From: Thomas Huth <thuth@redhat.com>
To: Stefan Hajnoczi <stefanha@redhat.com>, qemu-devel@nongnu.org
Cc: "Akihiko Odaki" <akihiko.odaki@daynix.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PULL 03/12] tests/qtest/e1000e-test: Use e1000_regs.h
Date: Sun, 6 Nov 2022 16:31:47 +0100 [thread overview]
Message-ID: <20221106153156.620150-4-thuth@redhat.com> (raw)
In-Reply-To: <20221106153156.620150-1-thuth@redhat.com>
From: Akihiko Odaki <akihiko.odaki@daynix.com>
The register definitions in tests/qtest/e1000e-test.c had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103095416.110162-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/qtest/e1000e-test.c | 66 ++++++---------------------------------
1 file changed, 10 insertions(+), 56 deletions(-)
diff --git a/tests/qtest/e1000e-test.c b/tests/qtest/e1000e-test.c
index 4cdd8238f2..08adc5226d 100644
--- a/tests/qtest/e1000e-test.c
+++ b/tests/qtest/e1000e-test.c
@@ -33,34 +33,11 @@
#include "qemu/bitops.h"
#include "libqos/libqos-malloc.h"
#include "libqos/e1000e.h"
+#include "hw/net/e1000_regs.h"
static void e1000e_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *alloc)
{
- struct {
- uint64_t buffer_addr;
- union {
- uint32_t data;
- struct {
- uint16_t length;
- uint8_t cso;
- uint8_t cmd;
- } flags;
- } lower;
- union {
- uint32_t data;
- struct {
- uint8_t status;
- uint8_t css;
- uint16_t special;
- } fields;
- } upper;
- } descr;
-
- static const uint32_t dtyp_data = BIT(20);
- static const uint32_t dtyp_ext = BIT(29);
- static const uint32_t dcmd_rs = BIT(27);
- static const uint32_t dcmd_eop = BIT(24);
- static const uint32_t dsta_dd = BIT(0);
+ struct e1000_tx_desc descr;
static const int data_len = 64;
char buffer[64];
int ret;
@@ -73,10 +50,10 @@ static void e1000e_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *a
/* Prepare TX descriptor */
memset(&descr, 0, sizeof(descr));
descr.buffer_addr = cpu_to_le64(data);
- descr.lower.data = cpu_to_le32(dcmd_rs |
- dcmd_eop |
- dtyp_ext |
- dtyp_data |
+ descr.lower.data = cpu_to_le32(E1000_TXD_CMD_RS |
+ E1000_TXD_CMD_EOP |
+ E1000_TXD_CMD_DEXT |
+ E1000_TXD_DTYP_D |
data_len);
/* Put descriptor to the ring */
@@ -86,7 +63,8 @@ static void e1000e_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *a
e1000e_wait_isr(d, E1000E_TX0_MSG_ID);
/* Check DD bit */
- g_assert_cmphex(le32_to_cpu(descr.upper.data) & dsta_dd, ==, dsta_dd);
+ g_assert_cmphex(le32_to_cpu(descr.upper.data) & E1000_TXD_STAT_DD, ==,
+ E1000_TXD_STAT_DD);
/* Check data sent to the backend */
ret = recv(test_sockets[0], &recv_len, sizeof(recv_len), 0);
@@ -101,31 +79,7 @@ static void e1000e_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *a
static void e1000e_receive_verify(QE1000E *d, int *test_sockets, QGuestAllocator *alloc)
{
- union {
- struct {
- uint64_t buffer_addr;
- uint64_t reserved;
- } read;
- struct {
- struct {
- uint32_t mrq;
- union {
- uint32_t rss;
- struct {
- uint16_t ip_id;
- uint16_t csum;
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- uint32_t status_error;
- uint16_t length;
- uint16_t vlan;
- } upper;
- } wb;
- } descr;
-
- static const uint32_t esta_dd = BIT(0);
+ union e1000_rx_desc_extended descr;
char test[] = "TEST";
int len = htonl(sizeof(test));
@@ -162,7 +116,7 @@ static void e1000e_receive_verify(QE1000E *d, int *test_sockets, QGuestAllocator
/* Check DD bit */
g_assert_cmphex(le32_to_cpu(descr.wb.upper.status_error) &
- esta_dd, ==, esta_dd);
+ E1000_RXD_STAT_DD, ==, E1000_RXD_STAT_DD);
/* Check data sent to the backend */
memread(data, buffer, sizeof(buffer));
--
2.31.1
next prev parent reply other threads:[~2022-11-06 15:33 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-06 15:31 [PULL 00/12] qtest and s390x patches Thomas Huth
2022-11-06 15:31 ` [PULL 01/12] tests/qtest/libqos/e1000e: Refer common PCI ID definitions Thomas Huth
2022-11-06 15:31 ` [PULL 02/12] tests/qtest/libqos/e1000e: Set E1000_CTRL_SLU Thomas Huth
2022-11-06 15:31 ` Thomas Huth [this message]
2022-11-06 15:31 ` [PULL 04/12] tests/qtest/libqos/e1000e: Use E1000_STATUS_ASDV_1000 Thomas Huth
2022-11-06 15:31 ` [PULL 05/12] tests/qtest/libqos/e1000e: Use IVAR shift definitions Thomas Huth
2022-11-06 15:31 ` [PULL 06/12] tests/qtest: Fix two format strings Thomas Huth
2022-11-06 15:31 ` [PULL 07/12] tests/qtest: migration-test: Enable TLS PSK tests for win32 Thomas Huth
2022-11-06 15:31 ` [PULL 08/12] gitlab-ci: increase clang-user timeout Thomas Huth
2022-11-06 15:31 ` [PULL 09/12] s390x/css: revert SCSW ctrl/flag bits on error Thomas Huth
2022-11-06 15:31 ` [PULL 10/12] s390x/pci: RPCIT second pass when mappings exhausted Thomas Huth
2022-11-06 15:31 ` [PULL 11/12] s390x: Register TYPE_S390_CCW_MACHINE properties as class properties Thomas Huth
2022-11-06 15:31 ` [PULL 12/12] s390x/cpu topology: add max_threads machine class attribute Thomas Huth
2022-11-07 20:11 ` [PULL 00/12] qtest and s390x patches Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221106153156.620150-4-thuth@redhat.com \
--to=thuth@redhat.com \
--cc=akihiko.odaki@daynix.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).