From: "Volker Rümelin" <vr_qemu@t-online.de>
To: "Gerd Hoffmann" <kraxel@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@gmail.com>
Cc: qemu-devel@nongnu.org,
Christian Schoenebeck <qemu_oss@crudebyte.com>,
Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Subject: [PATCH v2 07/17] audio: don't misuse audio_pcm_sw_write()
Date: Mon, 6 Feb 2023 19:52:27 +0100 [thread overview]
Message-ID: <20230206185237.8358-7-vr_qemu@t-online.de> (raw)
In-Reply-To: <df6510fe-1dfd-1585-8590-db230c71d367@t-online.de>
The audio_pcm_sw_write() function is intended to convert a
PCM audio stream to the internal representation, adjust the
volume, and then mix it with the other audio streams with a
possibly changed sample rate in mix_buf. In order for the
audio_capture_mix_and_clear() function to use audio_pcm_sw_write(),
it must bypass the first two tasks of audio_pcm_sw_write().
Since patch "audio: split out the resampling loop in
audio_pcm_sw_write()" this is no longer necessary, because now
the audio_pcm_sw_resample_out() function can be used instead of
audio_pcm_sw_write().
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
---
audio/audio.c | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/audio/audio.c b/audio/audio.c
index cd10f1ec10..44eb7b63b4 100644
--- a/audio/audio.c
+++ b/audio/audio.c
@@ -1056,26 +1056,33 @@ static void audio_capture_mix_and_clear(HWVoiceOut *hw, size_t rpos,
for (sc = hw->cap_head.lh_first; sc; sc = sc->entries.le_next) {
SWVoiceOut *sw = &sc->sw;
- int rpos2 = rpos;
+ size_t rpos2 = rpos;
n = samples;
while (n) {
size_t till_end_of_hw = hw->mix_buf.size - rpos2;
- size_t to_write = MIN(till_end_of_hw, n);
- size_t bytes = to_write * hw->info.bytes_per_frame;
- size_t written;
+ size_t to_read = MIN(till_end_of_hw, n);
+ size_t live, frames_in, frames_out;
sw->resample_buf.buffer = hw->mix_buf.buffer + rpos2;
- sw->resample_buf.size = to_write;
- written = audio_pcm_sw_write (sw, NULL, bytes);
- if (written - bytes) {
- dolog("Could not mix %zu bytes into a capture "
+ sw->resample_buf.size = to_read;
+ live = sw->total_hw_samples_mixed;
+
+ audio_pcm_sw_resample_out(sw,
+ to_read, sw->hw->mix_buf.size - live,
+ &frames_in, &frames_out);
+
+ sw->total_hw_samples_mixed += frames_out;
+ sw->empty = sw->total_hw_samples_mixed == 0;
+
+ if (to_read - frames_in) {
+ dolog("Could not mix %zu frames into a capture "
"buffer, mixed %zu\n",
- bytes, written);
+ to_read, frames_in);
break;
}
- n -= to_write;
- rpos2 = (rpos2 + to_write) % hw->mix_buf.size;
+ n -= to_read;
+ rpos2 = (rpos2 + to_read) % hw->mix_buf.size;
}
}
}
--
2.35.3
next prev parent reply other threads:[~2023-02-06 18:57 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-06 18:47 [PATCH v2 00/17] audio: improve callback interface for audio frontends Volker Rümelin
2023-02-06 18:52 ` [PATCH v2 01/17] audio: change type of mix_buf and conv_buf Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 02/17] audio: change type and name of the resample buffer Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 03/17] audio: make the resampling code greedy Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 04/17] audio: replace the resampling loop in audio_pcm_sw_write() Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 05/17] audio: remove sw == NULL check Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 06/17] audio: rename variables in audio_pcm_sw_write() Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` Volker Rümelin [this message]
2023-02-22 10:49 ` [PATCH v2 07/17] audio: don't misuse audio_pcm_sw_write() Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 08/17] audio: remove unused noop_conv() function Volker Rümelin
2023-02-22 10:49 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 09/17] audio/mixeng: calculate number of input frames Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 10/17] audio: wire up st_rate_frames_in() Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 11/17] audio: replace the resampling loop in audio_pcm_sw_read() Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 12/17] audio: rename variables " Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 13/17] audio/mixeng: calculate number of output frames Volker Rümelin
2023-02-06 18:52 ` [PATCH v2 14/17] audio: wire up st_rate_frames_out() Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 15/17] audio: handle leftover audio frame from upsampling Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 16/17] audio/audio_template: substitute sw->hw with hw Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
2023-02-06 18:52 ` [PATCH v2 17/17] audio: remove sw->ratio Volker Rümelin
2023-02-22 10:50 ` Marc-André Lureau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230206185237.8358-7-vr_qemu@t-online.de \
--to=vr_qemu@t-online.de \
--cc=kraxel@redhat.com \
--cc=marcandre.lureau@gmail.com \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=qemu-devel@nongnu.org \
--cc=qemu_oss@crudebyte.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).