [PULL 50/53] target/i386: Enable AVX cpuid bits when using TCG Paolo Bonzini
2022-10-18 13:30 ` [PULL 51/53] tests/tcg: extend SSE tests to AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 52/53] target/i386: move 3DNow to the new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 53/53] target/i386: remove old SSE decoder Paolo Bonzini
2022-10-18 20:01 ` [PULL 00/53] target/i386, scsi, build patches for 2022-10-18 Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221018133042.856368-14-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).