qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Bernhard Beschow <shentey@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Eduardo Habkost" <eduardo@habkost.net>,
	qemu-block@nongnu.org, "Hervé Poussineau" <hpoussin@reactos.org>,
	"Ani Sinha" <ani@anisinha.ca>,
	"Richard Henderson" <richard.henderson@linaro.org>,
	"Jiaxun Yang" <jiaxun.yang@flygoat.com>,
	"Aurelien Jarno" <aurelien@aurel32.net>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Igor Mammedov" <imammedo@redhat.com>,
	"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
	"John Snow" <jsnow@redhat.com>,
	"Gerd Hoffmann" <kraxel@redhat.com>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"Bernhard Beschow" <shentey@gmail.com>
Subject: [PATCH v5 24/31] hw/isa/piix4: Reuse struct PIIXState from PIIX3
Date: Thu,  5 Jan 2023 15:32:21 +0100	[thread overview]
Message-ID: <20230105143228.244965-25-shentey@gmail.com> (raw)
In-Reply-To: <20230105143228.244965-1-shentey@gmail.com>

Now that PIIX4 also uses the "proxy-pic", both implementations
can share the same struct.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221022150508.26830-34-shentey@gmail.com>
---
 hw/isa/piix4.c | 51 +++++++++++++++-----------------------------------
 1 file changed, 15 insertions(+), 36 deletions(-)

diff --git a/hw/isa/piix4.c b/hw/isa/piix4.c
index eae4db0182..ce88377630 100644
--- a/hw/isa/piix4.c
+++ b/hw/isa/piix4.c
@@ -42,32 +42,10 @@
 #include "sysemu/runstate.h"
 #include "qom/object.h"
 
-struct PIIX4State {
-    PCIDevice dev;
-
-    ISAPICState pic;
-    RTCState rtc;
-    PCIIDEState ide;
-    UHCIState uhci;
-    PIIX4PMState pm;
-
-    uint32_t smb_io_base;
-
-    /* Reset Control Register */
-    MemoryRegion rcr_mem;
-    uint8_t rcr;
-
-    bool has_acpi;
-    bool has_usb;
-    bool smm_enabled;
-};
-
-OBJECT_DECLARE_SIMPLE_TYPE(PIIX4State, PIIX4_PCI_DEVICE)
-
 static void piix4_set_irq(void *opaque, int irq_num, int level)
 {
     int i, pic_irq, pic_level;
-    PIIX4State *s = opaque;
+    PIIXState *s = opaque;
     PCIBus *bus = pci_get_bus(&s->dev);
 
     /* now we change the pic irq level according to the piix irq mappings */
@@ -87,7 +65,7 @@ static void piix4_set_irq(void *opaque, int irq_num, int level)
 
 static void piix4_isa_reset(DeviceState *dev)
 {
-    PIIX4State *d = PIIX4_PCI_DEVICE(dev);
+    PIIXState *d = PIIX_PCI_DEVICE(dev);
     uint8_t *pci_conf = d->dev.config;
 
     pci_conf[0x04] = 0x07; // master, memory and I/O
@@ -122,12 +100,13 @@ static void piix4_isa_reset(DeviceState *dev)
     pci_conf[0xac] = 0x00;
     pci_conf[0xae] = 0x00;
 
+    d->pic_levels = 0; /* not used in PIIX4 */
     d->rcr = 0;
 }
 
 static int piix4_post_load(void *opaque, int version_id)
 {
-    PIIX4State *s = opaque;
+    PIIXState *s = opaque;
 
     if (version_id == 2) {
         s->rcr = 0;
@@ -142,8 +121,8 @@ static const VMStateDescription vmstate_piix4 = {
     .minimum_version_id = 2,
     .post_load = piix4_post_load,
     .fields = (VMStateField[]) {
-        VMSTATE_PCI_DEVICE(dev, PIIX4State),
-        VMSTATE_UINT8_V(rcr, PIIX4State, 3),
+        VMSTATE_PCI_DEVICE(dev, PIIXState),
+        VMSTATE_UINT8_V(rcr, PIIXState, 3),
         VMSTATE_END_OF_LIST()
     }
 };
@@ -151,7 +130,7 @@ static const VMStateDescription vmstate_piix4 = {
 static void piix4_rcr_write(void *opaque, hwaddr addr, uint64_t val,
                             unsigned int len)
 {
-    PIIX4State *s = opaque;
+    PIIXState *s = opaque;
 
     if (val & 4) {
         qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
@@ -163,7 +142,7 @@ static void piix4_rcr_write(void *opaque, hwaddr addr, uint64_t val,
 
 static uint64_t piix4_rcr_read(void *opaque, hwaddr addr, unsigned int len)
 {
-    PIIX4State *s = opaque;
+    PIIXState *s = opaque;
 
     return s->rcr;
 }
@@ -180,7 +159,7 @@ static const MemoryRegionOps piix4_rcr_ops = {
 
 static void piix4_realize(PCIDevice *dev, Error **errp)
 {
-    PIIX4State *s = PIIX4_PCI_DEVICE(dev);
+    PIIXState *s = PIIX_PCI_DEVICE(dev);
     PCIBus *pci_bus = pci_get_bus(dev);
     ISABus *isa_bus;
 
@@ -250,7 +229,7 @@ static void piix4_realize(PCIDevice *dev, Error **errp)
 
 static void piix4_init(Object *obj)
 {
-    PIIX4State *s = PIIX4_PCI_DEVICE(obj);
+    PIIXState *s = PIIX_PCI_DEVICE(obj);
 
     object_initialize_child(obj, "pic", &s->pic, TYPE_ISA_PIC);
     object_initialize_child(obj, "rtc", &s->rtc, TYPE_MC146818_RTC);
@@ -258,10 +237,10 @@ static void piix4_init(Object *obj)
 }
 
 static Property piix4_props[] = {
-    DEFINE_PROP_UINT32("smb_io_base", PIIX4State, smb_io_base, 0),
-    DEFINE_PROP_BOOL("has-acpi", PIIX4State, has_acpi, true),
-    DEFINE_PROP_BOOL("has-usb", PIIX4State, has_usb, true),
-    DEFINE_PROP_BOOL("smm-enabled", PIIX4State, smm_enabled, false),
+    DEFINE_PROP_UINT32("smb_io_base", PIIXState, smb_io_base, 0),
+    DEFINE_PROP_BOOL("has-acpi", PIIXState, has_acpi, true),
+    DEFINE_PROP_BOOL("has-usb", PIIXState, has_usb, true),
+    DEFINE_PROP_BOOL("smm-enabled", PIIXState, smm_enabled, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -289,7 +268,7 @@ static void piix4_class_init(ObjectClass *klass, void *data)
 static const TypeInfo piix4_info = {
     .name          = TYPE_PIIX4_PCI_DEVICE,
     .parent        = TYPE_PCI_DEVICE,
-    .instance_size = sizeof(PIIX4State),
+    .instance_size = sizeof(PIIXState),
     .instance_init = piix4_init,
     .class_init    = piix4_class_init,
     .interfaces = (InterfaceInfo[]) {
-- 
2.39.0



  parent reply	other threads:[~2023-01-05 14:35 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-05 14:31 [PATCH v5 00/31] Consolidate PIIX south bridges Bernhard Beschow
2023-01-05 14:31 ` [PATCH v5 01/31] hw/mips/malta: Introduce PIIX4_PCI_DEVFN definition Bernhard Beschow
2023-01-05 14:31 ` [PATCH v5 02/31] hw/mips/malta: Set PIIX4 IRQ routes in embedded bootloader Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 03/31] hw/isa/piix4: Correct IRQRC[A:D] reset values Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 04/31] hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 05/31] hw/usb/hcd-uhci: Introduce TYPE_ defines for device models Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 06/31] hw/i386/pc_piix: Associate pci_map_irq_fn as soon as PCI bus is created Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 07/31] hw/i386/pc_piix: Allow for setting properties before realizing PIIX3 south bridge Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 08/31] hw/i386/pc: Create RTC controllers in south bridges Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 09/31] hw/i386/pc: No need for rtc_state to be an out-parameter Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 10/31] hw/isa/piix3: Create USB controller in host device Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 11/31] hw/isa/piix3: Create power management " Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 12/31] hw/intc/i8259: Make using the isa_pic singleton more type-safe Bernhard Beschow
2023-01-07 23:28   ` Mark Cave-Ayland
2023-01-05 14:32 ` [PATCH v5 13/31] hw/intc/i8259: Introduce i8259 proxy "isa-pic" Bernhard Beschow
2023-01-07 23:45   ` Mark Cave-Ayland
2023-01-08 15:30     ` Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 14/31] hw/isa/piix3: Create ISA PIC in host device Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 15/31] hw/isa/piix3: Create IDE controller " Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 16/31] hw/isa/piix3: Wire up ACPI interrupt internally Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 17/31] hw/isa/piix3: Resolve redundant PIIX_NUM_PIC_IRQS Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 18/31] hw/isa/piix3: Rename pci_piix3_props for sharing with PIIX4 Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 19/31] hw/isa/piix3: Rename piix3_reset() " Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 20/31] hw/isa/piix3: Drop the "3" from PIIX base class Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 21/31] hw/isa/piix4: Make PIIX4's ACPI and USB functions optional Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 22/31] hw/isa/piix4: Remove unused inbound ISA interrupt lines Bernhard Beschow
2023-01-07 23:47   ` Mark Cave-Ayland
2023-01-05 14:32 ` [PATCH v5 23/31] hw/isa/piix4: Use ISA PIC device Bernhard Beschow
2023-01-05 14:32 ` Bernhard Beschow [this message]
2023-01-07 23:48   ` [PATCH v5 24/31] hw/isa/piix4: Reuse struct PIIXState from PIIX3 Mark Cave-Ayland
2023-01-08 15:31     ` Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 25/31] hw/isa/piix4: Rename reset control operations to match PIIX3 Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 26/31] hw/isa/piix3: Merge hw/isa/piix4.c Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 27/31] hw/isa/piix: Harmonize names of reset control memory regions Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 28/31] hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4 Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 29/31] hw/isa/piix: Rename functions to be shared for interrupt triggering Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 30/31] hw/isa/piix: Consolidate IRQ triggering Bernhard Beschow
2023-01-05 14:32 ` [PATCH v5 31/31] hw/isa/piix: Share PIIX3's base class with PIIX4 Bernhard Beschow
2023-01-05 16:39 ` [PATCH v5 00/31] Consolidate PIIX south bridges Michael S. Tsirkin
2023-01-05 17:29   ` Bernhard Beschow
2023-01-07 23:57 ` Mark Cave-Ayland
2023-01-08 15:12   ` Bernhard Beschow
2023-01-08 18:28     ` Philippe Mathieu-Daudé
2023-01-08 21:18       ` Bernhard Beschow
2023-01-09 17:33       ` Bernhard Beschow

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230105143228.244965-25-shentey@gmail.com \
    --to=shentey@gmail.com \
    --cc=ani@anisinha.ca \
    --cc=aurelien@aurel32.net \
    --cc=eduardo@habkost.net \
    --cc=f4bug@amsat.org \
    --cc=hpoussin@reactos.org \
    --cc=imammedo@redhat.com \
    --cc=jiaxun.yang@flygoat.com \
    --cc=jsnow@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=marcel.apfelbaum@gmail.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=philmd@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).