From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Aurelien Jarno" <aurelien@aurel32.net>,
"Aleksandar Rikalo" <aleksandar.rikalo@syrmia.com>,
"Jiaxun Yang" <jiaxun.yang@flygoat.com>,
"Richard Henderson" <richard.henderson@linaro.org>
Subject: [PULL 11/14] disas/nanomips: Merge insn{1,2,3} into words[3]
Date: Tue, 8 Nov 2022 00:58:19 +0100 [thread overview]
Message-ID: <20221107235822.71458-12-philmd@linaro.org> (raw)
In-Reply-To: <20221107235822.71458-1-philmd@linaro.org>
From: Richard Henderson <richard.henderson@linaro.org>
Since Disassemble wants the data in this format, collect
it that way. This allows using a loop to print the bytes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221106212852.152384-3-richard.henderson@linaro.org>
---
disas/nanomips.c | 44 +++++++++++++++++++++-----------------------
1 file changed, 21 insertions(+), 23 deletions(-)
diff --git a/disas/nanomips.c b/disas/nanomips.c
index 83a39a878c..e462256760 100644
--- a/disas/nanomips.c
+++ b/disas/nanomips.c
@@ -21907,26 +21907,22 @@ static const Pool MAJOR[2] = {
0x0 }, /* P16 */
};
-static bool nanomips_dis(char **buf, Dis_info *info,
- unsigned short one,
- unsigned short two,
- unsigned short three)
+static bool nanomips_dis(const uint16_t *data, char **buf, Dis_info *info)
{
- uint16 bits[3] = {one, two, three};
TABLE_ENTRY_TYPE type;
/* Handle runtime errors. */
if (unlikely(sigsetjmp(info->buf, 0) != 0)) {
return false;
}
- return Disassemble(bits, buf, &type, MAJOR, ARRAY_SIZE(MAJOR), info) >= 0;
+ return Disassemble(data, buf, &type, MAJOR, ARRAY_SIZE(MAJOR), info) >= 0;
}
int print_insn_nanomips(bfd_vma memaddr, struct disassemble_info *info)
{
int status, length;
bfd_byte buffer[2];
- uint16_t insn1 = 0, insn2 = 0, insn3 = 0;
+ uint16_t words[3] = { };
g_autofree char *buf = NULL;
info->bytes_per_chunk = 2;
@@ -21950,15 +21946,14 @@ int print_insn_nanomips(bfd_vma memaddr, struct disassemble_info *info)
}
if (info->endian == BFD_ENDIAN_BIG) {
- insn1 = bfd_getb16(buffer);
+ words[0] = bfd_getb16(buffer);
} else {
- insn1 = bfd_getl16(buffer);
+ words[0] = bfd_getl16(buffer);
}
length = 2;
- (*info->fprintf_func)(info->stream, "%04x ", insn1);
/* Handle 32-bit opcodes. */
- if ((insn1 & 0x1000) == 0) {
+ if ((words[0] & 0x1000) == 0) {
status = (*info->read_memory_func)(memaddr + 2, buffer, 2, info);
if (status != 0) {
(*info->memory_error_func)(status, memaddr + 2, info);
@@ -21966,17 +21961,15 @@ int print_insn_nanomips(bfd_vma memaddr, struct disassemble_info *info)
}
if (info->endian == BFD_ENDIAN_BIG) {
- insn2 = bfd_getb16(buffer);
+ words[1] = bfd_getb16(buffer);
} else {
- insn2 = bfd_getl16(buffer);
+ words[1] = bfd_getl16(buffer);
}
length = 4;
- (*info->fprintf_func)(info->stream, "%04x ", insn2);
- } else {
- (*info->fprintf_func)(info->stream, " ");
}
+
/* Handle 48-bit opcodes. */
- if ((insn1 >> 10) == 0x18) {
+ if ((words[0] >> 10) == 0x18) {
status = (*info->read_memory_func)(memaddr + 4, buffer, 2, info);
if (status != 0) {
(*info->memory_error_func)(status, memaddr + 4, info);
@@ -21984,17 +21977,22 @@ int print_insn_nanomips(bfd_vma memaddr, struct disassemble_info *info)
}
if (info->endian == BFD_ENDIAN_BIG) {
- insn3 = bfd_getb16(buffer);
+ words[2] = bfd_getb16(buffer);
} else {
- insn3 = bfd_getl16(buffer);
+ words[2] = bfd_getl16(buffer);
}
length = 6;
- (*info->fprintf_func)(info->stream, "%04x ", insn3);
- } else {
- (*info->fprintf_func)(info->stream, " ");
}
- if (nanomips_dis(&buf, &disassm_info, insn1, insn2, insn3)) {
+ for (int i = 0; i < ARRAY_SIZE(words); i++) {
+ if (i * 2 < length) {
+ (*info->fprintf_func)(info->stream, "%04x ", words[i]);
+ } else {
+ (*info->fprintf_func)(info->stream, " ");
+ }
+ }
+
+ if (nanomips_dis(words, &buf, &disassm_info)) {
(*info->fprintf_func) (info->stream, "%s", buf);
}
--
2.38.1
next prev parent reply other threads:[~2022-11-07 23:59 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-07 23:58 [PULL 00/14] MIPS patches for 2022-11-08 Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 01/14] target/mips: Set CP0St_{KX, SX, UX} for Loongson-2F Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 02/14] target/mips: Cast offset field of Octeon BBIT to int16_t Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 03/14] target/mips: Enable LBX/LWX/* instructions for Octeon Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 04/14] target/mips: Disable DSP ASE for Octeon68XX Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 05/14] target/mips: Don't check COP1X for 64 bit FP mode Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 06/14] disas/nanomips: Fix invalid PRId64 format calling img_format() Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 07/14] disas/nanomips: Fix invalid PRIx64 " Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 08/14] disas/nanomips: Use G_GNUC_PRINTF to avoid invalid string formats Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 09/14] disas/nanomips: Remove headers already included by "qemu/osdep.h" Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 10/14] disas/nanomips: Move setjmp into nanomips_dis Philippe Mathieu-Daudé
2022-11-07 23:58 ` Philippe Mathieu-Daudé [this message]
2022-11-07 23:58 ` [PULL 12/14] disas/nanomips: Split out read_u16 Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 13/14] disas/nanomips: Tidy read for 48-bit opcodes Philippe Mathieu-Daudé
2022-11-07 23:58 ` [PULL 14/14] MAINTAINERS: Inherit from nanoMIPS Philippe Mathieu-Daudé
2022-11-08 18:08 ` [PULL 00/14] MIPS patches for 2022-11-08 Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221107235822.71458-12-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=aleksandar.rikalo@syrmia.com \
--cc=aurelien@aurel32.net \
--cc=jiaxun.yang@flygoat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).