From: Bernhard Beschow <shentey@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Eduardo Habkost" <eduardo@habkost.net>,
qemu-block@nongnu.org, "Hervé Poussineau" <hpoussin@reactos.org>,
"Ani Sinha" <ani@anisinha.ca>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Jiaxun Yang" <jiaxun.yang@flygoat.com>,
"Aurelien Jarno" <aurelien@aurel32.net>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Igor Mammedov" <imammedo@redhat.com>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"John Snow" <jsnow@redhat.com>,
"Gerd Hoffmann" <kraxel@redhat.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Bernhard Beschow" <shentey@gmail.com>
Subject: [PATCH v5 14/31] hw/isa/piix3: Create ISA PIC in host device
Date: Thu, 5 Jan 2023 15:32:11 +0100 [thread overview]
Message-ID: <20230105143228.244965-15-shentey@gmail.com> (raw)
In-Reply-To: <20230105143228.244965-1-shentey@gmail.com>
Use the newly introduced TYPE_ISA_PIC which allows for wiring
up devices in the southbridge where the virtualization technology used
(KVM, TCG, Xen) is not yet known.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221022150508.26830-16-shentey@gmail.com>
---
include/hw/southbridge/piix.h | 4 ++--
hw/i386/pc_piix.c | 15 +++++++++------
hw/isa/piix3.c | 10 +++++++++-
hw/i386/Kconfig | 1 +
hw/isa/Kconfig | 1 +
5 files changed, 22 insertions(+), 9 deletions(-)
diff --git a/include/hw/southbridge/piix.h b/include/hw/southbridge/piix.h
index 1c291cc954..7178147b75 100644
--- a/include/hw/southbridge/piix.h
+++ b/include/hw/southbridge/piix.h
@@ -15,6 +15,7 @@
#include "hw/pci/pci.h"
#include "qom/object.h"
#include "hw/acpi/piix4.h"
+#include "hw/intc/i8259.h"
#include "hw/rtc/mc146818rtc.h"
#include "hw/usb/hcd-uhci.h"
@@ -50,11 +51,10 @@ struct PIIXState {
#endif
uint64_t pic_levels;
- qemu_irq *pic;
-
/* This member isn't used. Just for save/load compatibility */
int32_t pci_irq_levels_vmstate[PIIX_NUM_PIRQS];
+ ISAPICState pic;
RTCState rtc;
UHCIState uhci;
PIIX4PMState pm;
diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
index eaf252187e..f779251e79 100644
--- a/hw/i386/pc_piix.c
+++ b/hw/i386/pc_piix.c
@@ -219,10 +219,11 @@ static void pc_init1(MachineState *machine,
gsi_state = pc_gsi_create(&x86ms->gsi, pcmc->pci_enabled);
if (pcmc->pci_enabled) {
- PIIX3State *piix3;
+ DeviceState *dev;
PCIDevice *pci_dev;
const char *type = xen_enabled() ? TYPE_PIIX3_XEN_DEVICE
: TYPE_PIIX3_DEVICE;
+ int i;
pci_bus = i440fx_init(pci_type,
i440fx_host,
@@ -247,10 +248,12 @@ static void pc_init1(MachineState *machine,
&error_abort);
pci_realize_and_unref(pci_dev, pci_bus, &error_fatal);
- piix3 = PIIX3_PCI_DEVICE(pci_dev);
- piix3->pic = x86ms->gsi;
- piix3_devfn = piix3->dev.devfn;
- isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix3), "isa.0"));
+ dev = DEVICE(object_resolve_path_component(OBJECT(pci_dev), "pic"));
+ for (i = 0; i < ISA_NUM_IRQS; i++) {
+ qdev_connect_gpio_out(dev, i, x86ms->gsi[i]);
+ }
+ piix3_devfn = pci_dev->devfn;
+ isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(pci_dev), "isa.0"));
rtc_state = ISA_DEVICE(object_resolve_path_component(OBJECT(pci_dev),
"rtc"));
piix4_pm = object_resolve_path_component(OBJECT(pci_dev), "pm");
@@ -259,6 +262,7 @@ static void pc_init1(MachineState *machine,
piix4_pm = NULL;
isa_bus = isa_bus_new(NULL, get_system_memory(), system_io,
&error_abort);
+ isa_bus_irqs(isa_bus, x86ms->gsi);
rtc_state = isa_new(TYPE_MC146818_RTC);
qdev_prop_set_int32(DEVICE(rtc_state), "base_year", 2000);
@@ -267,7 +271,6 @@ static void pc_init1(MachineState *machine,
i8257_dma_init(isa_bus, 0);
pcms->hpet_enabled = false;
}
- isa_bus_irqs(isa_bus, x86ms->gsi);
if (x86ms->pic == ON_OFF_AUTO_ON || x86ms->pic == ON_OFF_AUTO_AUTO) {
pc_i8259_create(isa_bus, gsi_state->i8259_irq);
diff --git a/hw/isa/piix3.c b/hw/isa/piix3.c
index ed7d58bc98..88a6bf28ea 100644
--- a/hw/isa/piix3.c
+++ b/hw/isa/piix3.c
@@ -39,7 +39,7 @@
static void piix3_set_irq_pic(PIIX3State *piix3, int pic_irq)
{
- qemu_set_irq(piix3->pic[pic_irq],
+ qemu_set_irq(piix3->pic.in_irqs[pic_irq],
!!(piix3->pic_levels &
(((1ULL << PIIX_NUM_PIRQS) - 1) <<
(pic_irq * PIIX_NUM_PIRQS))));
@@ -297,6 +297,13 @@ static void pci_piix3_realize(PCIDevice *dev, Error **errp)
return;
}
+ /* PIC */
+ if (!qdev_realize(DEVICE(&d->pic), NULL, errp)) {
+ return;
+ }
+
+ isa_bus_irqs(isa_bus, d->pic.in_irqs);
+
memory_region_init_io(&d->rcr_mem, OBJECT(dev), &rcr_ops, d,
"piix3-reset-control", 1);
memory_region_add_subregion_overlap(pci_address_space_io(dev),
@@ -360,6 +367,7 @@ static void pci_piix3_init(Object *obj)
{
PIIX3State *d = PIIX3_PCI_DEVICE(obj);
+ object_initialize_child(obj, "pic", &d->pic, TYPE_ISA_PIC);
object_initialize_child(obj, "rtc", &d->rtc, TYPE_MC146818_RTC);
}
diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
index d22ac4a4b9..79f5925dbe 100644
--- a/hw/i386/Kconfig
+++ b/hw/i386/Kconfig
@@ -72,6 +72,7 @@ config I440FX
select PC_PCI
select PC_ACPI
select ACPI_SMBUS
+ select I8259
select PCI_I440FX
select PIIX3
select IDE_PIIX
diff --git a/hw/isa/Kconfig b/hw/isa/Kconfig
index 6c154d88c7..694c8840de 100644
--- a/hw/isa/Kconfig
+++ b/hw/isa/Kconfig
@@ -35,6 +35,7 @@ config PIIX3
bool
select ACPI_PIIX4
select I8257
+ select I8259
select ISA_BUS
select MC146818RTC
select USB_UHCI
--
2.39.0
next prev parent reply other threads:[~2023-01-05 14:40 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-05 14:31 [PATCH v5 00/31] Consolidate PIIX south bridges Bernhard Beschow
2023-01-05 14:31 ` [PATCH v5 01/31] hw/mips/malta: Introduce PIIX4_PCI_DEVFN definition Bernhard Beschow
2023-01-05 14:31 ` [PATCH v5 02/31] hw/mips/malta: Set PIIX4 IRQ routes in embedded bootloader Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 03/31] hw/isa/piix4: Correct IRQRC[A:D] reset values Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 04/31] hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 05/31] hw/usb/hcd-uhci: Introduce TYPE_ defines for device models Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 06/31] hw/i386/pc_piix: Associate pci_map_irq_fn as soon as PCI bus is created Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 07/31] hw/i386/pc_piix: Allow for setting properties before realizing PIIX3 south bridge Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 08/31] hw/i386/pc: Create RTC controllers in south bridges Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 09/31] hw/i386/pc: No need for rtc_state to be an out-parameter Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 10/31] hw/isa/piix3: Create USB controller in host device Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 11/31] hw/isa/piix3: Create power management " Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 12/31] hw/intc/i8259: Make using the isa_pic singleton more type-safe Bernhard Beschow
2023-01-07 23:28 ` Mark Cave-Ayland
2023-01-05 14:32 ` [PATCH v5 13/31] hw/intc/i8259: Introduce i8259 proxy "isa-pic" Bernhard Beschow
2023-01-07 23:45 ` Mark Cave-Ayland
2023-01-08 15:30 ` Bernhard Beschow
2023-01-05 14:32 ` Bernhard Beschow [this message]
2023-01-05 14:32 ` [PATCH v5 15/31] hw/isa/piix3: Create IDE controller in host device Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 16/31] hw/isa/piix3: Wire up ACPI interrupt internally Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 17/31] hw/isa/piix3: Resolve redundant PIIX_NUM_PIC_IRQS Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 18/31] hw/isa/piix3: Rename pci_piix3_props for sharing with PIIX4 Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 19/31] hw/isa/piix3: Rename piix3_reset() " Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 20/31] hw/isa/piix3: Drop the "3" from PIIX base class Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 21/31] hw/isa/piix4: Make PIIX4's ACPI and USB functions optional Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 22/31] hw/isa/piix4: Remove unused inbound ISA interrupt lines Bernhard Beschow
2023-01-07 23:47 ` Mark Cave-Ayland
2023-01-05 14:32 ` [PATCH v5 23/31] hw/isa/piix4: Use ISA PIC device Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 24/31] hw/isa/piix4: Reuse struct PIIXState from PIIX3 Bernhard Beschow
2023-01-07 23:48 ` Mark Cave-Ayland
2023-01-08 15:31 ` Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 25/31] hw/isa/piix4: Rename reset control operations to match PIIX3 Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 26/31] hw/isa/piix3: Merge hw/isa/piix4.c Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 27/31] hw/isa/piix: Harmonize names of reset control memory regions Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 28/31] hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4 Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 29/31] hw/isa/piix: Rename functions to be shared for interrupt triggering Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 30/31] hw/isa/piix: Consolidate IRQ triggering Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 31/31] hw/isa/piix: Share PIIX3's base class with PIIX4 Bernhard Beschow
2023-01-05 16:39 ` [PATCH v5 00/31] Consolidate PIIX south bridges Michael S. Tsirkin
2023-01-05 17:29 ` Bernhard Beschow
2023-01-07 23:57 ` Mark Cave-Ayland
2023-01-08 15:12 ` Bernhard Beschow
2023-01-08 18:28 ` Philippe Mathieu-Daudé
2023-01-08 21:18 ` Bernhard Beschow
2023-01-09 17:33 ` Bernhard Beschow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230105143228.244965-15-shentey@gmail.com \
--to=shentey@gmail.com \
--cc=ani@anisinha.ca \
--cc=aurelien@aurel32.net \
--cc=eduardo@habkost.net \
--cc=f4bug@amsat.org \
--cc=hpoussin@reactos.org \
--cc=imammedo@redhat.com \
--cc=jiaxun.yang@flygoat.com \
--cc=jsnow@redhat.com \
--cc=kraxel@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).