qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Manish Mishra <manish.mishra@nutanix.com>,
	"Daniel P . Berrange" <berrange@redhat.com>,
	Juan Quintela <quintela@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	peterx@redhat.com,
	Leonardo Bras Soares Passos <lsoaresp@redhat.com>
Subject: [PATCH v2 1/3] migration: Rework multi-channel checks on URI
Date: Thu,  2 Feb 2023 16:24:56 -0500	[thread overview]
Message-ID: <20230202212458.726496-2-peterx@redhat.com> (raw)
In-Reply-To: <20230202212458.726496-1-peterx@redhat.com>

The whole idea of multi-channel checks was not properly done, IMHO.

Currently we check multi-channel in a lot of places, but actually that's
not needed because we only need to check it right after we get the URI and
that should be it.

If the URI check succeeded, we should never need to check it again because
we must have it.  If it check fails, we should fail immediately on either
the qmp_migrate or qmp_migrate_incoming, instead of failingg it later after
the connection established.

Neither should we fail any set capabiliities like what we used to do here:

5ad15e8614 ("migration: allow enabling mutilfd for specific protocol only", 2021-10-19)

Because logically the URI will only be set later after the capability is
set, so it doesn't make a lot of sense to check the URI type when setting
the capability, because we're checking the cap with an old URI passed in,
and that may not even be the URI we're going to use later.

This patch mostly reverted all such checks for before, dropping the
variable migrate_allow_multi_channels and helpers.  Instead, add a common
helper to check URI for multi-channels for either qmp_migrate and
qmp_migrate_incoming and that should do all the proper checks.  The failure
will only trigger with the "migrate" or "migrate_incoming" command, or when
user specified "-incoming xxx" where "xxx" is not "defer".

With that, make postcopy_preempt_setup() as simple as creating the channel.

Signed-off-by: Peter Xu <peterx@redhat.com>
---
 migration/migration.c    | 56 +++++++++++++++++++---------------------
 migration/migration.h    |  3 ---
 migration/multifd.c      | 12 ++-------
 migration/postcopy-ram.c | 14 +---------
 migration/postcopy-ram.h |  2 +-
 5 files changed, 31 insertions(+), 56 deletions(-)

diff --git a/migration/migration.c b/migration/migration.c
index f4f7d207f0..ef7fceb5d7 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -182,16 +182,26 @@ static int migration_maybe_pause(MigrationState *s,
                                  int new_state);
 static void migrate_fd_cancel(MigrationState *s);
 
-static bool migrate_allow_multi_channels = true;
+static bool migration_needs_multiple_sockets(void)
+{
+    return migrate_use_multifd() || migrate_postcopy_preempt();
+}
 
-void migrate_protocol_allow_multi_channels(bool allow)
+static bool uri_supports_multi_channels(const char *uri)
 {
-    migrate_allow_multi_channels = allow;
+    return strstart(uri, "tcp:", NULL) || strstart(uri, "unix:", NULL) ||
+        strstart(uri, "vsock:", NULL);
 }
 
-bool migrate_multi_channels_is_allowed(void)
+static bool migration_uri_validate(const char *uri, Error **errp)
 {
-    return migrate_allow_multi_channels;
+    if (migration_needs_multiple_sockets() &&
+        !uri_supports_multi_channels(uri)) {
+        error_setg(errp, "Migration requires multi-channel URIs (e.g. tcp)");
+        return false;
+    }
+
+    return true;
 }
 
 static gint page_request_addr_cmp(gconstpointer ap, gconstpointer bp)
@@ -491,12 +501,15 @@ static void qemu_start_incoming_migration(const char *uri, Error **errp)
 {
     const char *p = NULL;
 
-    migrate_protocol_allow_multi_channels(false); /* reset it anyway */
+    /* URI is not suitable for migration? */
+    if (!migration_uri_validate(uri, errp)) {
+        return;
+    }
+
     qapi_event_send_migration(MIGRATION_STATUS_SETUP);
     if (strstart(uri, "tcp:", &p) ||
         strstart(uri, "unix:", NULL) ||
         strstart(uri, "vsock:", NULL)) {
-        migrate_protocol_allow_multi_channels(true);
         socket_start_incoming_migration(p ? p : uri, errp);
 #ifdef CONFIG_RDMA
     } else if (strstart(uri, "rdma:", &p)) {
@@ -721,11 +734,6 @@ void migration_fd_process_incoming(QEMUFile *f, Error **errp)
     migration_incoming_process();
 }
 
-static bool migration_needs_multiple_sockets(void)
-{
-    return migrate_use_multifd() || migrate_postcopy_preempt();
-}
-
 void migration_ioc_process_incoming(QIOChannel *ioc, Error **errp)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();
@@ -1347,15 +1355,6 @@ static bool migrate_caps_check(bool *cap_list,
     }
 #endif
 
-
-    /* incoming side only */
-    if (runstate_check(RUN_STATE_INMIGRATE) &&
-        !migrate_multi_channels_is_allowed() &&
-        cap_list[MIGRATION_CAPABILITY_MULTIFD]) {
-        error_setg(errp, "multifd is not supported by current protocol");
-        return false;
-    }
-
     if (cap_list[MIGRATION_CAPABILITY_POSTCOPY_PREEMPT]) {
         if (!cap_list[MIGRATION_CAPABILITY_POSTCOPY_RAM]) {
             error_setg(errp, "Postcopy preempt requires postcopy-ram");
@@ -2440,6 +2439,11 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,
     MigrationState *s = migrate_get_current();
     const char *p = NULL;
 
+    /* URI is not suitable for migration? */
+    if (!migration_uri_validate(uri, errp)) {
+        return;
+    }
+
     if (!migrate_prepare(s, has_blk && blk, has_inc && inc,
                          has_resume && resume, errp)) {
         /* Error detected, put into errp */
@@ -2452,11 +2456,9 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,
         }
     }
 
-    migrate_protocol_allow_multi_channels(false);
     if (strstart(uri, "tcp:", &p) ||
         strstart(uri, "unix:", NULL) ||
         strstart(uri, "vsock:", NULL)) {
-        migrate_protocol_allow_multi_channels(true);
         socket_start_outgoing_migration(s, p ? p : uri, &local_err);
 #ifdef CONFIG_RDMA
     } else if (strstart(uri, "rdma:", &p)) {
@@ -4309,12 +4311,8 @@ void migrate_fd_connect(MigrationState *s, Error *error_in)
     }
 
     /* This needs to be done before resuming a postcopy */
-    if (postcopy_preempt_setup(s, &local_err)) {
-        error_report_err(local_err);
-        migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
-                          MIGRATION_STATUS_FAILED);
-        migrate_fd_cleanup(s);
-        return;
+    if (migrate_postcopy_preempt()) {
+        postcopy_preempt_setup(s);
     }
 
     if (resume) {
diff --git a/migration/migration.h b/migration/migration.h
index 66511ce532..c351872360 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -474,7 +474,4 @@ void migration_cancel(const Error *error);
 void populate_vfio_info(MigrationInfo *info);
 void postcopy_temp_page_reset(PostcopyTmpPage *tmp_page);
 
-bool migrate_multi_channels_is_allowed(void);
-void migrate_protocol_allow_multi_channels(bool allow);
-
 #endif
diff --git a/migration/multifd.c b/migration/multifd.c
index eeb4fb87ee..dfe8eda5bf 100644
--- a/migration/multifd.c
+++ b/migration/multifd.c
@@ -512,7 +512,7 @@ void multifd_save_cleanup(void)
 {
     int i;
 
-    if (!migrate_use_multifd() || !migrate_multi_channels_is_allowed()) {
+    if (!migrate_use_multifd()) {
         return;
     }
     multifd_send_terminate_threads(NULL);
@@ -910,10 +910,6 @@ int multifd_save_setup(Error **errp)
     if (!migrate_use_multifd()) {
         return 0;
     }
-    if (!migrate_multi_channels_is_allowed()) {
-        error_setg(errp, "multifd is not supported by current protocol");
-        return -1;
-    }
 
     thread_count = migrate_multifd_channels();
     multifd_send_state = g_malloc0(sizeof(*multifd_send_state));
@@ -1018,7 +1014,7 @@ int multifd_load_cleanup(Error **errp)
 {
     int i;
 
-    if (!migrate_use_multifd() || !migrate_multi_channels_is_allowed()) {
+    if (!migrate_use_multifd()) {
         return 0;
     }
     multifd_recv_terminate_threads(NULL);
@@ -1172,10 +1168,6 @@ int multifd_load_setup(Error **errp)
         return 0;
     }
 
-    if (!migrate_multi_channels_is_allowed()) {
-        error_setg(errp, "multifd is not supported by current protocol");
-        return -1;
-    }
     thread_count = migrate_multifd_channels();
     multifd_recv_state = g_malloc0(sizeof(*multifd_recv_state));
     multifd_recv_state->params = g_new0(MultiFDRecvParams, thread_count);
diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index b98e95dab0..e2578dbd21 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -1631,22 +1631,10 @@ int postcopy_preempt_wait_channel(MigrationState *s)
     return s->postcopy_qemufile_src ? 0 : -1;
 }
 
-int postcopy_preempt_setup(MigrationState *s, Error **errp)
+void postcopy_preempt_setup(MigrationState *s)
 {
-    if (!migrate_postcopy_preempt()) {
-        return 0;
-    }
-
-    if (!migrate_multi_channels_is_allowed()) {
-        error_setg(errp, "Postcopy preempt is not supported as current "
-                   "migration stream does not support multi-channels.");
-        return -1;
-    }
-
     /* Kick an async task to connect */
     socket_send_channel_create(postcopy_preempt_send_channel_new, s);
-
-    return 0;
 }
 
 static void postcopy_pause_ram_fast_load(MigrationIncomingState *mis)
diff --git a/migration/postcopy-ram.h b/migration/postcopy-ram.h
index 25881c4127..d5604cbcf1 100644
--- a/migration/postcopy-ram.h
+++ b/migration/postcopy-ram.h
@@ -191,7 +191,7 @@ enum PostcopyChannels {
 };
 
 void postcopy_preempt_new_channel(MigrationIncomingState *mis, QEMUFile *file);
-int postcopy_preempt_setup(MigrationState *s, Error **errp);
+void postcopy_preempt_setup(MigrationState *s);
 int postcopy_preempt_wait_channel(MigrationState *s);
 
 #endif
-- 
2.37.3



  reply	other threads:[~2023-02-02 21:25 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-02 21:24 [PATCH v2 0/3] migration: Fix disorder of channel creations Peter Xu
2023-02-02 21:24 ` Peter Xu [this message]
2023-02-08 19:19   ` [PATCH v2 1/3] migration: Rework multi-channel checks on URI Juan Quintela
2023-02-08 20:03     ` Peter Xu
2023-02-02 21:24 ` [PATCH v2 2/3] migration: Add a semaphore to count PONGs Peter Xu
2023-02-08 19:19   ` Juan Quintela
2023-02-02 21:24 ` [PATCH v2 3/3] migration: Postpone postcopy preempt channel to be after main Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230202212458.726496-2-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=berrange@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=lsoaresp@redhat.com \
    --cc=manish.mishra@nutanix.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).