* [PATCH v5 1/3] tests/lcitool: Rename non-Debian specific helper
2022-10-28 9:56 [PATCH v5 0/3] tests/docker: update fedora-win[32|64]-cross with lcitool Philippe Mathieu-Daudé
@ 2022-10-28 9:56 ` Philippe Mathieu-Daudé
2022-10-28 9:56 ` [PATCH v5 2/3] tests/lcitool: Refresh to latest libvirt-ci module Philippe Mathieu-Daudé
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2022-10-28 9:56 UTC (permalink / raw)
To: qemu-devel
Cc: Thomas Huth, Wainer dos Santos Moschetta, Beraldo Leal,
Philippe Mathieu-Daudé, Alex Bennée,
Daniel P . Berrange, Richard Henderson
From: Alex Bennée <alex.bennee@linaro.org>
This helper is not Debian specific, rename it to cross_build().
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-10-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
tests/lcitool/refresh | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/tests/lcitool/refresh b/tests/lcitool/refresh
index e45c99adbe..a6a7c23c1d 100755
--- a/tests/lcitool/refresh
+++ b/tests/lcitool/refresh
@@ -93,7 +93,7 @@ debian11_extras = [
]
-def debian_cross_build(prefix, targets):
+def cross_build(prefix, targets):
conf = "ENV QEMU_CONFIGURE_OPTS --cross-prefix=%s\n" % (prefix)
targets = "ENV DEF_TARGET_LIST %s\n" % (targets)
return "".join([conf, targets])
@@ -121,45 +121,45 @@ try:
#
generate_dockerfile("debian-amd64-cross", "debian-11",
cross="x86_64",
- trailer=debian_cross_build("x86_64-linux-gnu-",
- "x86_64-softmmu,"
- "x86_64-linux-user,"
- "i386-softmmu,i386-linux-user"))
+ trailer=cross_build("x86_64-linux-gnu-",
+ "x86_64-softmmu,"
+ "x86_64-linux-user,"
+ "i386-softmmu,i386-linux-user"))
generate_dockerfile("debian-arm64-cross", "debian-11",
cross="aarch64",
- trailer=debian_cross_build("aarch64-linux-gnu-",
- "aarch64-softmmu,aarch64-linux-user"))
+ trailer=cross_build("aarch64-linux-gnu-",
+ "aarch64-softmmu,aarch64-linux-user"))
generate_dockerfile("debian-armel-cross", "debian-11",
cross="armv6l",
- trailer=debian_cross_build("arm-linux-gnueabi-",
- "arm-softmmu,arm-linux-user,armeb-linux-user"))
+ trailer=cross_build("arm-linux-gnueabi-",
+ "arm-softmmu,arm-linux-user,armeb-linux-user"))
generate_dockerfile("debian-armhf-cross", "debian-11",
cross="armv7l",
- trailer=debian_cross_build("arm-linux-gnueabihf-",
- "arm-softmmu,arm-linux-user"))
+ trailer=cross_build("arm-linux-gnueabihf-",
+ "arm-softmmu,arm-linux-user"))
generate_dockerfile("debian-mips64el-cross", "debian-11",
cross="mips64el",
- trailer=debian_cross_build("mips64el-linux-gnuabi64-",
- "mips64el-softmmu,mips64el-linux-user"))
+ trailer=cross_build("mips64el-linux-gnuabi64-",
+ "mips64el-softmmu,mips64el-linux-user"))
generate_dockerfile("debian-mipsel-cross", "debian-11",
cross="mipsel",
- trailer=debian_cross_build("mipsel-linux-gnu-",
- "mipsel-softmmu,mipsel-linux-user"))
+ trailer=cross_build("mipsel-linux-gnu-",
+ "mipsel-softmmu,mipsel-linux-user"))
generate_dockerfile("debian-ppc64el-cross", "debian-11",
cross="ppc64le",
- trailer=debian_cross_build("powerpc64le-linux-gnu-",
- "ppc64-softmmu,ppc64-linux-user"))
+ trailer=cross_build("powerpc64le-linux-gnu-",
+ "ppc64-softmmu,ppc64-linux-user"))
generate_dockerfile("debian-s390x-cross", "debian-11",
cross="s390x",
- trailer=debian_cross_build("s390x-linux-gnu-",
- "s390x-softmmu,s390x-linux-user"))
+ trailer=cross_build("s390x-linux-gnu-",
+ "s390x-softmmu,s390x-linux-user"))
#
# Cirrus packages lists for GitLab
--
2.37.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v5 2/3] tests/lcitool: Refresh to latest libvirt-ci module
2022-10-28 9:56 [PATCH v5 0/3] tests/docker: update fedora-win[32|64]-cross with lcitool Philippe Mathieu-Daudé
2022-10-28 9:56 ` [PATCH v5 1/3] tests/lcitool: Rename non-Debian specific helper Philippe Mathieu-Daudé
@ 2022-10-28 9:56 ` Philippe Mathieu-Daudé
2022-10-28 10:05 ` Philippe Mathieu-Daudé
2022-10-28 9:56 ` [PATCH v5 3/3] tests/docker: update fedora-win[32|64]-cross with lcitool Philippe Mathieu-Daudé
2022-10-28 10:00 ` [PATCH v5 0/3] " Philippe Mathieu-Daudé
3 siblings, 1 reply; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2022-10-28 9:56 UTC (permalink / raw)
To: qemu-devel
Cc: Thomas Huth, Wainer dos Santos Moschetta, Beraldo Leal,
Philippe Mathieu-Daudé, Alex Bennée,
Daniel P . Berrange, Richard Henderson
From: Alex Bennée <alex.bennee@linaro.org>
We need an updated lcitool for this to deal with the weirdness
of a 32bit nsis tool for both 32 and 64 bit builds. As a result
there are some minor whitespace and re-order changes in a bunch
of the docker files.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-10-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
tests/docker/dockerfiles/alpine.docker | 2 +-
tests/docker/dockerfiles/centos8.docker | 2 +-
.../dockerfiles/debian-amd64-cross.docker | 234 ++++++++---------
tests/docker/dockerfiles/debian-amd64.docker | 236 +++++++++---------
.../dockerfiles/debian-arm64-cross.docker | 232 ++++++++---------
.../dockerfiles/debian-armel-cross.docker | 230 ++++++++---------
.../dockerfiles/debian-armhf-cross.docker | 232 ++++++++---------
.../dockerfiles/debian-mips64el-cross.docker | 226 ++++++++---------
.../dockerfiles/debian-mipsel-cross.docker | 226 ++++++++---------
.../dockerfiles/debian-ppc64el-cross.docker | 230 ++++++++---------
.../dockerfiles/debian-s390x-cross.docker | 228 ++++++++---------
tests/docker/dockerfiles/fedora.docker | 230 ++++++++---------
tests/docker/dockerfiles/opensuse-leap.docker | 2 +-
tests/docker/dockerfiles/ubuntu2004.docker | 234 ++++++++---------
tests/lcitool/libvirt-ci | 2 +-
15 files changed, 1273 insertions(+), 1273 deletions(-)
diff --git a/tests/docker/dockerfiles/alpine.docker b/tests/docker/dockerfiles/alpine.docker
index 9b7541261a..a854ae6b78 100644
--- a/tests/docker/dockerfiles/alpine.docker
+++ b/tests/docker/dockerfiles/alpine.docker
@@ -119,8 +119,8 @@ RUN apk update && \
ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/g++ && \
ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
diff --git a/tests/docker/dockerfiles/centos8.docker b/tests/docker/dockerfiles/centos8.docker
index d89113c0df..1f70d41aeb 100644
--- a/tests/docker/dockerfiles/centos8.docker
+++ b/tests/docker/dockerfiles/centos8.docker
@@ -130,8 +130,8 @@ RUN dnf distro-sync -y && \
ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/g++ && \
ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
diff --git a/tests/docker/dockerfiles/debian-amd64-cross.docker b/tests/docker/dockerfiles/debian-amd64-cross.docker
index 9047759e76..8311024632 100644
--- a/tests/docker/dockerfiles/debian-amd64-cross.docker
+++ b/tests/docker/dockerfiles/debian-amd64-cross.docker
@@ -11,62 +11,62 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
apt-get install -y eatmydata && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y \
- bash \
- bc \
- bison \
- bsdextrautils \
- bzip2 \
- ca-certificates \
- ccache \
- dbus \
- debianutils \
- diffutils \
- exuberant-ctags \
- findutils \
- flex \
- gcovr \
- genisoimage \
- gettext \
- git \
- hostname \
- libglib2.0-dev \
- libpcre2-dev \
- libspice-protocol-dev \
- llvm \
- locales \
- make \
- meson \
- ncat \
- ninja-build \
- openssh-client \
- perl-base \
- pkgconf \
- python3 \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-sphinx \
- python3-sphinx-rtd-theme \
- python3-venv \
- python3-yaml \
- rpm2cpio \
- sed \
- sparse \
- tar \
- tesseract-ocr \
- tesseract-ocr-eng \
- texinfo && \
+ bash \
+ bc \
+ bison \
+ bsdextrautils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libglib2.0-dev \
+ libpcre2-dev \
+ libspice-protocol-dev \
+ llvm \
+ locales \
+ make \
+ meson \
+ ncat \
+ ninja-build \
+ openssh-client \
+ perl-base \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ sparse \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ texinfo && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
dpkg-reconfigure locales
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
RUN export DEBIAN_FRONTEND=noninteractive && \
dpkg --add-architecture amd64 && \
@@ -74,76 +74,76 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y dpkg-dev && \
eatmydata apt-get install --no-install-recommends -y \
- g++-x86-64-linux-gnu \
- gcc-x86-64-linux-gnu \
- libaio-dev:amd64 \
- libasan5:amd64 \
- libasound2-dev:amd64 \
- libattr1-dev:amd64 \
- libbpf-dev:amd64 \
- libbrlapi-dev:amd64 \
- libbz2-dev:amd64 \
- libc6-dev:amd64 \
- libcacard-dev:amd64 \
- libcap-ng-dev:amd64 \
- libcapstone-dev:amd64 \
- libcmocka-dev:amd64 \
- libcurl4-gnutls-dev:amd64 \
- libdaxctl-dev:amd64 \
- libdrm-dev:amd64 \
- libepoxy-dev:amd64 \
- libfdt-dev:amd64 \
- libffi-dev:amd64 \
- libfuse3-dev:amd64 \
- libgbm-dev:amd64 \
- libgcrypt20-dev:amd64 \
- libglib2.0-dev:amd64 \
- libglusterfs-dev:amd64 \
- libgnutls28-dev:amd64 \
- libgtk-3-dev:amd64 \
- libibumad-dev:amd64 \
- libibverbs-dev:amd64 \
- libiscsi-dev:amd64 \
- libjemalloc-dev:amd64 \
- libjpeg62-turbo-dev:amd64 \
- libjson-c-dev:amd64 \
- liblttng-ust-dev:amd64 \
- liblzo2-dev:amd64 \
- libncursesw5-dev:amd64 \
- libnfs-dev:amd64 \
- libnuma-dev:amd64 \
- libpam0g-dev:amd64 \
- libpixman-1-dev:amd64 \
- libpmem-dev:amd64 \
- libpng-dev:amd64 \
- libpulse-dev:amd64 \
- librbd-dev:amd64 \
- librdmacm-dev:amd64 \
- libsasl2-dev:amd64 \
- libsdl2-dev:amd64 \
- libsdl2-image-dev:amd64 \
- libseccomp-dev:amd64 \
- libselinux1-dev:amd64 \
- libslirp-dev:amd64 \
- libsnappy-dev:amd64 \
- libspice-server-dev:amd64 \
- libssh-gcrypt-dev:amd64 \
- libsystemd-dev:amd64 \
- libtasn1-6-dev:amd64 \
- libubsan1:amd64 \
- libudev-dev:amd64 \
- liburing-dev:amd64 \
- libusb-1.0-0-dev:amd64 \
- libusbredirhost-dev:amd64 \
- libvdeplug-dev:amd64 \
- libvirglrenderer-dev:amd64 \
- libvte-2.91-dev:amd64 \
- libxen-dev:amd64 \
- libzstd-dev:amd64 \
- nettle-dev:amd64 \
- systemtap-sdt-dev:amd64 \
- xfslibs-dev:amd64 \
- zlib1g-dev:amd64 && \
+ g++-x86-64-linux-gnu \
+ gcc-x86-64-linux-gnu \
+ libaio-dev:amd64 \
+ libasan5:amd64 \
+ libasound2-dev:amd64 \
+ libattr1-dev:amd64 \
+ libbpf-dev:amd64 \
+ libbrlapi-dev:amd64 \
+ libbz2-dev:amd64 \
+ libc6-dev:amd64 \
+ libcacard-dev:amd64 \
+ libcap-ng-dev:amd64 \
+ libcapstone-dev:amd64 \
+ libcmocka-dev:amd64 \
+ libcurl4-gnutls-dev:amd64 \
+ libdaxctl-dev:amd64 \
+ libdrm-dev:amd64 \
+ libepoxy-dev:amd64 \
+ libfdt-dev:amd64 \
+ libffi-dev:amd64 \
+ libfuse3-dev:amd64 \
+ libgbm-dev:amd64 \
+ libgcrypt20-dev:amd64 \
+ libglib2.0-dev:amd64 \
+ libglusterfs-dev:amd64 \
+ libgnutls28-dev:amd64 \
+ libgtk-3-dev:amd64 \
+ libibumad-dev:amd64 \
+ libibverbs-dev:amd64 \
+ libiscsi-dev:amd64 \
+ libjemalloc-dev:amd64 \
+ libjpeg62-turbo-dev:amd64 \
+ libjson-c-dev:amd64 \
+ liblttng-ust-dev:amd64 \
+ liblzo2-dev:amd64 \
+ libncursesw5-dev:amd64 \
+ libnfs-dev:amd64 \
+ libnuma-dev:amd64 \
+ libpam0g-dev:amd64 \
+ libpixman-1-dev:amd64 \
+ libpmem-dev:amd64 \
+ libpng-dev:amd64 \
+ libpulse-dev:amd64 \
+ librbd-dev:amd64 \
+ librdmacm-dev:amd64 \
+ libsasl2-dev:amd64 \
+ libsdl2-dev:amd64 \
+ libsdl2-image-dev:amd64 \
+ libseccomp-dev:amd64 \
+ libselinux1-dev:amd64 \
+ libslirp-dev:amd64 \
+ libsnappy-dev:amd64 \
+ libspice-server-dev:amd64 \
+ libssh-gcrypt-dev:amd64 \
+ libsystemd-dev:amd64 \
+ libtasn1-6-dev:amd64 \
+ libubsan1:amd64 \
+ libudev-dev:amd64 \
+ liburing-dev:amd64 \
+ libusb-1.0-0-dev:amd64 \
+ libusbredirhost-dev:amd64 \
+ libvdeplug-dev:amd64 \
+ libvirglrenderer-dev:amd64 \
+ libvte-2.91-dev:amd64 \
+ libxen-dev:amd64 \
+ libzstd-dev:amd64 \
+ nettle-dev:amd64 \
+ systemtap-sdt-dev:amd64 \
+ xfslibs-dev:amd64 \
+ zlib1g-dev:amd64 && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
mkdir -p /usr/local/share/meson/cross && \
diff --git a/tests/docker/dockerfiles/debian-amd64.docker b/tests/docker/dockerfiles/debian-amd64.docker
index a8b728ca64..6db3079321 100644
--- a/tests/docker/dockerfiles/debian-amd64.docker
+++ b/tests/docker/dockerfiles/debian-amd64.docker
@@ -11,123 +11,123 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
apt-get install -y eatmydata && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y \
- bash \
- bc \
- bison \
- bsdextrautils \
- bzip2 \
- ca-certificates \
- ccache \
- clang \
- dbus \
- debianutils \
- diffutils \
- exuberant-ctags \
- findutils \
- flex \
- g++ \
- gcc \
- gcovr \
- genisoimage \
- gettext \
- git \
- hostname \
- libaio-dev \
- libasan5 \
- libasound2-dev \
- libattr1-dev \
- libbpf-dev \
- libbrlapi-dev \
- libbz2-dev \
- libc6-dev \
- libcacard-dev \
- libcap-ng-dev \
- libcapstone-dev \
- libcmocka-dev \
- libcurl4-gnutls-dev \
- libdaxctl-dev \
- libdrm-dev \
- libepoxy-dev \
- libfdt-dev \
- libffi-dev \
- libfuse3-dev \
- libgbm-dev \
- libgcrypt20-dev \
- libglib2.0-dev \
- libglusterfs-dev \
- libgnutls28-dev \
- libgtk-3-dev \
- libibumad-dev \
- libibverbs-dev \
- libiscsi-dev \
- libjemalloc-dev \
- libjpeg62-turbo-dev \
- libjson-c-dev \
- liblttng-ust-dev \
- liblzo2-dev \
- libncursesw5-dev \
- libnfs-dev \
- libnuma-dev \
- libpam0g-dev \
- libpcre2-dev \
- libpixman-1-dev \
- libpmem-dev \
- libpng-dev \
- libpulse-dev \
- librbd-dev \
- librdmacm-dev \
- libsasl2-dev \
- libsdl2-dev \
- libsdl2-image-dev \
- libseccomp-dev \
- libselinux1-dev \
- libslirp-dev \
- libsnappy-dev \
- libspice-protocol-dev \
- libspice-server-dev \
- libssh-gcrypt-dev \
- libsystemd-dev \
- libtasn1-6-dev \
- libubsan1 \
- libudev-dev \
- liburing-dev \
- libusb-1.0-0-dev \
- libusbredirhost-dev \
- libvdeplug-dev \
- libvirglrenderer-dev \
- libvte-2.91-dev \
- libxen-dev \
- libzstd-dev \
- llvm \
- locales \
- make \
- meson \
- multipath-tools \
- ncat \
- nettle-dev \
- ninja-build \
- openssh-client \
- perl-base \
- pkgconf \
- python3 \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-sphinx \
- python3-sphinx-rtd-theme \
- python3-venv \
- python3-yaml \
- rpm2cpio \
- sed \
- sparse \
- systemtap-sdt-dev \
- tar \
- tesseract-ocr \
- tesseract-ocr-eng \
- texinfo \
- xfslibs-dev \
- zlib1g-dev && \
+ bash \
+ bc \
+ bison \
+ bsdextrautils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ clang \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ g++ \
+ gcc \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libaio-dev \
+ libasan5 \
+ libasound2-dev \
+ libattr1-dev \
+ libbpf-dev \
+ libbrlapi-dev \
+ libbz2-dev \
+ libc6-dev \
+ libcacard-dev \
+ libcap-ng-dev \
+ libcapstone-dev \
+ libcmocka-dev \
+ libcurl4-gnutls-dev \
+ libdaxctl-dev \
+ libdrm-dev \
+ libepoxy-dev \
+ libfdt-dev \
+ libffi-dev \
+ libfuse3-dev \
+ libgbm-dev \
+ libgcrypt20-dev \
+ libglib2.0-dev \
+ libglusterfs-dev \
+ libgnutls28-dev \
+ libgtk-3-dev \
+ libibumad-dev \
+ libibverbs-dev \
+ libiscsi-dev \
+ libjemalloc-dev \
+ libjpeg62-turbo-dev \
+ libjson-c-dev \
+ liblttng-ust-dev \
+ liblzo2-dev \
+ libncursesw5-dev \
+ libnfs-dev \
+ libnuma-dev \
+ libpam0g-dev \
+ libpcre2-dev \
+ libpixman-1-dev \
+ libpmem-dev \
+ libpng-dev \
+ libpulse-dev \
+ librbd-dev \
+ librdmacm-dev \
+ libsasl2-dev \
+ libsdl2-dev \
+ libsdl2-image-dev \
+ libseccomp-dev \
+ libselinux1-dev \
+ libslirp-dev \
+ libsnappy-dev \
+ libspice-protocol-dev \
+ libspice-server-dev \
+ libssh-gcrypt-dev \
+ libsystemd-dev \
+ libtasn1-6-dev \
+ libubsan1 \
+ libudev-dev \
+ liburing-dev \
+ libusb-1.0-0-dev \
+ libusbredirhost-dev \
+ libvdeplug-dev \
+ libvirglrenderer-dev \
+ libvte-2.91-dev \
+ libxen-dev \
+ libzstd-dev \
+ llvm \
+ locales \
+ make \
+ meson \
+ multipath-tools \
+ ncat \
+ nettle-dev \
+ ninja-build \
+ openssh-client \
+ perl-base \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ sparse \
+ systemtap-sdt-dev \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ texinfo \
+ xfslibs-dev \
+ zlib1g-dev && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
@@ -140,11 +140,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/g++ && \
ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
# netmap/cscope/global
RUN DEBIAN_FRONTEND=noninteractive eatmydata \
apt install -y --no-install-recommends \
diff --git a/tests/docker/dockerfiles/debian-arm64-cross.docker b/tests/docker/dockerfiles/debian-arm64-cross.docker
index 17a5709245..1fbe2b1376 100644
--- a/tests/docker/dockerfiles/debian-arm64-cross.docker
+++ b/tests/docker/dockerfiles/debian-arm64-cross.docker
@@ -11,62 +11,62 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
apt-get install -y eatmydata && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y \
- bash \
- bc \
- bison \
- bsdextrautils \
- bzip2 \
- ca-certificates \
- ccache \
- dbus \
- debianutils \
- diffutils \
- exuberant-ctags \
- findutils \
- flex \
- gcovr \
- genisoimage \
- gettext \
- git \
- hostname \
- libglib2.0-dev \
- libpcre2-dev \
- libspice-protocol-dev \
- llvm \
- locales \
- make \
- meson \
- ncat \
- ninja-build \
- openssh-client \
- perl-base \
- pkgconf \
- python3 \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-sphinx \
- python3-sphinx-rtd-theme \
- python3-venv \
- python3-yaml \
- rpm2cpio \
- sed \
- sparse \
- tar \
- tesseract-ocr \
- tesseract-ocr-eng \
- texinfo && \
+ bash \
+ bc \
+ bison \
+ bsdextrautils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libglib2.0-dev \
+ libpcre2-dev \
+ libspice-protocol-dev \
+ llvm \
+ locales \
+ make \
+ meson \
+ ncat \
+ ninja-build \
+ openssh-client \
+ perl-base \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ sparse \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ texinfo && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
dpkg-reconfigure locales
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
RUN export DEBIAN_FRONTEND=noninteractive && \
dpkg --add-architecture arm64 && \
@@ -74,75 +74,75 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y dpkg-dev && \
eatmydata apt-get install --no-install-recommends -y \
- g++-aarch64-linux-gnu \
- gcc-aarch64-linux-gnu \
- libaio-dev:arm64 \
- libasan5:arm64 \
- libasound2-dev:arm64 \
- libattr1-dev:arm64 \
- libbpf-dev:arm64 \
- libbrlapi-dev:arm64 \
- libbz2-dev:arm64 \
- libc6-dev:arm64 \
- libcacard-dev:arm64 \
- libcap-ng-dev:arm64 \
- libcapstone-dev:arm64 \
- libcmocka-dev:arm64 \
- libcurl4-gnutls-dev:arm64 \
- libdaxctl-dev:arm64 \
- libdrm-dev:arm64 \
- libepoxy-dev:arm64 \
- libfdt-dev:arm64 \
- libffi-dev:arm64 \
- libfuse3-dev:arm64 \
- libgbm-dev:arm64 \
- libgcrypt20-dev:arm64 \
- libglib2.0-dev:arm64 \
- libglusterfs-dev:arm64 \
- libgnutls28-dev:arm64 \
- libgtk-3-dev:arm64 \
- libibumad-dev:arm64 \
- libibverbs-dev:arm64 \
- libiscsi-dev:arm64 \
- libjemalloc-dev:arm64 \
- libjpeg62-turbo-dev:arm64 \
- libjson-c-dev:arm64 \
- liblttng-ust-dev:arm64 \
- liblzo2-dev:arm64 \
- libncursesw5-dev:arm64 \
- libnfs-dev:arm64 \
- libnuma-dev:arm64 \
- libpam0g-dev:arm64 \
- libpixman-1-dev:arm64 \
- libpng-dev:arm64 \
- libpulse-dev:arm64 \
- librbd-dev:arm64 \
- librdmacm-dev:arm64 \
- libsasl2-dev:arm64 \
- libsdl2-dev:arm64 \
- libsdl2-image-dev:arm64 \
- libseccomp-dev:arm64 \
- libselinux1-dev:arm64 \
- libslirp-dev:arm64 \
- libsnappy-dev:arm64 \
- libspice-server-dev:arm64 \
- libssh-gcrypt-dev:arm64 \
- libsystemd-dev:arm64 \
- libtasn1-6-dev:arm64 \
- libubsan1:arm64 \
- libudev-dev:arm64 \
- liburing-dev:arm64 \
- libusb-1.0-0-dev:arm64 \
- libusbredirhost-dev:arm64 \
- libvdeplug-dev:arm64 \
- libvirglrenderer-dev:arm64 \
- libvte-2.91-dev:arm64 \
- libxen-dev:arm64 \
- libzstd-dev:arm64 \
- nettle-dev:arm64 \
- systemtap-sdt-dev:arm64 \
- xfslibs-dev:arm64 \
- zlib1g-dev:arm64 && \
+ g++-aarch64-linux-gnu \
+ gcc-aarch64-linux-gnu \
+ libaio-dev:arm64 \
+ libasan5:arm64 \
+ libasound2-dev:arm64 \
+ libattr1-dev:arm64 \
+ libbpf-dev:arm64 \
+ libbrlapi-dev:arm64 \
+ libbz2-dev:arm64 \
+ libc6-dev:arm64 \
+ libcacard-dev:arm64 \
+ libcap-ng-dev:arm64 \
+ libcapstone-dev:arm64 \
+ libcmocka-dev:arm64 \
+ libcurl4-gnutls-dev:arm64 \
+ libdaxctl-dev:arm64 \
+ libdrm-dev:arm64 \
+ libepoxy-dev:arm64 \
+ libfdt-dev:arm64 \
+ libffi-dev:arm64 \
+ libfuse3-dev:arm64 \
+ libgbm-dev:arm64 \
+ libgcrypt20-dev:arm64 \
+ libglib2.0-dev:arm64 \
+ libglusterfs-dev:arm64 \
+ libgnutls28-dev:arm64 \
+ libgtk-3-dev:arm64 \
+ libibumad-dev:arm64 \
+ libibverbs-dev:arm64 \
+ libiscsi-dev:arm64 \
+ libjemalloc-dev:arm64 \
+ libjpeg62-turbo-dev:arm64 \
+ libjson-c-dev:arm64 \
+ liblttng-ust-dev:arm64 \
+ liblzo2-dev:arm64 \
+ libncursesw5-dev:arm64 \
+ libnfs-dev:arm64 \
+ libnuma-dev:arm64 \
+ libpam0g-dev:arm64 \
+ libpixman-1-dev:arm64 \
+ libpng-dev:arm64 \
+ libpulse-dev:arm64 \
+ librbd-dev:arm64 \
+ librdmacm-dev:arm64 \
+ libsasl2-dev:arm64 \
+ libsdl2-dev:arm64 \
+ libsdl2-image-dev:arm64 \
+ libseccomp-dev:arm64 \
+ libselinux1-dev:arm64 \
+ libslirp-dev:arm64 \
+ libsnappy-dev:arm64 \
+ libspice-server-dev:arm64 \
+ libssh-gcrypt-dev:arm64 \
+ libsystemd-dev:arm64 \
+ libtasn1-6-dev:arm64 \
+ libubsan1:arm64 \
+ libudev-dev:arm64 \
+ liburing-dev:arm64 \
+ libusb-1.0-0-dev:arm64 \
+ libusbredirhost-dev:arm64 \
+ libvdeplug-dev:arm64 \
+ libvirglrenderer-dev:arm64 \
+ libvte-2.91-dev:arm64 \
+ libxen-dev:arm64 \
+ libzstd-dev:arm64 \
+ nettle-dev:arm64 \
+ systemtap-sdt-dev:arm64 \
+ xfslibs-dev:arm64 \
+ zlib1g-dev:arm64 && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
mkdir -p /usr/local/share/meson/cross && \
diff --git a/tests/docker/dockerfiles/debian-armel-cross.docker b/tests/docker/dockerfiles/debian-armel-cross.docker
index 701fc70db0..a430900505 100644
--- a/tests/docker/dockerfiles/debian-armel-cross.docker
+++ b/tests/docker/dockerfiles/debian-armel-cross.docker
@@ -11,62 +11,62 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
apt-get install -y eatmydata && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y \
- bash \
- bc \
- bison \
- bsdextrautils \
- bzip2 \
- ca-certificates \
- ccache \
- dbus \
- debianutils \
- diffutils \
- exuberant-ctags \
- findutils \
- flex \
- gcovr \
- genisoimage \
- gettext \
- git \
- hostname \
- libglib2.0-dev \
- libpcre2-dev \
- libspice-protocol-dev \
- llvm \
- locales \
- make \
- meson \
- ncat \
- ninja-build \
- openssh-client \
- perl-base \
- pkgconf \
- python3 \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-sphinx \
- python3-sphinx-rtd-theme \
- python3-venv \
- python3-yaml \
- rpm2cpio \
- sed \
- sparse \
- tar \
- tesseract-ocr \
- tesseract-ocr-eng \
- texinfo && \
+ bash \
+ bc \
+ bison \
+ bsdextrautils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libglib2.0-dev \
+ libpcre2-dev \
+ libspice-protocol-dev \
+ llvm \
+ locales \
+ make \
+ meson \
+ ncat \
+ ninja-build \
+ openssh-client \
+ perl-base \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ sparse \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ texinfo && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
dpkg-reconfigure locales
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
RUN export DEBIAN_FRONTEND=noninteractive && \
dpkg --add-architecture armel && \
@@ -74,74 +74,74 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y dpkg-dev && \
eatmydata apt-get install --no-install-recommends -y \
- g++-arm-linux-gnueabi \
- gcc-arm-linux-gnueabi \
- libaio-dev:armel \
- libasan5:armel \
- libasound2-dev:armel \
- libattr1-dev:armel \
- libbpf-dev:armel \
- libbrlapi-dev:armel \
- libbz2-dev:armel \
- libc6-dev:armel \
- libcacard-dev:armel \
- libcap-ng-dev:armel \
- libcapstone-dev:armel \
- libcmocka-dev:armel \
- libcurl4-gnutls-dev:armel \
- libdaxctl-dev:armel \
- libdrm-dev:armel \
- libepoxy-dev:armel \
- libfdt-dev:armel \
- libffi-dev:armel \
- libfuse3-dev:armel \
- libgbm-dev:armel \
- libgcrypt20-dev:armel \
- libglib2.0-dev:armel \
- libglusterfs-dev:armel \
- libgnutls28-dev:armel \
- libgtk-3-dev:armel \
- libibumad-dev:armel \
- libibverbs-dev:armel \
- libiscsi-dev:armel \
- libjemalloc-dev:armel \
- libjpeg62-turbo-dev:armel \
- libjson-c-dev:armel \
- liblttng-ust-dev:armel \
- liblzo2-dev:armel \
- libncursesw5-dev:armel \
- libnfs-dev:armel \
- libnuma-dev:armel \
- libpam0g-dev:armel \
- libpixman-1-dev:armel \
- libpng-dev:armel \
- libpulse-dev:armel \
- librbd-dev:armel \
- librdmacm-dev:armel \
- libsasl2-dev:armel \
- libsdl2-dev:armel \
- libsdl2-image-dev:armel \
- libseccomp-dev:armel \
- libselinux1-dev:armel \
- libslirp-dev:armel \
- libsnappy-dev:armel \
- libspice-server-dev:armel \
- libssh-gcrypt-dev:armel \
- libsystemd-dev:armel \
- libtasn1-6-dev:armel \
- libubsan1:armel \
- libudev-dev:armel \
- liburing-dev:armel \
- libusb-1.0-0-dev:armel \
- libusbredirhost-dev:armel \
- libvdeplug-dev:armel \
- libvirglrenderer-dev:armel \
- libvte-2.91-dev:armel \
- libzstd-dev:armel \
- nettle-dev:armel \
- systemtap-sdt-dev:armel \
- xfslibs-dev:armel \
- zlib1g-dev:armel && \
+ g++-arm-linux-gnueabi \
+ gcc-arm-linux-gnueabi \
+ libaio-dev:armel \
+ libasan5:armel \
+ libasound2-dev:armel \
+ libattr1-dev:armel \
+ libbpf-dev:armel \
+ libbrlapi-dev:armel \
+ libbz2-dev:armel \
+ libc6-dev:armel \
+ libcacard-dev:armel \
+ libcap-ng-dev:armel \
+ libcapstone-dev:armel \
+ libcmocka-dev:armel \
+ libcurl4-gnutls-dev:armel \
+ libdaxctl-dev:armel \
+ libdrm-dev:armel \
+ libepoxy-dev:armel \
+ libfdt-dev:armel \
+ libffi-dev:armel \
+ libfuse3-dev:armel \
+ libgbm-dev:armel \
+ libgcrypt20-dev:armel \
+ libglib2.0-dev:armel \
+ libglusterfs-dev:armel \
+ libgnutls28-dev:armel \
+ libgtk-3-dev:armel \
+ libibumad-dev:armel \
+ libibverbs-dev:armel \
+ libiscsi-dev:armel \
+ libjemalloc-dev:armel \
+ libjpeg62-turbo-dev:armel \
+ libjson-c-dev:armel \
+ liblttng-ust-dev:armel \
+ liblzo2-dev:armel \
+ libncursesw5-dev:armel \
+ libnfs-dev:armel \
+ libnuma-dev:armel \
+ libpam0g-dev:armel \
+ libpixman-1-dev:armel \
+ libpng-dev:armel \
+ libpulse-dev:armel \
+ librbd-dev:armel \
+ librdmacm-dev:armel \
+ libsasl2-dev:armel \
+ libsdl2-dev:armel \
+ libsdl2-image-dev:armel \
+ libseccomp-dev:armel \
+ libselinux1-dev:armel \
+ libslirp-dev:armel \
+ libsnappy-dev:armel \
+ libspice-server-dev:armel \
+ libssh-gcrypt-dev:armel \
+ libsystemd-dev:armel \
+ libtasn1-6-dev:armel \
+ libubsan1:armel \
+ libudev-dev:armel \
+ liburing-dev:armel \
+ libusb-1.0-0-dev:armel \
+ libusbredirhost-dev:armel \
+ libvdeplug-dev:armel \
+ libvirglrenderer-dev:armel \
+ libvte-2.91-dev:armel \
+ libzstd-dev:armel \
+ nettle-dev:armel \
+ systemtap-sdt-dev:armel \
+ xfslibs-dev:armel \
+ zlib1g-dev:armel && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
mkdir -p /usr/local/share/meson/cross && \
diff --git a/tests/docker/dockerfiles/debian-armhf-cross.docker b/tests/docker/dockerfiles/debian-armhf-cross.docker
index 5a11fe3900..4c54898420 100644
--- a/tests/docker/dockerfiles/debian-armhf-cross.docker
+++ b/tests/docker/dockerfiles/debian-armhf-cross.docker
@@ -11,62 +11,62 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
apt-get install -y eatmydata && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y \
- bash \
- bc \
- bison \
- bsdextrautils \
- bzip2 \
- ca-certificates \
- ccache \
- dbus \
- debianutils \
- diffutils \
- exuberant-ctags \
- findutils \
- flex \
- gcovr \
- genisoimage \
- gettext \
- git \
- hostname \
- libglib2.0-dev \
- libpcre2-dev \
- libspice-protocol-dev \
- llvm \
- locales \
- make \
- meson \
- ncat \
- ninja-build \
- openssh-client \
- perl-base \
- pkgconf \
- python3 \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-sphinx \
- python3-sphinx-rtd-theme \
- python3-venv \
- python3-yaml \
- rpm2cpio \
- sed \
- sparse \
- tar \
- tesseract-ocr \
- tesseract-ocr-eng \
- texinfo && \
+ bash \
+ bc \
+ bison \
+ bsdextrautils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libglib2.0-dev \
+ libpcre2-dev \
+ libspice-protocol-dev \
+ llvm \
+ locales \
+ make \
+ meson \
+ ncat \
+ ninja-build \
+ openssh-client \
+ perl-base \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ sparse \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ texinfo && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
dpkg-reconfigure locales
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
RUN export DEBIAN_FRONTEND=noninteractive && \
dpkg --add-architecture armhf && \
@@ -74,75 +74,75 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y dpkg-dev && \
eatmydata apt-get install --no-install-recommends -y \
- g++-arm-linux-gnueabihf \
- gcc-arm-linux-gnueabihf \
- libaio-dev:armhf \
- libasan5:armhf \
- libasound2-dev:armhf \
- libattr1-dev:armhf \
- libbpf-dev:armhf \
- libbrlapi-dev:armhf \
- libbz2-dev:armhf \
- libc6-dev:armhf \
- libcacard-dev:armhf \
- libcap-ng-dev:armhf \
- libcapstone-dev:armhf \
- libcmocka-dev:armhf \
- libcurl4-gnutls-dev:armhf \
- libdaxctl-dev:armhf \
- libdrm-dev:armhf \
- libepoxy-dev:armhf \
- libfdt-dev:armhf \
- libffi-dev:armhf \
- libfuse3-dev:armhf \
- libgbm-dev:armhf \
- libgcrypt20-dev:armhf \
- libglib2.0-dev:armhf \
- libglusterfs-dev:armhf \
- libgnutls28-dev:armhf \
- libgtk-3-dev:armhf \
- libibumad-dev:armhf \
- libibverbs-dev:armhf \
- libiscsi-dev:armhf \
- libjemalloc-dev:armhf \
- libjpeg62-turbo-dev:armhf \
- libjson-c-dev:armhf \
- liblttng-ust-dev:armhf \
- liblzo2-dev:armhf \
- libncursesw5-dev:armhf \
- libnfs-dev:armhf \
- libnuma-dev:armhf \
- libpam0g-dev:armhf \
- libpixman-1-dev:armhf \
- libpng-dev:armhf \
- libpulse-dev:armhf \
- librbd-dev:armhf \
- librdmacm-dev:armhf \
- libsasl2-dev:armhf \
- libsdl2-dev:armhf \
- libsdl2-image-dev:armhf \
- libseccomp-dev:armhf \
- libselinux1-dev:armhf \
- libslirp-dev:armhf \
- libsnappy-dev:armhf \
- libspice-server-dev:armhf \
- libssh-gcrypt-dev:armhf \
- libsystemd-dev:armhf \
- libtasn1-6-dev:armhf \
- libubsan1:armhf \
- libudev-dev:armhf \
- liburing-dev:armhf \
- libusb-1.0-0-dev:armhf \
- libusbredirhost-dev:armhf \
- libvdeplug-dev:armhf \
- libvirglrenderer-dev:armhf \
- libvte-2.91-dev:armhf \
- libxen-dev:armhf \
- libzstd-dev:armhf \
- nettle-dev:armhf \
- systemtap-sdt-dev:armhf \
- xfslibs-dev:armhf \
- zlib1g-dev:armhf && \
+ g++-arm-linux-gnueabihf \
+ gcc-arm-linux-gnueabihf \
+ libaio-dev:armhf \
+ libasan5:armhf \
+ libasound2-dev:armhf \
+ libattr1-dev:armhf \
+ libbpf-dev:armhf \
+ libbrlapi-dev:armhf \
+ libbz2-dev:armhf \
+ libc6-dev:armhf \
+ libcacard-dev:armhf \
+ libcap-ng-dev:armhf \
+ libcapstone-dev:armhf \
+ libcmocka-dev:armhf \
+ libcurl4-gnutls-dev:armhf \
+ libdaxctl-dev:armhf \
+ libdrm-dev:armhf \
+ libepoxy-dev:armhf \
+ libfdt-dev:armhf \
+ libffi-dev:armhf \
+ libfuse3-dev:armhf \
+ libgbm-dev:armhf \
+ libgcrypt20-dev:armhf \
+ libglib2.0-dev:armhf \
+ libglusterfs-dev:armhf \
+ libgnutls28-dev:armhf \
+ libgtk-3-dev:armhf \
+ libibumad-dev:armhf \
+ libibverbs-dev:armhf \
+ libiscsi-dev:armhf \
+ libjemalloc-dev:armhf \
+ libjpeg62-turbo-dev:armhf \
+ libjson-c-dev:armhf \
+ liblttng-ust-dev:armhf \
+ liblzo2-dev:armhf \
+ libncursesw5-dev:armhf \
+ libnfs-dev:armhf \
+ libnuma-dev:armhf \
+ libpam0g-dev:armhf \
+ libpixman-1-dev:armhf \
+ libpng-dev:armhf \
+ libpulse-dev:armhf \
+ librbd-dev:armhf \
+ librdmacm-dev:armhf \
+ libsasl2-dev:armhf \
+ libsdl2-dev:armhf \
+ libsdl2-image-dev:armhf \
+ libseccomp-dev:armhf \
+ libselinux1-dev:armhf \
+ libslirp-dev:armhf \
+ libsnappy-dev:armhf \
+ libspice-server-dev:armhf \
+ libssh-gcrypt-dev:armhf \
+ libsystemd-dev:armhf \
+ libtasn1-6-dev:armhf \
+ libubsan1:armhf \
+ libudev-dev:armhf \
+ liburing-dev:armhf \
+ libusb-1.0-0-dev:armhf \
+ libusbredirhost-dev:armhf \
+ libvdeplug-dev:armhf \
+ libvirglrenderer-dev:armhf \
+ libvte-2.91-dev:armhf \
+ libxen-dev:armhf \
+ libzstd-dev:armhf \
+ nettle-dev:armhf \
+ systemtap-sdt-dev:armhf \
+ xfslibs-dev:armhf \
+ zlib1g-dev:armhf && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
mkdir -p /usr/local/share/meson/cross && \
diff --git a/tests/docker/dockerfiles/debian-mips64el-cross.docker b/tests/docker/dockerfiles/debian-mips64el-cross.docker
index 9b90a4d6ff..c0d4b0df17 100644
--- a/tests/docker/dockerfiles/debian-mips64el-cross.docker
+++ b/tests/docker/dockerfiles/debian-mips64el-cross.docker
@@ -11,62 +11,62 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
apt-get install -y eatmydata && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y \
- bash \
- bc \
- bison \
- bsdextrautils \
- bzip2 \
- ca-certificates \
- ccache \
- dbus \
- debianutils \
- diffutils \
- exuberant-ctags \
- findutils \
- flex \
- gcovr \
- genisoimage \
- gettext \
- git \
- hostname \
- libglib2.0-dev \
- libpcre2-dev \
- libspice-protocol-dev \
- llvm \
- locales \
- make \
- meson \
- ncat \
- ninja-build \
- openssh-client \
- perl-base \
- pkgconf \
- python3 \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-sphinx \
- python3-sphinx-rtd-theme \
- python3-venv \
- python3-yaml \
- rpm2cpio \
- sed \
- sparse \
- tar \
- tesseract-ocr \
- tesseract-ocr-eng \
- texinfo && \
+ bash \
+ bc \
+ bison \
+ bsdextrautils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libglib2.0-dev \
+ libpcre2-dev \
+ libspice-protocol-dev \
+ llvm \
+ locales \
+ make \
+ meson \
+ ncat \
+ ninja-build \
+ openssh-client \
+ perl-base \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ sparse \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ texinfo && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
dpkg-reconfigure locales
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
RUN export DEBIAN_FRONTEND=noninteractive && \
dpkg --add-architecture mips64el && \
@@ -74,72 +74,72 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y dpkg-dev && \
eatmydata apt-get install --no-install-recommends -y \
- g++-mips64el-linux-gnuabi64 \
- gcc-mips64el-linux-gnuabi64 \
- libaio-dev:mips64el \
- libasound2-dev:mips64el \
- libattr1-dev:mips64el \
- libbpf-dev:mips64el \
- libbrlapi-dev:mips64el \
- libbz2-dev:mips64el \
- libc6-dev:mips64el \
- libcacard-dev:mips64el \
- libcap-ng-dev:mips64el \
- libcapstone-dev:mips64el \
- libcmocka-dev:mips64el \
- libcurl4-gnutls-dev:mips64el \
- libdaxctl-dev:mips64el \
- libdrm-dev:mips64el \
- libepoxy-dev:mips64el \
- libfdt-dev:mips64el \
- libffi-dev:mips64el \
- libfuse3-dev:mips64el \
- libgbm-dev:mips64el \
- libgcrypt20-dev:mips64el \
- libglib2.0-dev:mips64el \
- libglusterfs-dev:mips64el \
- libgnutls28-dev:mips64el \
- libgtk-3-dev:mips64el \
- libibumad-dev:mips64el \
- libibverbs-dev:mips64el \
- libiscsi-dev:mips64el \
- libjemalloc-dev:mips64el \
- libjpeg62-turbo-dev:mips64el \
- libjson-c-dev:mips64el \
- liblttng-ust-dev:mips64el \
- liblzo2-dev:mips64el \
- libncursesw5-dev:mips64el \
- libnfs-dev:mips64el \
- libnuma-dev:mips64el \
- libpam0g-dev:mips64el \
- libpixman-1-dev:mips64el \
- libpng-dev:mips64el \
- libpulse-dev:mips64el \
- librbd-dev:mips64el \
- librdmacm-dev:mips64el \
- libsasl2-dev:mips64el \
- libsdl2-dev:mips64el \
- libsdl2-image-dev:mips64el \
- libseccomp-dev:mips64el \
- libselinux1-dev:mips64el \
- libslirp-dev:mips64el \
- libsnappy-dev:mips64el \
- libspice-server-dev:mips64el \
- libssh-gcrypt-dev:mips64el \
- libsystemd-dev:mips64el \
- libtasn1-6-dev:mips64el \
- libudev-dev:mips64el \
- liburing-dev:mips64el \
- libusb-1.0-0-dev:mips64el \
- libusbredirhost-dev:mips64el \
- libvdeplug-dev:mips64el \
- libvirglrenderer-dev:mips64el \
- libvte-2.91-dev:mips64el \
- libzstd-dev:mips64el \
- nettle-dev:mips64el \
- systemtap-sdt-dev:mips64el \
- xfslibs-dev:mips64el \
- zlib1g-dev:mips64el && \
+ g++-mips64el-linux-gnuabi64 \
+ gcc-mips64el-linux-gnuabi64 \
+ libaio-dev:mips64el \
+ libasound2-dev:mips64el \
+ libattr1-dev:mips64el \
+ libbpf-dev:mips64el \
+ libbrlapi-dev:mips64el \
+ libbz2-dev:mips64el \
+ libc6-dev:mips64el \
+ libcacard-dev:mips64el \
+ libcap-ng-dev:mips64el \
+ libcapstone-dev:mips64el \
+ libcmocka-dev:mips64el \
+ libcurl4-gnutls-dev:mips64el \
+ libdaxctl-dev:mips64el \
+ libdrm-dev:mips64el \
+ libepoxy-dev:mips64el \
+ libfdt-dev:mips64el \
+ libffi-dev:mips64el \
+ libfuse3-dev:mips64el \
+ libgbm-dev:mips64el \
+ libgcrypt20-dev:mips64el \
+ libglib2.0-dev:mips64el \
+ libglusterfs-dev:mips64el \
+ libgnutls28-dev:mips64el \
+ libgtk-3-dev:mips64el \
+ libibumad-dev:mips64el \
+ libibverbs-dev:mips64el \
+ libiscsi-dev:mips64el \
+ libjemalloc-dev:mips64el \
+ libjpeg62-turbo-dev:mips64el \
+ libjson-c-dev:mips64el \
+ liblttng-ust-dev:mips64el \
+ liblzo2-dev:mips64el \
+ libncursesw5-dev:mips64el \
+ libnfs-dev:mips64el \
+ libnuma-dev:mips64el \
+ libpam0g-dev:mips64el \
+ libpixman-1-dev:mips64el \
+ libpng-dev:mips64el \
+ libpulse-dev:mips64el \
+ librbd-dev:mips64el \
+ librdmacm-dev:mips64el \
+ libsasl2-dev:mips64el \
+ libsdl2-dev:mips64el \
+ libsdl2-image-dev:mips64el \
+ libseccomp-dev:mips64el \
+ libselinux1-dev:mips64el \
+ libslirp-dev:mips64el \
+ libsnappy-dev:mips64el \
+ libspice-server-dev:mips64el \
+ libssh-gcrypt-dev:mips64el \
+ libsystemd-dev:mips64el \
+ libtasn1-6-dev:mips64el \
+ libudev-dev:mips64el \
+ liburing-dev:mips64el \
+ libusb-1.0-0-dev:mips64el \
+ libusbredirhost-dev:mips64el \
+ libvdeplug-dev:mips64el \
+ libvirglrenderer-dev:mips64el \
+ libvte-2.91-dev:mips64el \
+ libzstd-dev:mips64el \
+ nettle-dev:mips64el \
+ systemtap-sdt-dev:mips64el \
+ xfslibs-dev:mips64el \
+ zlib1g-dev:mips64el && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
mkdir -p /usr/local/share/meson/cross && \
diff --git a/tests/docker/dockerfiles/debian-mipsel-cross.docker b/tests/docker/dockerfiles/debian-mipsel-cross.docker
index 02feaf26cb..940b6794d1 100644
--- a/tests/docker/dockerfiles/debian-mipsel-cross.docker
+++ b/tests/docker/dockerfiles/debian-mipsel-cross.docker
@@ -11,62 +11,62 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
apt-get install -y eatmydata && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y \
- bash \
- bc \
- bison \
- bsdextrautils \
- bzip2 \
- ca-certificates \
- ccache \
- dbus \
- debianutils \
- diffutils \
- exuberant-ctags \
- findutils \
- flex \
- gcovr \
- genisoimage \
- gettext \
- git \
- hostname \
- libglib2.0-dev \
- libpcre2-dev \
- libspice-protocol-dev \
- llvm \
- locales \
- make \
- meson \
- ncat \
- ninja-build \
- openssh-client \
- perl-base \
- pkgconf \
- python3 \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-sphinx \
- python3-sphinx-rtd-theme \
- python3-venv \
- python3-yaml \
- rpm2cpio \
- sed \
- sparse \
- tar \
- tesseract-ocr \
- tesseract-ocr-eng \
- texinfo && \
+ bash \
+ bc \
+ bison \
+ bsdextrautils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libglib2.0-dev \
+ libpcre2-dev \
+ libspice-protocol-dev \
+ llvm \
+ locales \
+ make \
+ meson \
+ ncat \
+ ninja-build \
+ openssh-client \
+ perl-base \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ sparse \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ texinfo && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
dpkg-reconfigure locales
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
RUN export DEBIAN_FRONTEND=noninteractive && \
dpkg --add-architecture mipsel && \
@@ -74,72 +74,72 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y dpkg-dev && \
eatmydata apt-get install --no-install-recommends -y \
- g++-mipsel-linux-gnu \
- gcc-mipsel-linux-gnu \
- libaio-dev:mipsel \
- libasound2-dev:mipsel \
- libattr1-dev:mipsel \
- libbpf-dev:mipsel \
- libbrlapi-dev:mipsel \
- libbz2-dev:mipsel \
- libc6-dev:mipsel \
- libcacard-dev:mipsel \
- libcap-ng-dev:mipsel \
- libcapstone-dev:mipsel \
- libcmocka-dev:mipsel \
- libcurl4-gnutls-dev:mipsel \
- libdaxctl-dev:mipsel \
- libdrm-dev:mipsel \
- libepoxy-dev:mipsel \
- libfdt-dev:mipsel \
- libffi-dev:mipsel \
- libfuse3-dev:mipsel \
- libgbm-dev:mipsel \
- libgcrypt20-dev:mipsel \
- libglib2.0-dev:mipsel \
- libglusterfs-dev:mipsel \
- libgnutls28-dev:mipsel \
- libgtk-3-dev:mipsel \
- libibumad-dev:mipsel \
- libibverbs-dev:mipsel \
- libiscsi-dev:mipsel \
- libjemalloc-dev:mipsel \
- libjpeg62-turbo-dev:mipsel \
- libjson-c-dev:mipsel \
- liblttng-ust-dev:mipsel \
- liblzo2-dev:mipsel \
- libncursesw5-dev:mipsel \
- libnfs-dev:mipsel \
- libnuma-dev:mipsel \
- libpam0g-dev:mipsel \
- libpixman-1-dev:mipsel \
- libpng-dev:mipsel \
- libpulse-dev:mipsel \
- librbd-dev:mipsel \
- librdmacm-dev:mipsel \
- libsasl2-dev:mipsel \
- libsdl2-dev:mipsel \
- libsdl2-image-dev:mipsel \
- libseccomp-dev:mipsel \
- libselinux1-dev:mipsel \
- libslirp-dev:mipsel \
- libsnappy-dev:mipsel \
- libspice-server-dev:mipsel \
- libssh-gcrypt-dev:mipsel \
- libsystemd-dev:mipsel \
- libtasn1-6-dev:mipsel \
- libudev-dev:mipsel \
- liburing-dev:mipsel \
- libusb-1.0-0-dev:mipsel \
- libusbredirhost-dev:mipsel \
- libvdeplug-dev:mipsel \
- libvirglrenderer-dev:mipsel \
- libvte-2.91-dev:mipsel \
- libzstd-dev:mipsel \
- nettle-dev:mipsel \
- systemtap-sdt-dev:mipsel \
- xfslibs-dev:mipsel \
- zlib1g-dev:mipsel && \
+ g++-mipsel-linux-gnu \
+ gcc-mipsel-linux-gnu \
+ libaio-dev:mipsel \
+ libasound2-dev:mipsel \
+ libattr1-dev:mipsel \
+ libbpf-dev:mipsel \
+ libbrlapi-dev:mipsel \
+ libbz2-dev:mipsel \
+ libc6-dev:mipsel \
+ libcacard-dev:mipsel \
+ libcap-ng-dev:mipsel \
+ libcapstone-dev:mipsel \
+ libcmocka-dev:mipsel \
+ libcurl4-gnutls-dev:mipsel \
+ libdaxctl-dev:mipsel \
+ libdrm-dev:mipsel \
+ libepoxy-dev:mipsel \
+ libfdt-dev:mipsel \
+ libffi-dev:mipsel \
+ libfuse3-dev:mipsel \
+ libgbm-dev:mipsel \
+ libgcrypt20-dev:mipsel \
+ libglib2.0-dev:mipsel \
+ libglusterfs-dev:mipsel \
+ libgnutls28-dev:mipsel \
+ libgtk-3-dev:mipsel \
+ libibumad-dev:mipsel \
+ libibverbs-dev:mipsel \
+ libiscsi-dev:mipsel \
+ libjemalloc-dev:mipsel \
+ libjpeg62-turbo-dev:mipsel \
+ libjson-c-dev:mipsel \
+ liblttng-ust-dev:mipsel \
+ liblzo2-dev:mipsel \
+ libncursesw5-dev:mipsel \
+ libnfs-dev:mipsel \
+ libnuma-dev:mipsel \
+ libpam0g-dev:mipsel \
+ libpixman-1-dev:mipsel \
+ libpng-dev:mipsel \
+ libpulse-dev:mipsel \
+ librbd-dev:mipsel \
+ librdmacm-dev:mipsel \
+ libsasl2-dev:mipsel \
+ libsdl2-dev:mipsel \
+ libsdl2-image-dev:mipsel \
+ libseccomp-dev:mipsel \
+ libselinux1-dev:mipsel \
+ libslirp-dev:mipsel \
+ libsnappy-dev:mipsel \
+ libspice-server-dev:mipsel \
+ libssh-gcrypt-dev:mipsel \
+ libsystemd-dev:mipsel \
+ libtasn1-6-dev:mipsel \
+ libudev-dev:mipsel \
+ liburing-dev:mipsel \
+ libusb-1.0-0-dev:mipsel \
+ libusbredirhost-dev:mipsel \
+ libvdeplug-dev:mipsel \
+ libvirglrenderer-dev:mipsel \
+ libvte-2.91-dev:mipsel \
+ libzstd-dev:mipsel \
+ nettle-dev:mipsel \
+ systemtap-sdt-dev:mipsel \
+ xfslibs-dev:mipsel \
+ zlib1g-dev:mipsel && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
mkdir -p /usr/local/share/meson/cross && \
diff --git a/tests/docker/dockerfiles/debian-ppc64el-cross.docker b/tests/docker/dockerfiles/debian-ppc64el-cross.docker
index 97d3872ee2..2d59288622 100644
--- a/tests/docker/dockerfiles/debian-ppc64el-cross.docker
+++ b/tests/docker/dockerfiles/debian-ppc64el-cross.docker
@@ -11,62 +11,62 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
apt-get install -y eatmydata && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y \
- bash \
- bc \
- bison \
- bsdextrautils \
- bzip2 \
- ca-certificates \
- ccache \
- dbus \
- debianutils \
- diffutils \
- exuberant-ctags \
- findutils \
- flex \
- gcovr \
- genisoimage \
- gettext \
- git \
- hostname \
- libglib2.0-dev \
- libpcre2-dev \
- libspice-protocol-dev \
- llvm \
- locales \
- make \
- meson \
- ncat \
- ninja-build \
- openssh-client \
- perl-base \
- pkgconf \
- python3 \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-sphinx \
- python3-sphinx-rtd-theme \
- python3-venv \
- python3-yaml \
- rpm2cpio \
- sed \
- sparse \
- tar \
- tesseract-ocr \
- tesseract-ocr-eng \
- texinfo && \
+ bash \
+ bc \
+ bison \
+ bsdextrautils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libglib2.0-dev \
+ libpcre2-dev \
+ libspice-protocol-dev \
+ llvm \
+ locales \
+ make \
+ meson \
+ ncat \
+ ninja-build \
+ openssh-client \
+ perl-base \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ sparse \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ texinfo && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
dpkg-reconfigure locales
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
RUN export DEBIAN_FRONTEND=noninteractive && \
dpkg --add-architecture ppc64el && \
@@ -74,74 +74,74 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y dpkg-dev && \
eatmydata apt-get install --no-install-recommends -y \
- g++-powerpc64le-linux-gnu \
- gcc-powerpc64le-linux-gnu \
- libaio-dev:ppc64el \
- libasan5:ppc64el \
- libasound2-dev:ppc64el \
- libattr1-dev:ppc64el \
- libbpf-dev:ppc64el \
- libbrlapi-dev:ppc64el \
- libbz2-dev:ppc64el \
- libc6-dev:ppc64el \
- libcacard-dev:ppc64el \
- libcap-ng-dev:ppc64el \
- libcapstone-dev:ppc64el \
- libcmocka-dev:ppc64el \
- libcurl4-gnutls-dev:ppc64el \
- libdaxctl-dev:ppc64el \
- libdrm-dev:ppc64el \
- libepoxy-dev:ppc64el \
- libfdt-dev:ppc64el \
- libffi-dev:ppc64el \
- libfuse3-dev:ppc64el \
- libgbm-dev:ppc64el \
- libgcrypt20-dev:ppc64el \
- libglib2.0-dev:ppc64el \
- libglusterfs-dev:ppc64el \
- libgnutls28-dev:ppc64el \
- libgtk-3-dev:ppc64el \
- libibumad-dev:ppc64el \
- libibverbs-dev:ppc64el \
- libiscsi-dev:ppc64el \
- libjemalloc-dev:ppc64el \
- libjpeg62-turbo-dev:ppc64el \
- libjson-c-dev:ppc64el \
- liblttng-ust-dev:ppc64el \
- liblzo2-dev:ppc64el \
- libncursesw5-dev:ppc64el \
- libnfs-dev:ppc64el \
- libnuma-dev:ppc64el \
- libpam0g-dev:ppc64el \
- libpixman-1-dev:ppc64el \
- libpng-dev:ppc64el \
- libpulse-dev:ppc64el \
- librbd-dev:ppc64el \
- librdmacm-dev:ppc64el \
- libsasl2-dev:ppc64el \
- libsdl2-dev:ppc64el \
- libsdl2-image-dev:ppc64el \
- libseccomp-dev:ppc64el \
- libselinux1-dev:ppc64el \
- libslirp-dev:ppc64el \
- libsnappy-dev:ppc64el \
- libspice-server-dev:ppc64el \
- libssh-gcrypt-dev:ppc64el \
- libsystemd-dev:ppc64el \
- libtasn1-6-dev:ppc64el \
- libubsan1:ppc64el \
- libudev-dev:ppc64el \
- liburing-dev:ppc64el \
- libusb-1.0-0-dev:ppc64el \
- libusbredirhost-dev:ppc64el \
- libvdeplug-dev:ppc64el \
- libvirglrenderer-dev:ppc64el \
- libvte-2.91-dev:ppc64el \
- libzstd-dev:ppc64el \
- nettle-dev:ppc64el \
- systemtap-sdt-dev:ppc64el \
- xfslibs-dev:ppc64el \
- zlib1g-dev:ppc64el && \
+ g++-powerpc64le-linux-gnu \
+ gcc-powerpc64le-linux-gnu \
+ libaio-dev:ppc64el \
+ libasan5:ppc64el \
+ libasound2-dev:ppc64el \
+ libattr1-dev:ppc64el \
+ libbpf-dev:ppc64el \
+ libbrlapi-dev:ppc64el \
+ libbz2-dev:ppc64el \
+ libc6-dev:ppc64el \
+ libcacard-dev:ppc64el \
+ libcap-ng-dev:ppc64el \
+ libcapstone-dev:ppc64el \
+ libcmocka-dev:ppc64el \
+ libcurl4-gnutls-dev:ppc64el \
+ libdaxctl-dev:ppc64el \
+ libdrm-dev:ppc64el \
+ libepoxy-dev:ppc64el \
+ libfdt-dev:ppc64el \
+ libffi-dev:ppc64el \
+ libfuse3-dev:ppc64el \
+ libgbm-dev:ppc64el \
+ libgcrypt20-dev:ppc64el \
+ libglib2.0-dev:ppc64el \
+ libglusterfs-dev:ppc64el \
+ libgnutls28-dev:ppc64el \
+ libgtk-3-dev:ppc64el \
+ libibumad-dev:ppc64el \
+ libibverbs-dev:ppc64el \
+ libiscsi-dev:ppc64el \
+ libjemalloc-dev:ppc64el \
+ libjpeg62-turbo-dev:ppc64el \
+ libjson-c-dev:ppc64el \
+ liblttng-ust-dev:ppc64el \
+ liblzo2-dev:ppc64el \
+ libncursesw5-dev:ppc64el \
+ libnfs-dev:ppc64el \
+ libnuma-dev:ppc64el \
+ libpam0g-dev:ppc64el \
+ libpixman-1-dev:ppc64el \
+ libpng-dev:ppc64el \
+ libpulse-dev:ppc64el \
+ librbd-dev:ppc64el \
+ librdmacm-dev:ppc64el \
+ libsasl2-dev:ppc64el \
+ libsdl2-dev:ppc64el \
+ libsdl2-image-dev:ppc64el \
+ libseccomp-dev:ppc64el \
+ libselinux1-dev:ppc64el \
+ libslirp-dev:ppc64el \
+ libsnappy-dev:ppc64el \
+ libspice-server-dev:ppc64el \
+ libssh-gcrypt-dev:ppc64el \
+ libsystemd-dev:ppc64el \
+ libtasn1-6-dev:ppc64el \
+ libubsan1:ppc64el \
+ libudev-dev:ppc64el \
+ liburing-dev:ppc64el \
+ libusb-1.0-0-dev:ppc64el \
+ libusbredirhost-dev:ppc64el \
+ libvdeplug-dev:ppc64el \
+ libvirglrenderer-dev:ppc64el \
+ libvte-2.91-dev:ppc64el \
+ libzstd-dev:ppc64el \
+ nettle-dev:ppc64el \
+ systemtap-sdt-dev:ppc64el \
+ xfslibs-dev:ppc64el \
+ zlib1g-dev:ppc64el && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
mkdir -p /usr/local/share/meson/cross && \
diff --git a/tests/docker/dockerfiles/debian-s390x-cross.docker b/tests/docker/dockerfiles/debian-s390x-cross.docker
index 95585e9e56..a105c1066e 100644
--- a/tests/docker/dockerfiles/debian-s390x-cross.docker
+++ b/tests/docker/dockerfiles/debian-s390x-cross.docker
@@ -11,62 +11,62 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
apt-get install -y eatmydata && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y \
- bash \
- bc \
- bison \
- bsdextrautils \
- bzip2 \
- ca-certificates \
- ccache \
- dbus \
- debianutils \
- diffutils \
- exuberant-ctags \
- findutils \
- flex \
- gcovr \
- genisoimage \
- gettext \
- git \
- hostname \
- libglib2.0-dev \
- libpcre2-dev \
- libspice-protocol-dev \
- llvm \
- locales \
- make \
- meson \
- ncat \
- ninja-build \
- openssh-client \
- perl-base \
- pkgconf \
- python3 \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-sphinx \
- python3-sphinx-rtd-theme \
- python3-venv \
- python3-yaml \
- rpm2cpio \
- sed \
- sparse \
- tar \
- tesseract-ocr \
- tesseract-ocr-eng \
- texinfo && \
+ bash \
+ bc \
+ bison \
+ bsdextrautils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libglib2.0-dev \
+ libpcre2-dev \
+ libspice-protocol-dev \
+ llvm \
+ locales \
+ make \
+ meson \
+ ncat \
+ ninja-build \
+ openssh-client \
+ perl-base \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ sparse \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ texinfo && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
dpkg-reconfigure locales
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
RUN export DEBIAN_FRONTEND=noninteractive && \
dpkg --add-architecture s390x && \
@@ -74,73 +74,73 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y dpkg-dev && \
eatmydata apt-get install --no-install-recommends -y \
- g++-s390x-linux-gnu \
- gcc-s390x-linux-gnu \
- libaio-dev:s390x \
- libasan5:s390x \
- libasound2-dev:s390x \
- libattr1-dev:s390x \
- libbpf-dev:s390x \
- libbrlapi-dev:s390x \
- libbz2-dev:s390x \
- libc6-dev:s390x \
- libcacard-dev:s390x \
- libcap-ng-dev:s390x \
- libcapstone-dev:s390x \
- libcmocka-dev:s390x \
- libcurl4-gnutls-dev:s390x \
- libdaxctl-dev:s390x \
- libdrm-dev:s390x \
- libepoxy-dev:s390x \
- libfdt-dev:s390x \
- libffi-dev:s390x \
- libfuse3-dev:s390x \
- libgbm-dev:s390x \
- libgcrypt20-dev:s390x \
- libglib2.0-dev:s390x \
- libglusterfs-dev:s390x \
- libgnutls28-dev:s390x \
- libgtk-3-dev:s390x \
- libibumad-dev:s390x \
- libibverbs-dev:s390x \
- libiscsi-dev:s390x \
- libjemalloc-dev:s390x \
- libjpeg62-turbo-dev:s390x \
- libjson-c-dev:s390x \
- liblttng-ust-dev:s390x \
- liblzo2-dev:s390x \
- libncursesw5-dev:s390x \
- libnfs-dev:s390x \
- libnuma-dev:s390x \
- libpam0g-dev:s390x \
- libpixman-1-dev:s390x \
- libpng-dev:s390x \
- libpulse-dev:s390x \
- librbd-dev:s390x \
- librdmacm-dev:s390x \
- libsasl2-dev:s390x \
- libsdl2-dev:s390x \
- libsdl2-image-dev:s390x \
- libseccomp-dev:s390x \
- libselinux1-dev:s390x \
- libslirp-dev:s390x \
- libsnappy-dev:s390x \
- libssh-gcrypt-dev:s390x \
- libsystemd-dev:s390x \
- libtasn1-6-dev:s390x \
- libubsan1:s390x \
- libudev-dev:s390x \
- liburing-dev:s390x \
- libusb-1.0-0-dev:s390x \
- libusbredirhost-dev:s390x \
- libvdeplug-dev:s390x \
- libvirglrenderer-dev:s390x \
- libvte-2.91-dev:s390x \
- libzstd-dev:s390x \
- nettle-dev:s390x \
- systemtap-sdt-dev:s390x \
- xfslibs-dev:s390x \
- zlib1g-dev:s390x && \
+ g++-s390x-linux-gnu \
+ gcc-s390x-linux-gnu \
+ libaio-dev:s390x \
+ libasan5:s390x \
+ libasound2-dev:s390x \
+ libattr1-dev:s390x \
+ libbpf-dev:s390x \
+ libbrlapi-dev:s390x \
+ libbz2-dev:s390x \
+ libc6-dev:s390x \
+ libcacard-dev:s390x \
+ libcap-ng-dev:s390x \
+ libcapstone-dev:s390x \
+ libcmocka-dev:s390x \
+ libcurl4-gnutls-dev:s390x \
+ libdaxctl-dev:s390x \
+ libdrm-dev:s390x \
+ libepoxy-dev:s390x \
+ libfdt-dev:s390x \
+ libffi-dev:s390x \
+ libfuse3-dev:s390x \
+ libgbm-dev:s390x \
+ libgcrypt20-dev:s390x \
+ libglib2.0-dev:s390x \
+ libglusterfs-dev:s390x \
+ libgnutls28-dev:s390x \
+ libgtk-3-dev:s390x \
+ libibumad-dev:s390x \
+ libibverbs-dev:s390x \
+ libiscsi-dev:s390x \
+ libjemalloc-dev:s390x \
+ libjpeg62-turbo-dev:s390x \
+ libjson-c-dev:s390x \
+ liblttng-ust-dev:s390x \
+ liblzo2-dev:s390x \
+ libncursesw5-dev:s390x \
+ libnfs-dev:s390x \
+ libnuma-dev:s390x \
+ libpam0g-dev:s390x \
+ libpixman-1-dev:s390x \
+ libpng-dev:s390x \
+ libpulse-dev:s390x \
+ librbd-dev:s390x \
+ librdmacm-dev:s390x \
+ libsasl2-dev:s390x \
+ libsdl2-dev:s390x \
+ libsdl2-image-dev:s390x \
+ libseccomp-dev:s390x \
+ libselinux1-dev:s390x \
+ libslirp-dev:s390x \
+ libsnappy-dev:s390x \
+ libssh-gcrypt-dev:s390x \
+ libsystemd-dev:s390x \
+ libtasn1-6-dev:s390x \
+ libubsan1:s390x \
+ libudev-dev:s390x \
+ liburing-dev:s390x \
+ libusb-1.0-0-dev:s390x \
+ libusbredirhost-dev:s390x \
+ libvdeplug-dev:s390x \
+ libvirglrenderer-dev:s390x \
+ libvte-2.91-dev:s390x \
+ libzstd-dev:s390x \
+ nettle-dev:s390x \
+ systemtap-sdt-dev:s390x \
+ xfslibs-dev:s390x \
+ zlib1g-dev:s390x && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
mkdir -p /usr/local/share/meson/cross && \
diff --git a/tests/docker/dockerfiles/fedora.docker b/tests/docker/dockerfiles/fedora.docker
index fe84166ca1..d200c7fc10 100644
--- a/tests/docker/dockerfiles/fedora.docker
+++ b/tests/docker/dockerfiles/fedora.docker
@@ -18,120 +18,120 @@ exec "$@"' > /usr/bin/nosync && \
chmod +x /usr/bin/nosync && \
nosync dnf update -y && \
nosync dnf install -y \
- SDL2-devel \
- SDL2_image-devel \
- alsa-lib-devel \
- bash \
- bc \
- bison \
- brlapi-devel \
- bzip2 \
- bzip2-devel \
- ca-certificates \
- capstone-devel \
- ccache \
- clang \
- ctags \
- cyrus-sasl-devel \
- daxctl-devel \
- dbus-daemon \
- device-mapper-multipath-devel \
- diffutils \
- findutils \
- flex \
- fuse3-devel \
- gcc \
- gcc-c++ \
- gcovr \
- genisoimage \
- gettext \
- git \
- glib2-devel \
- glib2-static \
- glibc-langpack-en \
- glibc-static \
- glusterfs-api-devel \
- gnutls-devel \
- gtk3-devel \
- hostname \
- jemalloc-devel \
- json-c-devel \
- libaio-devel \
- libasan \
- libattr-devel \
- libbpf-devel \
- libcacard-devel \
- libcap-ng-devel \
- libcmocka-devel \
- libcurl-devel \
- libdrm-devel \
- libepoxy-devel \
- libfdt-devel \
- libffi-devel \
- libgcrypt-devel \
- libiscsi-devel \
- libjpeg-devel \
- libnfs-devel \
- libpmem-devel \
- libpng-devel \
- librbd-devel \
- libseccomp-devel \
- libselinux-devel \
- libslirp-devel \
- libssh-devel \
- libtasn1-devel \
- libubsan \
- liburing-devel \
- libusbx-devel \
- libzstd-devel \
- llvm \
- lttng-ust-devel \
- lzo-devel \
- make \
- mesa-libgbm-devel \
- meson \
- ncurses-devel \
- nettle-devel \
- ninja-build \
- nmap-ncat \
- numactl-devel \
- openssh-clients \
- pam-devel \
- pcre-static \
- perl-base \
- pixman-devel \
- pkgconfig \
- pulseaudio-libs-devel \
- python3 \
- python3-PyYAML \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-sphinx \
- python3-sphinx_rtd_theme \
- rdma-core-devel \
- rpm \
- sed \
- snappy-devel \
- sparse \
- spice-protocol \
- spice-server-devel \
- systemd-devel \
- systemtap-sdt-devel \
- tar \
- tesseract \
- tesseract-langpack-eng \
- texinfo \
- usbredir-devel \
- util-linux \
- virglrenderer-devel \
- vte291-devel \
- which \
- xen-devel \
- xfsprogs-devel \
- zlib-devel \
- zlib-static && \
+ SDL2-devel \
+ SDL2_image-devel \
+ alsa-lib-devel \
+ bash \
+ bc \
+ bison \
+ brlapi-devel \
+ bzip2 \
+ bzip2-devel \
+ ca-certificates \
+ capstone-devel \
+ ccache \
+ clang \
+ ctags \
+ cyrus-sasl-devel \
+ daxctl-devel \
+ dbus-daemon \
+ device-mapper-multipath-devel \
+ diffutils \
+ findutils \
+ flex \
+ fuse3-devel \
+ gcc \
+ gcc-c++ \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ glib2-devel \
+ glib2-static \
+ glibc-langpack-en \
+ glibc-static \
+ glusterfs-api-devel \
+ gnutls-devel \
+ gtk3-devel \
+ hostname \
+ jemalloc-devel \
+ json-c-devel \
+ libaio-devel \
+ libasan \
+ libattr-devel \
+ libbpf-devel \
+ libcacard-devel \
+ libcap-ng-devel \
+ libcmocka-devel \
+ libcurl-devel \
+ libdrm-devel \
+ libepoxy-devel \
+ libfdt-devel \
+ libffi-devel \
+ libgcrypt-devel \
+ libiscsi-devel \
+ libjpeg-devel \
+ libnfs-devel \
+ libpmem-devel \
+ libpng-devel \
+ librbd-devel \
+ libseccomp-devel \
+ libselinux-devel \
+ libslirp-devel \
+ libssh-devel \
+ libtasn1-devel \
+ libubsan \
+ liburing-devel \
+ libusbx-devel \
+ libzstd-devel \
+ llvm \
+ lttng-ust-devel \
+ lzo-devel \
+ make \
+ mesa-libgbm-devel \
+ meson \
+ ncurses-devel \
+ nettle-devel \
+ ninja-build \
+ nmap-ncat \
+ numactl-devel \
+ openssh-clients \
+ pam-devel \
+ pcre-static \
+ perl-base \
+ pixman-devel \
+ pkgconfig \
+ pulseaudio-libs-devel \
+ python3 \
+ python3-PyYAML \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx_rtd_theme \
+ rdma-core-devel \
+ rpm \
+ sed \
+ snappy-devel \
+ sparse \
+ spice-protocol \
+ spice-server-devel \
+ systemd-devel \
+ systemtap-sdt-devel \
+ tar \
+ tesseract \
+ tesseract-langpack-eng \
+ texinfo \
+ usbredir-devel \
+ util-linux \
+ virglrenderer-devel \
+ vte291-devel \
+ which \
+ xen-devel \
+ xfsprogs-devel \
+ zlib-devel \
+ zlib-static && \
nosync dnf autoremove -y && \
nosync dnf clean all -y && \
rpm -qa | sort > /packages.txt && \
@@ -142,8 +142,8 @@ exec "$@"' > /usr/bin/nosync && \
ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/g++ && \
ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
diff --git a/tests/docker/dockerfiles/opensuse-leap.docker b/tests/docker/dockerfiles/opensuse-leap.docker
index d80064756f..361979d6b3 100644
--- a/tests/docker/dockerfiles/opensuse-leap.docker
+++ b/tests/docker/dockerfiles/opensuse-leap.docker
@@ -132,8 +132,8 @@ RUN zypper update -y && \
RUN /usr/bin/pip3 install meson==0.56.0
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
diff --git a/tests/docker/dockerfiles/ubuntu2004.docker b/tests/docker/dockerfiles/ubuntu2004.docker
index 24594afc15..ac16383da7 100644
--- a/tests/docker/dockerfiles/ubuntu2004.docker
+++ b/tests/docker/dockerfiles/ubuntu2004.docker
@@ -11,122 +11,122 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
apt-get install -y eatmydata && \
eatmydata apt-get dist-upgrade -y && \
eatmydata apt-get install --no-install-recommends -y \
- bash \
- bc \
- bison \
- bsdmainutils \
- bzip2 \
- ca-certificates \
- ccache \
- clang \
- dbus \
- debianutils \
- diffutils \
- exuberant-ctags \
- findutils \
- flex \
- g++ \
- gcc \
- gcovr \
- genisoimage \
- gettext \
- git \
- hostname \
- libaio-dev \
- libasan5 \
- libasound2-dev \
- libattr1-dev \
- libbrlapi-dev \
- libbz2-dev \
- libc6-dev \
- libcacard-dev \
- libcap-ng-dev \
- libcapstone-dev \
- libcmocka-dev \
- libcurl4-gnutls-dev \
- libdaxctl-dev \
- libdrm-dev \
- libepoxy-dev \
- libfdt-dev \
- libffi-dev \
- libfuse3-dev \
- libgbm-dev \
- libgcrypt20-dev \
- libglib2.0-dev \
- libglusterfs-dev \
- libgnutls28-dev \
- libgtk-3-dev \
- libibumad-dev \
- libibverbs-dev \
- libiscsi-dev \
- libjemalloc-dev \
- libjpeg-turbo8-dev \
- libjson-c-dev \
- liblttng-ust-dev \
- liblzo2-dev \
- libncursesw5-dev \
- libnfs-dev \
- libnuma-dev \
- libpam0g-dev \
- libpcre2-dev \
- libpixman-1-dev \
- libpmem-dev \
- libpng-dev \
- libpulse-dev \
- librbd-dev \
- librdmacm-dev \
- libsasl2-dev \
- libsdl2-dev \
- libsdl2-image-dev \
- libseccomp-dev \
- libselinux1-dev \
- libslirp-dev \
- libsnappy-dev \
- libspice-protocol-dev \
- libspice-server-dev \
- libssh-dev \
- libsystemd-dev \
- libtasn1-6-dev \
- libubsan1 \
- libudev-dev \
- libusb-1.0-0-dev \
- libusbredirhost-dev \
- libvdeplug-dev \
- libvirglrenderer-dev \
- libvte-2.91-dev \
- libxen-dev \
- libzstd-dev \
- llvm \
- locales \
- make \
- multipath-tools \
- ncat \
- nettle-dev \
- ninja-build \
- openssh-client \
- perl-base \
- pkgconf \
- python3 \
- python3-numpy \
- python3-opencv \
- python3-pillow \
- python3-pip \
- python3-setuptools \
- python3-sphinx \
- python3-sphinx-rtd-theme \
- python3-venv \
- python3-wheel \
- python3-yaml \
- rpm2cpio \
- sed \
- sparse \
- systemtap-sdt-dev \
- tar \
- tesseract-ocr \
- tesseract-ocr-eng \
- texinfo \
- xfslibs-dev \
- zlib1g-dev && \
+ bash \
+ bc \
+ bison \
+ bsdmainutils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ clang \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ g++ \
+ gcc \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libaio-dev \
+ libasan5 \
+ libasound2-dev \
+ libattr1-dev \
+ libbrlapi-dev \
+ libbz2-dev \
+ libc6-dev \
+ libcacard-dev \
+ libcap-ng-dev \
+ libcapstone-dev \
+ libcmocka-dev \
+ libcurl4-gnutls-dev \
+ libdaxctl-dev \
+ libdrm-dev \
+ libepoxy-dev \
+ libfdt-dev \
+ libffi-dev \
+ libfuse3-dev \
+ libgbm-dev \
+ libgcrypt20-dev \
+ libglib2.0-dev \
+ libglusterfs-dev \
+ libgnutls28-dev \
+ libgtk-3-dev \
+ libibumad-dev \
+ libibverbs-dev \
+ libiscsi-dev \
+ libjemalloc-dev \
+ libjpeg-turbo8-dev \
+ libjson-c-dev \
+ liblttng-ust-dev \
+ liblzo2-dev \
+ libncursesw5-dev \
+ libnfs-dev \
+ libnuma-dev \
+ libpam0g-dev \
+ libpcre2-dev \
+ libpixman-1-dev \
+ libpmem-dev \
+ libpng-dev \
+ libpulse-dev \
+ librbd-dev \
+ librdmacm-dev \
+ libsasl2-dev \
+ libsdl2-dev \
+ libsdl2-image-dev \
+ libseccomp-dev \
+ libselinux1-dev \
+ libslirp-dev \
+ libsnappy-dev \
+ libspice-protocol-dev \
+ libspice-server-dev \
+ libssh-dev \
+ libsystemd-dev \
+ libtasn1-6-dev \
+ libubsan1 \
+ libudev-dev \
+ libusb-1.0-0-dev \
+ libusbredirhost-dev \
+ libvdeplug-dev \
+ libvirglrenderer-dev \
+ libvte-2.91-dev \
+ libxen-dev \
+ libzstd-dev \
+ llvm \
+ locales \
+ make \
+ multipath-tools \
+ ncat \
+ nettle-dev \
+ ninja-build \
+ openssh-client \
+ perl-base \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-setuptools \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-wheel \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ sparse \
+ systemtap-sdt-dev \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ texinfo \
+ xfslibs-dev \
+ zlib1g-dev && \
eatmydata apt-get autoremove -y && \
eatmydata apt-get autoclean -y && \
sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
@@ -141,11 +141,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
RUN /usr/bin/pip3 install meson==0.56.0
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
# Apply patch https://reviews.llvm.org/D75820
# This is required for TSan in clang-10 to compile with QEMU.
RUN sed -i 's/^const/static const/g' /usr/lib/llvm-10/lib/clang/10.0.0/include/sanitizer/tsan_interface.h
diff --git a/tests/lcitool/libvirt-ci b/tests/lcitool/libvirt-ci
index e3712b7912..a2633997ff 160000
--- a/tests/lcitool/libvirt-ci
+++ b/tests/lcitool/libvirt-ci
@@ -1 +1 @@
-Subproject commit e3712b79122180fdb3b7a7ea8cbee47ece253f97
+Subproject commit a2633997ffb3830acc96c98c70122885d83bebf4
--
2.37.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v5 2/3] tests/lcitool: Refresh to latest libvirt-ci module
2022-10-28 9:56 ` [PATCH v5 2/3] tests/lcitool: Refresh to latest libvirt-ci module Philippe Mathieu-Daudé
@ 2022-10-28 10:05 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2022-10-28 10:05 UTC (permalink / raw)
To: qemu-devel
Cc: Thomas Huth, Wainer dos Santos Moschetta, Beraldo Leal,
Alex Bennée, Daniel P . Berrange, Richard Henderson
On 28/10/22 11:56, Philippe Mathieu-Daudé wrote:
> From: Alex Bennée <alex.bennee@linaro.org>
>
> We need an updated lcitool for this to deal with the weirdness
> of a 32bit nsis tool for both 32 and 64 bit builds. As a result
s/nsis/NSIS/
> there are some minor whitespace and re-order changes in a bunch
> of the docker files.
Please amend:
All Dockerfile manifests have been automatically re-generated using
'make lcitool-refresh'.
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Acked-by: Richard Henderson <richard.henderson@linaro.org>
> Message-Id: <20220929114231.583801-10-alex.bennee@linaro.org>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> ---
> tests/docker/dockerfiles/alpine.docker | 2 +-
> tests/docker/dockerfiles/centos8.docker | 2 +-
> .../dockerfiles/debian-amd64-cross.docker | 234 ++++++++---------
> tests/docker/dockerfiles/debian-amd64.docker | 236 +++++++++---------
> .../dockerfiles/debian-arm64-cross.docker | 232 ++++++++---------
> .../dockerfiles/debian-armel-cross.docker | 230 ++++++++---------
> .../dockerfiles/debian-armhf-cross.docker | 232 ++++++++---------
> .../dockerfiles/debian-mips64el-cross.docker | 226 ++++++++---------
> .../dockerfiles/debian-mipsel-cross.docker | 226 ++++++++---------
> .../dockerfiles/debian-ppc64el-cross.docker | 230 ++++++++---------
> .../dockerfiles/debian-s390x-cross.docker | 228 ++++++++---------
> tests/docker/dockerfiles/fedora.docker | 230 ++++++++---------
> tests/docker/dockerfiles/opensuse-leap.docker | 2 +-
> tests/docker/dockerfiles/ubuntu2004.docker | 234 ++++++++---------
> tests/lcitool/libvirt-ci | 2 +-
> 15 files changed, 1273 insertions(+), 1273 deletions(-)
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v5 3/3] tests/docker: update fedora-win[32|64]-cross with lcitool
2022-10-28 9:56 [PATCH v5 0/3] tests/docker: update fedora-win[32|64]-cross with lcitool Philippe Mathieu-Daudé
2022-10-28 9:56 ` [PATCH v5 1/3] tests/lcitool: Rename non-Debian specific helper Philippe Mathieu-Daudé
2022-10-28 9:56 ` [PATCH v5 2/3] tests/lcitool: Refresh to latest libvirt-ci module Philippe Mathieu-Daudé
@ 2022-10-28 9:56 ` Philippe Mathieu-Daudé
2022-10-28 10:00 ` [PATCH v5 0/3] " Philippe Mathieu-Daudé
3 siblings, 0 replies; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2022-10-28 9:56 UTC (permalink / raw)
To: qemu-devel
Cc: Thomas Huth, Wainer dos Santos Moschetta, Beraldo Leal,
Philippe Mathieu-Daudé, Alex Bennée,
Daniel P . Berrange, Richard Henderson
From: Alex Bennée <alex.bennee@linaro.org>
Convert another two dockerfiles to lcitool and update.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-10-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
.../dockerfiles/fedora-win32-cross.docker | 139 ++++++++++++------
.../dockerfiles/fedora-win64-cross.docker | 138 ++++++++++++-----
tests/lcitool/refresh | 10 ++
3 files changed, 207 insertions(+), 80 deletions(-)
diff --git a/tests/docker/dockerfiles/fedora-win32-cross.docker b/tests/docker/dockerfiles/fedora-win32-cross.docker
index aca37aabc4..75383ba185 100644
--- a/tests/docker/dockerfiles/fedora-win32-cross.docker
+++ b/tests/docker/dockerfiles/fedora-win32-cross.docker
@@ -1,46 +1,103 @@
+# THIS FILE WAS AUTO-GENERATED
+#
+# $ lcitool dockerfile --layers all --cross mingw32 fedora-35 qemu
+#
+# https://gitlab.com/libvirt/libvirt-ci
+
FROM registry.fedoraproject.org/fedora:35
-# Please keep this list sorted alphabetically
-ENV PACKAGES \
- bc \
- bison \
- bzip2 \
- ccache \
- diffutils \
- findutils \
- flex \
- gcc \
- gettext \
- git \
- glib2-devel \
- hostname \
- make \
- meson \
- mingw32-bzip2 \
- mingw32-curl \
- mingw32-glib2 \
- mingw32-gmp \
- mingw32-gnutls \
- mingw32-gtk3 \
- mingw32-libffi \
- mingw32-libjpeg-turbo \
- mingw32-libpng \
- mingw32-libtasn1 \
- mingw32-libusbx \
- mingw32-nettle \
- mingw32-nsis \
- mingw32-pixman \
- mingw32-pkg-config \
- mingw32-SDL2 \
- msitools \
- perl \
- python3 \
- python3-PyYAML \
- tar \
- which
+RUN dnf install -y nosync && \
+ echo -e '#!/bin/sh\n\
+if test -d /usr/lib64\n\
+then\n\
+ export LD_PRELOAD=/usr/lib64/nosync/nosync.so\n\
+else\n\
+ export LD_PRELOAD=/usr/lib/nosync/nosync.so\n\
+fi\n\
+exec "$@"' > /usr/bin/nosync && \
+ chmod +x /usr/bin/nosync && \
+ nosync dnf update -y && \
+ nosync dnf install -y \
+ bash \
+ bc \
+ bison \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ ctags \
+ dbus-daemon \
+ diffutils \
+ findutils \
+ flex \
+ gcovr \
+ genisoimage \
+ git \
+ glib2-devel \
+ glibc-langpack-en \
+ hostname \
+ llvm \
+ make \
+ meson \
+ ninja-build \
+ nmap-ncat \
+ openssh-clients \
+ pcre-static \
+ perl-base \
+ python3 \
+ python3-PyYAML \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx_rtd_theme \
+ rpm \
+ sed \
+ sparse \
+ spice-protocol \
+ tar \
+ tesseract \
+ tesseract-langpack-eng \
+ texinfo \
+ util-linux \
+ which && \
+ nosync dnf autoremove -y && \
+ nosync dnf clean all -y
-RUN dnf install -y $PACKAGES
-RUN rpm -q $PACKAGES | sort > /packages.txt
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
+ENV LANG "en_US.UTF-8"
+ENV MAKE "/usr/bin/make"
+ENV NINJA "/usr/bin/ninja"
+ENV PYTHON "/usr/bin/python3"
-# Specify the cross prefix for this image (see tests/docker/common.rc)
+RUN nosync dnf install -y \
+ mingw32-SDL2 \
+ mingw32-SDL2_image \
+ mingw32-bzip2 \
+ mingw32-curl \
+ mingw32-gcc \
+ mingw32-gcc-c++ \
+ mingw32-gettext \
+ mingw32-glib2 \
+ mingw32-gnutls \
+ mingw32-gtk3 \
+ mingw32-libgcrypt \
+ mingw32-libjpeg-turbo \
+ mingw32-libpng \
+ mingw32-libtasn1 \
+ mingw32-nettle \
+ mingw32-nsis \
+ mingw32-pixman \
+ mingw32-pkg-config && \
+ nosync dnf clean all -y && \
+ rpm -qa | sort > /packages.txt && \
+ mkdir -p /usr/libexec/ccache-wrappers && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-w64-mingw32-c++ && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-w64-mingw32-cc && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-w64-mingw32-g++ && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-w64-mingw32-gcc
+
+ENV ABI "i686-w64-mingw32"
+ENV MESON_OPTS "--cross-file=/usr/share/mingw/toolchain-mingw32.meson"
ENV QEMU_CONFIGURE_OPTS --cross-prefix=i686-w64-mingw32-
+ENV DEF_TARGET_LIST i386-softmmu
diff --git a/tests/docker/dockerfiles/fedora-win64-cross.docker b/tests/docker/dockerfiles/fedora-win64-cross.docker
index 3642766479..98c03dc13b 100644
--- a/tests/docker/dockerfiles/fedora-win64-cross.docker
+++ b/tests/docker/dockerfiles/fedora-win64-cross.docker
@@ -1,43 +1,103 @@
+# THIS FILE WAS AUTO-GENERATED
+#
+# $ lcitool dockerfile --layers all --cross mingw64 fedora-35 qemu
+#
+# https://gitlab.com/libvirt/libvirt-ci
+
FROM registry.fedoraproject.org/fedora:35
-# Please keep this list sorted alphabetically
-ENV PACKAGES \
- bc \
- bison \
- bzip2 \
- ccache \
- diffutils \
- findutils \
- flex \
- gcc \
- gettext \
- git \
- glib2-devel \
- hostname \
- make \
- meson \
- mingw32-nsis \
- mingw64-bzip2 \
- mingw64-curl \
- mingw64-glib2 \
- mingw64-gmp \
- mingw64-gtk3 \
- mingw64-libffi \
- mingw64-libjpeg-turbo \
- mingw64-libpng \
- mingw64-libtasn1 \
- mingw64-libusbx \
- mingw64-pixman \
- mingw64-pkg-config \
- msitools \
- perl \
- python3 \
- python3-PyYAML \
- tar \
- which
+RUN dnf install -y nosync && \
+ echo -e '#!/bin/sh\n\
+if test -d /usr/lib64\n\
+then\n\
+ export LD_PRELOAD=/usr/lib64/nosync/nosync.so\n\
+else\n\
+ export LD_PRELOAD=/usr/lib/nosync/nosync.so\n\
+fi\n\
+exec "$@"' > /usr/bin/nosync && \
+ chmod +x /usr/bin/nosync && \
+ nosync dnf update -y && \
+ nosync dnf install -y \
+ bash \
+ bc \
+ bison \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ ctags \
+ dbus-daemon \
+ diffutils \
+ findutils \
+ flex \
+ gcovr \
+ genisoimage \
+ git \
+ glib2-devel \
+ glibc-langpack-en \
+ hostname \
+ llvm \
+ make \
+ meson \
+ ninja-build \
+ nmap-ncat \
+ openssh-clients \
+ pcre-static \
+ perl-base \
+ python3 \
+ python3-PyYAML \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx_rtd_theme \
+ rpm \
+ sed \
+ sparse \
+ spice-protocol \
+ tar \
+ tesseract \
+ tesseract-langpack-eng \
+ texinfo \
+ util-linux \
+ which && \
+ nosync dnf autoremove -y && \
+ nosync dnf clean all -y
-RUN dnf install -y $PACKAGES
-RUN rpm -q $PACKAGES | sort > /packages.txt
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
+ENV LANG "en_US.UTF-8"
+ENV MAKE "/usr/bin/make"
+ENV NINJA "/usr/bin/ninja"
+ENV PYTHON "/usr/bin/python3"
-# Specify the cross prefix for this image (see tests/docker/common.rc)
-ENV QEMU_CONFIGURE_OPTS --cross-prefix=x86_64-w64-mingw32- --disable-capstone
+RUN nosync dnf install -y \
+ mingw32-nsis \
+ mingw64-SDL2 \
+ mingw64-SDL2_image \
+ mingw64-bzip2 \
+ mingw64-curl \
+ mingw64-gcc \
+ mingw64-gcc-c++ \
+ mingw64-gettext \
+ mingw64-glib2 \
+ mingw64-gnutls \
+ mingw64-gtk3 \
+ mingw64-libgcrypt \
+ mingw64-libjpeg-turbo \
+ mingw64-libpng \
+ mingw64-libtasn1 \
+ mingw64-nettle \
+ mingw64-pixman \
+ mingw64-pkg-config && \
+ nosync dnf clean all -y && \
+ rpm -qa | sort > /packages.txt && \
+ mkdir -p /usr/libexec/ccache-wrappers && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/x86_64-w64-mingw32-c++ && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/x86_64-w64-mingw32-cc && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/x86_64-w64-mingw32-g++ && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/x86_64-w64-mingw32-gcc
+
+ENV ABI "x86_64-w64-mingw32"
+ENV MESON_OPTS "--cross-file=/usr/share/mingw/toolchain-mingw64.meson"
+ENV QEMU_CONFIGURE_OPTS --cross-prefix=x86_64-w64-mingw32-
+ENV DEF_TARGET_LIST x86_64-softmmu
diff --git a/tests/lcitool/refresh b/tests/lcitool/refresh
index a6a7c23c1d..ce0b24c0b1 100755
--- a/tests/lcitool/refresh
+++ b/tests/lcitool/refresh
@@ -161,6 +161,16 @@ try:
trailer=cross_build("s390x-linux-gnu-",
"s390x-softmmu,s390x-linux-user"))
+ generate_dockerfile("fedora-win32-cross", "fedora-35",
+ cross="mingw32",
+ trailer=cross_build("i686-w64-mingw32-",
+ "i386-softmmu"))
+
+ generate_dockerfile("fedora-win64-cross", "fedora-35",
+ cross="mingw64",
+ trailer=cross_build("x86_64-w64-mingw32-",
+ "x86_64-softmmu"))
+
#
# Cirrus packages lists for GitLab
#
--
2.37.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v5 0/3] tests/docker: update fedora-win[32|64]-cross with lcitool
2022-10-28 9:56 [PATCH v5 0/3] tests/docker: update fedora-win[32|64]-cross with lcitool Philippe Mathieu-Daudé
` (2 preceding siblings ...)
2022-10-28 9:56 ` [PATCH v5 3/3] tests/docker: update fedora-win[32|64]-cross with lcitool Philippe Mathieu-Daudé
@ 2022-10-28 10:00 ` Philippe Mathieu-Daudé
3 siblings, 0 replies; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2022-10-28 10:00 UTC (permalink / raw)
To: qemu-devel
Cc: Thomas Huth, Wainer dos Santos Moschetta, Beraldo Leal,
Alex Bennée, Daniel P . Berrange
On 28/10/22 11:56, Philippe Mathieu-Daudé wrote:
> Hi Alex, in order to review carefully this patch:
> https://lore.kernel.org/qemu-devel/20221027183637.2772968-2-alex.bennee@linaro.org/
> I split it in 3 to convert in trivial patches to review.
> (I kept your S-o-b tag).
>
> Please consider as a replacement for your testing/next PR.
>
> Regards,
>
> Phil.
>
> Alex Bennée (3):
> tests/lcitool: Rename non-Debian specific helper
> tests/lcitool: Refresh to latest libvirt-ci module
> tests/docker: update fedora-win[32|64]-cross with lcitool
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
^ permalink raw reply [flat|nested] 6+ messages in thread