From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Igor Mammedov <imammedo@redhat.com>, Ani Sinha <ani@anisinha.ca>,
Paolo Bonzini <pbonzini@redhat.com>,
Richard Henderson <richard.henderson@linaro.org>,
Eduardo Habkost <eduardo@habkost.net>,
Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Subject: [PULL 49/56] pcihp: generate populated non-hotpluggble slot descriptions on non-hotplug path
Date: Mon, 30 Jan 2023 15:21:24 -0500 [thread overview]
Message-ID: <20230130201810.11518-50-mst@redhat.com> (raw)
In-Reply-To: <20230130201810.11518-1-mst@redhat.com>
From: Igor Mammedov <imammedo@redhat.com>
Generating slots descriptions populated by non-hotpluggable devices
is akward at best and complicates hotplug path (build_append_pcihp_slots)
needlessly, and builds only dynamic _DSM for such slots which is overlkill.
Clean it up and let non-hotplug path (build_append_pci_bus_devices)
to handle that task.
Such clean up effectively drops dynamic _DSM methods on non-hotpluggable
slots (even though bus itself is hotpluggable), but in practice it
affects only built-in devices (ide controllers/various bridges) that don't
use acpi-index anyways so effectively it doesn't matter (NICs are hotpluggble).
Follow up series will add static _DSM for non-hotpluggble devices/buses
that will not depend on ACPI PCI hotplug at all, and potentially would
allows us to reuse non-hotplug path elsewhere (PBX/microvm/arm-virt),
including new support for acpi-index for non-hotpluggable devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-40-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/i386/acpi-build.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index a02608c215..145389aa58 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -412,6 +412,7 @@ static bool is_devfn_ignored_hotplug(const int devfn, const PCIBus *bus)
PCIDevice *pdev = bus->devices[devfn];
if (pdev) {
return is_devfn_ignored_generic(devfn, bus) ||
+ !DEVICE_GET_CLASS(pdev)->hotpluggable ||
/* Cold plugged bridges aren't themselves hot-pluggable */
(IS_PCI_BRIDGE(pdev) && !DEVICE(pdev)->hotplugged);
} else { /* non populated slots */
@@ -438,17 +439,14 @@ static void build_append_pcihp_slots(Aml *parent_scope, PCIBus *bus,
notify_method = aml_method("DVNT", 2, AML_NOTSERIALIZED);
for (devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) {
- PCIDevice *pdev = bus->devices[devfn];
int slot = PCI_SLOT(devfn);
int adr = slot << 16 | PCI_FUNC(devfn);
- bool hotpluggbale_slot = true;
if (is_devfn_ignored_hotplug(devfn, bus)) {
continue;
}
- if (pdev) {
- hotpluggbale_slot = DEVICE_GET_CLASS(pdev)->hotpluggable;
+ if (bus->devices[devfn]) {
dev = aml_scope("S%.02X", devfn);
} else {
dev = aml_device("S%.02X", devfn);
@@ -462,17 +460,15 @@ static void build_append_pcihp_slots(Aml *parent_scope, PCIBus *bus,
aml_append(dev, aml_name_decl("ASUN", aml_int(slot)));
aml_append(dev, aml_pci_device_dsm());
- if (hotpluggbale_slot) {
- aml_append(dev, aml_name_decl("_SUN", aml_int(slot)));
- /* add _EJ0 to make slot hotpluggable */
- method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
- aml_append(method,
- aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))
- );
- aml_append(dev, method);
+ aml_append(dev, aml_name_decl("_SUN", aml_int(slot)));
+ /* add _EJ0 to make slot hotpluggable */
+ method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
+ aml_append(method,
+ aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))
+ );
+ aml_append(dev, method);
- build_append_pcihp_notify_entry(notify_method, slot);
- }
+ build_append_pcihp_notify_entry(notify_method, slot);
/* device descriptor has been composed, add it into parent context */
aml_append(parent_scope, dev);
@@ -491,8 +487,9 @@ void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus)
for (devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) {
/* ACPI spec: 1.0b: Table 6-2 _ADR Object Bus Types, PCI type */
int adr = PCI_SLOT(devfn) << 16 | PCI_FUNC(devfn);
+ PCIDevice *pdev = bus->devices[devfn];
- if (!bus->devices[devfn] || is_devfn_ignored_generic(devfn, bus)) {
+ if (!pdev || is_devfn_ignored_generic(devfn, bus)) {
continue;
}
--
MST
next prev parent reply other threads:[~2023-01-30 20:32 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-30 20:18 [PULL 00/56] virtio,pc,pci: features, cleanups, fixes Michael S. Tsirkin
2023-01-30 20:18 ` [PULL 01/56] shpc: disallow unplug when power indicator is blinking Michael S. Tsirkin
2023-01-30 20:18 ` [PULL 02/56] hw/i386/acpi-build: Remove unused attributes Michael S. Tsirkin
2023-01-30 20:18 ` [PULL 03/56] hw/isa/isa-bus: Turn isa_build_aml() into qbus_build_aml() Michael S. Tsirkin
2023-01-30 20:18 ` [PULL 04/56] hw/acpi/piix4: No need to #include "hw/southbridge/piix.h" Michael S. Tsirkin
2023-01-30 20:18 ` [PULL 05/56] hw/acpi/acpi_dev_interface: Remove unused parameter from AcpiDeviceIfClass::madt_cpu Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 06/56] vhost-user: Correct a reference of TARGET_AARCH64 Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 07/56] hw/pci-host: Use register definitions from PCI standard Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 08/56] virtio-rng-pci: fix migration compat for vectors Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 09/56] intel-iommu: Document iova_tree Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 12/56] tests: acpi: cleanup arguments to make them more readable Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 13/56] tests: acpi: whitelist DSDT blobs for tests that use pci-bridges Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 14/56] tests: acpi: extend pcihp with nested bridges Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 15/56] tests: acpi: update expected blobs Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 16/56] tests: acpi: cleanup use_uefi argument usage Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 17/56] pci_bridge: remove whitespace Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 18/56] x86: acpi: pcihp: clean up duplicate bridge_in_acpi assignment Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 19/56] pci: acpi hotplug: rename x-native-hotplug to x-do-not-expose-native-hotplug-cap Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 20/56] pcihp: piix4: do not call acpi_pcihp_reset() when ACPI PCI hotplug is disabled Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 21/56] pci: acpihp: assign BSEL only to coldplugged bridges Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 22/56] x86: pcihp: fix invalid AML PCNT calls to hotplugged bridges Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 23/56] tests: boot_sector_test: avoid crashing if status is not available yet Michael S. Tsirkin
2023-01-30 20:19 ` [PULL 10/56] x86: don't let decompressed kernel image clobber setup_data Michael S. Tsirkin
2023-01-30 20:19 ` Michael S. Tsirkin
2023-01-31 19:39 ` Jason A. Donenfeld
2023-01-31 21:27 ` Michael S. Tsirkin
2023-01-31 20:54 ` H. Peter Anvin
2023-01-31 21:22 ` Jason A. Donenfeld
2023-02-01 5:40 ` H. Peter Anvin
2023-01-31 23:32 ` Jason A. Donenfeld
2023-01-30 20:20 ` [PULL 11/56] tests: qtest: print device_add error before failing test Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 26/56] tests: acpi: add reboot cycle to bridge test Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 27/56] tests: acpi: whitelist DSDT before refactoring acpi based PCI hotplug machinery Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 28/56] pcihp: drop pcihp_bridge_en dependency when composing PCNT method Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 29/56] tests: acpi: update expected blobs Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 30/56] tests: acpi: whitelist DSDT before refactoring acpi based PCI hotplug machinery Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 24/56] tests: acpi: extend bridge tests with hotplugged bridges Michael S. Tsirkin
2023-01-30 20:20 ` Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 31/56] pcihp: compose PCNT callchain right before its user _GPE._E01 Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 32/56] pcihp: do not put empty PCNT in DSDT Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 25/56] tests: boot_sector_test(): make it multi-shot Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 33/56] tests: acpi: update expected blobs Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 34/56] whitelist DSDT before adding endpoint devices to bridge testcases Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 35/56] tests: acpi: add endpoint devices to bridges Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 36/56] tests: acpi: update expected blobs Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 37/56] x86: pcihp: acpi: prepare slot ignore rule to work with self describing bridges Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 38/56] pci: acpi: wire up AcpiDevAmlIf interface to generic bridge Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 39/56] pcihp: make bridge describe itself using AcpiDevAmlIfClass:build_dev_aml Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 40/56] pci: make sure pci_bus_is_express() won't error out with "discards ‘const’ qualifier" Michael S. Tsirkin
2023-01-30 20:20 ` [PULL 41/56] pcihp: isolate rule whether slot should be described in DSDT Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 42/56] tests: acpi: whitelist DSDT before decoupling PCI hotplug code from basic slots description Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 43/56] pcihp: acpi: decouple hotplug and generic " Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 44/56] tests: acpi: update expected blobs Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 45/56] tests: acpi: whitelist DSDT blobs before removing dynamic _DSM on coldplugged bridges Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 46/56] pcihp: acpi: ignore coldplugged bridges when composing hotpluggable slots Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 47/56] tests: acpi: update expected blobs Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 48/56] tests: acpi: whitelist DSDT before moving non-hotpluggble slots description from hotplug path Michael S. Tsirkin
2023-01-30 20:21 ` Michael S. Tsirkin [this message]
2023-01-30 20:21 ` [PULL 50/56] tests: acpi: update expected blobs Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 51/56] vhost-user: Skip unnecessary duplicated VHOST_USER_ADD/REM_MEM_REG requests Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 52/56] hw: Use TYPE_PCI_BUS definition where appropriate Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 53/56] tests/qtest/bios-tables-test: Make the test less verbose by default Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 54/56] Revert "vhost-user: Monitor slave channel in vhost_user_read()" Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 55/56] Revert "vhost-user: Introduce nested event loop " Michael S. Tsirkin
2023-01-30 20:21 ` [PULL 56/56] docs/pcie.txt: Replace ioh3420 with pcie-root-port Michael S. Tsirkin
2023-02-02 13:42 ` [PULL 00/56] virtio,pc,pci: features, cleanups, fixes Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230130201810.11518-50-mst@redhat.com \
--to=mst@redhat.com \
--cc=ani@anisinha.ca \
--cc=eduardo@habkost.net \
--cc=imammedo@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).