qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Bernhard Beschow" <shentey@gmail.com>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Michael S . Tsirkin" <mst@redhat.com>
Subject: [PULL 33/46] hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig
Date: Fri, 13 Jan 2023 16:45:19 +0100	[thread overview]
Message-ID: <20230113154532.49979-34-philmd@linaro.org> (raw)
In-Reply-To: <20230113154532.49979-1-philmd@linaro.org>

From: Bernhard Beschow <shentey@gmail.com>

Tracking dependencies via Kconfig seems much cleaner.

Note that PIIX4 already depends on ACPI_PIIX4.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230109172347.1830-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 configs/devices/mips-softmmu/common.mak | 2 --
 hw/mips/Kconfig                         | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/configs/devices/mips-softmmu/common.mak b/configs/devices/mips-softmmu/common.mak
index a125e74f24..7da99327a7 100644
--- a/configs/devices/mips-softmmu/common.mak
+++ b/configs/devices/mips-softmmu/common.mak
@@ -17,9 +17,7 @@ CONFIG_I8254=y
 CONFIG_PCSPK=y
 CONFIG_PCKBD=y
 CONFIG_FDC=y
-CONFIG_ACPI_PIIX4=y
 CONFIG_I8257=y
-CONFIG_PIIX4=y
 CONFIG_IDE_ISA=y
 CONFIG_PFLASH_CFI01=y
 CONFIG_I8259=y
diff --git a/hw/mips/Kconfig b/hw/mips/Kconfig
index 7a55143f8a..da3a37e215 100644
--- a/hw/mips/Kconfig
+++ b/hw/mips/Kconfig
@@ -2,6 +2,7 @@ config MALTA
     bool
     select GT64120
     select ISA_SUPERIO
+    select PIIX4
 
 config MIPSSIM
     bool
-- 
2.38.1



  parent reply	other threads:[~2023-01-13 16:27 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-13 15:44 [PULL 00/46] MIPS patches for 2023-01-13 Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 01/46] hw/mips/malta: Split FPGA LEDs/ASCII display updates Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 02/46] hw/mips/malta: Trace " Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 03/46] hw/mips/gt64xxx_pci: Accumulate address space changes Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 04/46] hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE MemoryRegionOps Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 05/46] hw/mips/Kconfig: Introduce CONFIG_GT64120 to select gt64xxx_pci.c Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 06/46] hw/mips/gt64xxx_pci: Let the GT64120 manage the lower 512MiB hole Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 07/46] hw/mips/gt64xxx_pci: Manage endian bits with the RegisterFields API Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 08/46] hw/mips/gt64xxx_pci: Add a 'cpu-little-endian' qdev property Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 09/46] hw/mips/malta: Explicit GT64120 endianness upon device creation Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 10/46] hw/mips/meson: Make gt64xxx_pci.c endian-agnostic Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 11/46] hw/mips/gt64xxx_pci: Move it to hw/pci-host/ Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 12/46] tests/avocado: Add tests booting YAMON ROM on MIPS Malta machines Philippe Mathieu-Daudé
2023-01-13 15:44 ` [PULL 13/46] hw/mips/bootloader: Handle buffers as opaque arrays Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 14/46] hw/mips/bootloader: Implement nanoMIPS NOP opcode generator Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 15/46] hw/mips/bootloader: Implement nanoMIPS SW " Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 16/46] hw/mips/bootloader: Implement nanoMIPS LI (LUI+ORI) " Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 17/46] hw/mips/bootloader: Implement nanoMIPS JALRc " Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 18/46] hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (1/5) Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 19/46] hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (2/5) Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 20/46] hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (3/5) Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 21/46] hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (4/5) Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 22/46] hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (5/5) Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 23/46] hw/mips/malta: Merge common BL code as bl_setup_gt64120_jump_kernel() Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 24/46] hw/mips/malta: Introduce PIIX4_PCI_DEVFN definition Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 25/46] hw/mips/malta: Set PIIX4 IRQ routes in embedded bootloader Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 26/46] hw/isa/piix4: Correct IRQRC[A:D] reset values Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 27/46] mips: Remove support for trap and emulate KVM Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 28/46] mips: Always include nanomips disassembler Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 29/46] hw/pci/pci_host: Trace config accesses on unexisting functions Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 30/46] hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs() Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 31/46] hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 32/46] hw/isa/piix4: " Philippe Mathieu-Daudé
2023-01-13 15:45 ` Philippe Mathieu-Daudé [this message]
2023-01-13 15:45 ` [PULL 34/46] hw/usb/hcd-uhci: Introduce TYPE_ defines for device models Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 35/46] hw/intc/i8259: Make using the isa_pic singleton more type-safe Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 36/46] hw/intc: Extract the IRQ counting functions into a separate file Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 37/46] hw/core/qdev-properties-system: Allow the 'slew' policy only on x86 Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 38/46] hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 39/46] softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818 Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 40/46] hw/pci-host/bonito: Convert to 3-phase reset Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 41/46] hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 42/46] hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 43/46] hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 44/46] hw/mips/boston: Rename MachineState 'mc' pointer to 'ms' Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 45/46] target/mips: Restrict 'qapi-commands-machine.h' to system emulation Philippe Mathieu-Daudé
2023-01-13 15:45 ` [PULL 46/46] scripts/git.orderfile: Display MAINTAINERS changes first Philippe Mathieu-Daudé
2023-01-13 17:57 ` [PULL 00/46] MIPS patches for 2023-01-13 Peter Maydell
2023-01-13 20:31   ` Philippe Mathieu-Daudé
2023-01-16 15:00     ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230113154532.49979-34-philmd@linaro.org \
    --to=philmd@linaro.org \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=shentey@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).