From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Thomas Huth" <thuth@redhat.com>,
qemu-arm@nongnu.org, qemu-trivial@nongnu.org,
"Jan Kiszka" <jan.kiszka@web.de>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PATCH 3/5] hw/i2c/bitbang_i2c: Change state calling bitbang_i2c_set_state() helper
Date: Mon, 9 Jan 2023 09:41:19 +0100 [thread overview]
Message-ID: <20230109084121.72138-4-philmd@linaro.org> (raw)
In-Reply-To: <20230109084121.72138-1-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/i2c/bitbang_i2c.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/hw/i2c/bitbang_i2c.c b/hw/i2c/bitbang_i2c.c
index e41cb63daa..bf4b781393 100644
--- a/hw/i2c/bitbang_i2c.c
+++ b/hw/i2c/bitbang_i2c.c
@@ -26,13 +26,19 @@ do { printf("bitbang_i2c: " fmt , ## __VA_ARGS__); } while (0)
#define DPRINTF(fmt, ...) do {} while(0)
#endif
+static void bitbang_i2c_set_state(bitbang_i2c_interface *i2c,
+ bitbang_i2c_state state)
+{
+ i2c->state = state;
+}
+
static void bitbang_i2c_enter_stop(bitbang_i2c_interface *i2c)
{
DPRINTF("STOP\n");
if (i2c->current_addr >= 0)
i2c_end_transfer(i2c->bus);
i2c->current_addr = -1;
- i2c->state = STOPPED;
+ bitbang_i2c_set_state(i2c, STOPPED);
}
/* Set device data pin. */
@@ -69,7 +75,7 @@ int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level)
if (level == 0) {
DPRINTF("START\n");
/* START condition. */
- i2c->state = SENDING_BIT7;
+ bitbang_i2c_set_state(i2c, SENDING_BIT7);
i2c->current_addr = -1;
} else {
/* STOP condition. */
@@ -96,7 +102,7 @@ int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level)
case SENDING_BIT7 ... SENDING_BIT0:
i2c->buffer = (i2c->buffer << 1) | data;
/* will end up in WAITING_FOR_ACK */
- i2c->state++;
+ bitbang_i2c_set_state(i2c, i2c->state + 1);
return bitbang_i2c_ret(i2c, 1);
case WAITING_FOR_ACK:
@@ -117,13 +123,14 @@ int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level)
* device we were sending to decided to NACK us).
*/
DPRINTF("Got NACK\n");
+ bitbang_i2c_set_state(i2c, SENT_NACK);
bitbang_i2c_enter_stop(i2c);
return bitbang_i2c_ret(i2c, 1);
}
if (i2c->current_addr & 1) {
- i2c->state = RECEIVING_BIT7;
+ bitbang_i2c_set_state(i2c, RECEIVING_BIT7);
} else {
- i2c->state = SENDING_BIT7;
+ bitbang_i2c_set_state(i2c, SENDING_BIT7);
}
return bitbang_i2c_ret(i2c, 0);
}
@@ -134,18 +141,18 @@ int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level)
case RECEIVING_BIT6 ... RECEIVING_BIT0:
data = i2c->buffer >> 7;
/* will end up in SENDING_ACK */
- i2c->state++;
+ bitbang_i2c_set_state(i2c, i2c->state + 1);
i2c->buffer <<= 1;
return bitbang_i2c_ret(i2c, data);
case SENDING_ACK:
- i2c->state = RECEIVING_BIT7;
if (data != 0) {
DPRINTF("NACKED\n");
- i2c->state = SENT_NACK;
+ bitbang_i2c_set_state(i2c, SENT_NACK);
i2c_nack(i2c->bus);
} else {
DPRINTF("ACKED\n");
+ bitbang_i2c_set_state(i2c, RECEIVING_BIT7);
}
return bitbang_i2c_ret(i2c, 1);
}
--
2.38.1
next prev parent reply other threads:[~2023-01-09 8:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-09 8:41 [PATCH 0/5] hw/i2c/bitbang_i2c: Housekeeping Philippe Mathieu-Daudé
2023-01-09 8:41 ` [PATCH 1/5] hw/i2c/bitbang_i2c: Define TYPE_GPIO_I2C in public header Philippe Mathieu-Daudé
2023-01-09 16:04 ` Richard Henderson
2023-01-09 8:41 ` [PATCH 2/5] hw/i2c/bitbang_i2c: Remove unused dummy MemoryRegion Philippe Mathieu-Daudé
2023-01-09 16:05 ` Richard Henderson
2023-01-09 8:41 ` Philippe Mathieu-Daudé [this message]
2023-01-09 16:07 ` [PATCH 3/5] hw/i2c/bitbang_i2c: Change state calling bitbang_i2c_set_state() helper Richard Henderson
2023-01-09 8:41 ` [PATCH 4/5] hw/i2c/bitbang_i2c: Trace state changes Philippe Mathieu-Daudé
2023-01-09 16:07 ` Richard Henderson
2023-01-10 8:26 ` Philippe Mathieu-Daudé
2023-01-09 8:41 ` [PATCH 5/5] hw/i2c/bitbang_i2c: Convert DPRINTF() to trace events Philippe Mathieu-Daudé
2023-01-09 16:10 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230109084121.72138-4-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=jan.kiszka@web.de \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).