qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Huth <thuth@redhat.com>
To: Stefan Hajnoczi <stefanha@redhat.com>, qemu-devel@nongnu.org
Cc: Matthew Rosato <mjrosato@linux.ibm.com>,
	Eric Farman <farman@linux.ibm.com>
Subject: [PULL 03/23] s390x/pci: reset ISM passthrough devices on shutdown and system reset
Date: Wed, 14 Dec 2022 11:08:51 +0100	[thread overview]
Message-ID: <20221214100911.165291-4-thuth@redhat.com> (raw)
In-Reply-To: <20221214100911.165291-1-thuth@redhat.com>

From: Matthew Rosato <mjrosato@linux.ibm.com>

ISM device firmware stores unique state information that can
can cause a wholesale unmap of the associated IOMMU (e.g. when
we get a termination signal for QEMU) to trigger firmware errors
because firmware believes we are attempting to invalidate entries
that are still in-use by the guest OS (when in fact that guest is
in the process of being terminated or rebooted).
To alleviate this, register both a shutdown notifier (for unexpected
termination cases e.g. virsh destroy) as well as a reset callback
(for cases like guest OS reboot).  For each of these scenarios, trigger
PCI device reset; this is enough to indicate to firmware that the IOMMU
is no longer in-use by the guest OS, making it safe to invalidate any
associated IOMMU entries.

Fixes: 15d0e7942d3b ("s390x/pci: don't fence interpreted devices without MSI-X")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221209195700.263824-1-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
[thuth: Adjusted the hunk in s390-pci-vfio.c due to different context]
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 include/hw/s390x/s390-pci-bus.h |  5 +++++
 hw/s390x/s390-pci-bus.c         | 28 ++++++++++++++++++++++++++++
 hw/s390x/s390-pci-vfio.c        |  2 ++
 3 files changed, 35 insertions(+)

diff --git a/include/hw/s390x/s390-pci-bus.h b/include/hw/s390x/s390-pci-bus.h
index 1c46e3a269..e0a9f9385b 100644
--- a/include/hw/s390x/s390-pci-bus.h
+++ b/include/hw/s390x/s390-pci-bus.h
@@ -39,6 +39,9 @@
 #define UID_CHECKING_ENABLED 0x01
 #define ZPCI_DTSM 0x40
 
+/* zPCI Function Types */
+#define ZPCI_PFT_ISM 5
+
 OBJECT_DECLARE_SIMPLE_TYPE(S390pciState, S390_PCI_HOST_BRIDGE)
 OBJECT_DECLARE_SIMPLE_TYPE(S390PCIBus, S390_PCI_BUS)
 OBJECT_DECLARE_SIMPLE_TYPE(S390PCIBusDevice, S390_PCI_DEVICE)
@@ -344,6 +347,7 @@ struct S390PCIBusDevice {
     uint16_t noi;
     uint16_t maxstbl;
     uint8_t sum;
+    uint8_t pft;
     S390PCIGroup *pci_group;
     ClpRspQueryPci zpci_fn;
     S390MsixInfo msix;
@@ -352,6 +356,7 @@ struct S390PCIBusDevice {
     MemoryRegion msix_notify_mr;
     IndAddr *summary_ind;
     IndAddr *indicator;
+    Notifier shutdown_notifier;
     bool pci_unplug_request_processed;
     bool unplug_requested;
     bool interp;
diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
index 977e7daa15..02751f3597 100644
--- a/hw/s390x/s390-pci-bus.c
+++ b/hw/s390x/s390-pci-bus.c
@@ -24,6 +24,8 @@
 #include "hw/pci/msi.h"
 #include "qemu/error-report.h"
 #include "qemu/module.h"
+#include "sysemu/reset.h"
+#include "sysemu/runstate.h"
 
 #ifndef DEBUG_S390PCI_BUS
 #define DEBUG_S390PCI_BUS  0
@@ -150,10 +152,30 @@ out:
     psccb->header.response_code = cpu_to_be16(rc);
 }
 
+static void s390_pci_shutdown_notifier(Notifier *n, void *opaque)
+{
+    S390PCIBusDevice *pbdev = container_of(n, S390PCIBusDevice,
+                                           shutdown_notifier);
+
+    pci_device_reset(pbdev->pdev);
+}
+
+static void s390_pci_reset_cb(void *opaque)
+{
+    S390PCIBusDevice *pbdev = opaque;
+
+    pci_device_reset(pbdev->pdev);
+}
+
 static void s390_pci_perform_unplug(S390PCIBusDevice *pbdev)
 {
     HotplugHandler *hotplug_ctrl;
 
+    if (pbdev->pft == ZPCI_PFT_ISM) {
+        notifier_remove(&pbdev->shutdown_notifier);
+        qemu_unregister_reset(s390_pci_reset_cb, pbdev);
+    }
+
     /* Unplug the PCI device */
     if (pbdev->pdev) {
         DeviceState *pdev = DEVICE(pbdev->pdev);
@@ -1111,6 +1133,12 @@ static void s390_pcihost_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
                 pbdev->fh |= FH_SHM_VFIO;
                 pbdev->forwarding_assist = false;
             }
+            /* Register shutdown notifier and reset callback for ISM devices */
+            if (pbdev->pft == ZPCI_PFT_ISM) {
+                pbdev->shutdown_notifier.notify = s390_pci_shutdown_notifier;
+                qemu_register_shutdown_notifier(&pbdev->shutdown_notifier);
+                qemu_register_reset(s390_pci_reset_cb, pbdev);
+            }
         } else {
             pbdev->fh |= FH_SHM_EMUL;
             /* Always intercept emulated devices */
diff --git a/hw/s390x/s390-pci-vfio.c b/hw/s390x/s390-pci-vfio.c
index f7bf36cec8..f51190d466 100644
--- a/hw/s390x/s390-pci-vfio.c
+++ b/hw/s390x/s390-pci-vfio.c
@@ -124,6 +124,8 @@ static void s390_pci_read_base(S390PCIBusDevice *pbdev,
     /* The following values remain 0 until we support other FMB formats */
     pbdev->zpci_fn.fmbl = 0;
     pbdev->zpci_fn.pft = 0;
+    /* Store function type separately for type-specific behavior */
+    pbdev->pft = cap->pft;
 
     /*
      * If appropriate, reduce the size of the supported DMA aperture reported
-- 
2.31.1



  parent reply	other threads:[~2022-12-14 10:19 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-14 10:08 [PULL 00/23] First batch of s390x, qtest, CI and misc patches for 8.0 Thomas Huth
2022-12-14 10:08 ` [PULL 01/23] s390x/pci: coalesce unmap operations Thomas Huth
2022-12-14 10:08 ` [PULL 02/23] s390x/pci: shrink DMA aperture to be bound by vfio DMA limit Thomas Huth
2022-12-14 10:08 ` Thomas Huth [this message]
2022-12-14 10:08 ` [PULL 04/23] target/s390x/tcg/mem_helper: Test the right bits in psw_key_valid() Thomas Huth
2022-12-14 10:08 ` [PULL 05/23] target/s390x: The MVCP and MVCS instructions are not privileged Thomas Huth
2022-12-14 10:08 ` [PULL 06/23] monitor/misc: Remove superfluous include statements Thomas Huth
2022-12-14 10:08 ` [PULL 07/23] scripts/make-release: Add a simple help text for the script Thomas Huth
2022-12-14 10:08 ` [PULL 08/23] scripts/make-release: Only clone single branches to speed up " Thomas Huth
2022-12-14 10:08 ` [PULL 09/23] util/qemu-config: Fix "query-command-line-options" to provide the right values Thomas Huth
2022-12-14 10:08 ` [PULL 10/23] util/oslib-win32: Remove obsolete reference to g_poll code Thomas Huth
2022-12-14 10:08 ` [PULL 11/23] MAINTAINERS: Add documentation files to the corresponding sections Thomas Huth
2022-12-14 10:09 ` [PULL 12/23] hw: Include the VMWare devices only in the x86 targets Thomas Huth
2022-12-14 10:09 ` [PULL 13/23] tests/qtest/libqos/e1000e: Remove "other" interrupts Thomas Huth
2022-12-14 10:09 ` [PULL 14/23] tests/qtest/e1000e-test: De-duplicate constants Thomas Huth
2022-12-14 10:09 ` [PULL 15/23] tests/qtest/libqos/e1000e: Correctly group register accesses Thomas Huth
2022-12-14 10:09 ` [PULL 16/23] .gitlab-ci.d/windows.yml: Unify the prerequisite packages Thomas Huth
2022-12-14 10:09 ` [PULL 17/23] .gitlab-ci.d/windows.yml: Keep 64-bit and 32-bit build scripts consistent Thomas Huth
2022-12-14 10:09 ` [PULL 18/23] .gitlab-ci.d/windows.yml: Exclude qTests from 64-bit CI job for now Thomas Huth
2022-12-14 10:09 ` [PULL 19/23] tests/qtest: Enable qtest build on Windows Thomas Huth
2022-12-14 10:09 ` [PULL 20/23] FreeBSD: Upgrade to 12.4 release Thomas Huth
2022-12-14 10:09 ` [PULL 21/23] gitlab-ci: Check building ppc64 without TCG Thomas Huth
2022-12-14 10:09 ` [PULL 22/23] .gitlab/issue_templates: Move suggestions into comments Thomas Huth
2022-12-14 10:09 ` [PULL 23/23] tests/qtest/vhost-user-blk-test: don't abort all qtests on missing envar Thomas Huth
2022-12-15 13:38 ` [PULL 00/23] First batch of s390x, qtest, CI and misc patches for 8.0 Peter Maydell
2022-12-15 14:14   ` Thomas Huth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221214100911.165291-4-thuth@redhat.com \
    --to=thuth@redhat.com \
    --cc=farman@linux.ibm.com \
    --cc=mjrosato@linux.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).