qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>
Subject: [PULL 18/53] target/i386: Define XMMReg and access macros, align ZMM registers
Date: Tue, 18 Oct 2022 15:30:07 +0200	[thread overview]
Message-ID: <20221018133042.856368-19-pbonzini@redhat.com> (raw)
In-Reply-To: <20221018133042.856368-1-pbonzini@redhat.com>

From: Richard Henderson <richard.henderson@linaro.org>

This will be used for emission and endian adjustments of gvec operations.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822223722.1697758-2-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 target/i386/cpu.h | 56 ++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 43 insertions(+), 13 deletions(-)

diff --git a/target/i386/cpu.h b/target/i386/cpu.h
index 6bb6653e76..5be90e72a9 100644
--- a/target/i386/cpu.h
+++ b/target/i386/cpu.h
@@ -1233,18 +1233,34 @@ typedef struct SegmentCache {
     uint32_t flags;
 } SegmentCache;
 
-#define MMREG_UNION(n, bits)        \
-    union n {                       \
-        uint8_t  _b_##n[(bits)/8];  \
-        uint16_t _w_##n[(bits)/16]; \
-        uint32_t _l_##n[(bits)/32]; \
-        uint64_t _q_##n[(bits)/64]; \
-        float32  _s_##n[(bits)/32]; \
-        float64  _d_##n[(bits)/64]; \
-    }
+typedef union MMXReg {
+    uint8_t  _b_MMXReg[64 / 8];
+    uint16_t _w_MMXReg[64 / 16];
+    uint32_t _l_MMXReg[64 / 32];
+    uint64_t _q_MMXReg[64 / 64];
+    float32  _s_MMXReg[64 / 32];
+    float64  _d_MMXReg[64 / 64];
+} MMXReg;
 
-typedef MMREG_UNION(ZMMReg, 512) ZMMReg;
-typedef MMREG_UNION(MMXReg, 64)  MMXReg;
+typedef union XMMReg {
+    uint64_t _q_XMMReg[128 / 64];
+} XMMReg;
+
+typedef union YMMReg {
+    uint64_t _q_YMMReg[256 / 64];
+    XMMReg   _x_YMMReg[256 / 128];
+} YMMReg;
+
+typedef union ZMMReg {
+    uint8_t  _b_ZMMReg[512 / 8];
+    uint16_t _w_ZMMReg[512 / 16];
+    uint32_t _l_ZMMReg[512 / 32];
+    uint64_t _q_ZMMReg[512 / 64];
+    float32  _s_ZMMReg[512 / 32];
+    float64  _d_ZMMReg[512 / 64];
+    XMMReg   _x_ZMMReg[512 / 128];
+    YMMReg   _y_ZMMReg[512 / 256];
+} ZMMReg;
 
 typedef struct BNDReg {
     uint64_t lb;
@@ -1267,6 +1283,13 @@ typedef struct BNDCSReg {
 #define ZMM_S(n) _s_ZMMReg[15 - (n)]
 #define ZMM_Q(n) _q_ZMMReg[7 - (n)]
 #define ZMM_D(n) _d_ZMMReg[7 - (n)]
+#define ZMM_X(n) _x_ZMMReg[3 - (n)]
+#define ZMM_Y(n) _y_ZMMReg[1 - (n)]
+
+#define XMM_Q(n) _q_XMMReg[1 - (n)]
+
+#define YMM_Q(n) _q_YMMReg[3 - (n)]
+#define YMM_X(n) _x_YMMReg[1 - (n)]
 
 #define MMX_B(n) _b_MMXReg[7 - (n)]
 #define MMX_W(n) _w_MMXReg[3 - (n)]
@@ -1279,6 +1302,13 @@ typedef struct BNDCSReg {
 #define ZMM_S(n) _s_ZMMReg[n]
 #define ZMM_Q(n) _q_ZMMReg[n]
 #define ZMM_D(n) _d_ZMMReg[n]
+#define ZMM_X(n) _x_ZMMReg[n]
+#define ZMM_Y(n) _y_ZMMReg[n]
+
+#define XMM_Q(n) _q_XMMReg[n]
+
+#define YMM_Q(n) _q_YMMReg[n]
+#define YMM_X(n) _x_YMMReg[n]
 
 #define MMX_B(n) _b_MMXReg[n]
 #define MMX_W(n) _w_MMXReg[n]
@@ -1556,8 +1586,8 @@ typedef struct CPUArchState {
     float_status mmx_status; /* for 3DNow! float ops */
     float_status sse_status;
     uint32_t mxcsr;
-    ZMMReg xmm_regs[CPU_NB_REGS == 8 ? 8 : 32];
-    ZMMReg xmm_t0;
+    ZMMReg xmm_regs[CPU_NB_REGS == 8 ? 8 : 32] QEMU_ALIGNED(16);
+    ZMMReg xmm_t0 QEMU_ALIGNED(16);
     MMXReg mmx_t0;
 
     uint64_t opmask_regs[NB_OPMASK_REGS];
-- 
2.37.3



  parent reply	other threads:[~2022-10-18 14:08 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-18 13:29 [PULL 00/53] target/i386, scsi, build patches for 2022-10-18 Paolo Bonzini
2022-10-18 13:29 ` [PULL 01/53] virtio-scsi: Send "REPORTED LUNS CHANGED" sense data upon disk hotplug events Paolo Bonzini
2022-10-18 13:29 ` [PULL 02/53] configure: don't enable firmware for targets that are not built Paolo Bonzini
2022-10-18 13:29 ` [PULL 03/53] scsi: Use device_cold_reset() and bus_cold_reset() Paolo Bonzini
2022-10-18 13:29 ` [PULL 04/53] hw/scsi/vmw_pvscsi.c: Use device_cold_reset() to reset SCSI devices Paolo Bonzini
2022-10-18 13:29 ` [PULL 05/53] hyperv: fix SynIC SINT assertion failure on guest reset Paolo Bonzini
2022-10-18 13:29 ` [PULL 06/53] configure: Avoid using strings binary Paolo Bonzini
2022-10-18 13:29 ` [PULL 07/53] target/i386: Use device_cold_reset() to reset the APIC Paolo Bonzini
2022-10-18 13:29 ` [PULL 08/53] target/i386: Save and restore pc_save before tcg_remove_ops_after Paolo Bonzini
2022-10-18 13:29 ` [PULL 09/53] target/i386: Use MMUAccessType across excp_helper.c Paolo Bonzini
2022-10-18 13:29 ` [PULL 10/53] target/i386: Direct call get_hphys from mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 11/53] target/i386: Introduce structures for mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 12/53] target/i386: Reorg GET_HPHYS Paolo Bonzini
2022-10-18 13:30 ` [PULL 13/53] target/i386: Add MMU_PHYS_IDX and MMU_NESTED_IDX Paolo Bonzini
2022-10-18 13:30 ` [PULL 14/53] target/i386: Use MMU_NESTED_IDX for vmload/vmsave Paolo Bonzini
2022-10-18 13:30 ` [PULL 15/53] target/i386: Combine 5 sets of variables in mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 16/53] target/i386: Use atomic operations for pte updates Paolo Bonzini
2022-10-18 13:30 ` [PULL 17/53] target/i386: Use probe_access_full for final stage2 translation Paolo Bonzini
2022-10-18 13:30 ` Paolo Bonzini [this message]
2022-10-18 13:30 ` [PULL 19/53] target/i386: make ldo/sto operations consistent with ldq Paolo Bonzini
2022-10-18 13:30 ` [PULL 20/53] target/i386: make rex_w available even in 32-bit mode Paolo Bonzini
2022-10-18 13:30 ` [PULL 21/53] target/i386: add core of new i386 decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 22/53] target/i386: add ALU load/writeback core Paolo Bonzini
2022-10-18 13:30 ` [PULL 23/53] target/i386: add CPUID[EAX=7,ECX=0].ECX to DisasContext Paolo Bonzini
2022-10-18 13:30 ` [PULL 24/53] target/i386: add CPUID feature checks to new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 25/53] target/i386: add AVX_EN hflag Paolo Bonzini
2022-10-18 13:30 ` [PULL 26/53] target/i386: validate VEX prefixes via the instructions' exception classes Paolo Bonzini
2022-10-18 13:30 ` [PULL 27/53] target/i386: validate SSE prefixes directly in the decoding table Paolo Bonzini
2022-10-18 13:30 ` [PULL 28/53] target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 29/53] target/i386: Prepare ops_sse_header.h for 256 bit AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 30/53] target/i386: extend helpers to support VEX.V 3- and 4- operand encodings Paolo Bonzini
2022-10-18 13:30 ` [PULL 31/53] target/i386: support operand merging in binary scalar helpers Paolo Bonzini
2022-10-18 13:30 ` [PULL 32/53] target/i386: provide 3-operand versions of unary " Paolo Bonzini
2022-10-18 13:30 ` [PULL 33/53] target/i386: implement additional AVX comparison operators Paolo Bonzini
2022-10-18 13:30 ` [PULL 34/53] target/i386: Introduce 256-bit vector helpers Paolo Bonzini
2022-10-18 13:30 ` [PULL 35/53] target/i386: reimplement 0x0f 0x60-0x6f, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 36/53] target/i386: reimplement 0x0f 0xd8-0xdf, 0xe8-0xef, 0xf8-0xff, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 37/53] target/i386: reimplement 0x0f 0x50-0x5f, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 38/53] target/i386: reimplement 0x0f 0x78-0x7f, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 39/53] target/i386: reimplement 0x0f 0x70-0x77, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 40/53] target/i386: reimplement 0x0f 0xd0-0xd7, 0xe0-0xe7, 0xf0-0xf7, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 41/53] target/i386: clarify (un)signedness of immediates from 0F3Ah opcodes Paolo Bonzini
2022-10-18 13:30 ` [PULL 42/53] target/i386: reimplement 0x0f 0x3a, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 43/53] target/i386: Use tcg gvec ops for pmovmskb Paolo Bonzini
2022-10-18 13:30 ` [PULL 44/53] target/i386: reimplement 0x0f 0x38, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 45/53] target/i386: reimplement 0x0f 0xc2, 0xc4-0xc6, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 46/53] target/i386: reimplement 0x0f 0x10-0x17, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 47/53] target/i386: reimplement 0x0f 0x28-0x2f, " Paolo Bonzini
2023-05-09 10:52   ` Peter Maydell
2022-10-18 13:30 ` [PULL 48/53] target/i386: implement XSAVE and XRSTOR of AVX registers Paolo Bonzini
2022-10-18 13:30 ` [PULL 49/53] target/i386: implement VLDMXCSR/VSTMXCSR Paolo Bonzini
2022-10-18 13:30 ` [PULL 50/53] target/i386: Enable AVX cpuid bits when using TCG Paolo Bonzini
2022-10-18 13:30 ` [PULL 51/53] tests/tcg: extend SSE tests to AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 52/53] target/i386: move 3DNow to the new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 53/53] target/i386: remove old SSE decoder Paolo Bonzini
2022-10-18 20:01 ` [PULL 00/53] target/i386, scsi, build patches for 2022-10-18 Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221018133042.856368-19-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).