From: Fabiano Rosas <farosas@suse.de>
To: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org, "Peter Maydell" <peter.maydell@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Alex Bennée" <alex.bennee@linaro.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Claudio Fontana" <cfontana@suse.de>,
"Eduardo Habkost" <ehabkost@redhat.com>,
"Alexander Graf" <agraf@csgraf.de>,
"Cornelia Huck" <cohuck@redhat.com>
Subject: [PATCH v6 11/29] target/arm: Wrap arm_rebuild_hflags calls with tcg_enabled
Date: Fri, 17 Feb 2023 17:11:32 -0300 [thread overview]
Message-ID: <20230217201150.22032-12-farosas@suse.de> (raw)
In-Reply-To: <20230217201150.22032-1-farosas@suse.de>
This is in preparation to moving the hflags code into its own file
under the tcg/ directory.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/arm/boot.c | 6 +++++-
hw/intc/armv7m_nvic.c | 20 +++++++++++++-------
target/arm/arm-powerctl.c | 7 +++++--
target/arm/cpu.c | 3 ++-
target/arm/helper.c | 18 +++++++++++++-----
target/arm/machine.c | 5 ++++-
6 files changed, 42 insertions(+), 17 deletions(-)
diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index 3d7d11f782..1e021c4a34 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -15,6 +15,7 @@
#include "hw/arm/boot.h"
#include "hw/arm/linux-boot-if.h"
#include "sysemu/kvm.h"
+#include "sysemu/tcg.h"
#include "sysemu/sysemu.h"
#include "sysemu/numa.h"
#include "hw/boards.h"
@@ -827,7 +828,10 @@ static void do_cpu_reset(void *opaque)
info->secondary_cpu_reset_hook(cpu, info);
}
}
- arm_rebuild_hflags(env);
+
+ if (tcg_enabled()) {
+ arm_rebuild_hflags(env);
+ }
}
}
diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index 1f7763964c..74ac8f610c 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -18,6 +18,7 @@
#include "hw/intc/armv7m_nvic.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
+#include "sysemu/tcg.h"
#include "sysemu/runstate.h"
#include "target/arm/cpu.h"
#include "exec/exec-all.h"
@@ -2466,8 +2467,10 @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr,
/* This is UNPREDICTABLE; treat as RAZ/WI */
exit_ok:
- /* Ensure any changes made are reflected in the cached hflags. */
- arm_rebuild_hflags(&s->cpu->env);
+ if (tcg_enabled()) {
+ /* Ensure any changes made are reflected in the cached hflags. */
+ arm_rebuild_hflags(&s->cpu->env);
+ }
return MEMTX_OK;
}
@@ -2648,11 +2651,14 @@ static void armv7m_nvic_reset(DeviceState *dev)
}
}
- /*
- * We updated state that affects the CPU's MMUidx and thus its hflags;
- * and we can't guarantee that we run before the CPU reset function.
- */
- arm_rebuild_hflags(&s->cpu->env);
+ if (tcg_enabled()) {
+ /*
+ * We updated state that affects the CPU's MMUidx and thus its
+ * hflags; and we can't guarantee that we run before the CPU
+ * reset function.
+ */
+ arm_rebuild_hflags(&s->cpu->env);
+ }
}
static void nvic_systick_trigger(void *opaque, int n, int level)
diff --git a/target/arm/arm-powerctl.c b/target/arm/arm-powerctl.c
index b75f813b40..326a03153d 100644
--- a/target/arm/arm-powerctl.c
+++ b/target/arm/arm-powerctl.c
@@ -15,6 +15,7 @@
#include "arm-powerctl.h"
#include "qemu/log.h"
#include "qemu/main-loop.h"
+#include "sysemu/tcg.h"
#ifndef DEBUG_ARM_POWERCTL
#define DEBUG_ARM_POWERCTL 0
@@ -127,8 +128,10 @@ static void arm_set_cpu_on_async_work(CPUState *target_cpu_state,
target_cpu->env.regs[0] = info->context_id;
}
- /* CP15 update requires rebuilding hflags */
- arm_rebuild_hflags(&target_cpu->env);
+ if (tcg_enabled()) {
+ /* CP15 update requires rebuilding hflags */
+ arm_rebuild_hflags(&target_cpu->env);
+ }
/* Start the new CPU at the requested address */
cpu_set_pc(target_cpu_state, info->entry);
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index d7ceb626f0..ce1a425e10 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -539,8 +539,9 @@ static void arm_cpu_reset_hold(Object *obj)
if (tcg_enabled()) {
hw_breakpoint_update_all(cpu);
hw_watchpoint_update_all(cpu);
+
+ arm_rebuild_hflags(env);
}
- arm_rebuild_hflags(env);
}
#if defined(CONFIG_TCG) && !defined(CONFIG_USER_ONLY)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index bd704396e0..2c4336bab6 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -5173,7 +5173,7 @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri,
/* This may enable/disable the MMU, so do a TLB flush. */
tlb_flush(CPU(cpu));
- if (ri->type & ARM_CP_SUPPRESS_TB_END) {
+ if (tcg_enabled() && ri->type & ARM_CP_SUPPRESS_TB_END) {
/*
* Normally we would always end the TB on an SCTLR write; see the
* comment in ARMCPRegInfo sctlr initialization below for why Xscale
@@ -6841,7 +6841,9 @@ void aarch64_set_svcr(CPUARMState *env, uint64_t new, uint64_t mask)
memset(env->zarray, 0, sizeof(env->zarray));
}
- arm_rebuild_hflags(env);
+ if (tcg_enabled()) {
+ arm_rebuild_hflags(env);
+ }
}
static void svcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -9878,7 +9880,7 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
}
mask &= ~CACHED_CPSR_BITS;
env->uncached_cpsr = (env->uncached_cpsr & ~mask) | (val & mask);
- if (rebuild_hflags) {
+ if (tcg_enabled() && rebuild_hflags) {
arm_rebuild_hflags(env);
}
}
@@ -10437,7 +10439,10 @@ static void take_aarch32_exception(CPUARMState *env, int new_mode,
env->regs[14] = env->regs[15] + offset;
}
env->regs[15] = newpc;
- arm_rebuild_hflags(env);
+
+ if (tcg_enabled()) {
+ arm_rebuild_hflags(env);
+ }
}
static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs)
@@ -10993,7 +10998,10 @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs)
pstate_write(env, PSTATE_DAIF | new_mode);
env->aarch64 = true;
aarch64_restore_sp(env, new_el);
- helper_rebuild_hflags_a64(env, new_el);
+
+ if (tcg_enabled()) {
+ helper_rebuild_hflags_a64(env, new_el);
+ }
env->pc = addr;
diff --git a/target/arm/machine.c b/target/arm/machine.c
index fd6323f6d8..fc4a4a4064 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -871,7 +871,10 @@ static int cpu_post_load(void *opaque, int version_id)
if (!kvm_enabled()) {
pmu_op_finish(&cpu->env);
}
- arm_rebuild_hflags(&cpu->env);
+
+ if (tcg_enabled()) {
+ arm_rebuild_hflags(&cpu->env);
+ }
return 0;
}
--
2.35.3
next prev parent reply other threads:[~2023-02-17 20:19 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-17 20:11 [PATCH v6 00/29] target/arm: Allow CONFIG_TCG=n builds Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 01/29] target/arm: rename handle_semihosting to tcg_handle_semihosting Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 02/29] target/arm: wrap psci call with tcg_enabled Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 03/29] target/arm: wrap call to aarch64_sve_change_el in tcg_enabled() Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 04/29] target/arm: Move PC alignment check Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 05/29] target/arm: Move cpregs code out of cpu.h Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 06/29] target/arm: Wrap breakpoint/watchpoint updates with tcg_enabled Fabiano Rosas
2023-02-18 4:06 ` Richard Henderson
2023-02-17 20:11 ` [PATCH v6 07/29] target/arm: Wrap TCG-only code in debug_helper.c Fabiano Rosas
2023-02-18 4:10 ` Richard Henderson
2023-02-17 20:11 ` [PATCH v6 08/29] target/arm: move translate modules to tcg/ Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 09/29] target/arm: move helpers " Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 10/29] target/arm: Move psci.c into the tcg directory Fabiano Rosas
2023-02-17 20:11 ` Fabiano Rosas [this message]
2023-02-17 20:11 ` [PATCH v6 12/29] target/arm: Move hflags code " Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 13/29] target/arm: Move regime_using_lpae_format into internal.h Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 14/29] target/arm: Don't access TCG code when debugging with KVM Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 15/29] cpu-defs.h: Expose CPUTLBEntryFull to non-TCG code Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 16/29] target/arm: Move cortex sysregs into cpu64.c Fabiano Rosas
2023-02-18 4:26 ` Richard Henderson
2023-02-17 20:11 ` [PATCH v6 17/29] tests/avocado: Skip tests that require a missing accelerator Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 18/29] tests/avocado: Tag TCG tests with accel:tcg Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 19/29] target/arm: Move 64-bit TCG CPUs into tcg/ Fabiano Rosas
2023-02-21 14:16 ` Peter Maydell
2023-02-22 13:58 ` Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 20/29] target/arm: move cpu_tcg to tcg/cpu32.c Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 21/29] target/arm: Use "max" as default cpu for the virt machine with KVM Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 22/29] tests/qtest: arm-cpu-features: Match tests to required accelerators Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 23/29] tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 24/29] target/avocado: Pass parameters to migration test Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 25/29] tests/avocado: add machine:none tag to version.py Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 26/29] arm/Kconfig: Always select SEMIHOSTING when TCG is present Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 27/29] arm/Kconfig: Do not build TCG-only boards on a KVM-only build Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 28/29] gitlab-ci: Check building KVM-only aarch64 target Fabiano Rosas
2023-02-17 20:11 ` [PATCH v6 29/29] tests/qtest: Fix tests when no KVM or TCG are present Fabiano Rosas
2023-02-21 14:21 ` [PATCH v6 00/29] target/arm: Allow CONFIG_TCG=n builds Peter Maydell
2023-02-22 12:40 ` Fabiano Rosas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230217201150.22032-12-farosas@suse.de \
--to=farosas@suse.de \
--cc=agraf@csgraf.de \
--cc=alex.bennee@linaro.org \
--cc=cfontana@suse.de \
--cc=cohuck@redhat.com \
--cc=ehabkost@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).