From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>
Subject: [PULL 52/53] target/i386: move 3DNow to the new decoder
Date: Tue, 18 Oct 2022 15:30:41 +0200 [thread overview]
Message-ID: <20221018133042.856368-53-pbonzini@redhat.com> (raw)
In-Reply-To: <20221018133042.856368-1-pbonzini@redhat.com>
This adds another kind of weirdness when you thought you had seen it all:
an opcode byte that comes _after_ the address, not before. It's not
worth adding a new X86_SPECIAL_* constant for it, but it's actually
not unlike VCMP; so, forgive me for exploiting the similarity and just
deciding to dispatch to the right gen_helper_* call in a single code
generation function.
In fact, the old decoder had a bug where s->rip_offset should have
been set to 1 for 3DNow! instructions, and it's fixed now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/helper.h | 1 -
target/i386/tcg/decode-new.c.inc | 10 +++++
target/i386/tcg/decode-new.h | 1 +
target/i386/tcg/emit.c.inc | 61 +++++++++++++++++++++++++++
target/i386/tcg/fpu_helper.c | 6 ---
target/i386/tcg/translate.c | 71 +-------------------------------
6 files changed, 74 insertions(+), 76 deletions(-)
diff --git a/target/i386/helper.h b/target/i386/helper.h
index a2c2c085a3..88143b2a24 100644
--- a/target/i386/helper.h
+++ b/target/i386/helper.h
@@ -212,7 +212,6 @@ DEF_HELPER_2(ldmxcsr, void, env, i32)
DEF_HELPER_1(update_mxcsr, void, env)
DEF_HELPER_1(enter_mmx, void, env)
DEF_HELPER_1(emms, void, env)
-DEF_HELPER_3(movq, void, env, ptr, ptr)
#define SHIFT 0
#include "ops_sse_header.h"
diff --git a/target/i386/tcg/decode-new.c.inc b/target/i386/tcg/decode-new.c.inc
index 5f4268bdfb..9e43de6827 100644
--- a/target/i386/tcg/decode-new.c.inc
+++ b/target/i386/tcg/decode-new.c.inc
@@ -779,6 +779,14 @@ static void decode_0FE6(DisasContext *s, CPUX86State *env, X86OpEntry *entry, ui
}
static const X86OpEntry opcodes_0F[256] = {
+ [0x0E] = X86_OP_ENTRY0(EMMS, cpuid(3DNOW)), /* femms */
+ /*
+ * 3DNow!'s opcode byte comes *after* modrm and displacements, making it
+ * more like an Ib operand. Dispatch to the right helper in a single gen_*
+ * function.
+ */
+ [0x0F] = X86_OP_ENTRY3(3dnow, P,q, Q,q, I,b, cpuid(3DNOW)),
+
[0x10] = X86_OP_GROUP0(0F10),
[0x11] = X86_OP_GROUP0(0F11),
[0x12] = X86_OP_GROUP0(0F12),
@@ -1364,6 +1372,8 @@ static bool has_cpuid_feature(DisasContext *s, X86CPUIDFeature cpuid)
case X86_FEAT_AVX:
return (s->cpuid_ext_features & CPUID_EXT_AVX);
+ case X86_FEAT_3DNOW:
+ return (s->cpuid_ext2_features & CPUID_EXT2_3DNOW);
case X86_FEAT_SSE4A:
return (s->cpuid_ext3_features & CPUID_EXT3_SSE4A);
diff --git a/target/i386/tcg/decode-new.h b/target/i386/tcg/decode-new.h
index 2f0b0e4cfd..f159c26850 100644
--- a/target/i386/tcg/decode-new.h
+++ b/target/i386/tcg/decode-new.h
@@ -96,6 +96,7 @@ typedef enum X86OpSize {
typedef enum X86CPUIDFeature {
X86_FEAT_None,
+ X86_FEAT_3DNOW,
X86_FEAT_ADX,
X86_FEAT_AES,
X86_FEAT_AVX,
diff --git a/target/i386/tcg/emit.c.inc b/target/i386/tcg/emit.c.inc
index d7c2290db1..63af60ba65 100644
--- a/target/i386/tcg/emit.c.inc
+++ b/target/i386/tcg/emit.c.inc
@@ -19,6 +19,7 @@
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
+typedef void (*SSEFunc_0_epp)(TCGv_ptr env, TCGv_ptr reg_a, TCGv_ptr reg_b);
typedef void (*SSEFunc_0_epppti)(TCGv_ptr env, TCGv_ptr reg_a, TCGv_ptr reg_b,
TCGv_ptr reg_c, TCGv a0, TCGv_i32 scale);
@@ -326,6 +327,66 @@ static void gen_store_sse(DisasContext *s, X86DecodedInsn *decode, int src_ofs)
}
}
+static void gen_helper_pavgusb(TCGv_ptr env, TCGv_ptr reg_a, TCGv_ptr reg_b)
+{
+ gen_helper_pavgb_mmx(env, reg_a, reg_a, reg_b);
+}
+
+#define FN_3DNOW_MOVE ((SSEFunc_0_epp) (uintptr_t) 1)
+static const SSEFunc_0_epp fns_3dnow[] = {
+ [0x0c] = gen_helper_pi2fw,
+ [0x0d] = gen_helper_pi2fd,
+ [0x1c] = gen_helper_pf2iw,
+ [0x1d] = gen_helper_pf2id,
+ [0x8a] = gen_helper_pfnacc,
+ [0x8e] = gen_helper_pfpnacc,
+ [0x90] = gen_helper_pfcmpge,
+ [0x94] = gen_helper_pfmin,
+ [0x96] = gen_helper_pfrcp,
+ [0x97] = gen_helper_pfrsqrt,
+ [0x9a] = gen_helper_pfsub,
+ [0x9e] = gen_helper_pfadd,
+ [0xa0] = gen_helper_pfcmpgt,
+ [0xa4] = gen_helper_pfmax,
+ [0xa6] = FN_3DNOW_MOVE, /* PFRCPIT1; no need to actually increase precision */
+ [0xa7] = FN_3DNOW_MOVE, /* PFRSQIT1 */
+ [0xb6] = FN_3DNOW_MOVE, /* PFRCPIT2 */
+ [0xaa] = gen_helper_pfsubr,
+ [0xae] = gen_helper_pfacc,
+ [0xb0] = gen_helper_pfcmpeq,
+ [0xb4] = gen_helper_pfmul,
+ [0xb7] = gen_helper_pmulhrw_mmx,
+ [0xbb] = gen_helper_pswapd,
+ [0xbf] = gen_helper_pavgusb,
+};
+
+static void gen_3dnow(DisasContext *s, CPUX86State *env, X86DecodedInsn *decode)
+{
+ uint8_t b = decode->immediate;
+ SSEFunc_0_epp fn = b < ARRAY_SIZE(fns_3dnow) ? fns_3dnow[b] : NULL;
+
+ if (!fn) {
+ gen_illegal_opcode(s);
+ return;
+ }
+ if (s->flags & HF_TS_MASK) {
+ gen_NM_exception(s);
+ return;
+ }
+ if (s->flags & HF_EM_MASK) {
+ gen_illegal_opcode(s);
+ return;
+ }
+
+ gen_helper_enter_mmx(cpu_env);
+ if (fn == FN_3DNOW_MOVE) {
+ tcg_gen_ld_i64(s->tmp1_i64, cpu_env, decode->op[1].offset);
+ tcg_gen_st_i64(s->tmp1_i64, cpu_env, decode->op[0].offset);
+ } else {
+ fn(cpu_env, OP_PTR0, OP_PTR1);
+ }
+}
+
/*
* 00 = v*ps Vps, Hps, Wpd
* 66 = v*pd Vpd, Hpd, Wps
diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c
index 7670739abe..a6a90a1817 100644
--- a/target/i386/tcg/fpu_helper.c
+++ b/target/i386/tcg/fpu_helper.c
@@ -3126,12 +3126,6 @@ void helper_emms(CPUX86State *env)
*(uint32_t *)(env->fptags + 4) = 0x01010101;
}
-/* XXX: suppress */
-void helper_movq(CPUX86State *env, void *d, void *s)
-{
- *(uint64_t *)d = *(uint64_t *)s;
-}
-
#define SHIFT 0
#include "ops_sse.h"
diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c
index cf895e4132..e9af467d6f 100644
--- a/target/i386/tcg/translate.c
+++ b/target/i386/tcg/translate.c
@@ -3011,7 +3011,6 @@ static bool first = true; static unsigned long limit;
#define SSE_OPF_CMP (1 << 1) /* does not write for first operand */
#define SSE_OPF_BLENDV (1 << 2) /* blendv* instruction */
#define SSE_OPF_SPECIAL (1 << 3) /* magic */
-#define SSE_OPF_3DNOW (1 << 4) /* 3DNow! instruction */
#define SSE_OPF_MMX (1 << 5) /* MMX/integer/AVX2 instruction */
#define SSE_OPF_SCALAR (1 << 6) /* Has SSE scalar variants */
#define SSE_OPF_SHUF (1 << 9) /* pshufx/shufpx */
@@ -3045,13 +3044,9 @@ struct SSEOpHelper_table1 {
SSEFuncs fn[4];
};
-#define SSE_3DNOW { SSE_OPF_3DNOW }
#define SSE_SPECIAL { SSE_OPF_SPECIAL }
static const struct SSEOpHelper_table1 sse_op_table1[256] = {
- /* 3DNow! extensions */
- [0x0e] = SSE_SPECIAL, /* femms */
- [0x0f] = SSE_3DNOW, /* pf... (sse_op_table5) */
/* pure SSE operations */
[0x10] = SSE_SPECIAL, /* movups, movupd, movss, movsd */
[0x11] = SSE_SPECIAL, /* movups, movupd, movss, movsd */
@@ -3260,38 +3255,6 @@ static const SSEFunc_0_eppp sse_op_table4[8][4] = {
};
#undef SSE_CMP
-static void gen_helper_pavgusb(TCGv_ptr env, TCGv_ptr reg_a, TCGv_ptr reg_b)
-{
- gen_helper_pavgb_mmx(env, reg_a, reg_a, reg_b);
-}
-
-static const SSEFunc_0_epp sse_op_table5[256] = {
- [0x0c] = gen_helper_pi2fw,
- [0x0d] = gen_helper_pi2fd,
- [0x1c] = gen_helper_pf2iw,
- [0x1d] = gen_helper_pf2id,
- [0x8a] = gen_helper_pfnacc,
- [0x8e] = gen_helper_pfpnacc,
- [0x90] = gen_helper_pfcmpge,
- [0x94] = gen_helper_pfmin,
- [0x96] = gen_helper_pfrcp,
- [0x97] = gen_helper_pfrsqrt,
- [0x9a] = gen_helper_pfsub,
- [0x9e] = gen_helper_pfadd,
- [0xa0] = gen_helper_pfcmpgt,
- [0xa4] = gen_helper_pfmax,
- [0xa6] = gen_helper_movq, /* pfrcpit1; no need to actually increase precision */
- [0xa7] = gen_helper_movq, /* pfrsqit1 */
- [0xaa] = gen_helper_pfsubr,
- [0xae] = gen_helper_pfacc,
- [0xb0] = gen_helper_pfcmpeq,
- [0xb4] = gen_helper_pfmul,
- [0xb6] = gen_helper_movq, /* pfrcpit2 */
- [0xb7] = gen_helper_pmulhrw_mmx,
- [0xbb] = gen_helper_pswapd,
- [0xbf] = gen_helper_pavgusb,
-};
-
struct SSEOpHelper_table6 {
SSEFuncs fn[2];
uint32_t ext_mask;
@@ -3443,7 +3406,7 @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b)
b1 = 0;
sse_op_flags = sse_op_table1[b].flags;
sse_op_fn = sse_op_table1[b].fn[b1];
- if ((sse_op_flags & (SSE_OPF_SPECIAL | SSE_OPF_3DNOW)) == 0
+ if ((sse_op_flags & SSE_OPF_SPECIAL) == 0
&& !sse_op_fn.op1) {
goto unknown_op;
}
@@ -3457,11 +3420,6 @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b)
is_xmm = 1;
}
}
- if (sse_op_flags & SSE_OPF_3DNOW) {
- if (!(s->cpuid_ext2_features & CPUID_EXT2_3DNOW)) {
- goto illegal_op;
- }
- }
/* simple MMX/SSE operation */
if (s->flags & HF_TS_MASK) {
gen_exception(s, EXCP07_PREX);
@@ -3477,15 +3435,6 @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b)
&& (b != 0x38 && b != 0x3a)) {
goto unknown_op;
}
- if (b == 0x0e) {
- if (!(s->cpuid_ext2_features & CPUID_EXT2_3DNOW)) {
- /* If we were fully decoding this we might use illegal_op. */
- goto unknown_op;
- }
- /* femms */
- gen_helper_emms(cpu_env);
- return;
- }
if (b == 0x77) {
/* emms */
gen_helper_emms(cpu_env);
@@ -4643,18 +4592,6 @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b)
rm = (modrm & 7);
op2_offset = offsetof(CPUX86State,fpregs[rm].mmx);
}
- if (sse_op_flags & SSE_OPF_3DNOW) {
- /* 3DNow! data insns */
- val = x86_ldub_code(env, s);
- SSEFunc_0_epp op_3dnow = sse_op_table5[val];
- if (!op_3dnow) {
- goto unknown_op;
- }
- tcg_gen_addi_ptr(s->ptr0, cpu_env, op1_offset);
- tcg_gen_addi_ptr(s->ptr1, cpu_env, op2_offset);
- op_3dnow(cpu_env, s->ptr0, s->ptr1);
- return;
- }
}
@@ -4783,7 +4720,7 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
#endif
if (use_new &&
(b == 0x138 || b == 0x13a ||
- (b >= 0x110 && b <= 0x117) ||
+ (b >= 0x10e && b <= 0x117) ||
(b >= 0x128 && b <= 0x12f) ||
(b >= 0x150 && b <= 0x17f) ||
b == 0x1c2 || (b >= 0x1c4 && b <= 0x1c6) ||
@@ -8512,10 +8449,6 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
set_cc_op(s, CC_OP_POPCNT);
break;
- case 0x10e ... 0x10f:
- /* 3DNow! instructions, ignore prefixes */
- s->prefix &= ~(PREFIX_REPZ | PREFIX_REPNZ | PREFIX_DATA);
- /* fall through */
case 0x110 ... 0x117:
case 0x128 ... 0x12f:
case 0x138 ... 0x13a:
--
2.37.3
next prev parent reply other threads:[~2022-10-18 14:11 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-18 13:29 [PULL 00/53] target/i386, scsi, build patches for 2022-10-18 Paolo Bonzini
2022-10-18 13:29 ` [PULL 01/53] virtio-scsi: Send "REPORTED LUNS CHANGED" sense data upon disk hotplug events Paolo Bonzini
2022-10-18 13:29 ` [PULL 02/53] configure: don't enable firmware for targets that are not built Paolo Bonzini
2022-10-18 13:29 ` [PULL 03/53] scsi: Use device_cold_reset() and bus_cold_reset() Paolo Bonzini
2022-10-18 13:29 ` [PULL 04/53] hw/scsi/vmw_pvscsi.c: Use device_cold_reset() to reset SCSI devices Paolo Bonzini
2022-10-18 13:29 ` [PULL 05/53] hyperv: fix SynIC SINT assertion failure on guest reset Paolo Bonzini
2022-10-18 13:29 ` [PULL 06/53] configure: Avoid using strings binary Paolo Bonzini
2022-10-18 13:29 ` [PULL 07/53] target/i386: Use device_cold_reset() to reset the APIC Paolo Bonzini
2022-10-18 13:29 ` [PULL 08/53] target/i386: Save and restore pc_save before tcg_remove_ops_after Paolo Bonzini
2022-10-18 13:29 ` [PULL 09/53] target/i386: Use MMUAccessType across excp_helper.c Paolo Bonzini
2022-10-18 13:29 ` [PULL 10/53] target/i386: Direct call get_hphys from mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 11/53] target/i386: Introduce structures for mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 12/53] target/i386: Reorg GET_HPHYS Paolo Bonzini
2022-10-18 13:30 ` [PULL 13/53] target/i386: Add MMU_PHYS_IDX and MMU_NESTED_IDX Paolo Bonzini
2022-10-18 13:30 ` [PULL 14/53] target/i386: Use MMU_NESTED_IDX for vmload/vmsave Paolo Bonzini
2022-10-18 13:30 ` [PULL 15/53] target/i386: Combine 5 sets of variables in mmu_translate Paolo Bonzini
2022-10-18 13:30 ` [PULL 16/53] target/i386: Use atomic operations for pte updates Paolo Bonzini
2022-10-18 13:30 ` [PULL 17/53] target/i386: Use probe_access_full for final stage2 translation Paolo Bonzini
2022-10-18 13:30 ` [PULL 18/53] target/i386: Define XMMReg and access macros, align ZMM registers Paolo Bonzini
2022-10-18 13:30 ` [PULL 19/53] target/i386: make ldo/sto operations consistent with ldq Paolo Bonzini
2022-10-18 13:30 ` [PULL 20/53] target/i386: make rex_w available even in 32-bit mode Paolo Bonzini
2022-10-18 13:30 ` [PULL 21/53] target/i386: add core of new i386 decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 22/53] target/i386: add ALU load/writeback core Paolo Bonzini
2022-10-18 13:30 ` [PULL 23/53] target/i386: add CPUID[EAX=7,ECX=0].ECX to DisasContext Paolo Bonzini
2022-10-18 13:30 ` [PULL 24/53] target/i386: add CPUID feature checks to new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 25/53] target/i386: add AVX_EN hflag Paolo Bonzini
2022-10-18 13:30 ` [PULL 26/53] target/i386: validate VEX prefixes via the instructions' exception classes Paolo Bonzini
2022-10-18 13:30 ` [PULL 27/53] target/i386: validate SSE prefixes directly in the decoding table Paolo Bonzini
2022-10-18 13:30 ` [PULL 28/53] target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder Paolo Bonzini
2022-10-18 13:30 ` [PULL 29/53] target/i386: Prepare ops_sse_header.h for 256 bit AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 30/53] target/i386: extend helpers to support VEX.V 3- and 4- operand encodings Paolo Bonzini
2022-10-18 13:30 ` [PULL 31/53] target/i386: support operand merging in binary scalar helpers Paolo Bonzini
2022-10-18 13:30 ` [PULL 32/53] target/i386: provide 3-operand versions of unary " Paolo Bonzini
2022-10-18 13:30 ` [PULL 33/53] target/i386: implement additional AVX comparison operators Paolo Bonzini
2022-10-18 13:30 ` [PULL 34/53] target/i386: Introduce 256-bit vector helpers Paolo Bonzini
2022-10-18 13:30 ` [PULL 35/53] target/i386: reimplement 0x0f 0x60-0x6f, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 36/53] target/i386: reimplement 0x0f 0xd8-0xdf, 0xe8-0xef, 0xf8-0xff, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 37/53] target/i386: reimplement 0x0f 0x50-0x5f, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 38/53] target/i386: reimplement 0x0f 0x78-0x7f, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 39/53] target/i386: reimplement 0x0f 0x70-0x77, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 40/53] target/i386: reimplement 0x0f 0xd0-0xd7, 0xe0-0xe7, 0xf0-0xf7, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 41/53] target/i386: clarify (un)signedness of immediates from 0F3Ah opcodes Paolo Bonzini
2022-10-18 13:30 ` [PULL 42/53] target/i386: reimplement 0x0f 0x3a, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 43/53] target/i386: Use tcg gvec ops for pmovmskb Paolo Bonzini
2022-10-18 13:30 ` [PULL 44/53] target/i386: reimplement 0x0f 0x38, add AVX Paolo Bonzini
2022-10-18 13:30 ` [PULL 45/53] target/i386: reimplement 0x0f 0xc2, 0xc4-0xc6, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 46/53] target/i386: reimplement 0x0f 0x10-0x17, " Paolo Bonzini
2022-10-18 13:30 ` [PULL 47/53] target/i386: reimplement 0x0f 0x28-0x2f, " Paolo Bonzini
2023-05-09 10:52 ` Peter Maydell
2022-10-18 13:30 ` [PULL 48/53] target/i386: implement XSAVE and XRSTOR of AVX registers Paolo Bonzini
2022-10-18 13:30 ` [PULL 49/53] target/i386: implement VLDMXCSR/VSTMXCSR Paolo Bonzini
2022-10-18 13:30 ` [PULL 50/53] target/i386: Enable AVX cpuid bits when using TCG Paolo Bonzini
2022-10-18 13:30 ` [PULL 51/53] tests/tcg: extend SSE tests to AVX Paolo Bonzini
2022-10-18 13:30 ` Paolo Bonzini [this message]
2022-10-18 13:30 ` [PULL 53/53] target/i386: remove old SSE decoder Paolo Bonzini
2022-10-18 20:01 ` [PULL 00/53] target/i386, scsi, build patches for 2022-10-18 Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221018133042.856368-53-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).