From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>, Ani Sinha <ani@anisinha.ca>
Subject: [PATCH 39/40] pcihp: generate populated non-hotpluggble slot descriptions on non-hotplug path
Date: Thu, 12 Jan 2023 15:03:11 +0100 [thread overview]
Message-ID: <20230112140312.3096331-40-imammedo@redhat.com> (raw)
In-Reply-To: <20230112140312.3096331-1-imammedo@redhat.com>
Generating slots descriptions populated by non-hotpluggable devices
is akward at best and complicates hotplug path (build_append_pcihp_slots)
needlessly, and builds only dynamic _DSM for such slots which is overlkill.
Clean it up and let non-hotplug path (build_append_pci_bus_devices)
to handle that task.
Such clean up effectively drops dynamic _DSM methods on non-hotpluggable
slots (even though bus itself is hotpluggable), but in practice it
affects only built-in devices (ide controllers/various bridges) that don't
use acpi-index anyways so effectively it doesn't matter (NICs are hotpluggble).
Follow up series will add static _DSM for non-hotpluggble devices/buses
that will not depend on ACPI PCI hotplug at all, and potentially would
allows us to reuse non-hotplug path elsewhere (PBX/microvm/arm-virt),
including new support for acpi-index for non-hotpluggable devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
hw/i386/acpi-build.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 50504578b9..c085bf7812 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -414,6 +414,7 @@ static bool is_devfn_ignored_hotplug(const int devfn, const PCIBus *bus)
PCIDevice *pdev = bus->devices[devfn];
if (pdev) {
return is_devfn_ignored_generic(devfn, bus) ||
+ !DEVICE_GET_CLASS(pdev)->hotpluggable ||
/* Cold plugged bridges aren't themselves hot-pluggable */
(IS_PCI_BRIDGE(pdev) && !DEVICE(pdev)->hotplugged);
} else { /* non populated slots */
@@ -440,17 +441,14 @@ static void build_append_pcihp_slots(Aml *parent_scope, PCIBus *bus,
notify_method = aml_method("DVNT", 2, AML_NOTSERIALIZED);
for (devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) {
- PCIDevice *pdev = bus->devices[devfn];
int slot = PCI_SLOT(devfn);
int adr = slot << 16 | PCI_FUNC(devfn);
- bool hotpluggbale_slot = true;
if (is_devfn_ignored_hotplug(devfn, bus)) {
continue;
}
- if (pdev) {
- hotpluggbale_slot = DEVICE_GET_CLASS(pdev)->hotpluggable;
+ if (bus->devices[devfn]) {
dev = aml_scope("S%.02X", devfn);
} else {
dev = aml_device("S%.02X", devfn);
@@ -464,17 +462,15 @@ static void build_append_pcihp_slots(Aml *parent_scope, PCIBus *bus,
aml_append(dev, aml_name_decl("ASUN", aml_int(slot)));
aml_append(dev, aml_pci_device_dsm());
- if (hotpluggbale_slot) {
- aml_append(dev, aml_name_decl("_SUN", aml_int(slot)));
- /* add _EJ0 to make slot hotpluggable */
- method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
- aml_append(method,
- aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))
- );
- aml_append(dev, method);
+ aml_append(dev, aml_name_decl("_SUN", aml_int(slot)));
+ /* add _EJ0 to make slot hotpluggable */
+ method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
+ aml_append(method,
+ aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))
+ );
+ aml_append(dev, method);
- build_append_pcihp_notify_entry(notify_method, slot);
- }
+ build_append_pcihp_notify_entry(notify_method, slot);
/* device descriptor has been composed, add it into parent context */
aml_append(parent_scope, dev);
@@ -493,8 +489,9 @@ void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus)
for (devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) {
/* ACPI spec: 1.0b: Table 6-2 _ADR Object Bus Types, PCI type */
int adr = PCI_SLOT(devfn) << 16 | PCI_FUNC(devfn);
+ PCIDevice *pdev = bus->devices[devfn];
- if (!bus->devices[devfn] || is_devfn_ignored_generic(devfn, bus)) {
+ if (!pdev || is_devfn_ignored_generic(devfn, bus)) {
continue;
}
--
2.31.1
next prev parent reply other threads:[~2023-01-12 14:32 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-12 14:02 [PATCH 00/40] x86: fixing and cleaning up ACPI PCI code part 3 Igor Mammedov
2023-01-12 14:02 ` [PATCH 01/40] tests: qtest: print device_add error before failing test Igor Mammedov
2023-01-12 14:02 ` [PATCH 02/40] tests: acpi: cleanup arguments to make them more readable Igor Mammedov
2023-01-12 14:02 ` [PATCH 03/40] tests: acpi: whitelist DSDT blobs for tests that use pci-bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 04/40] tests: acpi: extend pcihp with nested bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 05/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 06/40] tests: acpi: cleanup use_uefi argument usage Igor Mammedov
2023-01-12 14:02 ` [PATCH 07/40] pci_bridge: remove whitespace Igor Mammedov
2023-01-12 14:02 ` [PATCH 08/40] x86: acpi: pcihp: clean up duplicate bridge_in_acpi assignment Igor Mammedov
2023-01-12 14:02 ` [PATCH 09/40] pci: acpi hotplug: rename x-native-hotplug to x-do-not-expose-native-hotplug-cap Igor Mammedov
2023-01-12 14:02 ` [PATCH 10/40] pcihp: piix4: do not call acpi_pcihp_reset() when ACPI PCI hotplug is disabled Igor Mammedov
2023-01-12 14:02 ` [PATCH 11/40] pci: acpihp: assign BSEL only to coldplugged bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 12/40] x86: pcihp: fix invalid AML PCNT calls to hotplugged bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 13/40] tests: boot_sector_test: avoid crashing if status is not available yet Igor Mammedov
2023-01-12 14:02 ` [PATCH 14/40] tests: acpi: extend bridge tests with hotplugged bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 15/40] tests: boot_sector_test(): make it multi-shot Igor Mammedov
2023-01-12 14:02 ` [PATCH 16/40] tests: acpi: add reboot cycle to bridge test Igor Mammedov
2023-01-12 14:02 ` [PATCH 17/40] tests: acpi: whitelist DSDT before refactoring acpi based PCI hotplug machinery Igor Mammedov
2023-01-12 14:02 ` [PATCH 18/40] pcihp: drop pcihp_bridge_en dependency when composing PCNT method Igor Mammedov
2023-01-12 14:02 ` [PATCH 19/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 20/40] tests: acpi: whitelist DSDT before refactoring acpi based PCI hotplug machinery Igor Mammedov
2023-01-12 14:02 ` [PATCH 21/40] pcihp: compose PCNT callchain right before its user _GPE._E01 Igor Mammedov
2023-01-12 14:02 ` [PATCH 22/40] pcihp: do not put empty PCNT in DSDT Igor Mammedov
2023-01-12 14:02 ` [PATCH 23/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 24/40] whitelist DSDT before adding endpoint devices to bridge testcases Igor Mammedov
2023-01-12 14:02 ` [PATCH 25/40] tests: acpi: add endpoint devices to bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 26/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 27/40] x86: pcihp: acpi: prepare slot ignore rule to work with self describing bridges Igor Mammedov
2023-01-12 14:03 ` [PATCH 28/40] pci: acpi: wire up AcpiDevAmlIf interface to generic bridge Igor Mammedov
2023-01-12 14:03 ` [PATCH 29/40] pcihp: make bridge describe itself using AcpiDevAmlIfClass:build_dev_aml Igor Mammedov
2023-01-12 14:03 ` [PATCH 30/40] pci: make sure pci_bus_is_express() won't error out with "discards ‘const’ qualifier" Igor Mammedov
2023-01-12 14:03 ` [PATCH 31/40] pcihp: isolate rule whether slot should be described in DSDT Igor Mammedov
2023-01-12 14:03 ` [PATCH 32/40] tests: acpi: whitelist DSDT before decoupling PCI hotplug code from basic slots description Igor Mammedov
2023-01-12 14:03 ` [PATCH 33/40] pcihp: acpi: decouple hotplug and generic " Igor Mammedov
2023-01-12 14:03 ` [PATCH 34/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:03 ` [PATCH 35/40] tests: acpi: whitelist DSDT blobs before removing dynamic _DSM on coldplugged bridges Igor Mammedov
2023-01-12 14:03 ` [PATCH 36/40] pcihp: acpi: ignore coldplugged bridges when composing hotpluggable slots Igor Mammedov
2023-01-12 14:03 ` [PATCH 37/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:03 ` [PATCH 38/40] tests: acpi: whitelist DSDT before moving non-hotpluggble slots description from hotplug path Igor Mammedov
2023-01-12 14:03 ` Igor Mammedov [this message]
2023-01-12 14:03 ` [PATCH 40/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-25 17:02 ` [PATCH 00/40] x86: fixing and cleaning up ACPI PCI code part 3 Igor Mammedov
2023-01-25 17:34 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230112140312.3096331-40-imammedo@redhat.com \
--to=imammedo@redhat.com \
--cc=ani@anisinha.ca \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).