From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 23/33] target/arm: Mark up sysregs for HFGRTR bits 36..63
Date: Fri, 3 Feb 2023 14:29:17 +0000 [thread overview]
Message-ID: <20230203142927.834793-24-peter.maydell@linaro.org> (raw)
In-Reply-To: <20230203142927.834793-1-peter.maydell@linaro.org>
Mark up the sysreg definitions for the registers trapped
by HFGRTR/HFGWTR bits 36..63.
Of these, some correspond to RAS registers which we implement as
always-UNDEF: these don't need any extra handling for FGT because the
UNDEF-to-EL1 always takes priority over any theoretical
FGT-trap-to-EL2.
Bit 50 (NACCDATA_EL1) is for the ACCDATA_EL1 register which is part
of the FEAT_LS64_ACCDATA feature which we don't yet implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-14-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-14-peter.maydell@linaro.org
---
target/arm/cpregs.h | 7 +++++++
hw/intc/arm_gicv3_cpuif.c | 2 ++
target/arm/helper.c | 10 ++++++++++
3 files changed, 19 insertions(+)
diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h
index 1b219242d5d..fef8ad08acc 100644
--- a/target/arm/cpregs.h
+++ b/target/arm/cpregs.h
@@ -615,6 +615,13 @@ typedef enum FGTBit {
DO_BIT(HFGRTR, TPIDR_EL1),
DO_BIT(HFGRTR, TPIDRRO_EL0),
DO_BIT(HFGRTR, TPIDR_EL0),
+ DO_BIT(HFGRTR, TTBR0_EL1),
+ DO_BIT(HFGRTR, TTBR1_EL1),
+ DO_BIT(HFGRTR, VBAR_EL1),
+ DO_BIT(HFGRTR, ICC_IGRPENN_EL1),
+ DO_BIT(HFGRTR, ERRIDR_EL1),
+ DO_REV_BIT(HFGRTR, NSMPRI_EL1),
+ DO_REV_BIT(HFGRTR, NTPIDR2_EL0),
} FGTBit;
#undef DO_BIT
diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
index 9a7fc190994..d07b13eb270 100644
--- a/hw/intc/arm_gicv3_cpuif.c
+++ b/hw/intc/arm_gicv3_cpuif.c
@@ -2378,6 +2378,7 @@ static const ARMCPRegInfo gicv3_cpuif_reginfo[] = {
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 6,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_fiq_access,
+ .fgt = FGT_ICC_IGRPENN_EL1,
.readfn = icc_igrpen_read,
.writefn = icc_igrpen_write,
},
@@ -2386,6 +2387,7 @@ static const ARMCPRegInfo gicv3_cpuif_reginfo[] = {
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 7,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_irq_access,
+ .fgt = FGT_ICC_IGRPENN_EL1,
.readfn = icc_igrpen_read,
.writefn = icc_igrpen_write,
},
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 9f6d9e2a3c9..a48b022def6 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -4158,12 +4158,14 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
{ .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0,
.access = PL1_RW, .accessfn = access_tvm_trvm,
+ .fgt = FGT_TTBR0_EL1,
.writefn = vmsa_ttbr_write, .resetvalue = 0,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
offsetof(CPUARMState, cp15.ttbr0_ns) } },
{ .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1,
.access = PL1_RW, .accessfn = access_tvm_trvm,
+ .fgt = FGT_TTBR1_EL1,
.writefn = vmsa_ttbr_write, .resetvalue = 0,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
offsetof(CPUARMState, cp15.ttbr1_ns) } },
@@ -6488,6 +6490,10 @@ static void disr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val)
* ERRSELR_EL1
* may generate UNDEFINED, which is the effect we get by not
* listing them at all.
+ *
+ * These registers have fine-grained trap bits, but UNDEF-to-EL1
+ * is higher priority than FGT-to-EL2 so we do not need to list them
+ * in order to check for an FGT.
*/
static const ARMCPRegInfo minimal_ras_reginfo[] = {
{ .name = "DISR_EL1", .state = ARM_CP_STATE_BOTH,
@@ -6497,6 +6503,7 @@ static const ARMCPRegInfo minimal_ras_reginfo[] = {
{ .name = "ERRIDR_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 5, .crm = 3, .opc2 = 0,
.access = PL1_R, .accessfn = access_terr,
+ .fgt = FGT_ERRIDR_EL1,
.type = ARM_CP_CONST, .resetvalue = 0 },
{ .name = "VDISR_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 1, .opc2 = 1,
@@ -6819,6 +6826,7 @@ static const ARMCPRegInfo sme_reginfo[] = {
{ .name = "TPIDR2_EL0", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 3, .crn = 13, .crm = 0, .opc2 = 5,
.access = PL0_RW, .accessfn = access_tpidr2,
+ .fgt = FGT_NTPIDR2_EL0,
.fieldoffset = offsetof(CPUARMState, cp15.tpidr2_el0) },
{ .name = "SVCR", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 2,
@@ -6856,6 +6864,7 @@ static const ARMCPRegInfo sme_reginfo[] = {
{ .name = "SMPRI_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 4,
.access = PL1_RW, .accessfn = access_esm,
+ .fgt = FGT_NSMPRI_EL1,
.type = ARM_CP_CONST, .resetvalue = 0 },
{ .name = "SMPRIMAP_EL2", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 5,
@@ -8884,6 +8893,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
{ .name = "VBAR", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0,
.access = PL1_RW, .writefn = vbar_write,
+ .fgt = FGT_VBAR_EL1,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.vbar_s),
offsetof(CPUARMState, cp15.vbar_ns) },
.resetvalue = 0 },
--
2.34.1
next prev parent reply other threads:[~2023-02-03 14:31 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-03 14:28 [PULL 00/33] target-arm queue Peter Maydell
2023-02-03 14:28 ` [PULL 01/33] hw/arm: Use TYPE_ARM_SMMUV3 Peter Maydell
2023-02-03 14:28 ` [PULL 02/33] target/arm: Fix physical address resolution for Stage2 Peter Maydell
2023-02-03 14:28 ` [PULL 03/33] hw/char/pl011: refactor FIFO depth handling code Peter Maydell
2023-02-03 14:28 ` [PULL 04/33] hw/char/pl011: add post_load hook for backwards-compatibility Peter Maydell
2023-02-03 14:28 ` [PULL 05/33] hw/char/pl011: implement a reset method Peter Maydell
2023-02-03 14:29 ` [PULL 06/33] hw/char/pl011: better handling of FIFO flags on LCR reset Peter Maydell
2023-02-03 14:29 ` [PULL 07/33] hvf: arm: Add support for GICv3 Peter Maydell
2023-02-03 14:29 ` [PULL 08/33] hw/arm/virt: Consolidate GIC finalize logic Peter Maydell
2023-02-03 14:29 ` [PULL 09/33] hw/arm/virt: Make accels in GIC finalize logic explicit Peter Maydell
2023-02-03 14:29 ` [PULL 10/33] sbsa-ref: remove cortex-a76 from list of supported cpus Peter Maydell
2023-02-03 14:29 ` [PULL 11/33] target/arm: Name AT_S1E1RP and AT_S1E1WP cpregs correctly Peter Maydell
2023-02-03 14:29 ` [PULL 12/33] target/arm: Correct syndrome for ATS12NSO* at Secure EL1 Peter Maydell
2023-02-03 14:29 ` [PULL 13/33] target/arm: Remove CP_ACCESS_TRAP_UNCATEGORIZED_{EL2, EL3} Peter Maydell
2023-02-03 14:29 ` [PULL 14/33] target/arm: Move do_coproc_insn() syndrome calculation earlier Peter Maydell
2023-02-03 14:29 ` [PULL 15/33] target/arm: All UNDEF-at-EL0 traps take priority over HSTR_EL2 traps Peter Maydell
2023-02-03 14:29 ` [PULL 16/33] target/arm: Make HSTR_EL2 traps take priority over UNDEF-at-EL1 Peter Maydell
2023-02-03 14:29 ` [PULL 17/33] target/arm: Disable HSTR_EL2 traps if EL2 is not enabled Peter Maydell
2023-02-03 14:29 ` [PULL 18/33] target/arm: Define the FEAT_FGT registers Peter Maydell
2023-02-03 14:29 ` [PULL 19/33] target/arm: Implement FGT trapping infrastructure Peter Maydell
2023-02-03 14:29 ` [PULL 20/33] target/arm: Mark up sysregs for HFGRTR bits 0..11 Peter Maydell
2023-02-03 14:29 ` [PULL 21/33] target/arm: Mark up sysregs for HFGRTR bits 12..23 Peter Maydell
2023-02-03 14:29 ` [PULL 22/33] target/arm: Mark up sysregs for HFGRTR bits 24..35 Peter Maydell
2023-02-03 14:29 ` Peter Maydell [this message]
2023-02-03 14:29 ` [PULL 24/33] target/arm: Mark up sysregs for HDFGRTR bits 0..11 Peter Maydell
2023-02-03 14:29 ` [PULL 25/33] target/arm: Mark up sysregs for HDFGRTR bits 12..63 Peter Maydell
2023-02-03 14:29 ` [PULL 26/33] target/arm: Mark up sysregs for HFGITR bits 0..11 Peter Maydell
2023-02-03 14:29 ` [PULL 27/33] target/arm: Mark up sysregs for HFGITR bits 12..17 Peter Maydell
2023-02-03 14:29 ` [PULL 28/33] target/arm: Mark up sysregs for HFGITR bits 18..47 Peter Maydell
2023-02-03 14:29 ` [PULL 29/33] target/arm: Mark up sysregs for HFGITR bits 48..63 Peter Maydell
2023-02-03 14:29 ` [PULL 30/33] target/arm: Implement the HFGITR_EL2.ERET trap Peter Maydell
2023-02-03 14:29 ` [PULL 31/33] target/arm: Implement the HFGITR_EL2.SVC_EL0 and SVC_EL1 traps Peter Maydell
2023-02-03 14:29 ` [PULL 32/33] target/arm: Implement MDCR_EL2.TDCC and MDCR_EL3.TDCC traps Peter Maydell
2023-02-03 14:29 ` [PULL 33/33] target/arm: Enable FEAT_FGT on '-cpu max' Peter Maydell
2023-02-03 18:54 ` [PULL 00/33] target-arm queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230203142927.834793-24-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).