From: "Volker Rümelin" <vr_qemu@t-online.de>
To: "Gerd Hoffmann" <kraxel@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@gmail.com>
Cc: qemu-devel@nongnu.org,
Christian Schoenebeck <qemu_oss@crudebyte.com>,
Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Subject: [PATCH v2 02/17] audio: change type and name of the resample buffer
Date: Mon, 6 Feb 2023 19:52:22 +0100 [thread overview]
Message-ID: <20230206185237.8358-2-vr_qemu@t-online.de> (raw)
In-Reply-To: <df6510fe-1dfd-1585-8590-db230c71d367@t-online.de>
Change the type of the resample buffer from struct st_sample *
to STSampleBuffer. Also change the name from buf to resample_buf
for better readability.
The new variables resample_buf.size and resample_buf.pos will be
used after the next patches. There is no functional change.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
---
audio/audio.c | 15 ++++++++-------
audio/audio_int.h | 4 ++--
audio/audio_template.h | 10 ++++++----
3 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/audio/audio.c b/audio/audio.c
index a0b54e4a2e..a399147486 100644
--- a/audio/audio.c
+++ b/audio/audio.c
@@ -555,7 +555,7 @@ static size_t audio_pcm_sw_read(SWVoiceIn *sw, void *buf, size_t size)
{
HWVoiceIn *hw = sw->hw;
size_t samples, live, ret = 0, swlim, isamp, osamp, rpos, total = 0;
- struct st_sample *src, *dst = sw->buf;
+ struct st_sample *src, *dst = sw->resample_buf.buffer;
live = hw->total_samples_captured - sw->total_hw_samples_acquired;
if (!live) {
@@ -595,10 +595,10 @@ static size_t audio_pcm_sw_read(SWVoiceIn *sw, void *buf, size_t size)
}
if (!hw->pcm_ops->volume_in) {
- mixeng_volume (sw->buf, ret, &sw->vol);
+ mixeng_volume(sw->resample_buf.buffer, ret, &sw->vol);
}
- sw->clip (buf, sw->buf, ret);
+ sw->clip(buf, sw->resample_buf.buffer, ret);
sw->total_hw_samples_acquired += total;
return ret * sw->info.bytes_per_frame;
}
@@ -706,10 +706,10 @@ static size_t audio_pcm_sw_write(SWVoiceOut *sw, void *buf, size_t size)
samples = ((int64_t)MIN(dead, hw_free) << 32) / sw->ratio;
samples = MIN(samples, size / sw->info.bytes_per_frame);
if (samples) {
- sw->conv(sw->buf, buf, samples);
+ sw->conv(sw->resample_buf.buffer, buf, samples);
if (!sw->hw->pcm_ops->volume_out) {
- mixeng_volume(sw->buf, samples, &sw->vol);
+ mixeng_volume(sw->resample_buf.buffer, samples, &sw->vol);
}
}
@@ -724,7 +724,7 @@ static size_t audio_pcm_sw_write(SWVoiceOut *sw, void *buf, size_t size)
osamp = blck;
st_rate_flow_mix (
sw->rate,
- sw->buf + pos,
+ sw->resample_buf.buffer + pos,
sw->hw->mix_buf.buffer + wpos,
&isamp,
&osamp
@@ -1061,7 +1061,8 @@ static void audio_capture_mix_and_clear(HWVoiceOut *hw, size_t rpos,
size_t bytes = to_write * hw->info.bytes_per_frame;
size_t written;
- sw->buf = hw->mix_buf.buffer + rpos2;
+ sw->resample_buf.buffer = hw->mix_buf.buffer + rpos2;
+ sw->resample_buf.size = to_write;
written = audio_pcm_sw_write (sw, NULL, bytes);
if (written - bytes) {
dolog("Could not mix %zu bytes into a capture "
diff --git a/audio/audio_int.h b/audio/audio_int.h
index 061845dcc2..8b163e1759 100644
--- a/audio/audio_int.h
+++ b/audio/audio_int.h
@@ -109,7 +109,7 @@ struct SWVoiceOut {
struct audio_pcm_info info;
t_sample *conv;
int64_t ratio;
- struct st_sample *buf;
+ STSampleBuffer resample_buf;
void *rate;
size_t total_hw_samples_mixed;
int active;
@@ -129,7 +129,7 @@ struct SWVoiceIn {
int64_t ratio;
void *rate;
size_t total_hw_samples_acquired;
- struct st_sample *buf;
+ STSampleBuffer resample_buf;
f_sample *clip;
HWVoiceIn *hw;
char *name;
diff --git a/audio/audio_template.h b/audio/audio_template.h
index dd87170cbd..a0b653f52c 100644
--- a/audio/audio_template.h
+++ b/audio/audio_template.h
@@ -95,13 +95,13 @@ static void glue(audio_pcm_hw_alloc_resources_, TYPE)(HW *hw)
static void glue (audio_pcm_sw_free_resources_, TYPE) (SW *sw)
{
- g_free (sw->buf);
+ g_free(sw->resample_buf.buffer);
+ sw->resample_buf.buffer = NULL;
+ sw->resample_buf.size = 0;
if (sw->rate) {
st_rate_stop (sw->rate);
}
-
- sw->buf = NULL;
sw->rate = NULL;
}
@@ -138,7 +138,9 @@ static int glue (audio_pcm_sw_alloc_resources_, TYPE) (SW *sw)
return -1;
}
- sw->buf = g_new0(st_sample, samples);
+ sw->resample_buf.buffer = g_new0(st_sample, samples);
+ sw->resample_buf.size = samples;
+ sw->resample_buf.pos = 0;
#ifdef DAC
sw->rate = st_rate_start (sw->info.freq, sw->hw->info.freq);
--
2.35.3
next prev parent reply other threads:[~2023-02-06 18:53 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-06 18:47 [PATCH v2 00/17] audio: improve callback interface for audio frontends Volker Rümelin
2023-02-06 18:52 ` [PATCH v2 01/17] audio: change type of mix_buf and conv_buf Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` Volker Rümelin [this message]
2023-02-22 10:49 ` [PATCH v2 02/17] audio: change type and name of the resample buffer Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 03/17] audio: make the resampling code greedy Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 04/17] audio: replace the resampling loop in audio_pcm_sw_write() Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 05/17] audio: remove sw == NULL check Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 06/17] audio: rename variables in audio_pcm_sw_write() Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 07/17] audio: don't misuse audio_pcm_sw_write() Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 08/17] audio: remove unused noop_conv() function Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 09/17] audio/mixeng: calculate number of input frames Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 10/17] audio: wire up st_rate_frames_in() Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 11/17] audio: replace the resampling loop in audio_pcm_sw_read() Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 12/17] audio: rename variables " Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 13/17] audio/mixeng: calculate number of output frames Volker Rümelin
2023-02-06 18:52 ` [PATCH v2 14/17] audio: wire up st_rate_frames_out() Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 15/17] audio: handle leftover audio frame from upsampling Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 16/17] audio/audio_template: substitute sw->hw with hw Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 17/17] audio: remove sw->ratio Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230206185237.8358-2-vr_qemu@t-online.de \
--to=vr_qemu@t-online.de \
--cc=kraxel@redhat.com \
--cc=marcandre.lureau@gmail.com \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=qemu-devel@nongnu.org \
--cc=qemu_oss@crudebyte.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).