From: Daniel Henrique Barboza <danielhb413@gmail.com>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, stefanha@redhat.com,
"Bernhard Beschow" <shentey@gmail.com>,
"Bin Meng" <bmeng.cn@gmail.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Daniel Henrique Barboza" <danielhb413@gmail.com>
Subject: [PULL 59/62] hw/block/pflash_cfi0{1, 2}: Error out if device length isn't a power of two
Date: Fri, 28 Oct 2022 13:39:48 -0300 [thread overview]
Message-ID: <20221028163951.810456-60-danielhb413@gmail.com> (raw)
In-Reply-To: <20221028163951.810456-1-danielhb413@gmail.com>
From: Bernhard Beschow <shentey@gmail.com>
According to the JEDEC standard the device length is communicated to an
OS as an exponent (power of two).
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221018210146.193159-3-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
hw/block/pflash_cfi01.c | 8 ++++++--
hw/block/pflash_cfi02.c | 5 +++++
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
index 0cbc2fb4cb..9c235bf66e 100644
--- a/hw/block/pflash_cfi01.c
+++ b/hw/block/pflash_cfi01.c
@@ -690,7 +690,7 @@ static const MemoryRegionOps pflash_cfi01_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
-static void pflash_cfi01_fill_cfi_table(PFlashCFI01 *pfl)
+static void pflash_cfi01_fill_cfi_table(PFlashCFI01 *pfl, Error **errp)
{
uint64_t blocks_per_device, sector_len_per_device, device_len;
int num_devices;
@@ -708,6 +708,10 @@ static void pflash_cfi01_fill_cfi_table(PFlashCFI01 *pfl)
sector_len_per_device = pfl->sector_len / num_devices;
}
device_len = sector_len_per_device * blocks_per_device;
+ if (!is_power_of_2(device_len)) {
+ error_setg(errp, "Device size must be a power of two.");
+ return;
+ }
/* Hardcoded CFI table */
/* Standard "QRY" string */
@@ -865,7 +869,7 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
*/
pfl->cmd = 0x00;
pfl->status = 0x80; /* WSM ready */
- pflash_cfi01_fill_cfi_table(pfl);
+ pflash_cfi01_fill_cfi_table(pfl, errp);
}
static void pflash_cfi01_system_reset(DeviceState *dev)
diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c
index 2a99b286b0..ff2fe154c1 100644
--- a/hw/block/pflash_cfi02.c
+++ b/hw/block/pflash_cfi02.c
@@ -880,6 +880,11 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
return;
}
+ if (!is_power_of_2(pfl->chip_len)) {
+ error_setg(errp, "Device size must be a power of two.");
+ return;
+ }
+
memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl),
&pflash_cfi02_ops, pfl, pfl->name,
pfl->chip_len, errp);
--
2.37.3
next prev parent reply other threads:[~2022-10-28 16:45 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-28 16:38 [PULL 00/62] ppc queue Daniel Henrique Barboza
2022-10-28 16:38 ` [PULL 01/62] target/ppc: fix msgclr/msgsnd insns flags Daniel Henrique Barboza
2022-10-28 16:38 ` [PULL 02/62] target/ppc: fix msgsync " Daniel Henrique Barboza
2022-10-28 16:38 ` [PULL 03/62] target/ppc: fix REQUIRE_HV macro definition Daniel Henrique Barboza
2022-10-28 16:38 ` [PULL 04/62] target/ppc: move msgclr/msgsnd to decodetree Daniel Henrique Barboza
2022-10-28 16:38 ` [PULL 05/62] target/ppc: move msgclrp/msgsndp " Daniel Henrique Barboza
2022-10-28 16:38 ` [PULL 06/62] target/ppc: move msgsync " Daniel Henrique Barboza
2022-10-28 16:38 ` [PULL 07/62] target/ppc: Moved VMLADDUHM to decodetree and use gvec Daniel Henrique Barboza
2022-10-28 16:38 ` [PULL 08/62] target/ppc: Move VMH[R]ADDSHS instruction to decodetree Daniel Henrique Barboza
2022-10-28 16:38 ` [PULL 09/62] target/ppc: Move V(ADD|SUB)CUW to decodetree and use gvec Daniel Henrique Barboza
2022-10-28 16:38 ` [PULL 10/62] target/ppc: Move VNEG[WD] to decodtree " Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 11/62] target/ppc: Move VPRTYB[WDQ] to decodetree " Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 12/62] target/ppc: Move VAVG[SU][BHW] " Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 13/62] target/ppc: Move VABSDU[BHW] " Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 14/62] target/ppc: Use gvec to decode XV[N]ABS[DS]P/XVNEG[DS]P Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 15/62] target/ppc: Use gvec to decode XVCPSGN[SD]P Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 16/62] target/ppc: Moved XVTSTDC[DS]P to decodetree Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 17/62] target/ppc: Moved XSTSTDC[QDS]P " Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 18/62] target/ppc: Use gvec to decode XVTSTDC[DS]P Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 19/62] target/ppc: define PPC_INTERRUPT_* values directly Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 20/62] target/ppc: always use ppc_set_irq to set env->pending_interrupts Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 21/62] target/ppc: split interrupt masking and delivery from ppc_hw_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 22/62] target/ppc: prepare to split interrupt masking and delivery by excp_model Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 23/62] target/ppc: create an interrupt masking method for POWER9/POWER10 Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 24/62] target/ppc: remove unused interrupts from p9_next_unmasked_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 25/62] target/ppc: create an interrupt deliver method for POWER9/POWER10 Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 26/62] target/ppc: remove unused interrupts from p9_deliver_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 27/62] target/ppc: remove generic architecture checks " Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 28/62] target/ppc: move power-saving interrupt masking out of cpu_has_work_POWER9 Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 29/62] target/ppc: add power-saving interrupt masking logic to p9_next_unmasked_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 30/62] target/ppc: create an interrupt masking method for POWER8 Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 31/62] target/ppc: remove unused interrupts from p8_next_unmasked_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 32/62] target/ppc: create an interrupt deliver method for POWER8 Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 33/62] target/ppc: remove unused interrupts from p8_deliver_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 34/62] target/ppc: remove generic architecture checks " Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 35/62] target/ppc: move power-saving interrupt masking out of cpu_has_work_POWER8 Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 36/62] target/ppc: add power-saving interrupt masking logic to p8_next_unmasked_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 37/62] target/ppc: create an interrupt masking method for POWER7 Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 38/62] target/ppc: remove unused interrupts from p7_next_unmasked_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 39/62] target/ppc: create an interrupt deliver method for POWER7 Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 40/62] target/ppc: remove unused interrupts from p7_deliver_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 41/62] target/ppc: remove generic architecture checks " Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 42/62] target/ppc: move power-saving interrupt masking out of cpu_has_work_POWER7 Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 43/62] target/ppc: add power-saving interrupt masking logic to p7_next_unmasked_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 44/62] target/ppc: remove ppc_store_lpcr from CONFIG_USER_ONLY builds Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 45/62] target/ppc: introduce ppc_maybe_interrupt Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 46/62] target/ppc: unify cpu->has_work based on cs->interrupt_request Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 47/62] target/ppc: move the p*_interrupt_powersave methods to excp_helper.c Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 48/62] ppc440_uc.c: Move DDR2 SDRAM controller model to ppc4xx_sdram.c Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 49/62] ppc4xx_devs.c: Move DDR " Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 50/62] ppc4xx_sdram: Move ppc4xx_sdram_banks() " Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 51/62] ppc4xx_sdram: Use hwaddr for memory bank size Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 52/62] ppc4xx_sdram: Rename local state variable for brevity Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 53/62] ppc4xx_sdram: Generalise bank setup Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 54/62] ppc4xx_sdram: Convert DDR SDRAM controller to new bank handling Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 55/62] ppc4xx_sdram: Add errp parameter to ppc4xx_sdram_banks() Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 56/62] target/ppc: Add new PMC HFLAGS Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 57/62] target/ppc: Increment PMC5 with inline insns Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 58/62] docs/system/ppc/ppce500: Use qemu-system-ppc64 across the board(s) Daniel Henrique Barboza
2022-10-28 16:39 ` Daniel Henrique Barboza [this message]
2022-11-01 22:23 ` [PULL 59/62] hw/block/pflash_cfi0{1, 2}: Error out if device length isn't a power of two Stefan Hajnoczi
2022-11-01 22:49 ` Philippe Mathieu-Daudé
2022-11-02 19:49 ` Daniel Henrique Barboza
2022-11-08 17:36 ` Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 60/62] hw/sd/sdhci-internal: Unexport ESDHC defines Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 61/62] hw/sd/sdhci: Rename ESDHC_* defines to USDHC_* Daniel Henrique Barboza
2022-10-28 16:39 ` [PULL 62/62] hw/ppc/e500: Implement pflash handling Daniel Henrique Barboza
2022-10-28 20:25 ` [PULL 00/62] ppc queue Daniel Henrique Barboza
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221028163951.810456-60-danielhb413@gmail.com \
--to=danielhb413@gmail.com \
--cc=bmeng.cn@gmail.com \
--cc=f4bug@amsat.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=shentey@gmail.com \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).