qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [PULL 20/53] target/i386: make rex_w available even in 32-bit mode
Date: Tue, 18 Oct 2022 15:30:09 +0200	[thread overview]
Message-ID: <20221018133042.856368-21-pbonzini@redhat.com> (raw)
In-Reply-To: <20221018133042.856368-1-pbonzini@redhat.com>

REX.W can be used even in 32-bit mode by AVX instructions, where it is retroactively
renamed to VEX.W.  Make the field available even in 32-bit mode but keep the REX_W()
macro as it was; this way, that the handling of dflag does not use it by mistake and
the AVX code more clearly points at the special VEX behavior of the bit.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 target/i386/tcg/translate.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c
index 1b96201685..279e34e0d0 100644
--- a/target/i386/tcg/translate.c
+++ b/target/i386/tcg/translate.c
@@ -99,8 +99,8 @@ typedef struct DisasContext {
     uint8_t rex_r;
     uint8_t rex_x;
     uint8_t rex_b;
-    bool rex_w;
 #endif
+    bool vex_w; /* used by AVX even on 32-bit processors */
     bool jmp_opt; /* use direct block chaining for direct jumps */
     bool repz_opt; /* optimize jumps within repz instructions */
     bool cc_op_dirty;
@@ -177,7 +177,7 @@ typedef struct DisasContext {
 
 #ifdef TARGET_X86_64
 #define REX_PREFIX(S)  (((S)->prefix & PREFIX_REX) != 0)
-#define REX_W(S)       ((S)->rex_w)
+#define REX_W(S)       ((S)->vex_w)
 #define REX_R(S)       ((S)->rex_r + 0)
 #define REX_X(S)       ((S)->rex_x + 0)
 #define REX_B(S)       ((S)->rex_b + 0)
@@ -4823,7 +4823,6 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
     s->pc = s->base.pc_next;
     s->override = -1;
 #ifdef TARGET_X86_64
-    s->rex_w = false;
     s->rex_r = 0;
     s->rex_x = 0;
     s->rex_b = 0;
@@ -4831,6 +4830,7 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
     s->rip_offset = 0; /* for relative ip address */
     s->vex_l = 0;
     s->vex_v = 0;
+    s->vex_w = false;
     switch (sigsetjmp(s->jmpbuf, 0)) {
     case 0:
         break;
@@ -4903,7 +4903,7 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
         if (CODE64(s)) {
             /* REX prefix */
             prefixes |= PREFIX_REX;
-            s->rex_w = (b >> 3) & 1;
+            s->vex_w = (b >> 3) & 1;
             s->rex_r = (b & 0x4) << 1;
             s->rex_x = (b & 0x2) << 2;
             s->rex_b = (b & 0x1) << 3;
@@ -4946,8 +4946,8 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
 #ifdef TARGET_X86_64
                 s->rex_x = (~vex2 >> 3) & 8;
                 s->rex_b = (~vex2 >> 2) & 8;
-                s->rex_w = (vex3 >> 7) & 1;
 #endif
+                s->vex_w = (vex3 >> 7) & 1;
                 switch (vex2 & 0x1f) {
                 case 0x01: /* Implied 0f leading opcode bytes.  */
                     b = x86_ldub_code(env, s) | 0x100;
-- 
2.37.3



  parent reply	other threads:[~2022-10-18 14:44 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-18 13:29 [PULL 00/53] target/i386, scsi, build patches for 2022-10-18 Paolo Bonzini
2022-10-18 13:29 ` [PULL 01/53] virtio-scsi: Send "REPORTED LUNS CHANGED" sense data upon disk hotplug events Paolo Bonzini
2022-10-18 13:29 ` [PULL 02/53] configure: don't enable firmware for targets that are not built Paolo Bonzini
2022-10-18 13:29 ` [PULL 03/53] scsi: Use device_cold_reset() and bus_cold_reset() Paolo Bonzini
2022-10-18 13:29 ` [PULL 04/53] hw/scsi/vmw_pvscsi.c: Use device_cold_reset() to reset SCSI devices Paolo Bonzini
2022-10-18 13:29 ` [PULL 05/53] hyperv: fix SynIC SINT assertion failure on guest reset Paolo Bonzini
2022-10-18 13:29 ` [PULL 06/53] configure: Avoid using strings binary Paolo Bonzini
2022-10-18 13:29 ` [PULL 07/53] target/i386: Use device_cold_reset() to reset the APIC Paolo Bonzini
2022-10-18 13:29 ` [PULL 08/53] target/i386: Save and restore pc_save before tcg_remove_ops_after Paolo Bonzini
2022-10-18 13:29 ` [PULL 09/53] target/i386: Use MMUAccessType across excp_helper.c Paolo Bonzini
2022-10-18 13:29 ` [PULL 10/53] target/i386: Direct call get_hphys from mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 11/53] target/i386: Introduce structures for mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 12/53] target/i386: Reorg GET_HPHYS Paolo Bonzini
2022-10-18 13:30 ` [PULL 13/53] target/i386: Add MMU_PHYS_IDX and MMU_NESTED_IDX Paolo Bonzini
2022-10-18 13:30 ` [PULL 14/53] target/i386: Use MMU_NESTED_IDX for vmload/vmsave Paolo Bonzini
2022-10-18 13:30 ` [PULL 15/53] target/i386: Combine 5 sets of variables in mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 16/53] target/i386: Use atomic operations for pte updates Paolo Bonzini
2022-10-18 13:30 ` [PULL 17/53] target/i386: Use probe_access_full for final stage2 translation Paolo Bonzini
2022-10-18 13:30 ` [PULL 18/53] target/i386: Define XMMReg and access macros, align ZMM registers Paolo Bonzini
2022-10-18 13:30 ` [PULL 19/53] target/i386: make ldo/sto operations consistent with ldq Paolo Bonzini
2022-10-18 13:30 ` Paolo Bonzini [this message]
2022-10-18 13:30 ` [PULL 21/53] target/i386: add core of new i386 decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 22/53] target/i386: add ALU load/writeback core Paolo Bonzini
2022-10-18 13:30 ` [PULL 23/53] target/i386: add CPUID[EAX=7,ECX=0].ECX to DisasContext Paolo Bonzini
2022-10-18 13:30 ` [PULL 24/53] target/i386: add CPUID feature checks to new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 25/53] target/i386: add AVX_EN hflag Paolo Bonzini
2022-10-18 13:30 ` [PULL 26/53] target/i386: validate VEX prefixes via the instructions' exception classes Paolo Bonzini
2022-10-18 13:30 ` [PULL 27/53] target/i386: validate SSE prefixes directly in the decoding table Paolo Bonzini
2022-10-18 13:30 ` [PULL 28/53] target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 29/53] target/i386: Prepare ops_sse_header.h for 256 bit AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 30/53] target/i386: extend helpers to support VEX.V 3- and 4- operand encodings Paolo Bonzini
2022-10-18 13:30 ` [PULL 31/53] target/i386: support operand merging in binary scalar helpers Paolo Bonzini
2022-10-18 13:30 ` [PULL 32/53] target/i386: provide 3-operand versions of unary " Paolo Bonzini
2022-10-18 13:30 ` [PULL 33/53] target/i386: implement additional AVX comparison operators Paolo Bonzini
2022-10-18 13:30 ` [PULL 34/53] target/i386: Introduce 256-bit vector helpers Paolo Bonzini
2022-10-18 13:30 ` [PULL 35/53] target/i386: reimplement 0x0f 0x60-0x6f, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 36/53] target/i386: reimplement 0x0f 0xd8-0xdf, 0xe8-0xef, 0xf8-0xff, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 37/53] target/i386: reimplement 0x0f 0x50-0x5f, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 38/53] target/i386: reimplement 0x0f 0x78-0x7f, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 39/53] target/i386: reimplement 0x0f 0x70-0x77, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 40/53] target/i386: reimplement 0x0f 0xd0-0xd7, 0xe0-0xe7, 0xf0-0xf7, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 41/53] target/i386: clarify (un)signedness of immediates from 0F3Ah opcodes Paolo Bonzini
2022-10-18 13:30 ` [PULL 42/53] target/i386: reimplement 0x0f 0x3a, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 43/53] target/i386: Use tcg gvec ops for pmovmskb Paolo Bonzini
2022-10-18 13:30 ` [PULL 44/53] target/i386: reimplement 0x0f 0x38, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 45/53] target/i386: reimplement 0x0f 0xc2, 0xc4-0xc6, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 46/53] target/i386: reimplement 0x0f 0x10-0x17, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 47/53] target/i386: reimplement 0x0f 0x28-0x2f, " Paolo Bonzini
2023-05-09 10:52   ` Peter Maydell
2022-10-18 13:30 ` [PULL 48/53] target/i386: implement XSAVE and XRSTOR of AVX registers Paolo Bonzini
2022-10-18 13:30 ` [PULL 49/53] target/i386: implement VLDMXCSR/VSTMXCSR Paolo Bonzini
2022-10-18 13:30 ` [PULL 50/53] target/i386: Enable AVX cpuid bits when using TCG Paolo Bonzini
2022-10-18 13:30 ` [PULL 51/53] tests/tcg: extend SSE tests to AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 52/53] target/i386: move 3DNow to the new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 53/53] target/i386: remove old SSE decoder Paolo Bonzini
2022-10-18 20:01 ` [PULL 00/53] target/i386, scsi, build patches for 2022-10-18 Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221018133042.856368-21-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).